! Started logfile: J2302-3718_S_2017_09_26_pus_uvs.log on Sat May 11 13:08:24 2019 obs J2302-3718_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2302-3718_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.377119 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2302-3718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 16020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2302-3718_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 985 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2058 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.741931Jy sigma=0.004618 ! Fit after self-cal, rms=0.719462Jy sigma=0.004467 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.558 mas, bmaj=24.69 mas, bpa=-12.89 degrees ! Estimated noise=2425.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202751 Jy ! Component: 100 - total flux cleaned = 0.312806 Jy ! Total flux subtracted in 100 components = 0.312806 Jy ! Clean residual min=-0.038960 max=0.058227 Jy/beam ! Clean residual mean=-0.004725 rms=0.017742 Jy/beam ! Combined flux in latest and established models = 0.312806 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 80 components and 0.312806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253028Jy sigma=0.001458 ! Fit after self-cal, rms=0.251844Jy sigma=0.001449 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.205 mas, bmaj=31.23 mas, bpa=-8.664 degrees ! Estimated noise=1159.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126428 Jy ! Component: 100 - total flux cleaned = 0.186949 Jy ! Component: 150 - total flux cleaned = 0.206794 Jy ! Component: 200 - total flux cleaned = 0.201672 Jy ! Total flux subtracted in 200 components = 0.201672 Jy ! Clean residual min=-0.028332 max=0.028412 Jy/beam ! Clean residual mean=-0.004434 rms=0.014105 Jy/beam ! Combined flux in latest and established models = 0.514478 Jy ! Performing phase self-cal ! Adding 178 model components to the UV plane model. ! The established model now contains 258 components and 0.514478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154265Jy sigma=0.000888 ! Fit after self-cal, rms=0.153475Jy sigma=0.000882 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.85 HN 1.00* KP 1.18 ! LA 0.91 MK 1.02 NL 1.00* OV 1.00 ! PT 0.86 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.12 ! LA 0.88 MK 1.00* NL 1.00* OV 0.99 ! PT 0.85 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.10 ! LA 0.85 MK 1.00* NL 1.00* OV 0.92 ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 597 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.153475Jy sigma=0.000882 ! Fit after self-cal, rms=0.121579Jy sigma=0.000749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.315 mas, bmaj=32.85 mas, bpa=-8.822 degrees ! Estimated noise=1096.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704866 Jy ! Component: 100 - total flux cleaned = 0.00182052 Jy ! Component: 150 - total flux cleaned = -0.00523998 Jy ! Component: 200 - total flux cleaned = -0.0112427 Jy ! Total flux subtracted in 200 components = -0.0112427 Jy ! Clean residual min=-0.009166 max=0.009094 Jy/beam ! Clean residual mean=-0.000948 rms=0.004471 Jy/beam ! Combined flux in latest and established models = 0.503235 Jy ! Performing phase self-cal ! Adding 125 model components to the UV plane model. ! The established model now contains 383 components and 0.503235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111073Jy sigma=0.000672 ! Fit after self-cal, rms=0.111082Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111082Jy sigma=0.000670 ! Fit after self-cal, rms=0.110576Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.379 mas, bmaj=33.44 mas, bpa=-8.991 degrees ! Estimated noise=1110.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666376 Jy ! Component: 100 - total flux cleaned = 0.00886828 Jy ! Component: 150 - total flux cleaned = 0.00990887 Jy ! Component: 200 - total flux cleaned = 0.0107847 Jy ! Total flux subtracted in 200 components = 0.0107847 Jy ! Clean residual min=-0.003411 max=0.003425 Jy/beam ! Clean residual mean=-0.000140 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.51402 Jy selfcal ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 460 components and 0.51402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108892Jy sigma=0.000639 ! Fit after self-cal, rms=0.108864Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285212 Jy ! Component: 100 - total flux cleaned = 0.00370673 Jy ! Component: 150 - total flux cleaned = 0.00488313 Jy ! Component: 200 - total flux cleaned = 0.00633559 Jy ! Total flux subtracted in 200 components = 0.00633559 Jy ! Clean residual min=-0.002083 max=0.002086 Jy/beam ! Clean residual mean=-0.000045 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.520356 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 534 components and 0.520356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108388Jy sigma=0.000636 ! Fit after self-cal, rms=0.108378Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108378Jy sigma=0.000636 ! Fit after self-cal, rms=0.108114Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.363 mas, bmaj=33.39 mas, bpa=-9.008 degrees ! Estimated noise=1109.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557241 Jy ! Component: 100 - total flux cleaned = 0.00146283 Jy ! Component: 150 - total flux cleaned = 0.00176339 Jy ! Component: 200 - total flux cleaned = 0.00238641 Jy ! Total flux subtracted in 200 components = 0.00238641 Jy ! Clean residual min=-0.001401 max=0.001405 Jy/beam ! Clean residual mean=-0.000044 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.522742 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 588 components and 0.522742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107903Jy sigma=0.000635 ! Fit after self-cal, rms=0.107896Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.73091e-05 Jy ! Component: 100 - total flux cleaned = 0.00020684 Jy ! Component: 150 - total flux cleaned = 0.000133258 Jy ! Component: 200 - total flux cleaned = 6.75791e-05 Jy ! Total flux subtracted in 200 components = 6.75791e-05 Jy ! Clean residual min=-0.001014 max=0.001010 Jy/beam ! Clean residual mean=-0.000014 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.52281 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 632 components and 0.52281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107797Jy sigma=0.000634 ! Fit after self-cal, rms=0.107791Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107791Jy sigma=0.000634 ! Fit after self-cal, rms=0.107754Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.55 mas, bmaj=44.86 mas, bpa=3.417 degrees ! Estimated noise=1137.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188151 Jy ! Component: 100 - total flux cleaned = 0.000387616 Jy ! Component: 150 - total flux cleaned = 0.000388623 Jy ! Component: 200 - total flux cleaned = 0.000470638 Jy ! Total flux subtracted in 200 components = 0.000470638 Jy ! Clean residual min=-0.000658 max=0.000660 Jy/beam ! Clean residual mean=-0.000019 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.52328 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 687 components and 0.52328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107708Jy sigma=0.000634 ! Fit after self-cal, rms=0.107707Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024563 Jy ! Component: 100 - total flux cleaned = -0.000173571 Jy ! Component: 150 - total flux cleaned = -0.000174765 Jy ! Component: 200 - total flux cleaned = -7.74873e-05 Jy ! Total flux subtracted in 200 components = -7.74873e-05 Jy ! Clean residual min=-0.000527 max=0.000525 Jy/beam ! Clean residual mean=-0.000004 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.523203 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 728 components and 0.523203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107681Jy sigma=0.000634 ! Fit after self-cal, rms=0.107678Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.35 mas, bmaj=33.36 mas, bpa=-9.031 degrees ! Estimated noise=1109.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.35 x 33.36 at -9.031 degrees (North through East) ! Clean map min=-0.019174 max=0.2233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=26.79 mas, bpa=-12.83 degrees ! Estimated noise=2451.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202168 Jy ! Component: 100 - total flux cleaned = 0.310049 Jy ! Component: 150 - total flux cleaned = 0.382337 Jy ! Component: 200 - total flux cleaned = 0.433028 Jy ! Total flux subtracted in 200 components = 0.433028 Jy ! Clean residual min=-0.029440 max=0.029970 Jy/beam ! Clean residual mean=-0.002597 rms=0.010716 Jy/beam ! Combined flux in latest and established models = 0.433028 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 126 model components to the UV plane model. ! The established model now contains 126 components and 0.433028 Jy ! Inverting map and beam ! Estimated beam: bmin=8.35 mas, bmaj=33.36 mas, bpa=-9.031 degrees ! Estimated noise=1109.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239553 Jy ! Component: 100 - total flux cleaned = 0.0208887 Jy ! Component: 150 - total flux cleaned = 0.0133358 Jy ! Component: 200 - total flux cleaned = 0.0122418 Jy ! Total flux subtracted in 200 components = 0.0122418 Jy ! Clean residual min=-0.015551 max=0.015492 Jy/beam ! Clean residual mean=-0.001823 rms=0.007569 Jy/beam ! Combined flux in latest and established models = 0.445269 Jy ! Adding 152 model components to the UV plane model. ! The established model now contains 271 components and 0.445269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.55 mas, bmaj=44.86 mas, bpa=3.417 degrees ! Estimated noise=1137.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00482001 Jy ! Component: 100 - total flux cleaned = -0.00232409 Jy ! Component: 150 - total flux cleaned = 0.000927789 Jy ! Component: 200 - total flux cleaned = 0.00309055 Jy ! Total flux subtracted in 200 components = 0.00309055 Jy ! Clean residual min=-0.008303 max=0.008304 Jy/beam ! Clean residual mean=-0.001113 rms=0.004316 Jy/beam ! Combined flux in latest and established models = 0.44836 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000926532 Jy ! Component: 100 - total flux cleaned = -0.00048602 Jy ! Component: 150 - total flux cleaned = -0.00189939 Jy ! Component: 200 - total flux cleaned = -0.00675163 Jy ! Total flux subtracted in 200 components = -0.00675163 Jy ! Clean residual min=-0.004756 max=0.004758 Jy/beam ! Clean residual mean=-0.000685 rms=0.002528 Jy/beam ! Combined flux in latest and established models = 0.441608 Jy ! Adding 268 model components to the UV plane model. ! The established model now contains 530 components and 0.441608 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.35 mas, bmaj=33.36 mas, bpa=-9.031 degrees ! Estimated noise=1109.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465621 Jy ! Component: 100 - total flux cleaned = 0.000946338 Jy ! Component: 150 - total flux cleaned = 0.00249052 Jy ! Component: 200 - total flux cleaned = 0.00177628 Jy ! Total flux subtracted in 200 components = 0.00177628 Jy ! Clean residual min=-0.002726 max=0.002745 Jy/beam ! Clean residual mean=-0.000327 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.443385 Jy selfcal ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 607 components and 0.443385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108188Jy sigma=0.000637 ! Fit after self-cal, rms=0.108105Jy sigma=0.000637 wmodel J2302-3718_S_2017_09_26_pus_map.mod ! Writing 607 model components to file: J2302-3718_S_2017_09_26_pus_map.mod wobs J2302-3718_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2302-3718_S_2017_09_26_pus_uvs.fits wwins J2302-3718_S_2017_09_26_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2302-3718_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.35 x 33.36 at -9.031 degrees (North through East) ! Clean map min=-0.023424 max=0.20587 Jy/beam ! Writing clean map to FITS file: J2302-3718_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.205873 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.001323 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.9279 1.9279 3.85579 7.71158 15.4232 30.8463 61.6927 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.35 x 33.36 at -9.031 degrees (North through East) ! Clean map min=-0.023424 max=0.20587 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2302-3718_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:08:30 2019