! Started logfile: J2259-0811_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:58:08 2019 obs J2259-0811_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J2259-0811_S_2017_05_31_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.956627 visibilities/baseline/integration-bin. ! Found source: J2259-0811 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 14292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2259-0811_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 351 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.902374Jy sigma=0.007713 ! Fit after self-cal, rms=0.895921Jy sigma=0.007662 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=6.919 mas, bpa=-5.231 degrees ! Estimated noise=1074.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797381 Jy ! Component: 100 - total flux cleaned = 0.0983043 Jy ! Total flux subtracted in 100 components = 0.0983043 Jy ! Clean residual min=-0.004204 max=0.007274 Jy/beam ! Clean residual mean=-0.000000 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.0983043 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0983043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086264Jy sigma=0.000684 ! Fit after self-cal, rms=0.086262Jy sigma=0.000684 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846658 Jy ! Component: 100 - total flux cleaned = 0.0135959 Jy ! Total flux subtracted in 100 components = 0.0135959 Jy ! Clean residual min=-0.003535 max=0.004355 Jy/beam ! Clean residual mean=0.000000 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.1119 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.1119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085024Jy sigma=0.000673 ! Fit after self-cal, rms=0.085041Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=8.129 mas, bpa=-4.015 degrees ! Estimated noise=793.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060097 Jy ! Component: 100 - total flux cleaned = 0.0095496 Jy ! Component: 150 - total flux cleaned = 0.0118114 Jy ! Component: 200 - total flux cleaned = 0.0131694 Jy ! Total flux subtracted in 200 components = 0.0131694 Jy ! Clean residual min=-0.002174 max=0.002318 Jy/beam ! Clean residual mean=0.000000 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.12507 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 74 components and 0.12507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084588Jy sigma=0.000669 ! Fit after self-cal, rms=0.084579Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 0.94 KP 0.99 ! LA 0.99 MK 1.07 NL 0.89 OV 1.03 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.03 HN 1.01 KP 0.95 ! LA 0.92 MK 0.95 NL 0.98 OV 1.04 ! PT 1.03 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.03 HN 1.03 KP 0.96 ! LA 1.03 MK 1.07 NL 0.97 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.98 KP 1.07 ! LA 1.01 MK 1.11 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.084579Jy sigma=0.000668 ! Fit after self-cal, rms=0.083878Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.174 mas, bpa=-3.877 degrees ! Estimated noise=792.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105159 Jy ! Component: 100 - total flux cleaned = 0.00115262 Jy ! Component: 150 - total flux cleaned = 0.00120952 Jy ! Component: 200 - total flux cleaned = 0.00121006 Jy ! Total flux subtracted in 200 components = 0.00121006 Jy ! Clean residual min=-0.001891 max=0.002000 Jy/beam ! Clean residual mean=0.000003 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.12628 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.12628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083852Jy sigma=0.000665 ! Fit after self-cal, rms=0.083867Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083867Jy sigma=0.000665 ! Fit after self-cal, rms=0.084465Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.211 mas, bpa=-3.877 degrees ! Estimated noise=795.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645989 Jy ! Component: 100 - total flux cleaned = 0.000678295 Jy ! Component: 150 - total flux cleaned = 0.000651648 Jy ! Component: 200 - total flux cleaned = 0.000627147 Jy ! Total flux subtracted in 200 components = 0.000627147 Jy ! Clean residual min=-0.001893 max=0.002035 Jy/beam ! Clean residual mean=0.000001 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.126907 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 98 components and 0.126907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084447Jy sigma=0.000663 ! Fit after self-cal, rms=0.084462Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.61129e-05 Jy ! Component: 100 - total flux cleaned = 3.44851e-05 Jy ! Component: 150 - total flux cleaned = 5.55295e-05 Jy ! Component: 200 - total flux cleaned = 7.53417e-05 Jy ! Total flux subtracted in 200 components = 7.53417e-05 Jy ! Clean residual min=-0.001913 max=0.002024 Jy/beam ! Clean residual mean=0.000001 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.126982 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.126982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084452Jy sigma=0.000663 ! Fit after self-cal, rms=0.084450Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084450Jy sigma=0.000663 ! Fit after self-cal, rms=0.085756Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.215 mas, bpa=-3.84 degrees ! Estimated noise=794.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.00071e-05 Jy ! Component: 100 - total flux cleaned = 9.24564e-06 Jy ! Component: 150 - total flux cleaned = 9.27887e-06 Jy ! Component: 200 - total flux cleaned = 2.63019e-05 Jy ! Total flux subtracted in 200 components = 2.63019e-05 Jy ! Clean residual min=-0.001900 max=0.001855 Jy/beam ! Clean residual mean=0.000000 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.127008 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.127009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085749Jy sigma=0.000661 ! Fit after self-cal, rms=0.085753Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.4575e-05 Jy ! Component: 100 - total flux cleaned = 7.48825e-05 Jy ! Component: 150 - total flux cleaned = 8.97548e-05 Jy ! Component: 200 - total flux cleaned = 0.000104187 Jy ! Total flux subtracted in 200 components = 0.000104187 Jy ! Clean residual min=-0.001876 max=0.001815 Jy/beam ! Clean residual mean=0.000000 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.127113 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 115 components and 0.127113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085748Jy sigma=0.000661 ! Fit after self-cal, rms=0.085747Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085747Jy sigma=0.000661 ! Fit after self-cal, rms=0.085918Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.496 mas, bmaj=14.41 mas, bpa=-3.254 degrees ! Estimated noise=990.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033804 Jy ! Component: 100 - total flux cleaned = -0.000404821 Jy ! Component: 150 - total flux cleaned = -0.000432501 Jy ! Component: 200 - total flux cleaned = -0.000456134 Jy ! Total flux subtracted in 200 components = -0.000456134 Jy ! Clean residual min=-0.002195 max=0.001760 Jy/beam ! Clean residual mean=0.000001 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.126657 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 130 components and 0.126657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085918Jy sigma=0.000661 ! Fit after self-cal, rms=0.085919Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.97452e-05 Jy ! Component: 100 - total flux cleaned = -3.20017e-05 Jy ! Component: 150 - total flux cleaned = -3.88811e-05 Jy ! Component: 200 - total flux cleaned = -4.56907e-05 Jy ! Total flux subtracted in 200 components = -4.56907e-05 Jy ! Clean residual min=-0.002195 max=0.001746 Jy/beam ! Clean residual mean=0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.126611 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 0.126611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085919Jy sigma=0.000661 ! Fit after self-cal, rms=0.085918Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=8.225 mas, bpa=-3.859 degrees ! Estimated noise=794.114 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.226 x 8.225 at -3.859 degrees (North through East) ! Clean map min=-0.001793 max=0.10505 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=7.016 mas, bpa=-4.879 degrees ! Estimated noise=1092.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0808054 Jy ! Component: 100 - total flux cleaned = 0.0995952 Jy ! Component: 150 - total flux cleaned = 0.10741 Jy ! Component: 200 - total flux cleaned = 0.112412 Jy ! Total flux subtracted in 200 components = 0.112412 Jy ! Clean residual min=-0.002851 max=0.003458 Jy/beam ! Clean residual mean=-0.000000 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.112412 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.112412 Jy ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=8.225 mas, bpa=-3.859 degrees ! Estimated noise=794.114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519515 Jy ! Component: 100 - total flux cleaned = 0.00832149 Jy ! Component: 150 - total flux cleaned = 0.0104489 Jy ! Component: 200 - total flux cleaned = 0.0119381 Jy ! Total flux subtracted in 200 components = 0.0119381 Jy ! Clean residual min=-0.001877 max=0.001919 Jy/beam ! Clean residual mean=-0.000000 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.12435 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 68 components and 0.12435 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.496 mas, bmaj=14.41 mas, bpa=-3.254 degrees ! Estimated noise=990.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114177 Jy ! Component: 100 - total flux cleaned = 0.0013973 Jy ! Component: 150 - total flux cleaned = 0.00158734 Jy ! Component: 200 - total flux cleaned = 0.0017174 Jy ! Total flux subtracted in 200 components = 0.0017174 Jy ! Clean residual min=-0.002217 max=0.001840 Jy/beam ! Clean residual mean=0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.126067 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104949 Jy ! Component: 100 - total flux cleaned = 0.00014323 Jy ! Component: 150 - total flux cleaned = 0.000166715 Jy ! Component: 200 - total flux cleaned = 0.000198845 Jy ! Total flux subtracted in 200 components = 0.000198845 Jy ! Clean residual min=-0.002211 max=0.001819 Jy/beam ! Clean residual mean=0.000001 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.126266 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 100 components and 0.126266 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=8.225 mas, bpa=-3.859 degrees ! Estimated noise=794.114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327216 Jy ! Component: 100 - total flux cleaned = 0.000486897 Jy ! Component: 150 - total flux cleaned = 0.000576909 Jy ! Component: 200 - total flux cleaned = 0.000556099 Jy ! Total flux subtracted in 200 components = 0.000556099 Jy ! Clean residual min=-0.001831 max=0.001821 Jy/beam ! Clean residual mean=0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.126822 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.126822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085922Jy sigma=0.000661 ! Fit after self-cal, rms=0.085917Jy sigma=0.000661 wmodel J2259-0811_S_2017_05_31_pus_map.mod ! Writing 114 model components to file: J2259-0811_S_2017_05_31_pus_map.mod wobs J2259-0811_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J2259-0811_S_2017_05_31_pus_uvs.fits wwins J2259-0811_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J2259-0811_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.83463e-05 Jy ! Component: 100 - total flux cleaned = 0.000225393 Jy ! Component: 150 - total flux cleaned = 0.000316167 Jy ! Component: 200 - total flux cleaned = 0.000344807 Jy ! Component: 250 - total flux cleaned = 0.000345165 Jy ! Component: 300 - total flux cleaned = 0.000428117 Jy ! Component: 350 - total flux cleaned = 0.000482014 Jy ! Component: 400 - total flux cleaned = 0.000508131 Jy ! Component: 450 - total flux cleaned = 0.000482132 Jy ! Component: 500 - total flux cleaned = 0.000507844 Jy ! Component: 550 - total flux cleaned = 0.000557913 Jy ! Component: 600 - total flux cleaned = 0.000508431 Jy ! Component: 650 - total flux cleaned = 0.000532859 Jy ! Component: 700 - total flux cleaned = 0.000580804 Jy ! Component: 750 - total flux cleaned = 0.000652238 Jy ! Component: 800 - total flux cleaned = 0.000722241 Jy ! Component: 850 - total flux cleaned = 0.000814963 Jy ! Component: 900 - total flux cleaned = 0.000905557 Jy ! Component: 950 - total flux cleaned = 0.000883204 Jy ! Component: 1000 - total flux cleaned = 0.000971812 Jy ! Component: 1050 - total flux cleaned = 0.000971964 Jy ! Component: 1100 - total flux cleaned = 0.000993846 Jy ! Component: 1150 - total flux cleaned = 0.00103669 Jy ! Component: 1200 - total flux cleaned = 0.00116364 Jy ! Component: 1250 - total flux cleaned = 0.00107954 Jy ! Component: 1300 - total flux cleaned = 0.00118385 Jy ! Component: 1350 - total flux cleaned = 0.00124562 Jy ! Component: 1400 - total flux cleaned = 0.00134736 Jy ! Component: 1450 - total flux cleaned = 0.00136742 Jy ! Component: 1500 - total flux cleaned = 0.00144758 Jy ! Component: 1550 - total flux cleaned = 0.00150697 Jy ! Component: 1600 - total flux cleaned = 0.00154598 Jy ! Component: 1650 - total flux cleaned = 0.00162353 Jy ! Component: 1700 - total flux cleaned = 0.00166236 Jy ! Component: 1750 - total flux cleaned = 0.00170061 Jy ! Component: 1800 - total flux cleaned = 0.00177613 Jy ! Component: 1850 - total flux cleaned = 0.00183241 Jy ! Component: 1900 - total flux cleaned = 0.00185099 Jy ! Component: 1950 - total flux cleaned = 0.0018882 Jy ! Component: 2000 - total flux cleaned = 0.0019614 Jy ! Component: 2050 - total flux cleaned = 0.00197946 Jy ! Component: 2100 - total flux cleaned = 0.0019617 Jy ! Component: 2150 - total flux cleaned = 0.00203309 Jy ! Component: 2200 - total flux cleaned = 0.00203326 Jy ! Component: 2250 - total flux cleaned = 0.00203332 Jy ! Component: 2300 - total flux cleaned = 0.00210318 Jy ! Component: 2350 - total flux cleaned = 0.00208611 Jy ! Component: 2400 - total flux cleaned = 0.00205204 Jy ! Component: 2450 - total flux cleaned = 0.00210313 Jy ! Component: 2500 - total flux cleaned = 0.00208649 Jy ! Component: 2550 - total flux cleaned = 0.00210347 Jy ! Component: 2600 - total flux cleaned = 0.00210357 Jy ! Component: 2650 - total flux cleaned = 0.00213646 Jy ! Component: 2700 - total flux cleaned = 0.00208722 Jy ! Component: 2750 - total flux cleaned = 0.0021034 Jy ! Component: 2800 - total flux cleaned = 0.00207096 Jy ! Component: 2850 - total flux cleaned = 0.00205473 Jy ! Component: 2900 - total flux cleaned = 0.00202319 Jy ! Component: 2950 - total flux cleaned = 0.00207099 Jy ! Component: 3000 - total flux cleaned = 0.00208681 Jy ! Component: 3050 - total flux cleaned = 0.00205553 Jy ! Component: 3100 - total flux cleaned = 0.00205563 Jy ! Component: 3150 - total flux cleaned = 0.0020711 Jy ! Component: 3200 - total flux cleaned = 0.00211728 Jy ! Component: 3250 - total flux cleaned = 0.00213252 Jy ! Component: 3300 - total flux cleaned = 0.00205691 Jy ! Component: 3350 - total flux cleaned = 0.00211703 Jy ! Component: 3400 - total flux cleaned = 0.00213184 Jy ! Component: 3450 - total flux cleaned = 0.00216157 Jy ! Component: 3500 - total flux cleaned = 0.00213217 Jy ! Component: 3550 - total flux cleaned = 0.00217618 Jy ! Component: 3600 - total flux cleaned = 0.00217614 Jy ! Component: 3650 - total flux cleaned = 0.00219063 Jy ! Component: 3700 - total flux cleaned = 0.00219061 Jy ! Component: 3750 - total flux cleaned = 0.0021332 Jy ! Component: 3800 - total flux cleaned = 0.0021332 Jy ! Component: 3850 - total flux cleaned = 0.00211919 Jy ! Component: 3900 - total flux cleaned = 0.00213332 Jy ! Component: 3950 - total flux cleaned = 0.00213326 Jy ! Component: 4000 - total flux cleaned = 0.00210558 Jy ! Component: 4050 - total flux cleaned = 0.00213323 Jy ! Total flux subtracted in 4096 components = 0.00206448 Jy ! Clean residual min=-0.000687 max=0.000741 Jy/beam ! Clean residual mean=0.000002 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.128887 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 408 components and 0.128887 Jy ![Exited script file: muppet] wmap "J2259-0811_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.226 x 8.225 at -3.859 degrees (North through East) ! Clean map min=-0.0014189 max=0.10523 Jy/beam ! Writing clean map to FITS file: J2259-0811_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10523 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255424 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.728191 0.728191 1.45638 2.91276 5.82553 11.6511 23.3021 46.6042 93.2085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.226 x 8.225 at -3.859 degrees (North through East) ! Clean map min=-0.0014189 max=0.10523 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2259-0811_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:58:12 2019