! Started logfile: J2256-2735_S_2017_08_12_pus_uvs.log on Fri May 10 15:10:20 2019 obs J2256-2735_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2256-2735_S_2017_08_12_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613801 visibilities/baseline/integration-bin. ! Found source: J2256-2735 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2256-2735_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 329 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 848 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901925Jy sigma=0.006107 ! Fit after self-cal, rms=0.886969Jy sigma=0.006015 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=7.373 mas, bpa=1.261 degrees ! Estimated noise=1855.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893886 Jy ! Component: 100 - total flux cleaned = 0.118261 Jy ! Total flux subtracted in 100 components = 0.118261 Jy ! Clean residual min=-0.009101 max=0.014055 Jy/beam ! Clean residual mean=-0.000029 rms=0.002679 Jy/beam ! Combined flux in latest and established models = 0.118261 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.118261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109597Jy sigma=0.000701 ! Fit after self-cal, rms=0.109463Jy sigma=0.000699 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=8.356 mas, bpa=2.135 degrees ! Estimated noise=1321.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190789 Jy ! Component: 100 - total flux cleaned = 0.0283671 Jy ! Component: 150 - total flux cleaned = 0.0330163 Jy ! Component: 200 - total flux cleaned = 0.0341598 Jy ! Total flux subtracted in 200 components = 0.0341598 Jy ! Clean residual min=-0.007548 max=0.010455 Jy/beam ! Clean residual mean=-0.000015 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.152421 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.152421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106631Jy sigma=0.000674 ! Fit after self-cal, rms=0.106574Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.12 KP 0.93 ! LA 1.02 MK 0.87 NL 0.86 OV 0.94 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.21 KP 0.90 ! LA 0.95 MK 0.99 NL 1.10 OV 1.00 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.52 FD 1.00* HN 1.24 KP 0.88 ! LA 0.95 MK 0.97 NL 1.01 OV 0.89 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106574Jy sigma=0.000673 ! Fit after self-cal, rms=0.115309Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=8.404 mas, bpa=2.687 degrees ! Estimated noise=1307.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727952 Jy ! Component: 100 - total flux cleaned = 0.00758122 Jy ! Component: 150 - total flux cleaned = 0.00724419 Jy ! Component: 200 - total flux cleaned = 0.00724402 Jy ! Total flux subtracted in 200 components = 0.00724402 Jy ! Clean residual min=-0.004252 max=0.005080 Jy/beam ! Clean residual mean=0.000022 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.159665 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.159665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114694Jy sigma=0.000656 ! Fit after self-cal, rms=0.115140Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115140Jy sigma=0.000655 ! Fit after self-cal, rms=0.115206Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=8.421 mas, bpa=3.024 degrees ! Estimated noise=1307.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302583 Jy ! Component: 100 - total flux cleaned = 0.00318682 Jy ! Component: 150 - total flux cleaned = 0.00311631 Jy ! Component: 200 - total flux cleaned = 0.00317368 Jy ! Total flux subtracted in 200 components = 0.00317368 Jy ! Clean residual min=-0.004078 max=0.004308 Jy/beam ! Clean residual mean=0.000024 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.162839 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.162839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115053Jy sigma=0.000653 ! Fit after self-cal, rms=0.115064Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (114, -116). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375494 Jy ! Component: 100 - total flux cleaned = 0.00523811 Jy ! Component: 150 - total flux cleaned = 0.00568718 Jy ! Component: 200 - total flux cleaned = 0.00580121 Jy ! Total flux subtracted in 200 components = 0.00580121 Jy ! Clean residual min=-0.003447 max=0.003538 Jy/beam ! Clean residual mean=0.000015 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.16864 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.16864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114889Jy sigma=0.000652 ! Fit after self-cal, rms=0.114869Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114869Jy sigma=0.000652 ! Fit after self-cal, rms=0.113736Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=8.426 mas, bpa=3.064 degrees ! Estimated noise=1303.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186341 Jy ! Component: 100 - total flux cleaned = 0.00249528 Jy ! Component: 150 - total flux cleaned = 0.00289006 Jy ! Component: 200 - total flux cleaned = 0.00302354 Jy ! Total flux subtracted in 200 components = 0.00302354 Jy ! Clean residual min=-0.003286 max=0.003134 Jy/beam ! Clean residual mean=0.000012 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.171664 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.171664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113675Jy sigma=0.000651 ! Fit after self-cal, rms=0.113668Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851719 Jy ! Component: 100 - total flux cleaned = 0.000984522 Jy ! Component: 150 - total flux cleaned = 0.00106489 Jy ! Component: 200 - total flux cleaned = 0.0011406 Jy ! Total flux subtracted in 200 components = 0.0011406 Jy ! Clean residual min=-0.003150 max=0.003070 Jy/beam ! Clean residual mean=0.000013 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.172804 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 113 components and 0.172804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113631Jy sigma=0.000651 ! Fit after self-cal, rms=0.113632Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113632Jy sigma=0.000651 ! Fit after self-cal, rms=0.113680Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.915 mas, bmaj=18.33 mas, bpa=1.674 degrees ! Estimated noise=1725.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180755 Jy ! Component: 100 - total flux cleaned = 0.0024408 Jy ! Component: 150 - total flux cleaned = 0.00253216 Jy ! Component: 200 - total flux cleaned = 0.00258594 Jy ! Total flux subtracted in 200 components = 0.00258594 Jy ! Clean residual min=-0.003899 max=0.003185 Jy/beam ! Clean residual mean=0.000032 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.17539 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 126 components and 0.17539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113666Jy sigma=0.000651 ! Fit after self-cal, rms=0.113669Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099761 Jy ! Component: 100 - total flux cleaned = 0.00110831 Jy ! Component: 150 - total flux cleaned = 0.00113263 Jy ! Component: 200 - total flux cleaned = 0.001155 Jy ! Total flux subtracted in 200 components = 0.001155 Jy ! Clean residual min=-0.003790 max=0.003293 Jy/beam ! Clean residual mean=0.000034 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.176545 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 136 components and 0.176545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113663Jy sigma=0.000651 ! Fit after self-cal, rms=0.113664Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.422 mas, bpa=3.016 degrees ! Estimated noise=1302.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 8.422 at 3.016 degrees (North through East) ! Clean map min=-0.0038472 max=0.11185 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=7.343 mas, bpa=2.005 degrees ! Estimated noise=1874.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.089861 Jy ! Component: 100 - total flux cleaned = 0.120686 Jy ! Component: 150 - total flux cleaned = 0.135668 Jy ! Component: 200 - total flux cleaned = 0.144984 Jy ! Total flux subtracted in 200 components = 0.144984 Jy ! Clean residual min=-0.006015 max=0.005883 Jy/beam ! Clean residual mean=-0.000009 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.144984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.144984 Jy ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.422 mas, bpa=3.016 degrees ! Estimated noise=1302.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00820062 Jy ! Component: 100 - total flux cleaned = 0.0141001 Jy ! Component: 150 - total flux cleaned = 0.0184927 Jy ! Component: 200 - total flux cleaned = 0.0218193 Jy ! Total flux subtracted in 200 components = 0.0218193 Jy ! Clean residual min=-0.004059 max=0.003745 Jy/beam ! Clean residual mean=0.000008 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.166803 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 49 components and 0.166803 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.915 mas, bmaj=18.33 mas, bpa=1.674 degrees ! Estimated noise=1725.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406003 Jy ! Component: 100 - total flux cleaned = 0.0066081 Jy ! Component: 150 - total flux cleaned = 0.00760237 Jy ! Component: 200 - total flux cleaned = 0.00822624 Jy ! Total flux subtracted in 200 components = 0.00822624 Jy ! Clean residual min=-0.004205 max=0.003285 Jy/beam ! Clean residual mean=0.000036 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.17503 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525079 Jy ! Component: 100 - total flux cleaned = 0.000892761 Jy ! Component: 150 - total flux cleaned = 0.00110058 Jy ! Component: 200 - total flux cleaned = 0.00125431 Jy ! Total flux subtracted in 200 components = 0.00125431 Jy ! Clean residual min=-0.004225 max=0.003343 Jy/beam ! Clean residual mean=0.000033 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.176284 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 80 components and 0.176284 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.422 mas, bpa=3.016 degrees ! Estimated noise=1302.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000790502 Jy ! Component: 100 - total flux cleaned = -0.0010529 Jy ! Component: 150 - total flux cleaned = -0.00110598 Jy ! Component: 200 - total flux cleaned = -0.00110513 Jy ! Total flux subtracted in 200 components = -0.00110513 Jy ! Clean residual min=-0.003335 max=0.003261 Jy/beam ! Clean residual mean=0.000014 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.175179 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.175179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113725Jy sigma=0.000651 ! Fit after self-cal, rms=0.113713Jy sigma=0.000651 wmodel J2256-2735_S_2017_08_12_pus_map.mod ! Writing 97 model components to file: J2256-2735_S_2017_08_12_pus_map.mod wobs J2256-2735_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2256-2735_S_2017_08_12_pus_uvs.fits wwins J2256-2735_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J2256-2735_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000409118 Jy ! Component: 100 - total flux cleaned = -0.0007789 Jy ! Component: 150 - total flux cleaned = -0.00117133 Jy ! Component: 200 - total flux cleaned = -0.00121688 Jy ! Component: 250 - total flux cleaned = -0.00117198 Jy ! Component: 300 - total flux cleaned = -0.00112905 Jy ! Component: 350 - total flux cleaned = -0.00100839 Jy ! Component: 400 - total flux cleaned = -0.00112545 Jy ! Component: 450 - total flux cleaned = -0.00127593 Jy ! Component: 500 - total flux cleaned = -0.00134903 Jy ! Component: 550 - total flux cleaned = -0.00156334 Jy ! Component: 600 - total flux cleaned = -0.00180642 Jy ! Component: 650 - total flux cleaned = -0.00200857 Jy ! Component: 700 - total flux cleaned = -0.00210757 Jy ! Component: 750 - total flux cleaned = -0.00220382 Jy ! Component: 800 - total flux cleaned = -0.00223464 Jy ! Component: 850 - total flux cleaned = -0.00232748 Jy ! Component: 900 - total flux cleaned = -0.00238824 Jy ! Component: 950 - total flux cleaned = -0.00250642 Jy ! Component: 1000 - total flux cleaned = -0.00253505 Jy ! Component: 1050 - total flux cleaned = -0.0026483 Jy ! Component: 1100 - total flux cleaned = -0.00262044 Jy ! Component: 1150 - total flux cleaned = -0.00273009 Jy ! Component: 1200 - total flux cleaned = -0.00275727 Jy ! Component: 1250 - total flux cleaned = -0.00283646 Jy ! Component: 1300 - total flux cleaned = -0.00294049 Jy ! Component: 1350 - total flux cleaned = -0.00306845 Jy ! Component: 1400 - total flux cleaned = -0.00326961 Jy ! Component: 1450 - total flux cleaned = -0.00344249 Jy ! Component: 1500 - total flux cleaned = -0.00358912 Jy ! Component: 1550 - total flux cleaned = -0.00382937 Jy ! Component: 1600 - total flux cleaned = -0.00394777 Jy ! Component: 1650 - total flux cleaned = -0.0041584 Jy ! Component: 1700 - total flux cleaned = -0.00432002 Jy ! Component: 1750 - total flux cleaned = -0.00445697 Jy ! Component: 1800 - total flux cleaned = -0.00461444 Jy ! Component: 1850 - total flux cleaned = -0.00472568 Jy ! Component: 1900 - total flux cleaned = -0.00487968 Jy ! Component: 1950 - total flux cleaned = -0.00503166 Jy ! Component: 2000 - total flux cleaned = -0.00516027 Jy ! Component: 2050 - total flux cleaned = -0.00528737 Jy ! Component: 2100 - total flux cleaned = -0.0053919 Jy ! Component: 2150 - total flux cleaned = -0.00549505 Jy ! Component: 2200 - total flux cleaned = -0.00561728 Jy ! Component: 2250 - total flux cleaned = -0.00569792 Jy ! Component: 2300 - total flux cleaned = -0.00581768 Jy ! Component: 2350 - total flux cleaned = -0.00587685 Jy ! Component: 2400 - total flux cleaned = -0.00595496 Jy ! Component: 2450 - total flux cleaned = -0.00607105 Jy ! Component: 2500 - total flux cleaned = -0.00612861 Jy ! Component: 2550 - total flux cleaned = -0.00628002 Jy ! Component: 2600 - total flux cleaned = -0.00637375 Jy ! Component: 2650 - total flux cleaned = -0.00646663 Jy ! Component: 2700 - total flux cleaned = -0.0065401 Jy ! Component: 2750 - total flux cleaned = -0.0066674 Jy ! Component: 2800 - total flux cleaned = -0.00673951 Jy ! Component: 2850 - total flux cleaned = -0.00686441 Jy ! Component: 2900 - total flux cleaned = -0.00698785 Jy ! Component: 2950 - total flux cleaned = -0.00707533 Jy ! Component: 3000 - total flux cleaned = -0.00716217 Jy ! Component: 3050 - total flux cleaned = -0.00733376 Jy ! Component: 3100 - total flux cleaned = -0.00743561 Jy ! Component: 3150 - total flux cleaned = -0.00746939 Jy ! Component: 3200 - total flux cleaned = -0.00758662 Jy ! Component: 3250 - total flux cleaned = -0.00768617 Jy ! Component: 3300 - total flux cleaned = -0.00780122 Jy ! Component: 3350 - total flux cleaned = -0.00783365 Jy ! Component: 3400 - total flux cleaned = -0.00786597 Jy ! Component: 3450 - total flux cleaned = -0.0079783 Jy ! Component: 3500 - total flux cleaned = -0.00804191 Jy ! Component: 3550 - total flux cleaned = -0.00818402 Jy ! Component: 3600 - total flux cleaned = -0.00816827 Jy ! Component: 3650 - total flux cleaned = -0.00827708 Jy ! Component: 3700 - total flux cleaned = -0.00830783 Jy ! Component: 3750 - total flux cleaned = -0.00836924 Jy ! Component: 3800 - total flux cleaned = -0.00841496 Jy ! Component: 3850 - total flux cleaned = -0.00844535 Jy ! Component: 3900 - total flux cleaned = -0.00849073 Jy ! Component: 3950 - total flux cleaned = -0.00852081 Jy ! Component: 4000 - total flux cleaned = -0.00855058 Jy ! Component: 4050 - total flux cleaned = -0.0086099 Jy ! Total flux subtracted in 4096 components = -0.00868378 Jy ! Clean residual min=-0.000784 max=0.000977 Jy/beam ! Clean residual mean=-0.000004 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.166495 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 402 components and 0.166495 Jy ![Exited script file: muppet] wmap "J2256-2735_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 8.422 at 3.016 degrees (North through East) ! Clean map min=-0.0020795 max=0.11165 Jy/beam ! Writing clean map to FITS file: J2256-2735_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111649 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271197 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.728707 0.728707 1.45741 2.91483 5.82966 11.6593 23.3186 46.6373 93.2745 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 8.422 at 3.016 degrees (North through East) ! Clean map min=-0.0020795 max=0.11165 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2256-2735_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:10:26 2019