! Started logfile: J2307+1450_S_2017_03_23_pus_uvs.log on Mon May 13 10:11:00 2019 obs J2307+1450_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2307+1450_S_2017_03_23_pus_uva.fits ! AN table 1: 138 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.792915 visibilities/baseline/integration-bin. ! Found source: J2307+1450 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 19696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2307+1450_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 467 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980763Jy sigma=0.008451 ! Fit after self-cal, rms=0.952346Jy sigma=0.008231 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=6.83 mas, bpa=-5.498 degrees ! Estimated noise=946.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039085 Jy ! Component: 100 - total flux cleaned = 0.0476237 Jy ! Total flux subtracted in 100 components = 0.0476237 Jy ! Clean residual min=-0.002782 max=0.002827 Jy/beam ! Clean residual mean=0.000000 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0476237 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0476237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081783Jy sigma=0.000647 ! Fit after self-cal, rms=0.081207Jy sigma=0.000643 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=7.642 mas, bpa=-5.102 degrees ! Estimated noise=632.642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295527 Jy ! Component: 100 - total flux cleaned = 0.0040526 Jy ! Component: 150 - total flux cleaned = 0.00434492 Jy ! Component: 200 - total flux cleaned = 0.00445064 Jy ! Total flux subtracted in 200 components = 0.00445064 Jy ! Clean residual min=-0.001852 max=0.001852 Jy/beam ! Clean residual mean=-0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0520743 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0520743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081072Jy sigma=0.000642 ! Fit after self-cal, rms=0.081077Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.09 KP 1.07 ! LA 0.96 MK 0.99 NL 0.90 OV 1.01 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.05 KP 0.94 ! LA 1.05 MK 1.05 NL 1.13 OV 1.09 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 0.97 KP 0.93 ! LA 0.86 MK 0.96 NL 1.22 OV 1.00 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.87 KP 1.00* ! LA 0.74 MK 1.00 NL 1.00* OV 1.07 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.081077Jy sigma=0.000642 ! Fit after self-cal, rms=0.078752Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=7.612 mas, bpa=-4.89 degrees ! Estimated noise=632.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227037 Jy ! Component: 100 - total flux cleaned = 0.00022547 Jy ! Component: 150 - total flux cleaned = 0.000283277 Jy ! Component: 200 - total flux cleaned = 0.000323112 Jy ! Total flux subtracted in 200 components = 0.000323112 Jy ! Clean residual min=-0.001906 max=0.001714 Jy/beam ! Clean residual mean=-0.000002 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0523974 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.0523974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078745Jy sigma=0.000640 ! Fit after self-cal, rms=0.078683Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078683Jy sigma=0.000640 ! Fit after self-cal, rms=0.078293Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=7.626 mas, bpa=-4.632 degrees ! Estimated noise=631.923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.71414e-05 Jy ! Component: 100 - total flux cleaned = 0.000135035 Jy ! Component: 150 - total flux cleaned = 0.000165899 Jy ! Component: 200 - total flux cleaned = 0.000179638 Jy ! Total flux subtracted in 200 components = 0.000179638 Jy ! Clean residual min=-0.001718 max=0.001809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0525771 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.0525771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078286Jy sigma=0.000639 ! Fit after self-cal, rms=0.078273Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-82.5, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132618 Jy ! Component: 100 - total flux cleaned = 0.00168215 Jy ! Component: 150 - total flux cleaned = 0.00178826 Jy ! Component: 200 - total flux cleaned = 0.00178927 Jy ! Total flux subtracted in 200 components = 0.00178927 Jy ! Clean residual min=-0.001650 max=0.001460 Jy/beam ! Clean residual mean=-0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0543663 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0543663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078240Jy sigma=0.000638 ! Fit after self-cal, rms=0.078216Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078216Jy sigma=0.000638 ! Fit after self-cal, rms=0.077981Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.627 mas, bpa=-4.539 degrees ! Estimated noise=628.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759043 Jy ! Component: 100 - total flux cleaned = 0.000813189 Jy ! Component: 150 - total flux cleaned = 0.00085854 Jy ! Component: 200 - total flux cleaned = 0.000899982 Jy ! Total flux subtracted in 200 components = 0.000899982 Jy ! Clean residual min=-0.001641 max=0.001466 Jy/beam ! Clean residual mean=-0.000000 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0552663 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.0552663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077963Jy sigma=0.000638 ! Fit after self-cal, rms=0.077962Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029878 Jy ! Component: 100 - total flux cleaned = 0.000276248 Jy ! Component: 150 - total flux cleaned = 0.000315085 Jy ! Component: 200 - total flux cleaned = 0.000333559 Jy ! Total flux subtracted in 200 components = 0.000333559 Jy ! Clean residual min=-0.001654 max=0.001413 Jy/beam ! Clean residual mean=-0.000000 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0555999 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.0555999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077950Jy sigma=0.000638 ! Fit after self-cal, rms=0.077947Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077947Jy sigma=0.000638 ! Fit after self-cal, rms=0.077792Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.428 mas, bmaj=10.63 mas, bpa=-1.088 degrees ! Estimated noise=776.795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433629 Jy ! Component: 100 - total flux cleaned = 0.000355148 Jy ! Component: 150 - total flux cleaned = 0.000322239 Jy ! Component: 200 - total flux cleaned = 0.000335668 Jy ! Total flux subtracted in 200 components = 0.000335668 Jy ! Clean residual min=-0.001927 max=0.001342 Jy/beam ! Clean residual mean=-0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0559356 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0559356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077788Jy sigma=0.000638 ! Fit after self-cal, rms=0.077790Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.49785e-05 Jy ! Component: 100 - total flux cleaned = 4.45849e-05 Jy ! Component: 150 - total flux cleaned = 5.61219e-05 Jy ! Component: 200 - total flux cleaned = 8.73649e-05 Jy ! Total flux subtracted in 200 components = 8.73649e-05 Jy ! Clean residual min=-0.001901 max=0.001353 Jy/beam ! Clean residual mean=-0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0560229 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.0560229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077790Jy sigma=0.000638 ! Fit after self-cal, rms=0.077788Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.626 mas, bpa=-4.454 degrees ! Estimated noise=627.015 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 7.626 at -4.454 degrees (North through East) ! Clean map min=-0.0015796 max=0.050892 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=6.799 mas, bpa=-4.805 degrees ! Estimated noise=938.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392289 Jy ! Component: 100 - total flux cleaned = 0.0478197 Jy ! Component: 150 - total flux cleaned = 0.0506954 Jy ! Component: 200 - total flux cleaned = 0.0526264 Jy ! Total flux subtracted in 200 components = 0.0526264 Jy ! Clean residual min=-0.002242 max=0.002276 Jy/beam ! Clean residual mean=-0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0526264 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0526264 Jy ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.626 mas, bpa=-4.454 degrees ! Estimated noise=627.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198977 Jy ! Component: 100 - total flux cleaned = 0.00296077 Jy ! Component: 150 - total flux cleaned = 0.00319949 Jy ! Component: 200 - total flux cleaned = 0.00345194 Jy ! Total flux subtracted in 200 components = 0.00345194 Jy ! Clean residual min=-0.001624 max=0.001465 Jy/beam ! Clean residual mean=-0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0560783 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.0560783 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.428 mas, bmaj=10.63 mas, bpa=-1.088 degrees ! Estimated noise=776.795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354421 Jy ! Component: 100 - total flux cleaned = 0.000529138 Jy ! Component: 150 - total flux cleaned = 0.000556171 Jy ! Component: 200 - total flux cleaned = 0.00063342 Jy ! Total flux subtracted in 200 components = 0.00063342 Jy ! Clean residual min=-0.001870 max=0.001297 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0567118 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134179 Jy ! Component: 100 - total flux cleaned = 0.000255081 Jy ! Component: 150 - total flux cleaned = 0.000347678 Jy ! Component: 200 - total flux cleaned = 0.000448834 Jy ! Total flux subtracted in 200 components = 0.000448834 Jy ! Clean residual min=-0.001834 max=0.001348 Jy/beam ! Clean residual mean=-0.000002 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0571606 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 52 components and 0.0571606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.626 mas, bpa=-4.454 degrees ! Estimated noise=627.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133903 Jy ! Component: 100 - total flux cleaned = 4.12778e-05 Jy ! Component: 150 - total flux cleaned = 0.000148138 Jy ! Component: 200 - total flux cleaned = 0.000197721 Jy ! Total flux subtracted in 200 components = 0.000197721 Jy ! Clean residual min=-0.001561 max=0.001404 Jy/beam ! Clean residual mean=-0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0573583 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.0573583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077782Jy sigma=0.000638 ! Fit after self-cal, rms=0.077779Jy sigma=0.000637 wmodel J2307+1450_S_2017_03_23_pus_map.mod ! Writing 68 model components to file: J2307+1450_S_2017_03_23_pus_map.mod wobs J2307+1450_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2307+1450_S_2017_03_23_pus_uvs.fits wwins J2307+1450_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J2307+1450_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000517622 Jy ! Component: 100 - total flux cleaned = -0.000692566 Jy ! Component: 150 - total flux cleaned = -0.000810144 Jy ! Component: 200 - total flux cleaned = -0.000924494 Jy ! Component: 250 - total flux cleaned = -0.000991524 Jy ! Component: 300 - total flux cleaned = -0.00105661 Jy ! Component: 350 - total flux cleaned = -0.00101431 Jy ! Component: 400 - total flux cleaned = -0.00105574 Jy ! Component: 450 - total flux cleaned = -0.0010353 Jy ! Component: 500 - total flux cleaned = -0.00103538 Jy ! Component: 550 - total flux cleaned = -0.00105481 Jy ! Component: 600 - total flux cleaned = -0.00109365 Jy ! Component: 650 - total flux cleaned = -0.00118854 Jy ! Component: 700 - total flux cleaned = -0.00120687 Jy ! Component: 750 - total flux cleaned = -0.0011704 Jy ! Component: 800 - total flux cleaned = -0.00122555 Jy ! Component: 850 - total flux cleaned = -0.0012798 Jy ! Component: 900 - total flux cleaned = -0.00131513 Jy ! Component: 950 - total flux cleaned = -0.00136787 Jy ! Component: 1000 - total flux cleaned = -0.00138539 Jy ! Component: 1050 - total flux cleaned = -0.0014541 Jy ! Component: 1100 - total flux cleaned = -0.00157252 Jy ! Component: 1150 - total flux cleaned = -0.0016393 Jy ! Component: 1200 - total flux cleaned = -0.00170538 Jy ! Component: 1250 - total flux cleaned = -0.00173833 Jy ! Component: 1300 - total flux cleaned = -0.00185147 Jy ! Component: 1350 - total flux cleaned = -0.00193145 Jy ! Component: 1400 - total flux cleaned = -0.00204187 Jy ! Component: 1450 - total flux cleaned = -0.00211976 Jy ! Component: 1500 - total flux cleaned = -0.00215085 Jy ! Component: 1550 - total flux cleaned = -0.00222744 Jy ! Component: 1600 - total flux cleaned = -0.00230301 Jy ! Component: 1650 - total flux cleaned = -0.00234812 Jy ! Component: 1700 - total flux cleaned = -0.00239269 Jy ! Component: 1750 - total flux cleaned = -0.00249577 Jy ! Component: 1800 - total flux cleaned = -0.00251026 Jy ! Component: 1850 - total flux cleaned = -0.00256803 Jy ! Component: 1900 - total flux cleaned = -0.00256819 Jy ! Component: 1950 - total flux cleaned = -0.00262502 Jy ! Component: 2000 - total flux cleaned = -0.00272325 Jy ! Component: 2050 - total flux cleaned = -0.00277898 Jy ! Component: 2100 - total flux cleaned = -0.00286164 Jy ! Component: 2150 - total flux cleaned = -0.00286164 Jy ! Component: 2200 - total flux cleaned = -0.0029295 Jy ! Component: 2250 - total flux cleaned = -0.00298335 Jy ! Component: 2300 - total flux cleaned = -0.00300998 Jy ! Component: 2350 - total flux cleaned = -0.00310243 Jy ! Component: 2400 - total flux cleaned = -0.00314188 Jy ! Component: 2450 - total flux cleaned = -0.00323309 Jy ! Component: 2500 - total flux cleaned = -0.00328476 Jy ! Component: 2550 - total flux cleaned = -0.00329744 Jy ! Component: 2600 - total flux cleaned = -0.00331009 Jy ! Component: 2650 - total flux cleaned = -0.00332276 Jy ! Component: 2700 - total flux cleaned = -0.00337319 Jy ! Component: 2750 - total flux cleaned = -0.0033981 Jy ! Component: 2800 - total flux cleaned = -0.00346014 Jy ! Component: 2850 - total flux cleaned = -0.00349695 Jy ! Component: 2900 - total flux cleaned = -0.00349689 Jy ! Component: 2950 - total flux cleaned = -0.00359394 Jy ! Component: 3000 - total flux cleaned = -0.003606 Jy ! Component: 3050 - total flux cleaned = -0.00365393 Jy ! Component: 3100 - total flux cleaned = -0.00368952 Jy ! Component: 3150 - total flux cleaned = -0.00372488 Jy ! Component: 3200 - total flux cleaned = -0.0037484 Jy ! Component: 3250 - total flux cleaned = -0.00381827 Jy ! Component: 3300 - total flux cleaned = -0.00380661 Jy ! Component: 3350 - total flux cleaned = -0.00385274 Jy ! Component: 3400 - total flux cleaned = -0.00381842 Jy ! Component: 3450 - total flux cleaned = -0.003864 Jy ! Component: 3500 - total flux cleaned = -0.0039318 Jy ! Component: 3550 - total flux cleaned = -0.0039542 Jy ! Component: 3600 - total flux cleaned = -0.0039765 Jy ! Component: 3650 - total flux cleaned = -0.00399865 Jy ! Component: 3700 - total flux cleaned = -0.0040426 Jy ! Component: 3750 - total flux cleaned = -0.0040206 Jy ! Component: 3800 - total flux cleaned = -0.00402067 Jy ! Component: 3850 - total flux cleaned = -0.00399896 Jy ! Component: 3900 - total flux cleaned = -0.00406366 Jy ! Component: 3950 - total flux cleaned = -0.00410639 Jy ! Component: 4000 - total flux cleaned = -0.00413832 Jy ! Component: 4050 - total flux cleaned = -0.00412763 Jy ! Total flux subtracted in 4096 components = -0.00412767 Jy ! Clean residual min=-0.000605 max=0.000558 Jy/beam ! Clean residual mean=-0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.0532306 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 375 components and 0.0532306 Jy ![Exited script file: muppet] wmap "J2307+1450_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 7.626 at -4.454 degrees (North through East) ! Clean map min=-0.0012232 max=0.050366 Jy/beam ! Writing clean map to FITS file: J2307+1450_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0503657 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195606 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16511 1.16511 2.33023 4.66046 9.32092 18.6418 37.2837 74.5673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 7.626 at -4.454 degrees (North through East) ! Clean map min=-0.0012232 max=0.050366 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2307+1450_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:11:06 2019