! Started logfile: J2257+0743_S_2017_02_19_pus_uvs.log on Sat May 4 19:01:21 2019 obs J2257+0743_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2257+0743_S_2017_02_19_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.211111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2257+0743 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2257+0743_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.517845Jy sigma=0.003568 ! Fit after self-cal, rms=0.497177Jy sigma=0.003441 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.299 mas, bmaj=23.27 mas, bpa=-86.12 degrees ! Estimated noise=4724.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.393483 Jy ! Component: 100 - total flux cleaned = 0.470707 Jy ! Total flux subtracted in 100 components = 0.470707 Jy ! Clean residual min=-0.030476 max=0.030928 Jy/beam ! Clean residual mean=-0.000153 rms=0.010897 Jy/beam ! Combined flux in latest and established models = 0.470707 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.470707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132102Jy sigma=0.000791 ! Fit after self-cal, rms=0.132076Jy sigma=0.000790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.872 mas, bmaj=23.68 mas, bpa=-82.47 degrees ! Estimated noise=4254.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162758 Jy ! Component: 100 - total flux cleaned = 0.0191521 Jy ! Component: 150 - total flux cleaned = 0.0134414 Jy ! Component: 200 - total flux cleaned = 0.0113204 Jy ! Total flux subtracted in 200 components = 0.0113204 Jy ! Clean residual min=-0.007963 max=0.007940 Jy/beam ! Clean residual mean=-0.000034 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.482028 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 85 components and 0.482028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117623Jy sigma=0.000711 ! Fit after self-cal, rms=0.117521Jy sigma=0.000710 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.00* KP 1.05 ! LA 1.06 MK 1.00* NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.00* KP 1.03 ! LA 1.03 MK 1.00* NL 1.00* OV 1.06 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.00* KP 0.89 ! LA 0.82 MK 1.00* NL 1.00* OV 0.93 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.00* KP 1.00* ! LA 0.95 MK 1.00* NL 1.00* OV 1.07 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.117521Jy sigma=0.000710 ! Fit after self-cal, rms=0.091927Jy sigma=0.000607 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.935 mas, bmaj=23.72 mas, bpa=-82.51 degrees ! Estimated noise=4216.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001101 Jy ! Component: 100 - total flux cleaned = -0.00220862 Jy ! Component: 150 - total flux cleaned = -0.00199412 Jy ! Component: 200 - total flux cleaned = -0.00205997 Jy ! Total flux subtracted in 200 components = -0.00205997 Jy ! Clean residual min=-0.001044 max=0.001043 Jy/beam ! Clean residual mean=-0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.479968 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 152 components and 0.479968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091609Jy sigma=0.000605 ! Fit after self-cal, rms=0.091598Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091598Jy sigma=0.000604 ! Fit after self-cal, rms=0.091622Jy sigma=0.000604 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.935 mas, bmaj=23.72 mas, bpa=-82.5 degrees ! Estimated noise=4219.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645736 Jy ! Component: 100 - total flux cleaned = -0.000870899 Jy ! Component: 150 - total flux cleaned = -0.000869442 Jy ! Component: 200 - total flux cleaned = -0.000774649 Jy ! Total flux subtracted in 200 components = -0.000774649 Jy ! Clean residual min=-0.000777 max=0.000773 Jy/beam ! Clean residual mean=-0.000000 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.479193 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 196 components and 0.479193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091563Jy sigma=0.000604 ! Fit after self-cal, rms=0.091559Jy sigma=0.000604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.1004e-05 Jy ! Component: 100 - total flux cleaned = -6.9714e-05 Jy ! Component: 150 - total flux cleaned = -6.95873e-05 Jy ! Component: 200 - total flux cleaned = 1.10088e-05 Jy ! Total flux subtracted in 200 components = 1.10088e-05 Jy ! Clean residual min=-0.000670 max=0.000674 Jy/beam ! Clean residual mean=0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.479204 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 226 components and 0.479204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091522Jy sigma=0.000604 ! Fit after self-cal, rms=0.091521Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091521Jy sigma=0.000604 ! Fit after self-cal, rms=0.091552Jy sigma=0.000604 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.935 mas, bmaj=23.72 mas, bpa=-82.5 degrees ! Estimated noise=4222.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312016 Jy ! Component: 100 - total flux cleaned = -0.000190114 Jy ! Component: 150 - total flux cleaned = 3.68447e-05 Jy ! Component: 200 - total flux cleaned = 0.000181689 Jy ! Total flux subtracted in 200 components = 0.000181689 Jy ! Clean residual min=-0.000590 max=0.000589 Jy/beam ! Clean residual mean=-0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.479386 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 253 components and 0.479386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091522Jy sigma=0.000603 ! Fit after self-cal, rms=0.091519Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35841e-05 Jy ! Component: 100 - total flux cleaned = 7.32201e-05 Jy ! Component: 150 - total flux cleaned = 0.000173958 Jy ! Component: 200 - total flux cleaned = 0.000333568 Jy ! Total flux subtracted in 200 components = 0.000333568 Jy ! Clean residual min=-0.000519 max=0.000522 Jy/beam ! Clean residual mean=0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.47972 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 282 components and 0.47972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091496Jy sigma=0.000603 ! Fit after self-cal, rms=0.091495Jy sigma=0.000603 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091495Jy sigma=0.000603 ! Fit after self-cal, rms=0.091512Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.9 mas, bmaj=23.27 mas, bpa=-83.34 degrees ! Estimated noise=4242.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.2038e-06 Jy ! Component: 100 - total flux cleaned = 9.15099e-05 Jy ! Component: 150 - total flux cleaned = 0.000259943 Jy ! Component: 200 - total flux cleaned = 0.000373028 Jy ! Total flux subtracted in 200 components = 0.000373028 Jy ! Clean residual min=-0.000469 max=0.000474 Jy/beam ! Clean residual mean=-0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.480093 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 306 components and 0.480093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091494Jy sigma=0.000603 ! Fit after self-cal, rms=0.091494Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150304 Jy ! Component: 100 - total flux cleaned = 0.000227861 Jy ! Component: 150 - total flux cleaned = 0.000354637 Jy ! Component: 200 - total flux cleaned = 0.000452525 Jy ! Total flux subtracted in 200 components = 0.000452525 Jy ! Clean residual min=-0.000401 max=0.000404 Jy/beam ! Clean residual mean=-0.000000 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.480545 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 339 components and 0.480545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091480Jy sigma=0.000603 ! Fit after self-cal, rms=0.091480Jy sigma=0.000603 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.935 mas, bmaj=23.71 mas, bpa=-82.49 degrees ! Estimated noise=4223.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.935 x 23.71 at -82.49 degrees (North through East) ! Clean map min=-0.01143 max=0.47486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.383 mas, bmaj=23.26 mas, bpa=-86.04 degrees ! Estimated noise=4730.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.394023 Jy ! Component: 100 - total flux cleaned = 0.47855 Jy ! Component: 150 - total flux cleaned = 0.483398 Jy ! Component: 200 - total flux cleaned = 0.485028 Jy ! Total flux subtracted in 200 components = 0.485028 Jy ! Clean residual min=-0.010080 max=0.010169 Jy/beam ! Clean residual mean=-0.000003 rms=0.004059 Jy/beam ! Combined flux in latest and established models = 0.485028 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.485028 Jy ! Inverting map and beam ! Estimated beam: bmin=9.935 mas, bmaj=23.71 mas, bpa=-82.49 degrees ! Estimated noise=4223.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931101 Jy ! Component: 100 - total flux cleaned = 0.0094958 Jy ! Component: 150 - total flux cleaned = 0.00872274 Jy ! Component: 200 - total flux cleaned = 0.00745477 Jy ! Total flux subtracted in 200 components = 0.00745477 Jy ! Clean residual min=-0.002487 max=0.002471 Jy/beam ! Clean residual mean=-0.000007 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.492483 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 125 components and 0.492483 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.9 mas, bmaj=23.27 mas, bpa=-83.34 degrees ! Estimated noise=4242.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174396 Jy ! Component: 100 - total flux cleaned = -0.0039504 Jy ! Component: 150 - total flux cleaned = -0.00483085 Jy ! Component: 200 - total flux cleaned = -0.00490829 Jy ! Total flux subtracted in 200 components = -0.00490829 Jy ! Clean residual min=-0.001325 max=0.001325 Jy/beam ! Clean residual mean=-0.000009 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.487574 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.69621e-06 Jy ! Component: 100 - total flux cleaned = -0.000153451 Jy ! Component: 150 - total flux cleaned = -0.000154254 Jy ! Component: 200 - total flux cleaned = -7.81385e-05 Jy ! Total flux subtracted in 200 components = -7.81385e-05 Jy ! Clean residual min=-0.001254 max=0.001255 Jy/beam ! Clean residual mean=-0.000010 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.487496 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 220 components and 0.487496 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.935 mas, bmaj=23.71 mas, bpa=-82.49 degrees ! Estimated noise=4223.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000437076 Jy ! Component: 100 - total flux cleaned = -0.000436336 Jy ! Component: 150 - total flux cleaned = -0.00043432 Jy ! Component: 200 - total flux cleaned = -0.000314946 Jy ! Total flux subtracted in 200 components = -0.000314946 Jy ! Clean residual min=-0.000989 max=0.000988 Jy/beam ! Clean residual mean=-0.000003 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.487181 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 280 components and 0.487181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091616Jy sigma=0.000604 ! Fit after self-cal, rms=0.091614Jy sigma=0.000604 wmodel J2257+0743_S_2017_02_19_pus_map.mod ! Writing 280 model components to file: J2257+0743_S_2017_02_19_pus_map.mod wobs J2257+0743_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2257+0743_S_2017_02_19_pus_uvs.fits wwins J2257+0743_S_2017_02_19_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2257+0743_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.935 x 23.71 at -82.49 degrees (North through East) ! Clean map min=-0.0075451 max=0.47963 Jy/beam ! Writing clean map to FITS file: J2257+0743_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.479632 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000355263 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.22221 0.22221 0.44442 0.888839 1.77768 3.55536 7.11072 14.2214 28.4429 56.8857 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.479 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.935 x 23.71 at -82.49 degrees (North through East) ! Clean map min=-0.0075451 max=0.47963 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2257+0743_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:01:24 2019