! Started logfile: J2306+0837_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:25:42 2019 obs J2306+0837_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2306+0837_S_2017_01_16_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.768928 visibilities/baseline/integration-bin. ! Found source: J2306+0837 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2306+0837_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 421 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976114Jy sigma=0.007532 ! Fit after self-cal, rms=0.948676Jy sigma=0.007357 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=8.569 mas, bpa=17.32 degrees ! Estimated noise=1055.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426406 Jy ! Component: 100 - total flux cleaned = 0.0528099 Jy ! Total flux subtracted in 100 components = 0.0528099 Jy ! Clean residual min=-0.003724 max=0.004179 Jy/beam ! Clean residual mean=-0.000024 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0528099 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0528099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101020Jy sigma=0.000669 ! Fit after self-cal, rms=0.100469Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.241 mas, bmaj=9.316 mas, bpa=17.15 degrees ! Estimated noise=801.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544212 Jy ! Component: 100 - total flux cleaned = 0.00776341 Jy ! Component: 150 - total flux cleaned = 0.00889373 Jy ! Component: 200 - total flux cleaned = 0.00907208 Jy ! Total flux subtracted in 200 components = 0.00907208 Jy ! Clean residual min=-0.002900 max=0.002687 Jy/beam ! Clean residual mean=-0.000024 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.061882 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.061882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100165Jy sigma=0.000664 ! Fit after self-cal, rms=0.100132Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 1.02 ! LA 1.04 MK 1.00* NL 0.93 OV 1.05 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.04 KP 1.06 ! LA 0.93 MK 1.00* NL 1.09 OV 1.12 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.02 KP 1.07 ! LA 0.98 MK 1.00* NL 1.04 OV 1.03 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.63 HN 0.97 KP 1.00* ! LA 0.60 MK 1.00* NL 1.00* OV 1.24 ! PT 1.12 SC 0.79 ! ! ! Fit before self-cal, rms=0.100132Jy sigma=0.000663 ! Fit after self-cal, rms=0.096948Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.269 mas, bmaj=9.321 mas, bpa=17.13 degrees ! Estimated noise=806.773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543101 Jy ! Component: 100 - total flux cleaned = 0.000432753 Jy ! Component: 150 - total flux cleaned = 0.000373636 Jy ! Component: 200 - total flux cleaned = 0.000322819 Jy ! Total flux subtracted in 200 components = 0.000322819 Jy ! Clean residual min=-0.002501 max=0.002851 Jy/beam ! Clean residual mean=-0.000011 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.0622048 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0622048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096914Jy sigma=0.000659 ! Fit after self-cal, rms=0.097355Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097355Jy sigma=0.000657 ! Fit after self-cal, rms=0.113968Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=9.367 mas, bpa=17.02 degrees ! Estimated noise=829.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015268 Jy ! Component: 100 - total flux cleaned = 0.00179314 Jy ! Component: 150 - total flux cleaned = 0.00197959 Jy ! Component: 200 - total flux cleaned = 0.00202769 Jy ! Total flux subtracted in 200 components = 0.00202769 Jy ! Clean residual min=-0.002777 max=0.002501 Jy/beam ! Clean residual mean=-0.000012 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0642325 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0642325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113922Jy sigma=0.000654 ! Fit after self-cal, rms=0.114143Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.69763e-05 Jy ! Component: 100 - total flux cleaned = -0.000118282 Jy ! Component: 150 - total flux cleaned = -0.000141302 Jy ! Component: 200 - total flux cleaned = -0.000122 Jy ! Total flux subtracted in 200 components = -0.000122 Jy ! Clean residual min=-0.002681 max=0.002274 Jy/beam ! Clean residual mean=-0.000008 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0641105 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.0641105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114126Jy sigma=0.000653 ! Fit after self-cal, rms=0.114118Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114118Jy sigma=0.000653 ! Fit after self-cal, rms=0.121002Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.281 mas, bmaj=9.331 mas, bpa=16.82 degrees ! Estimated noise=841.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001191 Jy ! Component: 100 - total flux cleaned = 0.00145201 Jy ! Component: 150 - total flux cleaned = 0.0016113 Jy ! Component: 200 - total flux cleaned = 0.00164691 Jy ! Total flux subtracted in 200 components = 0.00164691 Jy ! Clean residual min=-0.002819 max=0.002425 Jy/beam ! Clean residual mean=-0.000008 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0657574 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.0657574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120973Jy sigma=0.000652 ! Fit after self-cal, rms=0.121130Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.22542e-05 Jy ! Component: 100 - total flux cleaned = -7.37285e-05 Jy ! Component: 150 - total flux cleaned = -5.85534e-05 Jy ! Component: 200 - total flux cleaned = -5.85734e-05 Jy ! Total flux subtracted in 200 components = -5.85734e-05 Jy ! Clean residual min=-0.002652 max=0.002359 Jy/beam ! Clean residual mean=-0.000007 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0656988 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.0656988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121119Jy sigma=0.000652 ! Fit after self-cal, rms=0.121123Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121123Jy sigma=0.000652 ! Fit after self-cal, rms=0.125813Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=11.28 mas, bpa=9.266 degrees ! Estimated noise=1001.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151923 Jy ! Component: 100 - total flux cleaned = 0.00191441 Jy ! Component: 150 - total flux cleaned = 0.00197652 Jy ! Component: 200 - total flux cleaned = 0.00199342 Jy ! Total flux subtracted in 200 components = 0.00199342 Jy ! Clean residual min=-0.002812 max=0.002504 Jy/beam ! Clean residual mean=-0.000012 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0676922 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.0676922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125808Jy sigma=0.000652 ! Fit after self-cal, rms=0.125961Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145118 Jy ! Component: 100 - total flux cleaned = 0.000144279 Jy ! Component: 150 - total flux cleaned = 0.000136012 Jy ! Component: 200 - total flux cleaned = 0.000128941 Jy ! Total flux subtracted in 200 components = 0.000128941 Jy ! Clean residual min=-0.002860 max=0.002562 Jy/beam ! Clean residual mean=-0.000012 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0678212 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 74 components and 0.0678212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125961Jy sigma=0.000651 ! Fit after self-cal, rms=0.125963Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=9.298 mas, bpa=16.62 degrees ! Estimated noise=855.934 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.278 x 9.298 at 16.62 degrees (North through East) ! Clean map min=-0.002535 max=0.058909 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.681 mas, bmaj=8.53 mas, bpa=16.82 degrees ! Estimated noise=1126.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445589 Jy ! Component: 100 - total flux cleaned = 0.0576176 Jy ! Component: 150 - total flux cleaned = 0.0639389 Jy ! Component: 200 - total flux cleaned = 0.0659065 Jy ! Total flux subtracted in 200 components = 0.0659065 Jy ! Clean residual min=-0.003733 max=0.002932 Jy/beam ! Clean residual mean=-0.000009 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0659065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0659065 Jy ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=9.298 mas, bpa=16.62 degrees ! Estimated noise=855.934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128757 Jy ! Component: 100 - total flux cleaned = 0.00129097 Jy ! Component: 150 - total flux cleaned = 0.00124467 Jy ! Component: 200 - total flux cleaned = 0.00124483 Jy ! Total flux subtracted in 200 components = 0.00124483 Jy ! Clean residual min=-0.002713 max=0.002450 Jy/beam ! Clean residual mean=-0.000007 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0671514 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.0671514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=11.28 mas, bpa=9.266 degrees ! Estimated noise=1001.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813689 Jy ! Component: 100 - total flux cleaned = 0.00078232 Jy ! Component: 150 - total flux cleaned = 0.000724197 Jy ! Component: 200 - total flux cleaned = 0.000705221 Jy ! Total flux subtracted in 200 components = 0.000705221 Jy ! Clean residual min=-0.002867 max=0.002596 Jy/beam ! Clean residual mean=-0.000012 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0678566 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.54681e-09 Jy ! Component: 100 - total flux cleaned = 7.38524e-06 Jy ! Component: 150 - total flux cleaned = 2.12395e-05 Jy ! Component: 200 - total flux cleaned = 2.10391e-05 Jy ! Total flux subtracted in 200 components = 2.10391e-05 Jy ! Clean residual min=-0.002865 max=0.002586 Jy/beam ! Clean residual mean=-0.000011 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0678776 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0678776 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=9.298 mas, bpa=16.62 degrees ! Estimated noise=855.934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.95247e-05 Jy ! Component: 100 - total flux cleaned = -6.21474e-05 Jy ! Component: 150 - total flux cleaned = -0.000121014 Jy ! Component: 200 - total flux cleaned = -0.000147515 Jy ! Total flux subtracted in 200 components = -0.000147515 Jy ! Clean residual min=-0.002670 max=0.002313 Jy/beam ! Clean residual mean=-0.000007 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0677301 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0677301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125969Jy sigma=0.000651 ! Fit after self-cal, rms=0.125988Jy sigma=0.000651 wmodel J2306+0837_S_2017_01_16_pus_map.mod ! Writing 37 model components to file: J2306+0837_S_2017_01_16_pus_map.mod wobs J2306+0837_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2306+0837_S_2017_01_16_pus_uvs.fits wwins J2306+0837_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2306+0837_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000795164 Jy ! Component: 100 - total flux cleaned = -0.00124979 Jy ! Component: 150 - total flux cleaned = -0.00155812 Jy ! Component: 200 - total flux cleaned = -0.00185295 Jy ! Component: 250 - total flux cleaned = -0.00202973 Jy ! Component: 300 - total flux cleaned = -0.00223356 Jy ! Component: 350 - total flux cleaned = -0.00242954 Jy ! Component: 400 - total flux cleaned = -0.00252421 Jy ! Component: 450 - total flux cleaned = -0.00252467 Jy ! Component: 500 - total flux cleaned = -0.00255535 Jy ! Component: 550 - total flux cleaned = -0.00258436 Jy ! Component: 600 - total flux cleaned = -0.00252698 Jy ! Component: 650 - total flux cleaned = -0.00249908 Jy ! Component: 700 - total flux cleaned = -0.00255378 Jy ! Component: 750 - total flux cleaned = -0.00247346 Jy ! Component: 800 - total flux cleaned = -0.00247367 Jy ! Component: 850 - total flux cleaned = -0.00239627 Jy ! Component: 900 - total flux cleaned = -0.00226966 Jy ! Component: 950 - total flux cleaned = -0.00221967 Jy ! Component: 1000 - total flux cleaned = -0.00212083 Jy ! Component: 1050 - total flux cleaned = -0.00197521 Jy ! Component: 1100 - total flux cleaned = -0.00195109 Jy ! Component: 1150 - total flux cleaned = -0.00185679 Jy ! Component: 1200 - total flux cleaned = -0.00178662 Jy ! Component: 1250 - total flux cleaned = -0.00164967 Jy ! Component: 1300 - total flux cleaned = -0.00167313 Jy ! Component: 1350 - total flux cleaned = -0.00160614 Jy ! Component: 1400 - total flux cleaned = -0.00158404 Jy ! Component: 1450 - total flux cleaned = -0.00158418 Jy ! Component: 1500 - total flux cleaned = -0.00151903 Jy ! Component: 1550 - total flux cleaned = -0.00149806 Jy ! Component: 1600 - total flux cleaned = -0.00149792 Jy ! Component: 1650 - total flux cleaned = -0.00143527 Jy ! Component: 1700 - total flux cleaned = -0.00147634 Jy ! Component: 1750 - total flux cleaned = -0.0014354 Jy ! Component: 1800 - total flux cleaned = -0.00141487 Jy ! Component: 1850 - total flux cleaned = -0.00139459 Jy ! Component: 1900 - total flux cleaned = -0.00133492 Jy ! Component: 1950 - total flux cleaned = -0.00125639 Jy ! Component: 2000 - total flux cleaned = -0.00125662 Jy ! Component: 2050 - total flux cleaned = -0.00121809 Jy ! Component: 2100 - total flux cleaned = -0.00123743 Jy ! Component: 2150 - total flux cleaned = -0.00127553 Jy ! Component: 2200 - total flux cleaned = -0.00121889 Jy ! Component: 2250 - total flux cleaned = -0.00121901 Jy ! Component: 2300 - total flux cleaned = -0.00123775 Jy ! Component: 2350 - total flux cleaned = -0.00129294 Jy ! Component: 2400 - total flux cleaned = -0.00132912 Jy ! Component: 2450 - total flux cleaned = -0.00131101 Jy ! Component: 2500 - total flux cleaned = -0.00136476 Jy ! Component: 2550 - total flux cleaned = -0.00134693 Jy ! Component: 2600 - total flux cleaned = -0.0013471 Jy ! Component: 2650 - total flux cleaned = -0.00141694 Jy ! Component: 2700 - total flux cleaned = -0.00138238 Jy ! Component: 2750 - total flux cleaned = -0.00141692 Jy ! Component: 2800 - total flux cleaned = -0.00150254 Jy ! Component: 2850 - total flux cleaned = -0.00150237 Jy ! Component: 2900 - total flux cleaned = -0.00148551 Jy ! Component: 2950 - total flux cleaned = -0.00156928 Jy ! Component: 3000 - total flux cleaned = -0.00161919 Jy ! Component: 3050 - total flux cleaned = -0.0016522 Jy ! Component: 3100 - total flux cleaned = -0.00171749 Jy ! Component: 3150 - total flux cleaned = -0.00168497 Jy ! Component: 3200 - total flux cleaned = -0.00174965 Jy ! Component: 3250 - total flux cleaned = -0.00173363 Jy ! Component: 3300 - total flux cleaned = -0.00174961 Jy ! Component: 3350 - total flux cleaned = -0.00173383 Jy ! Component: 3400 - total flux cleaned = -0.00178115 Jy ! Component: 3450 - total flux cleaned = -0.00170269 Jy ! Component: 3500 - total flux cleaned = -0.00170258 Jy ! Component: 3550 - total flux cleaned = -0.00168722 Jy ! Component: 3600 - total flux cleaned = -0.00171804 Jy ! Component: 3650 - total flux cleaned = -0.0016721 Jy ! Component: 3700 - total flux cleaned = -0.00171766 Jy ! Component: 3750 - total flux cleaned = -0.00174784 Jy ! Component: 3800 - total flux cleaned = -0.00174791 Jy ! Component: 3850 - total flux cleaned = -0.00174796 Jy ! Component: 3900 - total flux cleaned = -0.00179259 Jy ! Component: 3950 - total flux cleaned = -0.00179259 Jy ! Component: 4000 - total flux cleaned = -0.00183673 Jy ! Component: 4050 - total flux cleaned = -0.00183678 Jy ! Total flux subtracted in 4096 components = -0.00183677 Jy ! Clean residual min=-0.000853 max=0.000796 Jy/beam ! Clean residual mean=-0.000007 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0658933 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 374 components and 0.0658933 Jy ![Exited script file: muppet] wmap "J2306+0837_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.278 x 9.298 at 16.62 degrees (North through East) ! Clean map min=-0.0020182 max=0.058957 Jy/beam ! Writing clean map to FITS file: J2306+0837_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0589574 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000279715 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42331 1.42331 2.84661 5.69323 11.3865 22.7729 45.5458 91.0917 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.278 x 9.298 at 16.62 degrees (North through East) ! Clean map min=-0.0020182 max=0.058957 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2306+0837_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:25:48 2019