! Started logfile: J2253+1942_S_2017_02_24_pus_uvs.log on Sat May 4 11:37:40 2019 obs J2253+1942_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2253+1942_S_2017_02_24_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.841667 visibilities/baseline/integration-bin. ! Found source: J2253+1942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 7272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2253+1942_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.779267Jy sigma=0.039904 ! Fit after self-cal, rms=0.778744Jy sigma=0.039895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=6.751 mas, bpa=-9.714 degrees ! Estimated noise=847.063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119233 Jy ! Component: 100 - total flux cleaned = 0.130823 Jy ! Total flux subtracted in 100 components = 0.130823 Jy ! Clean residual min=-0.031860 max=0.036323 Jy/beam ! Clean residual mean=0.000160 rms=0.010024 Jy/beam ! Combined flux in latest and established models = 0.130823 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.130823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131192Jy sigma=0.005160 ! Fit after self-cal, rms=0.131100Jy sigma=0.005160 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=7.778 mas, bpa=-8.743 degrees ! Estimated noise=586.034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0113936 Jy ! Component: 100 - total flux cleaned = -0.0122198 Jy ! Component: 150 - total flux cleaned = -0.0129563 Jy ! Component: 200 - total flux cleaned = -0.0136239 Jy ! Total flux subtracted in 200 components = -0.0136239 Jy ! Clean residual min=-0.036383 max=0.043097 Jy/beam ! Clean residual mean=0.000187 rms=0.010942 Jy/beam ! Combined flux in latest and established models = 0.117199 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.117199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132941Jy sigma=0.004794 ! Fit after self-cal, rms=0.132892Jy sigma=0.004794 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 19.43 HN 0.97 KP 0.70 ! LA 0.67 MK 0.87 NL 0.83 OV 0.73 ! PT 0.68 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 10.92 HN 0.96 KP 0.65 ! LA 0.63 MK 0.87 NL 0.87 OV 0.76 ! PT 0.67 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 16.72 HN 0.95 KP 0.73 ! LA 0.69 MK 0.90 NL 0.92 OV 0.70 ! PT 0.67 SC 0.91 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.74 HN 0.96 KP 1.00* ! LA 0.66 MK 1.06 NL 1.00* OV 0.69 ! PT 0.71 SC 1.00* ! ! ! Fit before self-cal, rms=0.132892Jy sigma=0.004794 ! Fit after self-cal, rms=1.156243Jy sigma=0.001119 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=7.327 mas, bpa=-5.283 degrees ! Estimated noise=690.251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207515 Jy ! Component: 100 - total flux cleaned = 0.0304315 Jy ! Component: 150 - total flux cleaned = 0.0346126 Jy ! Component: 200 - total flux cleaned = 0.0356893 Jy ! Total flux subtracted in 200 components = 0.0356893 Jy ! Clean residual min=-0.018095 max=0.009874 Jy/beam ! Clean residual mean=0.000009 rms=0.003157 Jy/beam ! Combined flux in latest and established models = 0.152889 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.152889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.147484Jy sigma=0.001167 ! Fit after self-cal, rms=1.147710Jy sigma=0.001147 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.147710Jy sigma=0.001147 ! Fit after self-cal, rms=1.232847Jy sigma=0.000863 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=7.343 mas, bpa=-5.413 degrees ! Estimated noise=730.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103796 Jy ! Component: 100 - total flux cleaned = 0.015858 Jy ! Component: 150 - total flux cleaned = 0.0188225 Jy ! Component: 200 - total flux cleaned = 0.0189273 Jy ! Total flux subtracted in 200 components = 0.0189273 Jy ! Clean residual min=-0.009412 max=0.006663 Jy/beam ! Clean residual mean=0.000054 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.171816 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.171816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.229953Jy sigma=0.000872 ! Fit after self-cal, rms=1.229961Jy sigma=0.000871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.96328e-05 Jy ! Component: 100 - total flux cleaned = 9.76469e-05 Jy ! Component: 150 - total flux cleaned = 0.000173494 Jy ! Component: 200 - total flux cleaned = 0.000172848 Jy ! Total flux subtracted in 200 components = 0.000172848 Jy ! Clean residual min=-0.009456 max=0.006553 Jy/beam ! Clean residual mean=0.000054 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.171989 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.171989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.229631Jy sigma=0.000872 ! Fit after self-cal, rms=1.229630Jy sigma=0.000872 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.229630Jy sigma=0.000872 ! Fit after self-cal, rms=0.058675Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=7.373 mas, bpa=-5.582 degrees ! Estimated noise=729.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709692 Jy ! Component: 100 - total flux cleaned = 0.00105347 Jy ! Component: 150 - total flux cleaned = 0.00123326 Jy ! Component: 200 - total flux cleaned = 0.0013278 Jy ! Total flux subtracted in 200 components = 0.0013278 Jy ! Clean residual min=-0.002192 max=0.001827 Jy/beam ! Clean residual mean=-0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.173317 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.173317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058613Jy sigma=0.000654 ! Fit after self-cal, rms=0.058530Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.80405e-05 Jy ! Component: 100 - total flux cleaned = 0.000150639 Jy ! Component: 150 - total flux cleaned = 0.000228235 Jy ! Component: 200 - total flux cleaned = 0.000276574 Jy ! Total flux subtracted in 200 components = 0.000276574 Jy ! Clean residual min=-0.002198 max=0.001821 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.173593 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.173593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058503Jy sigma=0.000652 ! Fit after self-cal, rms=0.058503Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058503Jy sigma=0.000652 ! Fit after self-cal, rms=0.058538Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=10.68 mas, bpa=0.1146 degrees ! Estimated noise=843.917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741305 Jy ! Component: 100 - total flux cleaned = 0.00111092 Jy ! Component: 150 - total flux cleaned = 0.00129963 Jy ! Component: 200 - total flux cleaned = 0.00131582 Jy ! Total flux subtracted in 200 components = 0.00131582 Jy ! Clean residual min=-0.002100 max=0.001806 Jy/beam ! Clean residual mean=-0.000004 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.174909 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.174909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058523Jy sigma=0.000652 ! Fit after self-cal, rms=0.058521Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75083e-05 Jy ! Component: 100 - total flux cleaned = 3.22221e-05 Jy ! Component: 150 - total flux cleaned = 4.59413e-05 Jy ! Component: 200 - total flux cleaned = 5.87299e-05 Jy ! Total flux subtracted in 200 components = 5.87299e-05 Jy ! Clean residual min=-0.002099 max=0.001808 Jy/beam ! Clean residual mean=-0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.174968 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.174968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058518Jy sigma=0.000652 ! Fit after self-cal, rms=0.058517Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.374 mas, bpa=-5.472 degrees ! Estimated noise=730.968 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.374 at -5.472 degrees (North through East) ! Clean map min=-0.0021229 max=0.17055 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=6.291 mas, bpa=-6.894 degrees ! Estimated noise=931.132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131648 Jy ! Component: 100 - total flux cleaned = 0.160977 Jy ! Component: 150 - total flux cleaned = 0.171313 Jy ! Component: 200 - total flux cleaned = 0.175403 Jy ! Total flux subtracted in 200 components = 0.175403 Jy ! Clean residual min=-0.003353 max=0.002566 Jy/beam ! Clean residual mean=-0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.175403 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.175403 Jy ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.374 mas, bpa=-5.472 degrees ! Estimated noise=730.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053377 Jy ! Component: 100 - total flux cleaned = 0.000540597 Jy ! Component: 150 - total flux cleaned = 0.000413617 Jy ! Component: 200 - total flux cleaned = 0.000303918 Jy ! Total flux subtracted in 200 components = 0.000303918 Jy ! Clean residual min=-0.002211 max=0.001928 Jy/beam ! Clean residual mean=-0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.175707 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.175707 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=10.68 mas, bpa=0.1146 degrees ! Estimated noise=843.917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148626 Jy ! Component: 100 - total flux cleaned = -0.000248659 Jy ! Component: 150 - total flux cleaned = -0.000309417 Jy ! Component: 200 - total flux cleaned = -0.000327469 Jy ! Total flux subtracted in 200 components = -0.000327469 Jy ! Clean residual min=-0.002142 max=0.001794 Jy/beam ! Clean residual mean=-0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.175379 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.71888e-05 Jy ! Component: 100 - total flux cleaned = -3.36832e-05 Jy ! Component: 150 - total flux cleaned = -4.89069e-05 Jy ! Component: 200 - total flux cleaned = -6.29035e-05 Jy ! Total flux subtracted in 200 components = -6.29035e-05 Jy ! Clean residual min=-0.002137 max=0.001800 Jy/beam ! Clean residual mean=-0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.175316 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.175316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.374 mas, bpa=-5.472 degrees ! Estimated noise=730.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.58894e-05 Jy ! Component: 100 - total flux cleaned = 2.728e-06 Jy ! Component: 150 - total flux cleaned = -2.4779e-05 Jy ! Component: 200 - total flux cleaned = -7.7217e-05 Jy ! Total flux subtracted in 200 components = -7.7217e-05 Jy ! Clean residual min=-0.002219 max=0.001846 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.175239 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.175239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058482Jy sigma=0.000652 ! Fit after self-cal, rms=0.058472Jy sigma=0.000652 wmodel J2253+1942_S_2017_02_24_pus_map.mod ! Writing 53 model components to file: J2253+1942_S_2017_02_24_pus_map.mod wobs J2253+1942_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2253+1942_S_2017_02_24_pus_uvs.fits wwins J2253+1942_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J2253+1942_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000973674 Jy ! Component: 100 - total flux cleaned = -0.00149617 Jy ! Component: 150 - total flux cleaned = -0.00179494 Jy ! Component: 200 - total flux cleaned = -0.00198652 Jy ! Component: 250 - total flux cleaned = -0.00207931 Jy ! Component: 300 - total flux cleaned = -0.00223107 Jy ! Component: 350 - total flux cleaned = -0.00234982 Jy ! Component: 400 - total flux cleaned = -0.002408 Jy ! Component: 450 - total flux cleaned = -0.00240783 Jy ! Component: 500 - total flux cleaned = -0.00238013 Jy ! Component: 550 - total flux cleaned = -0.00246348 Jy ! Component: 600 - total flux cleaned = -0.00243614 Jy ! Component: 650 - total flux cleaned = -0.00248994 Jy ! Component: 700 - total flux cleaned = -0.00251634 Jy ! Component: 750 - total flux cleaned = -0.00248981 Jy ! Component: 800 - total flux cleaned = -0.00246392 Jy ! Component: 850 - total flux cleaned = -0.00241251 Jy ! Component: 900 - total flux cleaned = -0.002362 Jy ! Component: 950 - total flux cleaned = -0.00231142 Jy ! Component: 1000 - total flux cleaned = -0.0022614 Jy ! Component: 1050 - total flux cleaned = -0.00218744 Jy ! Component: 1100 - total flux cleaned = -0.00221203 Jy ! Component: 1150 - total flux cleaned = -0.00218755 Jy ! Component: 1200 - total flux cleaned = -0.00209161 Jy ! Component: 1250 - total flux cleaned = -0.00213926 Jy ! Component: 1300 - total flux cleaned = -0.00206834 Jy ! Component: 1350 - total flux cleaned = -0.00209167 Jy ! Component: 1400 - total flux cleaned = -0.0019759 Jy ! Component: 1450 - total flux cleaned = -0.00197605 Jy ! Component: 1500 - total flux cleaned = -0.00206752 Jy ! Component: 1550 - total flux cleaned = -0.00202242 Jy ! Component: 1600 - total flux cleaned = -0.00206742 Jy ! Component: 1650 - total flux cleaned = -0.00206749 Jy ! Component: 1700 - total flux cleaned = -0.00213395 Jy ! Component: 1750 - total flux cleaned = -0.00224355 Jy ! Component: 1800 - total flux cleaned = -0.00222181 Jy ! Component: 1850 - total flux cleaned = -0.00228657 Jy ! Component: 1900 - total flux cleaned = -0.00232958 Jy ! Component: 1950 - total flux cleaned = -0.0024149 Jy ! Component: 2000 - total flux cleaned = -0.00241483 Jy ! Component: 2050 - total flux cleaned = -0.00247807 Jy ! Component: 2100 - total flux cleaned = -0.00254056 Jy ! Component: 2150 - total flux cleaned = -0.00254081 Jy ! Component: 2200 - total flux cleaned = -0.00266419 Jy ! Component: 2250 - total flux cleaned = -0.0025619 Jy ! Component: 2300 - total flux cleaned = -0.00266325 Jy ! Component: 2350 - total flux cleaned = -0.00270363 Jy ! Component: 2400 - total flux cleaned = -0.00276375 Jy ! Component: 2450 - total flux cleaned = -0.00270392 Jy ! Component: 2500 - total flux cleaned = -0.00280301 Jy ! Component: 2550 - total flux cleaned = -0.002882 Jy ! Component: 2600 - total flux cleaned = -0.00286226 Jy ! Component: 2650 - total flux cleaned = -0.00290135 Jy ! Component: 2700 - total flux cleaned = -0.00290133 Jy ! Component: 2750 - total flux cleaned = -0.00293987 Jy ! Component: 2800 - total flux cleaned = -0.00307399 Jy ! Component: 2850 - total flux cleaned = -0.0030929 Jy ! Component: 2900 - total flux cleaned = -0.00313075 Jy ! Component: 2950 - total flux cleaned = -0.00314976 Jy ! Component: 3000 - total flux cleaned = -0.00322469 Jy ! Component: 3050 - total flux cleaned = -0.00326214 Jy ! Component: 3100 - total flux cleaned = -0.00329918 Jy ! Component: 3150 - total flux cleaned = -0.00331759 Jy ! Component: 3200 - total flux cleaned = -0.00342772 Jy ! Component: 3250 - total flux cleaned = -0.00340957 Jy ! Component: 3300 - total flux cleaned = -0.00348236 Jy ! Component: 3350 - total flux cleaned = -0.00362702 Jy ! Component: 3400 - total flux cleaned = -0.00360908 Jy ! Component: 3450 - total flux cleaned = -0.00368079 Jy ! Component: 3500 - total flux cleaned = -0.00368082 Jy ! Component: 3550 - total flux cleaned = -0.00371632 Jy ! Component: 3600 - total flux cleaned = -0.00382235 Jy ! Component: 3650 - total flux cleaned = -0.00389261 Jy ! Component: 3700 - total flux cleaned = -0.00389265 Jy ! Component: 3750 - total flux cleaned = -0.00389272 Jy ! Component: 3800 - total flux cleaned = -0.0040313 Jy ! Component: 3850 - total flux cleaned = -0.00399681 Jy ! Component: 3900 - total flux cleaned = -0.00404835 Jy ! Component: 3950 - total flux cleaned = -0.00401428 Jy ! Component: 4000 - total flux cleaned = -0.00413343 Jy ! Component: 4050 - total flux cleaned = -0.00409956 Jy ! Total flux subtracted in 4096 components = -0.00409955 Jy ! Clean residual min=-0.000928 max=0.001182 Jy/beam ! Clean residual mean=-0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.17114 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 325 components and 0.17114 Jy ![Exited script file: muppet] wmap "J2253+1942_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.374 at -5.472 degrees (North through East) ! Clean map min=-0.0019999 max=0.1701 Jy/beam ! Writing clean map to FITS file: J2253+1942_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170097 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315912 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.557173 0.557173 1.11435 2.22869 4.45738 8.91477 17.8295 35.6591 71.3182 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.374 at -5.472 degrees (North through East) ! Clean map min=-0.0019999 max=0.1701 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2253+1942_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:37:44 2019