! Started logfile: J2253+0105_S_2017_01_21_pus_uvs.log on Sun May 5 16:05:49 2019 obs J2253+0105_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2253+0105_S_2017_01_21_pus_uva.fits ! AN table 1: 160 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J2253+0105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 13440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2253+0105_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 375 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 365 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 375 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 769 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982344Jy sigma=0.006668 ! Fit after self-cal, rms=0.933342Jy sigma=0.006404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=6.629 mas, bpa=-5.881 degrees ! Estimated noise=1502.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558537 Jy ! Component: 100 - total flux cleaned = 0.0683085 Jy ! Total flux subtracted in 100 components = 0.0683085 Jy ! Clean residual min=-0.004514 max=0.004286 Jy/beam ! Clean residual mean=-0.000022 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0683085 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0683085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117069Jy sigma=0.000635 ! Fit after self-cal, rms=0.116619Jy sigma=0.000632 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=6.969 mas, bpa=-3.148 degrees ! Estimated noise=997.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054569 Jy ! Component: 100 - total flux cleaned = 0.00771353 Jy ! Component: 150 - total flux cleaned = 0.00859009 Jy ! Component: 200 - total flux cleaned = 0.0085238 Jy ! Total flux subtracted in 200 components = 0.0085238 Jy ! Clean residual min=-0.002635 max=0.002649 Jy/beam ! Clean residual mean=-0.000013 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0768323 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0768323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116343Jy sigma=0.000631 ! Fit after self-cal, rms=0.116362Jy sigma=0.000631 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.98 LA 1.07 ! MK 1.03 NL 1.02 OV 1.04 PT 1.08 ! SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.06 LA 1.03 ! MK 1.07 NL 1.00 OV 0.99 PT 0.99 ! SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 0.95 LA 1.00 ! MK 1.05 NL 0.97 OV 1.04 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.06 HN 0.93 LA 0.94 ! MK 0.91 NL 1.00* OV 0.96 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.116362Jy sigma=0.000631 ! Fit after self-cal, rms=0.115088Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=6.971 mas, bpa=-3.182 degrees ! Estimated noise=999.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237527 Jy ! Component: 100 - total flux cleaned = 0.000237428 Jy ! Component: 150 - total flux cleaned = 0.000261036 Jy ! Component: 200 - total flux cleaned = 0.000301939 Jy ! Total flux subtracted in 200 components = 0.000301939 Jy ! Clean residual min=-0.002567 max=0.002661 Jy/beam ! Clean residual mean=-0.000012 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0771342 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.0771342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115074Jy sigma=0.000630 ! Fit after self-cal, rms=0.114998Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114998Jy sigma=0.000630 ! Fit after self-cal, rms=0.112608Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=6.975 mas, bpa=-3.258 degrees ! Estimated noise=996.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152726 Jy ! Component: 100 - total flux cleaned = -0.000262407 Jy ! Component: 150 - total flux cleaned = -0.000298154 Jy ! Component: 200 - total flux cleaned = -0.000329198 Jy ! Total flux subtracted in 200 components = -0.000329198 Jy ! Clean residual min=-0.002342 max=0.002577 Jy/beam ! Clean residual mean=0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.076805 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.076805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112599Jy sigma=0.000629 ! Fit after self-cal, rms=0.112538Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (88, 72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188509 Jy ! Component: 100 - total flux cleaned = 0.00228316 Jy ! Component: 150 - total flux cleaned = 0.0025488 Jy ! Component: 200 - total flux cleaned = 0.00264273 Jy ! Total flux subtracted in 200 components = 0.00264273 Jy ! Clean residual min=-0.002388 max=0.002025 Jy/beam ! Clean residual mean=-0.000007 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0794477 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.0794477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112476Jy sigma=0.000628 ! Fit after self-cal, rms=0.112464Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112464Jy sigma=0.000628 ! Fit after self-cal, rms=0.112213Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=6.984 mas, bpa=-3.426 degrees ! Estimated noise=995.475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118369 Jy ! Component: 100 - total flux cleaned = 0.00129618 Jy ! Component: 150 - total flux cleaned = 0.00135757 Jy ! Component: 200 - total flux cleaned = 0.00135903 Jy ! Total flux subtracted in 200 components = 0.00135903 Jy ! Clean residual min=-0.002397 max=0.002073 Jy/beam ! Clean residual mean=-0.000005 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0808068 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 0.0808068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112180Jy sigma=0.000628 ! Fit after self-cal, rms=0.112176Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397795 Jy ! Component: 100 - total flux cleaned = 0.000343006 Jy ! Component: 150 - total flux cleaned = 0.000366795 Jy ! Component: 200 - total flux cleaned = 0.000386428 Jy ! Total flux subtracted in 200 components = 0.000386428 Jy ! Clean residual min=-0.002392 max=0.002024 Jy/beam ! Clean residual mean=-0.000006 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0811932 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 60 components and 0.0811932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112160Jy sigma=0.000628 ! Fit after self-cal, rms=0.112160Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112160Jy sigma=0.000628 ! Fit after self-cal, rms=0.112166Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.108 mas, bmaj=11.32 mas, bpa=2.792 degrees ! Estimated noise=1301.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450235 Jy ! Component: 100 - total flux cleaned = 0.000710334 Jy ! Component: 150 - total flux cleaned = 0.000794775 Jy ! Component: 200 - total flux cleaned = 0.000824244 Jy ! Total flux subtracted in 200 components = 0.000824244 Jy ! Clean residual min=-0.002640 max=0.002105 Jy/beam ! Clean residual mean=-0.000008 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0820174 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.0820174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112159Jy sigma=0.000628 ! Fit after self-cal, rms=0.112164Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108384 Jy ! Component: 100 - total flux cleaned = 0.000152131 Jy ! Component: 150 - total flux cleaned = 0.000165731 Jy ! Component: 200 - total flux cleaned = 0.000178351 Jy ! Total flux subtracted in 200 components = 0.000178351 Jy ! Clean residual min=-0.002649 max=0.002076 Jy/beam ! Clean residual mean=-0.000008 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0821958 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.0821958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112160Jy sigma=0.000628 ! Fit after self-cal, rms=0.112157Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=6.989 mas, bpa=-3.519 degrees ! Estimated noise=996.059 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 6.989 at -3.519 degrees (North through East) ! Clean map min=-0.0023281 max=0.073182 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=6.649 mas, bpa=-6.379 degrees ! Estimated noise=1489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552722 Jy ! Component: 100 - total flux cleaned = 0.0680464 Jy ! Component: 150 - total flux cleaned = 0.0739722 Jy ! Component: 200 - total flux cleaned = 0.0771837 Jy ! Total flux subtracted in 200 components = 0.0771837 Jy ! Clean residual min=-0.003561 max=0.003500 Jy/beam ! Clean residual mean=-0.000011 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.0771838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0771838 Jy ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=6.989 mas, bpa=-3.519 degrees ! Estimated noise=996.059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271004 Jy ! Component: 100 - total flux cleaned = 0.00312523 Jy ! Component: 150 - total flux cleaned = 0.00348369 Jy ! Component: 200 - total flux cleaned = 0.00385434 Jy ! Total flux subtracted in 200 components = 0.00385434 Jy ! Clean residual min=-0.002591 max=0.002105 Jy/beam ! Clean residual mean=-0.000005 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0810381 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0810381 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.108 mas, bmaj=11.32 mas, bpa=2.792 degrees ! Estimated noise=1301.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969764 Jy ! Component: 100 - total flux cleaned = 0.0011099 Jy ! Component: 150 - total flux cleaned = 0.00116835 Jy ! Component: 200 - total flux cleaned = 0.00124668 Jy ! Total flux subtracted in 200 components = 0.00124668 Jy ! Clean residual min=-0.002648 max=0.002138 Jy/beam ! Clean residual mean=-0.000006 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0822848 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.82192e-05 Jy ! Component: 100 - total flux cleaned = 0.000113165 Jy ! Component: 150 - total flux cleaned = 0.00015303 Jy ! Component: 200 - total flux cleaned = 0.000190332 Jy ! Total flux subtracted in 200 components = 0.000190332 Jy ! Clean residual min=-0.002612 max=0.002072 Jy/beam ! Clean residual mean=-0.000007 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0824751 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.0824751 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=6.989 mas, bpa=-3.519 degrees ! Estimated noise=996.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129 Jy ! Component: 100 - total flux cleaned = 9.40983e-05 Jy ! Component: 150 - total flux cleaned = 6.34198e-05 Jy ! Component: 200 - total flux cleaned = 7.38889e-06 Jy ! Total flux subtracted in 200 components = 7.38889e-06 Jy ! Clean residual min=-0.002404 max=0.002011 Jy/beam ! Clean residual mean=-0.000005 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0824825 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.0824825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112170Jy sigma=0.000628 ! Fit after self-cal, rms=0.112165Jy sigma=0.000628 wmodel J2253+0105_S_2017_01_21_pus_map.mod ! Writing 73 model components to file: J2253+0105_S_2017_01_21_pus_map.mod wobs J2253+0105_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2253+0105_S_2017_01_21_pus_uvs.fits wwins J2253+0105_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J2253+0105_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000989559 Jy ! Component: 100 - total flux cleaned = -0.00136979 Jy ! Component: 150 - total flux cleaned = -0.00147574 Jy ! Component: 200 - total flux cleaned = -0.00178463 Jy ! Component: 250 - total flux cleaned = -0.00194958 Jy ! Component: 300 - total flux cleaned = -0.00214256 Jy ! Component: 350 - total flux cleaned = -0.00242249 Jy ! Component: 400 - total flux cleaned = -0.00263419 Jy ! Component: 450 - total flux cleaned = -0.0028696 Jy ! Component: 500 - total flux cleaned = -0.00304166 Jy ! Component: 550 - total flux cleaned = -0.00323894 Jy ! Component: 600 - total flux cleaned = -0.00345921 Jy ! Component: 650 - total flux cleaned = -0.00362047 Jy ! Component: 700 - total flux cleaned = -0.00364739 Jy ! Component: 750 - total flux cleaned = -0.00380369 Jy ! Component: 800 - total flux cleaned = -0.00385455 Jy ! Component: 850 - total flux cleaned = -0.00398004 Jy ! Component: 900 - total flux cleaned = -0.00402963 Jy ! Component: 950 - total flux cleaned = -0.00405408 Jy ! Component: 1000 - total flux cleaned = -0.00410228 Jy ! Component: 1050 - total flux cleaned = -0.00417266 Jy ! Component: 1100 - total flux cleaned = -0.00419591 Jy ! Component: 1150 - total flux cleaned = -0.00424211 Jy ! Component: 1200 - total flux cleaned = -0.00424232 Jy ! Component: 1250 - total flux cleaned = -0.00437662 Jy ! Component: 1300 - total flux cleaned = -0.00437653 Jy ! Component: 1350 - total flux cleaned = -0.00446382 Jy ! Component: 1400 - total flux cleaned = -0.00459271 Jy ! Component: 1450 - total flux cleaned = -0.00459243 Jy ! Component: 1500 - total flux cleaned = -0.00463474 Jy ! Component: 1550 - total flux cleaned = -0.00467654 Jy ! Component: 1600 - total flux cleaned = -0.00475875 Jy ! Component: 1650 - total flux cleaned = -0.00475893 Jy ! Component: 1700 - total flux cleaned = -0.00475919 Jy ! Component: 1750 - total flux cleaned = -0.00477928 Jy ! Component: 1800 - total flux cleaned = -0.00481888 Jy ! Component: 1850 - total flux cleaned = -0.00481889 Jy ! Component: 1900 - total flux cleaned = -0.00481887 Jy ! Component: 1950 - total flux cleaned = -0.00483772 Jy ! Component: 2000 - total flux cleaned = -0.00483754 Jy ! Component: 2050 - total flux cleaned = -0.00483746 Jy ! Component: 2100 - total flux cleaned = -0.004856 Jy ! Component: 2150 - total flux cleaned = -0.00489301 Jy ! Component: 2200 - total flux cleaned = -0.00491119 Jy ! Component: 2250 - total flux cleaned = -0.00492935 Jy ! Component: 2300 - total flux cleaned = -0.0049294 Jy ! Component: 2350 - total flux cleaned = -0.00500088 Jy ! Component: 2400 - total flux cleaned = -0.00501862 Jy ! Component: 2450 - total flux cleaned = -0.00496603 Jy ! Component: 2500 - total flux cleaned = -0.00501847 Jy ! Component: 2550 - total flux cleaned = -0.00501841 Jy ! Component: 2600 - total flux cleaned = -0.00501846 Jy ! Component: 2650 - total flux cleaned = -0.00505259 Jy ! Component: 2700 - total flux cleaned = -0.00503566 Jy ! Component: 2750 - total flux cleaned = -0.00498537 Jy ! Component: 2800 - total flux cleaned = -0.00500191 Jy ! Component: 2850 - total flux cleaned = -0.00491909 Jy ! Component: 2900 - total flux cleaned = -0.00488621 Jy ! Component: 2950 - total flux cleaned = -0.0048537 Jy ! Component: 3000 - total flux cleaned = -0.00485364 Jy ! Component: 3050 - total flux cleaned = -0.00477297 Jy ! Component: 3100 - total flux cleaned = -0.00477302 Jy ! Component: 3150 - total flux cleaned = -0.00472535 Jy ! Component: 3200 - total flux cleaned = -0.0047411 Jy ! Component: 3250 - total flux cleaned = -0.00467846 Jy ! Component: 3300 - total flux cleaned = -0.00463172 Jy ! Component: 3350 - total flux cleaned = -0.00464727 Jy ! Component: 3400 - total flux cleaned = -0.00464725 Jy ! Component: 3450 - total flux cleaned = -0.00460136 Jy ! Component: 3500 - total flux cleaned = -0.00451011 Jy ! Component: 3550 - total flux cleaned = -0.0045553 Jy ! Component: 3600 - total flux cleaned = -0.00445044 Jy ! Component: 3650 - total flux cleaned = -0.00446532 Jy ! Component: 3700 - total flux cleaned = -0.00439128 Jy ! Component: 3750 - total flux cleaned = -0.00442068 Jy ! Component: 3800 - total flux cleaned = -0.00442051 Jy ! Component: 3850 - total flux cleaned = -0.00442051 Jy ! Component: 3900 - total flux cleaned = -0.00439143 Jy ! Component: 3950 - total flux cleaned = -0.004377 Jy ! Component: 4000 - total flux cleaned = -0.00439127 Jy ! Component: 4050 - total flux cleaned = -0.00439113 Jy ! Total flux subtracted in 4096 components = -0.00434868 Jy ! Clean residual min=-0.000768 max=0.000825 Jy/beam ! Clean residual mean=-0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0781338 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 373 components and 0.0781338 Jy ![Exited script file: muppet] wmap "J2253+0105_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 6.989 at -3.519 degrees (North through East) ! Clean map min=-0.0020646 max=0.072513 Jy/beam ! Writing clean map to FITS file: J2253+0105_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0725128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261253 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08086 1.08086 2.16171 4.32343 8.64685 17.2937 34.5874 69.1748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 6.989 at -3.519 degrees (North through East) ! Clean map min=-0.0020646 max=0.072513 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2253+0105_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:05:55 2019