! Started logfile: J2253+1942_S_2017_04_28_pus_uvs.log on Thu May 2 16:34:57 2019 obs J2253+1942_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2253+1942_S_2017_04_28_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.852778 visibilities/baseline/integration-bin. ! Found source: J2253+1942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2253+1942_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.776675Jy sigma=0.007537 ! Fit after self-cal, rms=0.774515Jy sigma=0.007520 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.304 mas, bpa=1.724 degrees ! Estimated noise=2750.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178744 Jy ! Component: 100 - total flux cleaned = 0.218946 Jy ! Total flux subtracted in 100 components = 0.218946 Jy ! Clean residual min=-0.011987 max=0.016251 Jy/beam ! Clean residual mean=0.000008 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 0.218946 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.218946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087473Jy sigma=0.000745 ! Fit after self-cal, rms=0.087484Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.908 mas, bpa=4.656 degrees ! Estimated noise=2329.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -126.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180096 Jy ! Component: 100 - total flux cleaned = 0.0276575 Jy ! Component: 150 - total flux cleaned = 0.0310762 Jy ! Component: 200 - total flux cleaned = 0.0317752 Jy ! Total flux subtracted in 200 components = 0.0317752 Jy ! Clean residual min=-0.008050 max=0.007262 Jy/beam ! Clean residual mean=-0.000001 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.250721 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.250721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083619Jy sigma=0.000702 ! Fit after self-cal, rms=0.083436Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.99 KP 1.00 ! LA 1.19 MK 0.99 NL 0.95 OV 0.95 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.03 KP 0.90 ! LA 1.03 MK 1.01 NL 1.13 OV 0.99 ! PT 1.00 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.07 KP 1.04 ! LA 1.05 MK 1.06 NL 0.95 OV 0.98 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.93 KP 1.00* ! LA 0.79 MK 1.06 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.083436Jy sigma=0.000701 ! Fit after self-cal, rms=0.080103Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=7.935 mas, bpa=4.626 degrees ! Estimated noise=2322.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00312297 Jy ! Component: 100 - total flux cleaned = -0.0027885 Jy ! Component: 150 - total flux cleaned = -0.00250164 Jy ! Component: 200 - total flux cleaned = -0.0022624 Jy ! Total flux subtracted in 200 components = -0.0022624 Jy ! Clean residual min=-0.006103 max=0.005424 Jy/beam ! Clean residual mean=0.000002 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.248458 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.248458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079738Jy sigma=0.000674 ! Fit after self-cal, rms=0.079749Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079749Jy sigma=0.000674 ! Fit after self-cal, rms=0.080185Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.933 mas, bpa=4.689 degrees ! Estimated noise=2327.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000658305 Jy ! Component: 100 - total flux cleaned = -0.000667211 Jy ! Component: 150 - total flux cleaned = -0.000541969 Jy ! Component: 200 - total flux cleaned = -0.000483158 Jy ! Total flux subtracted in 200 components = -0.000483158 Jy ! Clean residual min=-0.005845 max=0.005518 Jy/beam ! Clean residual mean=0.000001 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.247975 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.247975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080047Jy sigma=0.000672 ! Fit after self-cal, rms=0.080040Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137503 Jy ! Component: 100 - total flux cleaned = -8.66185e-05 Jy ! Component: 150 - total flux cleaned = -0.000136244 Jy ! Component: 200 - total flux cleaned = -0.000132754 Jy ! Total flux subtracted in 200 components = -0.000132754 Jy ! Clean residual min=-0.005784 max=0.005534 Jy/beam ! Clean residual mean=0.000000 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.247842 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.247842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079968Jy sigma=0.000672 ! Fit after self-cal, rms=0.079966Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079966Jy sigma=0.000672 ! Fit after self-cal, rms=0.080241Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.927 mas, bpa=4.764 degrees ! Estimated noise=2329.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139111 Jy ! Component: 100 - total flux cleaned = 0.000136865 Jy ! Component: 150 - total flux cleaned = 0.000180291 Jy ! Component: 200 - total flux cleaned = 0.00018103 Jy ! Total flux subtracted in 200 components = 0.00018103 Jy ! Clean residual min=-0.005614 max=0.005546 Jy/beam ! Clean residual mean=0.000001 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.248023 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.248023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080180Jy sigma=0.000671 ! Fit after self-cal, rms=0.080180Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78981e-06 Jy ! Component: 100 - total flux cleaned = 3.19639e-05 Jy ! Component: 150 - total flux cleaned = 0.000104833 Jy ! Component: 200 - total flux cleaned = 0.000103901 Jy ! Total flux subtracted in 200 components = 0.000103901 Jy ! Clean residual min=-0.005550 max=0.005534 Jy/beam ! Clean residual mean=0.000001 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.248127 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 0.248127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080143Jy sigma=0.000671 ! Fit after self-cal, rms=0.080142Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080142Jy sigma=0.000671 ! Fit after self-cal, rms=0.080288Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.28 mas, bmaj=10.54 mas, bpa=-1.183 degrees ! Estimated noise=2948.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041671 Jy ! Component: 100 - total flux cleaned = 0.00042007 Jy ! Component: 150 - total flux cleaned = 0.000337391 Jy ! Component: 200 - total flux cleaned = 0.000374438 Jy ! Total flux subtracted in 200 components = 0.000374438 Jy ! Clean residual min=-0.007553 max=0.005211 Jy/beam ! Clean residual mean=0.000003 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.248502 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.248502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080287Jy sigma=0.000671 ! Fit after self-cal, rms=0.080288Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3777e-05 Jy ! Component: 100 - total flux cleaned = 1.68544e-05 Jy ! Component: 150 - total flux cleaned = 4.85505e-05 Jy ! Component: 200 - total flux cleaned = 4.92694e-05 Jy ! Total flux subtracted in 200 components = 4.92694e-05 Jy ! Clean residual min=-0.007422 max=0.005234 Jy/beam ! Clean residual mean=0.000003 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.248551 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.248551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080296Jy sigma=0.000671 ! Fit after self-cal, rms=0.080295Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.921 mas, bpa=4.827 degrees ! Estimated noise=2330.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.227 x 7.921 at 4.827 degrees (North through East) ! Clean map min=-0.0058736 max=0.2259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=7.314 mas, bpa=1.911 degrees ! Estimated noise=2750.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178605 Jy ! Component: 100 - total flux cleaned = 0.218869 Jy ! Component: 150 - total flux cleaned = 0.234815 Jy ! Component: 200 - total flux cleaned = 0.240325 Jy ! Total flux subtracted in 200 components = 0.240325 Jy ! Clean residual min=-0.007562 max=0.007406 Jy/beam ! Clean residual mean=0.000004 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.240325 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.240325 Jy ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.921 mas, bpa=4.827 degrees ! Estimated noise=2330.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394155 Jy ! Component: 100 - total flux cleaned = 0.0046402 Jy ! Component: 150 - total flux cleaned = 0.00549991 Jy ! Component: 200 - total flux cleaned = 0.00598501 Jy ! Total flux subtracted in 200 components = 0.00598501 Jy ! Clean residual min=-0.005992 max=0.005841 Jy/beam ! Clean residual mean=0.000004 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.24631 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.24631 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.28 mas, bmaj=10.54 mas, bpa=-1.183 degrees ! Estimated noise=2948.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183112 Jy ! Component: 100 - total flux cleaned = 0.00191164 Jy ! Component: 150 - total flux cleaned = 0.00191332 Jy ! Component: 200 - total flux cleaned = 0.00191168 Jy ! Total flux subtracted in 200 components = 0.00191168 Jy ! Clean residual min=-0.007873 max=0.005008 Jy/beam ! Clean residual mean=0.000006 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.248222 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.19604e-06 Jy ! Component: 100 - total flux cleaned = -5.8799e-05 Jy ! Component: 150 - total flux cleaned = -5.72831e-05 Jy ! Component: 200 - total flux cleaned = -5.51702e-05 Jy ! Total flux subtracted in 200 components = -5.51702e-05 Jy ! Clean residual min=-0.007671 max=0.005059 Jy/beam ! Clean residual mean=0.000005 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.248167 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.248167 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.921 mas, bpa=4.827 degrees ! Estimated noise=2330.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320897 Jy ! Component: 100 - total flux cleaned = 0.000245031 Jy ! Component: 150 - total flux cleaned = 0.000244249 Jy ! Component: 200 - total flux cleaned = 0.000244454 Jy ! Total flux subtracted in 200 components = 0.000244454 Jy ! Clean residual min=-0.005947 max=0.005664 Jy/beam ! Clean residual mean=0.000001 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.248411 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.248411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080494Jy sigma=0.000672 ! Fit after self-cal, rms=0.080468Jy sigma=0.000672 wmodel J2253+1942_S_2017_04_28_pus_map.mod ! Writing 69 model components to file: J2253+1942_S_2017_04_28_pus_map.mod wobs J2253+1942_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2253+1942_S_2017_04_28_pus_uvs.fits wwins J2253+1942_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J2253+1942_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127998 Jy ! Component: 100 - total flux cleaned = -0.00276866 Jy ! Component: 150 - total flux cleaned = -0.00403735 Jy ! Component: 200 - total flux cleaned = -0.00474359 Jy ! Component: 250 - total flux cleaned = -0.00519087 Jy ! Component: 300 - total flux cleaned = -0.00561598 Jy ! Component: 350 - total flux cleaned = -0.00568702 Jy ! Component: 400 - total flux cleaned = -0.00568906 Jy ! Component: 450 - total flux cleaned = -0.00568961 Jy ! Component: 500 - total flux cleaned = -0.00575086 Jy ! Component: 550 - total flux cleaned = -0.00575004 Jy ! Component: 600 - total flux cleaned = -0.00557643 Jy ! Component: 650 - total flux cleaned = -0.0055194 Jy ! Component: 700 - total flux cleaned = -0.00529876 Jy ! Component: 750 - total flux cleaned = -0.00519044 Jy ! Component: 800 - total flux cleaned = -0.00503266 Jy ! Component: 850 - total flux cleaned = -0.00492952 Jy ! Component: 900 - total flux cleaned = -0.00477927 Jy ! Component: 950 - total flux cleaned = -0.00477914 Jy ! Component: 1000 - total flux cleaned = -0.0046346 Jy ! Component: 1050 - total flux cleaned = -0.00440032 Jy ! Component: 1100 - total flux cleaned = -0.0041247 Jy ! Component: 1150 - total flux cleaned = -0.00403503 Jy ! Component: 1200 - total flux cleaned = -0.00390137 Jy ! Component: 1250 - total flux cleaned = -0.00377 Jy ! Component: 1300 - total flux cleaned = -0.00355373 Jy ! Component: 1350 - total flux cleaned = -0.00329898 Jy ! Component: 1400 - total flux cleaned = -0.00296436 Jy ! Component: 1450 - total flux cleaned = -0.00279886 Jy ! Component: 1500 - total flux cleaned = -0.00251396 Jy ! Component: 1550 - total flux cleaned = -0.00227248 Jy ! Component: 1600 - total flux cleaned = -0.00207384 Jy ! Component: 1650 - total flux cleaned = -0.00179967 Jy ! Component: 1700 - total flux cleaned = -0.0016455 Jy ! Component: 1750 - total flux cleaned = -0.00149286 Jy ! Component: 1800 - total flux cleaned = -0.00141765 Jy ! Component: 1850 - total flux cleaned = -0.00123156 Jy ! Component: 1900 - total flux cleaned = -0.00112136 Jy ! Component: 1950 - total flux cleaned = -0.000903105 Jy ! Component: 2000 - total flux cleaned = -0.000794876 Jy ! Component: 2050 - total flux cleaned = -0.000580926 Jy ! Component: 2100 - total flux cleaned = -0.000439718 Jy ! Component: 2150 - total flux cleaned = -0.000335259 Jy ! Component: 2200 - total flux cleaned = -0.000335408 Jy ! Component: 2250 - total flux cleaned = -0.000129907 Jy ! Component: 2300 - total flux cleaned = -0.000130158 Jy ! Component: 2350 - total flux cleaned = -2.87888e-05 Jy ! Component: 2400 - total flux cleaned = 4.87801e-06 Jy ! Component: 2450 - total flux cleaned = 7.14255e-05 Jy ! Component: 2500 - total flux cleaned = 5.79833e-06 Jy ! Component: 2550 - total flux cleaned = 0.000169455 Jy ! Component: 2600 - total flux cleaned = 7.16052e-05 Jy ! Component: 2650 - total flux cleaned = 3.94772e-05 Jy ! Component: 2700 - total flux cleaned = 7.34948e-06 Jy ! Component: 2750 - total flux cleaned = -2.45683e-05 Jy ! Component: 2800 - total flux cleaned = -2.45374e-05 Jy ! Component: 2850 - total flux cleaned = -8.72984e-05 Jy ! Component: 2900 - total flux cleaned = -0.000181239 Jy ! Component: 2950 - total flux cleaned = -0.000181249 Jy ! Component: 3000 - total flux cleaned = -0.000212408 Jy ! Component: 3050 - total flux cleaned = -0.000304487 Jy ! Component: 3100 - total flux cleaned = -0.000273869 Jy ! Component: 3150 - total flux cleaned = -0.000456815 Jy ! Component: 3200 - total flux cleaned = -0.000487058 Jy ! Component: 3250 - total flux cleaned = -0.000608156 Jy ! Component: 3300 - total flux cleaned = -0.000728399 Jy ! Component: 3350 - total flux cleaned = -0.000788493 Jy ! Component: 3400 - total flux cleaned = -0.000937844 Jy ! Component: 3450 - total flux cleaned = -0.000997409 Jy ! Component: 3500 - total flux cleaned = -0.00111583 Jy ! Component: 3550 - total flux cleaned = -0.00123384 Jy ! Component: 3600 - total flux cleaned = -0.00132201 Jy ! Component: 3650 - total flux cleaned = -0.00140972 Jy ! Component: 3700 - total flux cleaned = -0.00152663 Jy ! Component: 3750 - total flux cleaned = -0.00161382 Jy ! Component: 3800 - total flux cleaned = -0.00170084 Jy ! Component: 3850 - total flux cleaned = -0.0017877 Jy ! Component: 3900 - total flux cleaned = -0.00181665 Jy ! Component: 3950 - total flux cleaned = -0.00193224 Jy ! Component: 4000 - total flux cleaned = -0.0020188 Jy ! Component: 4050 - total flux cleaned = -0.00210528 Jy ! Total flux subtracted in 4096 components = -0.00222036 Jy ! Clean residual min=-0.002159 max=0.001531 Jy/beam ! Clean residual mean=0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.246191 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 332 components and 0.246191 Jy ![Exited script file: muppet] wmap "J2253+1942_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.227 x 7.921 at 4.827 degrees (North through East) ! Clean map min=-0.0047995 max=0.22578 Jy/beam ! Writing clean map to FITS file: J2253+1942_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.225779 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00046045 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.611814 0.611814 1.22363 2.44726 4.89451 9.78903 19.5781 39.1561 78.3122 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.225 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.227 x 7.921 at 4.827 degrees (North through East) ! Clean map min=-0.0047995 max=0.22578 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2253+1942_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:35:02 2019