! Started logfile: J2302-3718_S_2017_04_28_pus_uvs.log on Thu May 2 16:35:07 2019 obs J2302-3718_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2302-3718_S_2017_04_28_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.762253 visibilities/baseline/integration-bin. ! Found source: J2302-3718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 20032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2302-3718_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 750 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925048Jy sigma=0.019214 ! Fit after self-cal, rms=0.883994Jy sigma=0.019141 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=8.642 mas, bpa=-11.67 degrees ! Estimated noise=1722.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0796312 Jy ! Component: 100 - total flux cleaned = 0.120879 Jy ! Total flux subtracted in 100 components = 0.120879 Jy ! Clean residual min=-0.019585 max=0.031174 Jy/beam ! Clean residual mean=-0.000029 rms=0.006711 Jy/beam ! Combined flux in latest and established models = 0.120879 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.120879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245355Jy sigma=0.002202 ! Fit after self-cal, rms=0.244915Jy sigma=0.002201 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=10.52 mas, bpa=-10.8 degrees ! Estimated noise=864.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416381 Jy ! Component: 100 - total flux cleaned = 0.0624047 Jy ! Component: 150 - total flux cleaned = 0.0728702 Jy ! Component: 200 - total flux cleaned = 0.0781516 Jy ! Total flux subtracted in 200 components = 0.0781516 Jy ! Clean residual min=-0.029673 max=0.038349 Jy/beam ! Clean residual mean=-0.000041 rms=0.011357 Jy/beam ! Combined flux in latest and established models = 0.199031 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.199031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229392Jy sigma=0.003234 ! Fit after self-cal, rms=0.228814Jy sigma=0.003233 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.67 FD 0.98 HN 1.09 KP 0.75 ! LA 0.58 MK 1.28 NL 2.70 OV 2.55 ! PT 0.55 SC 1.35 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.90 HN 0.95 KP 0.74 ! LA 0.53 MK 1.09 NL 3.56 OV 2.06 ! PT 0.54 SC 1.45 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 0.96 HN 1.15 KP 0.80 ! LA 0.53 MK 1.07 NL 3.09 OV 1.93 ! PT 0.53 SC 1.67 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.92 FD 0.83 HN 1.88 KP 1.00* ! LA 25.97 MK 0.74 NL 1.00* OV 1.00* ! PT 0.76 SC 1.00* ! ! ! Fit before self-cal, rms=0.228814Jy sigma=0.003233 ! Fit after self-cal, rms=2.501446Jy sigma=0.000855 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=11.49 mas, bpa=-10.46 degrees ! Estimated noise=1035.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125361 Jy ! Component: 100 - total flux cleaned = 0.0179339 Jy ! Component: 150 - total flux cleaned = 0.0184904 Jy ! Component: 200 - total flux cleaned = 0.0189707 Jy ! Total flux subtracted in 200 components = 0.0189707 Jy ! Clean residual min=-0.020623 max=0.026961 Jy/beam ! Clean residual mean=0.000296 rms=0.007499 Jy/beam ! Combined flux in latest and established models = 0.218001 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.218001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.499877Jy sigma=0.000861 ! Fit after self-cal, rms=2.502215Jy sigma=0.000849 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.502215Jy sigma=0.000849 ! Fit after self-cal, rms=2.529684Jy sigma=0.000824 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=11.35 mas, bpa=-9.727 degrees ! Estimated noise=1087.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0096599 Jy ! Component: 100 - total flux cleaned = 0.013685 Jy ! Component: 150 - total flux cleaned = 0.0141014 Jy ! Component: 200 - total flux cleaned = 0.0143737 Jy ! Total flux subtracted in 200 components = 0.0143737 Jy ! Clean residual min=-0.019733 max=0.023824 Jy/beam ! Clean residual mean=0.000264 rms=0.006917 Jy/beam ! Combined flux in latest and established models = 0.232375 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.232375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.528655Jy sigma=0.000827 ! Fit after self-cal, rms=2.529048Jy sigma=0.000826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81043e-05 Jy ! Component: 100 - total flux cleaned = 0.000199328 Jy ! Component: 150 - total flux cleaned = 0.000290562 Jy ! Component: 200 - total flux cleaned = 0.000611762 Jy ! Total flux subtracted in 200 components = 0.000611762 Jy ! Clean residual min=-0.019219 max=0.023247 Jy/beam ! Clean residual mean=0.000259 rms=0.006798 Jy/beam ! Combined flux in latest and established models = 0.232987 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.232987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.528978Jy sigma=0.000826 ! Fit after self-cal, rms=2.528991Jy sigma=0.000826 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.528991Jy sigma=0.000826 ! Fit after self-cal, rms=2.878494Jy sigma=0.000822 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=11.27 mas, bpa=-8.815 degrees ! Estimated noise=1138.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0097602 Jy ! Component: 100 - total flux cleaned = 0.0141032 Jy ! Component: 150 - total flux cleaned = 0.0147294 Jy ! Component: 200 - total flux cleaned = 0.0149973 Jy ! Total flux subtracted in 200 components = 0.0149973 Jy ! Clean residual min=-0.020204 max=0.024119 Jy/beam ! Clean residual mean=0.000256 rms=0.007083 Jy/beam ! Combined flux in latest and established models = 0.247984 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.247984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.877495Jy sigma=0.000826 ! Fit after self-cal, rms=2.877541Jy sigma=0.000825 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424138 Jy ! Component: 100 - total flux cleaned = 0.000631776 Jy ! Component: 150 - total flux cleaned = 0.000909444 Jy ! Component: 200 - total flux cleaned = 0.00115903 Jy ! Total flux subtracted in 200 components = 0.00115903 Jy ! Clean residual min=-0.020049 max=0.024247 Jy/beam ! Clean residual mean=0.000259 rms=0.007100 Jy/beam ! Combined flux in latest and established models = 0.249143 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.249143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.877444Jy sigma=0.000826 ! Fit after self-cal, rms=2.877436Jy sigma=0.000826 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.877436Jy sigma=0.000826 ! Fit after self-cal, rms=3.059585Jy sigma=0.000822 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=32.12 mas, bpa=2.715 degrees ! Estimated noise=1355.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162819 Jy ! Component: 100 - total flux cleaned = 0.0203128 Jy ! Component: 150 - total flux cleaned = 0.0206086 Jy ! Component: 200 - total flux cleaned = 0.0208952 Jy ! Total flux subtracted in 200 components = 0.0208952 Jy ! Clean residual min=-0.033644 max=0.039299 Jy/beam ! Clean residual mean=0.000468 rms=0.012193 Jy/beam ! Combined flux in latest and established models = 0.270038 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 74 components and 0.270038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.058224Jy sigma=0.000827 ! Fit after self-cal, rms=3.058117Jy sigma=0.000827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330975 Jy ! Component: 100 - total flux cleaned = 0.000482739 Jy ! Component: 150 - total flux cleaned = 0.000765151 Jy ! Component: 200 - total flux cleaned = 0.00103924 Jy ! Total flux subtracted in 200 components = 0.00103924 Jy ! Clean residual min=-0.033551 max=0.039641 Jy/beam ! Clean residual mean=0.000476 rms=0.012254 Jy/beam ! Combined flux in latest and established models = 0.271078 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 75 components and 0.271078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.058033Jy sigma=0.000828 ! Fit after self-cal, rms=3.058015Jy sigma=0.000827 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=11.16 mas, bpa=-7.815 degrees ! Estimated noise=1199.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 11.16 at -7.815 degrees (North through East) ! Clean map min=-0.021062 max=0.11626 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=9.028 mas, bpa=-8.978 degrees ! Estimated noise=2469.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111029 Jy ! Component: 100 - total flux cleaned = 0.172234 Jy ! Component: 150 - total flux cleaned = 0.207451 Jy ! Component: 200 - total flux cleaned = 0.228194 Jy ! Total flux subtracted in 200 components = 0.228194 Jy ! Clean residual min=-0.015477 max=0.023370 Jy/beam ! Clean residual mean=0.000205 rms=0.005098 Jy/beam ! Combined flux in latest and established models = 0.228193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.228193 Jy ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=11.16 mas, bpa=-7.815 degrees ! Estimated noise=1199.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219002 Jy ! Component: 100 - total flux cleaned = 0.0320526 Jy ! Component: 150 - total flux cleaned = 0.0341975 Jy ! Component: 200 - total flux cleaned = 0.0349679 Jy ! Total flux subtracted in 200 components = 0.0349679 Jy ! Clean residual min=-0.021528 max=0.026504 Jy/beam ! Clean residual mean=0.000265 rms=0.007488 Jy/beam ! Combined flux in latest and established models = 0.263161 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.263161 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=32.12 mas, bpa=2.715 degrees ! Estimated noise=1355.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723367 Jy ! Component: 100 - total flux cleaned = 0.00740079 Jy ! Component: 150 - total flux cleaned = 0.00771185 Jy ! Component: 200 - total flux cleaned = 0.00799405 Jy ! Total flux subtracted in 200 components = 0.00799405 Jy ! Clean residual min=-0.034047 max=0.039346 Jy/beam ! Clean residual mean=0.000478 rms=0.012279 Jy/beam ! Combined flux in latest and established models = 0.271155 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139246 Jy ! Component: 100 - total flux cleaned = 0.000395908 Jy ! Component: 150 - total flux cleaned = 0.000518337 Jy ! Component: 200 - total flux cleaned = 0.000754764 Jy ! Total flux subtracted in 200 components = 0.000754764 Jy ! Clean residual min=-0.033991 max=0.039316 Jy/beam ! Clean residual mean=0.000482 rms=0.012284 Jy/beam ! Combined flux in latest and established models = 0.27191 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.27191 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=11.16 mas, bpa=-7.815 degrees ! Estimated noise=1199.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00470996 Jy ! Component: 100 - total flux cleaned = -0.00471137 Jy ! Component: 150 - total flux cleaned = -0.0046968 Jy ! Component: 200 - total flux cleaned = -0.00444496 Jy ! Total flux subtracted in 200 components = -0.00444496 Jy ! Clean residual min=-0.021552 max=0.025208 Jy/beam ! Clean residual mean=0.000276 rms=0.007505 Jy/beam ! Combined flux in latest and established models = 0.267465 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.267465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.058248Jy sigma=0.000826 ! Fit after self-cal, rms=3.058140Jy sigma=0.000825 wmodel J2302-3718_S_2017_04_28_pus_map.mod ! Writing 71 model components to file: J2302-3718_S_2017_04_28_pus_map.mod wobs J2302-3718_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2302-3718_S_2017_04_28_pus_uvs.fits wwins J2302-3718_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J2302-3718_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114748 Jy ! Component: 100 - total flux cleaned = 0.018363 Jy ! Component: 150 - total flux cleaned = 0.0263126 Jy ! Component: 200 - total flux cleaned = 0.0338933 Jy ! Component: 250 - total flux cleaned = 0.0411427 Jy ! Component: 300 - total flux cleaned = 0.048106 Jy ! Component: 350 - total flux cleaned = 0.0548252 Jy ! Component: 400 - total flux cleaned = 0.0610259 Jy ! Component: 450 - total flux cleaned = 0.0670493 Jy ! Component: 500 - total flux cleaned = 0.0729076 Jy ! Component: 550 - total flux cleaned = 0.0783313 Jy ! Component: 600 - total flux cleaned = 0.0830672 Jy ! Component: 650 - total flux cleaned = 0.0876937 Jy ! Component: 700 - total flux cleaned = 0.0924792 Jy ! Component: 750 - total flux cleaned = 0.0966359 Jy ! Component: 800 - total flux cleaned = 0.10096 Jy ! Component: 850 - total flux cleaned = 0.10519 Jy ! Component: 900 - total flux cleaned = 0.109089 Jy ! Component: 950 - total flux cleaned = 0.113141 Jy ! Component: 1000 - total flux cleaned = 0.11641 Jy ! Component: 1050 - total flux cleaned = 0.119158 Jy ! Component: 1100 - total flux cleaned = 0.122307 Jy ! Component: 1150 - total flux cleaned = 0.125174 Jy ! Component: 1200 - total flux cleaned = 0.127994 Jy ! Component: 1250 - total flux cleaned = 0.130764 Jy ! Component: 1300 - total flux cleaned = 0.132861 Jy ! Component: 1350 - total flux cleaned = 0.134721 Jy ! Component: 1400 - total flux cleaned = 0.136555 Jy ! Component: 1450 - total flux cleaned = 0.138567 Jy ! Component: 1500 - total flux cleaned = 0.140151 Jy ! Component: 1550 - total flux cleaned = 0.14211 Jy ! Component: 1600 - total flux cleaned = 0.143654 Jy ! Component: 1650 - total flux cleaned = 0.14575 Jy ! Component: 1700 - total flux cleaned = 0.147068 Jy ! Component: 1750 - total flux cleaned = 0.149116 Jy ! Component: 1800 - total flux cleaned = 0.150769 Jy ! Component: 1850 - total flux cleaned = 0.152585 Jy ! Component: 1900 - total flux cleaned = 0.153665 Jy ! Component: 1950 - total flux cleaned = 0.155622 Jy ! Component: 2000 - total flux cleaned = 0.157031 Jy ! Component: 2050 - total flux cleaned = 0.158948 Jy ! Component: 2100 - total flux cleaned = 0.160498 Jy ! Component: 2150 - total flux cleaned = 0.162205 Jy ! Component: 2200 - total flux cleaned = 0.164739 Jy ! Component: 2250 - total flux cleaned = 0.166246 Jy ! Component: 2300 - total flux cleaned = 0.168238 Jy ! Component: 2350 - total flux cleaned = 0.170214 Jy ! Component: 2400 - total flux cleaned = 0.171357 Jy ! Component: 2450 - total flux cleaned = 0.173303 Jy ! Component: 2500 - total flux cleaned = 0.175553 Jy ! Component: 2550 - total flux cleaned = 0.177149 Jy ! Component: 2600 - total flux cleaned = 0.178573 Jy ! Component: 2650 - total flux cleaned = 0.180459 Jy ! Component: 2700 - total flux cleaned = 0.18171 Jy ! Component: 2750 - total flux cleaned = 0.183882 Jy ! Component: 2800 - total flux cleaned = 0.185115 Jy ! Component: 2850 - total flux cleaned = 0.186803 Jy ! Component: 2900 - total flux cleaned = 0.188175 Jy ! Component: 2950 - total flux cleaned = 0.189842 Jy ! Component: 3000 - total flux cleaned = 0.191199 Jy ! Component: 3050 - total flux cleaned = 0.192398 Jy ! Component: 3100 - total flux cleaned = 0.193592 Jy ! Component: 3150 - total flux cleaned = 0.194927 Jy ! Component: 3200 - total flux cleaned = 0.19596 Jy ! Component: 3250 - total flux cleaned = 0.197136 Jy ! Component: 3300 - total flux cleaned = 0.19816 Jy ! Component: 3350 - total flux cleaned = 0.199326 Jy ! Component: 3400 - total flux cleaned = 0.200486 Jy ! Component: 3450 - total flux cleaned = 0.201064 Jy ! Component: 3500 - total flux cleaned = 0.20236 Jy ! Component: 3550 - total flux cleaned = 0.203507 Jy ! Component: 3600 - total flux cleaned = 0.204222 Jy ! Component: 3650 - total flux cleaned = 0.205363 Jy ! Component: 3700 - total flux cleaned = 0.206498 Jy ! Component: 3750 - total flux cleaned = 0.207346 Jy ! Component: 3800 - total flux cleaned = 0.208474 Jy ! Component: 3850 - total flux cleaned = 0.209177 Jy ! Component: 3900 - total flux cleaned = 0.210157 Jy ! Component: 3950 - total flux cleaned = 0.211274 Jy ! Component: 4000 - total flux cleaned = 0.212388 Jy ! Component: 4050 - total flux cleaned = 0.213499 Jy ! Total flux subtracted in 4096 components = 0.214329 Jy ! Clean residual min=-0.007550 max=0.007108 Jy/beam ! Clean residual mean=0.000137 rms=0.003626 Jy/beam ! Combined flux in latest and established models = 0.481794 Jy keep ! Adding 838 model components to the UV plane model. ! The established model now contains 909 components and 0.481794 Jy ![Exited script file: muppet] wmap "J2302-3718_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 11.16 at -7.815 degrees (North through East) ! Clean map min=-0.018916 max=0.12541 Jy/beam ! Writing clean map to FITS file: J2302-3718_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125406 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00354146 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -8.47202 8.47202 16.944 33.8881 67.7761 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0106 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 11.16 at -7.815 degrees (North through East) ! Clean map min=-0.018916 max=0.12541 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2302-3718_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:35:13 2019