! Started logfile: J2308+0946_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:25:48 2019 obs J2308+0946_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2308+0946_S_2017_01_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765873 visibilities/baseline/integration-bin. ! Found source: J2308+0946 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2308+0946_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.782978Jy sigma=0.006072 ! Fit after self-cal, rms=0.773883Jy sigma=0.006030 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=8.742 mas, bpa=17.18 degrees ! Estimated noise=1122.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188959 Jy ! Component: 100 - total flux cleaned = 0.230285 Jy ! Total flux subtracted in 100 components = 0.230285 Jy ! Clean residual min=-0.008023 max=0.012615 Jy/beam ! Clean residual mean=0.000111 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 0.230285 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.230285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116829Jy sigma=0.000729 ! Fit after self-cal, rms=0.116793Jy sigma=0.000729 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.246 mas, bmaj=9.196 mas, bpa=16.91 degrees ! Estimated noise=908.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125215 Jy ! Component: 100 - total flux cleaned = 0.017284 Jy ! Component: 150 - total flux cleaned = 0.0176817 Jy ! Component: 200 - total flux cleaned = 0.0181556 Jy ! Total flux subtracted in 200 components = 0.0181556 Jy ! Clean residual min=-0.006348 max=0.009071 Jy/beam ! Clean residual mean=0.000123 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.248441 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.24844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115727Jy sigma=0.000712 ! Fit after self-cal, rms=0.115716Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.94 KP 0.98 ! LA 1.00 MK 1.00* NL 0.87 OV 0.95 ! PT 1.09 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.99 KP 0.95 ! LA 0.93 MK 1.00* NL 0.99 OV 1.02 ! PT 1.08 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 0.98 KP 1.00 ! LA 0.98 MK 1.00* NL 0.97 OV 0.92 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.96 KP 1.00* ! LA 1.26 MK 1.00* NL 1.00* OV 0.93 ! PT 1.09 SC 1.46 ! ! ! Fit before self-cal, rms=0.115716Jy sigma=0.000712 ! Fit after self-cal, rms=0.138361Jy sigma=0.000691 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.251 mas, bmaj=9.168 mas, bpa=16.41 degrees ! Estimated noise=895.571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139947 Jy ! Component: 100 - total flux cleaned = -0.00192816 Jy ! Component: 150 - total flux cleaned = -0.00230236 Jy ! Component: 200 - total flux cleaned = -0.00237215 Jy ! Total flux subtracted in 200 components = -0.00237215 Jy ! Clean residual min=-0.005312 max=0.005917 Jy/beam ! Clean residual mean=0.000103 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.246068 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.246068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138263Jy sigma=0.000690 ! Fit after self-cal, rms=0.138631Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138631Jy sigma=0.000690 ! Fit after self-cal, rms=0.126781Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.24 mas, bmaj=9.141 mas, bpa=16.28 degrees ! Estimated noise=897.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490912 Jy ! Component: 100 - total flux cleaned = 0.000744592 Jy ! Component: 150 - total flux cleaned = 0.000898218 Jy ! Component: 200 - total flux cleaned = 0.00099339 Jy ! Total flux subtracted in 200 components = 0.00099339 Jy ! Clean residual min=-0.002256 max=0.002180 Jy/beam ! Clean residual mean=0.000015 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.247062 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.247062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126756Jy sigma=0.000664 ! Fit after self-cal, rms=0.127018Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.7938e-05 Jy ! Component: 100 - total flux cleaned = 0.000113145 Jy ! Component: 150 - total flux cleaned = 0.000112492 Jy ! Component: 200 - total flux cleaned = 0.000137803 Jy ! Total flux subtracted in 200 components = 0.000137803 Jy ! Clean residual min=-0.002252 max=0.002140 Jy/beam ! Clean residual mean=0.000016 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.247199 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.247199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127011Jy sigma=0.000664 ! Fit after self-cal, rms=0.127012Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127012Jy sigma=0.000664 ! Fit after self-cal, rms=0.127486Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=9.124 mas, bpa=16.26 degrees ! Estimated noise=897.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276367 Jy ! Component: 100 - total flux cleaned = 0.000356665 Jy ! Component: 150 - total flux cleaned = 0.000457841 Jy ! Component: 200 - total flux cleaned = 0.000522711 Jy ! Total flux subtracted in 200 components = 0.000522711 Jy ! Clean residual min=-0.002095 max=0.002106 Jy/beam ! Clean residual mean=0.000014 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.247722 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.247722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127475Jy sigma=0.000663 ! Fit after self-cal, rms=0.127481Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110997 Jy ! Component: 100 - total flux cleaned = 0.000122795 Jy ! Component: 150 - total flux cleaned = 0.000142107 Jy ! Component: 200 - total flux cleaned = 0.000158738 Jy ! Total flux subtracted in 200 components = 0.000158738 Jy ! Clean residual min=-0.002106 max=0.002099 Jy/beam ! Clean residual mean=0.000014 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.247881 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.247881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127476Jy sigma=0.000663 ! Fit after self-cal, rms=0.127470Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127470Jy sigma=0.000663 ! Fit after self-cal, rms=0.127545Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.887 mas, bmaj=11.12 mas, bpa=7.388 degrees ! Estimated noise=1060.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369306 Jy ! Component: 100 - total flux cleaned = 0.000440123 Jy ! Component: 150 - total flux cleaned = 0.000481394 Jy ! Component: 200 - total flux cleaned = 0.000511756 Jy ! Total flux subtracted in 200 components = 0.000511756 Jy ! Clean residual min=-0.002193 max=0.002289 Jy/beam ! Clean residual mean=0.000024 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.248393 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.248393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127544Jy sigma=0.000663 ! Fit after self-cal, rms=0.127537Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02515e-05 Jy ! Component: 100 - total flux cleaned = 5.49675e-06 Jy ! Component: 150 - total flux cleaned = 5.32442e-06 Jy ! Component: 200 - total flux cleaned = 5.59142e-06 Jy ! Total flux subtracted in 200 components = 5.59142e-06 Jy ! Clean residual min=-0.002191 max=0.002279 Jy/beam ! Clean residual mean=0.000024 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.248398 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.248398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127537Jy sigma=0.000663 ! Fit after self-cal, rms=0.127531Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.225 mas, bmaj=9.114 mas, bpa=16.24 degrees ! Estimated noise=897.928 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.225 x 9.114 at 16.24 degrees (North through East) ! Clean map min=-0.0019753 max=0.23542 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=8.663 mas, bpa=16.51 degrees ! Estimated noise=1099.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18506 Jy ! Component: 100 - total flux cleaned = 0.225474 Jy ! Component: 150 - total flux cleaned = 0.237315 Jy ! Component: 200 - total flux cleaned = 0.242339 Jy ! Total flux subtracted in 200 components = 0.242339 Jy ! Clean residual min=-0.002823 max=0.002536 Jy/beam ! Clean residual mean=0.000020 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.242339 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.242339 Jy ! Inverting map and beam ! Estimated beam: bmin=4.225 mas, bmaj=9.114 mas, bpa=16.24 degrees ! Estimated noise=897.928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282491 Jy ! Component: 100 - total flux cleaned = 0.00352537 Jy ! Component: 150 - total flux cleaned = 0.00389428 Jy ! Component: 200 - total flux cleaned = 0.00414952 Jy ! Total flux subtracted in 200 components = 0.00414952 Jy ! Clean residual min=-0.002179 max=0.002038 Jy/beam ! Clean residual mean=0.000013 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.246488 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.246488 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.887 mas, bmaj=11.12 mas, bpa=7.388 degrees ! Estimated noise=1060.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433917 Jy ! Component: 100 - total flux cleaned = 0.00029759 Jy ! Component: 150 - total flux cleaned = 0.000214983 Jy ! Component: 200 - total flux cleaned = 0.000166738 Jy ! Total flux subtracted in 200 components = 0.000166738 Jy ! Clean residual min=-0.002287 max=0.002255 Jy/beam ! Clean residual mean=0.000023 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.246655 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.28517e-05 Jy ! Component: 100 - total flux cleaned = -9.89271e-05 Jy ! Component: 150 - total flux cleaned = -0.000164053 Jy ! Component: 200 - total flux cleaned = -0.000208078 Jy ! Total flux subtracted in 200 components = -0.000208078 Jy ! Clean residual min=-0.002293 max=0.002245 Jy/beam ! Clean residual mean=0.000023 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.246447 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 80 components and 0.246447 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.225 mas, bmaj=9.114 mas, bpa=16.24 degrees ! Estimated noise=897.928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166262 Jy ! Component: 100 - total flux cleaned = 0.000136607 Jy ! Component: 150 - total flux cleaned = 0.000109967 Jy ! Component: 200 - total flux cleaned = 6.23645e-05 Jy ! Total flux subtracted in 200 components = 6.23645e-05 Jy ! Clean residual min=-0.002096 max=0.002006 Jy/beam ! Clean residual mean=0.000013 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.24651 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.24651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127533Jy sigma=0.000663 ! Fit after self-cal, rms=0.127518Jy sigma=0.000663 wmodel J2308+0946_S_2017_01_16_pus_map.mod ! Writing 98 model components to file: J2308+0946_S_2017_01_16_pus_map.mod wobs J2308+0946_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2308+0946_S_2017_01_16_pus_uvs.fits wwins J2308+0946_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2308+0946_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.09622e-05 Jy ! Component: 100 - total flux cleaned = 0.000134464 Jy ! Component: 150 - total flux cleaned = 6.87902e-05 Jy ! Component: 200 - total flux cleaned = 3.74796e-05 Jy ! Component: 250 - total flux cleaned = -8.55065e-05 Jy ! Component: 300 - total flux cleaned = -0.000352307 Jy ! Component: 350 - total flux cleaned = -0.000495755 Jy ! Component: 400 - total flux cleaned = -0.000524232 Jy ! Component: 450 - total flux cleaned = -0.000634172 Jy ! Component: 500 - total flux cleaned = -0.000661134 Jy ! Component: 550 - total flux cleaned = -0.000661405 Jy ! Component: 600 - total flux cleaned = -0.000739108 Jy ! Component: 650 - total flux cleaned = -0.000789396 Jy ! Component: 700 - total flux cleaned = -0.000789676 Jy ! Component: 750 - total flux cleaned = -0.000863182 Jy ! Component: 800 - total flux cleaned = -0.000839134 Jy ! Component: 850 - total flux cleaned = -0.000863227 Jy ! Component: 900 - total flux cleaned = -0.000909223 Jy ! Component: 950 - total flux cleaned = -0.000886113 Jy ! Component: 1000 - total flux cleaned = -0.000953716 Jy ! Component: 1050 - total flux cleaned = -0.00108764 Jy ! Component: 1100 - total flux cleaned = -0.00110969 Jy ! Component: 1150 - total flux cleaned = -0.00126146 Jy ! Component: 1200 - total flux cleaned = -0.00132596 Jy ! Component: 1250 - total flux cleaned = -0.00149527 Jy ! Component: 1300 - total flux cleaned = -0.00151618 Jy ! Component: 1350 - total flux cleaned = -0.00159908 Jy ! Component: 1400 - total flux cleaned = -0.00168081 Jy ! Component: 1450 - total flux cleaned = -0.00172134 Jy ! Component: 1500 - total flux cleaned = -0.00184117 Jy ! Component: 1550 - total flux cleaned = -0.00184095 Jy ! Component: 1600 - total flux cleaned = -0.00186022 Jy ! Component: 1650 - total flux cleaned = -0.00189876 Jy ! Component: 1700 - total flux cleaned = -0.00191787 Jy ! Component: 1750 - total flux cleaned = -0.00195579 Jy ! Component: 1800 - total flux cleaned = -0.00188066 Jy ! Component: 1850 - total flux cleaned = -0.00201143 Jy ! Component: 1900 - total flux cleaned = -0.00204798 Jy ! Component: 1950 - total flux cleaned = -0.00201165 Jy ! Component: 2000 - total flux cleaned = -0.00204797 Jy ! Component: 2050 - total flux cleaned = -0.00199414 Jy ! Component: 2100 - total flux cleaned = -0.00201193 Jy ! Component: 2150 - total flux cleaned = -0.00202977 Jy ! Component: 2200 - total flux cleaned = -0.00202976 Jy ! Component: 2250 - total flux cleaned = -0.00201251 Jy ! Component: 2300 - total flux cleaned = -0.00199507 Jy ! Component: 2350 - total flux cleaned = -0.00202894 Jy ! Component: 2400 - total flux cleaned = -0.00206265 Jy ! Component: 2450 - total flux cleaned = -0.00204599 Jy ! Component: 2500 - total flux cleaned = -0.00206249 Jy ! Component: 2550 - total flux cleaned = -0.00206284 Jy ! Component: 2600 - total flux cleaned = -0.00207932 Jy ! Component: 2650 - total flux cleaned = -0.00212784 Jy ! Component: 2700 - total flux cleaned = -0.00214378 Jy ! Component: 2750 - total flux cleaned = -0.00212776 Jy ! Component: 2800 - total flux cleaned = -0.00217517 Jy ! Component: 2850 - total flux cleaned = -0.00214366 Jy ! Component: 2900 - total flux cleaned = -0.00219044 Jy ! Component: 2950 - total flux cleaned = -0.00223685 Jy ! Component: 3000 - total flux cleaned = -0.00223679 Jy ! Component: 3050 - total flux cleaned = -0.00223671 Jy ! Component: 3100 - total flux cleaned = -0.0022973 Jy ! Component: 3150 - total flux cleaned = -0.00231224 Jy ! Component: 3200 - total flux cleaned = -0.00234212 Jy ! Component: 3250 - total flux cleaned = -0.0023864 Jy ! Component: 3300 - total flux cleaned = -0.00240107 Jy ! Component: 3350 - total flux cleaned = -0.00243039 Jy ! Component: 3400 - total flux cleaned = -0.00247394 Jy ! Component: 3450 - total flux cleaned = -0.00250286 Jy ! Component: 3500 - total flux cleaned = -0.00256006 Jy ! Component: 3550 - total flux cleaned = -0.0026313 Jy ! Component: 3600 - total flux cleaned = -0.0026171 Jy ! Component: 3650 - total flux cleaned = -0.00265911 Jy ! Component: 3700 - total flux cleaned = -0.00267314 Jy ! Component: 3750 - total flux cleaned = -0.00268705 Jy ! Component: 3800 - total flux cleaned = -0.00272843 Jy ! Component: 3850 - total flux cleaned = -0.00281076 Jy ! Component: 3900 - total flux cleaned = -0.00285157 Jy ! Component: 3950 - total flux cleaned = -0.00285144 Jy ! Component: 4000 - total flux cleaned = -0.00293221 Jy ! Component: 4050 - total flux cleaned = -0.00298582 Jy ! Total flux subtracted in 4096 components = -0.00303898 Jy ! Clean residual min=-0.000913 max=0.000823 Jy/beam ! Clean residual mean=0.000007 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.243471 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 407 components and 0.243471 Jy ![Exited script file: muppet] wmap "J2308+0946_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.225 x 9.114 at 16.24 degrees (North through East) ! Clean map min=-0.0016387 max=0.23503 Jy/beam ! Writing clean map to FITS file: J2308+0946_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.235028 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33186 0.33186 0.66372 1.32744 2.65488 5.30976 10.6195 21.2391 42.4781 84.9562 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.225 x 9.114 at 16.24 degrees (North through East) ! Clean map min=-0.0016387 max=0.23503 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2308+0946_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:25:53 2019