! Started logfile: J2252-2751_S_2017_10_21_pus_uvs.log on Sat May 11 21:07:37 2019 obs J2252-2751_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2252-2751_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.873288 visibilities/baseline/integration-bin. ! Found source: J2252-2751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2252-2751_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 670 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961149Jy sigma=0.007248 ! Fit after self-cal, rms=0.932471Jy sigma=0.007067 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=12.38 mas, bpa=-18.39 degrees ! Estimated noise=1616.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0537635 Jy ! Component: 100 - total flux cleaned = 0.0684594 Jy ! Total flux subtracted in 100 components = 0.0684594 Jy ! Clean residual min=-0.006013 max=0.006688 Jy/beam ! Clean residual mean=-0.000054 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.0684594 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0684594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104413Jy sigma=0.000706 ! Fit after self-cal, rms=0.104187Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=14.78 mas, bpa=-16.79 degrees ! Estimated noise=823.294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108051 Jy ! Component: 100 - total flux cleaned = 0.0162647 Jy ! Component: 150 - total flux cleaned = 0.0192795 Jy ! Component: 200 - total flux cleaned = 0.0209845 Jy ! Total flux subtracted in 200 components = 0.0209845 Jy ! Clean residual min=-0.003400 max=0.003099 Jy/beam ! Clean residual mean=-0.000055 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.0894439 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 53 components and 0.0894439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103141Jy sigma=0.000696 ! Fit after self-cal, rms=0.103173Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.15 KP 1.06 ! LA 1.02 MK 1.09 NL 0.89 OV 1.04 ! PT 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.04 KP 1.09 ! LA 1.02 MK 1.05 NL 1.03 OV 1.06 ! PT 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.05 KP 1.07 ! LA 0.76 MK 1.07 NL 1.24 OV 0.93 ! PT 0.89 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.75 KP 1.00* ! LA 1.04 MK 0.89 NL 1.00* OV 1.00* ! PT 0.77 ! ! ! Fit before self-cal, rms=0.103173Jy sigma=0.000695 ! Fit after self-cal, rms=0.102919Jy sigma=0.000692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=14.95 mas, bpa=-16.63 degrees ! Estimated noise=825.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145874 Jy ! Component: 100 - total flux cleaned = -0.00028538 Jy ! Component: 150 - total flux cleaned = -0.000258027 Jy ! Component: 200 - total flux cleaned = -0.000278263 Jy ! Total flux subtracted in 200 components = -0.000278263 Jy ! Clean residual min=-0.002287 max=0.002316 Jy/beam ! Clean residual mean=-0.000009 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0891657 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.0891657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102891Jy sigma=0.000692 ! Fit after self-cal, rms=0.103146Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103146Jy sigma=0.000691 ! Fit after self-cal, rms=0.104893Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=14.99 mas, bpa=-16.73 degrees ! Estimated noise=827.047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301379 Jy ! Component: 100 - total flux cleaned = 0.00027553 Jy ! Component: 150 - total flux cleaned = 0.000316151 Jy ! Component: 200 - total flux cleaned = 0.000315706 Jy ! Total flux subtracted in 200 components = 0.000315706 Jy ! Clean residual min=-0.001976 max=0.002447 Jy/beam ! Clean residual mean=-0.000008 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0894814 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.0894814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104877Jy sigma=0.000690 ! Fit after self-cal, rms=0.105091Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121201 Jy ! Component: 100 - total flux cleaned = 0.0010512 Jy ! Component: 150 - total flux cleaned = 0.00100455 Jy ! Component: 200 - total flux cleaned = 0.00111639 Jy ! Total flux subtracted in 200 components = 0.00111639 Jy ! Clean residual min=-0.001777 max=0.001992 Jy/beam ! Clean residual mean=-0.000010 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0905978 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.0905978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105018Jy sigma=0.000689 ! Fit after self-cal, rms=0.105044Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105044Jy sigma=0.000689 ! Fit after self-cal, rms=0.105818Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=15 mas, bpa=-16.76 degrees ! Estimated noise=827.061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604378 Jy ! Component: 100 - total flux cleaned = 0.000602504 Jy ! Component: 150 - total flux cleaned = 0.000494404 Jy ! Component: 200 - total flux cleaned = 0.00039429 Jy ! Total flux subtracted in 200 components = 0.00039429 Jy ! Clean residual min=-0.001744 max=0.001949 Jy/beam ! Clean residual mean=-0.000007 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0909921 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.0909921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105778Jy sigma=0.000689 ! Fit after self-cal, rms=0.105910Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08352e-05 Jy ! Component: 100 - total flux cleaned = -7.67953e-05 Jy ! Component: 150 - total flux cleaned = -0.000174169 Jy ! Component: 200 - total flux cleaned = -0.000265654 Jy ! Total flux subtracted in 200 components = -0.000265654 Jy ! Clean residual min=-0.001735 max=0.001970 Jy/beam ! Clean residual mean=-0.000009 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0907264 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.0907264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105883Jy sigma=0.000689 ! Fit after self-cal, rms=0.105902Jy sigma=0.000689 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105902Jy sigma=0.000689 ! Fit after self-cal, rms=0.106817Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.242 mas, bmaj=26.96 mas, bpa=-4.49 degrees ! Estimated noise=967.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.22726e-05 Jy ! Component: 100 - total flux cleaned = -7.82093e-06 Jy ! Component: 150 - total flux cleaned = -2.56867e-05 Jy ! Component: 200 - total flux cleaned = -7.38072e-05 Jy ! Total flux subtracted in 200 components = -7.38072e-05 Jy ! Clean residual min=-0.001763 max=0.001831 Jy/beam ! Clean residual mean=-0.000014 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0906526 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 138 components and 0.0906526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106808Jy sigma=0.000689 ! Fit after self-cal, rms=0.106885Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.01646e-06 Jy ! Component: 100 - total flux cleaned = -5.26231e-05 Jy ! Component: 150 - total flux cleaned = -6.89682e-05 Jy ! Component: 200 - total flux cleaned = -8.35934e-05 Jy ! Total flux subtracted in 200 components = -8.35934e-05 Jy ! Clean residual min=-0.001810 max=0.001840 Jy/beam ! Clean residual mean=-0.000016 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.090569 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 146 components and 0.090569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106878Jy sigma=0.000688 ! Fit after self-cal, rms=0.106878Jy sigma=0.000688 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=15.02 mas, bpa=-16.78 degrees ! Estimated noise=827.413 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 15.02 at -16.78 degrees (North through East) ! Clean map min=-0.0030688 max=0.069525 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=12.53 mas, bpa=-18.6 degrees ! Estimated noise=1635.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529721 Jy ! Component: 100 - total flux cleaned = 0.06999 Jy ! Component: 150 - total flux cleaned = 0.0786779 Jy ! Component: 200 - total flux cleaned = 0.0834614 Jy ! Total flux subtracted in 200 components = 0.0834614 Jy ! Clean residual min=-0.005236 max=0.005164 Jy/beam ! Clean residual mean=-0.000020 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.0834614 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0834614 Jy ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=15.02 mas, bpa=-16.78 degrees ! Estimated noise=827.413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359184 Jy ! Component: 100 - total flux cleaned = 0.00480278 Jy ! Component: 150 - total flux cleaned = 0.00571111 Jy ! Component: 200 - total flux cleaned = 0.00612165 Jy ! Total flux subtracted in 200 components = 0.00612165 Jy ! Clean residual min=-0.002048 max=0.002196 Jy/beam ! Clean residual mean=-0.000011 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.089583 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 62 components and 0.089583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.242 mas, bmaj=26.96 mas, bpa=-4.49 degrees ! Estimated noise=967.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000723667 Jy ! Component: 100 - total flux cleaned = 0.00119567 Jy ! Component: 150 - total flux cleaned = 0.00142995 Jy ! Component: 200 - total flux cleaned = 0.00151792 Jy ! Total flux subtracted in 200 components = 0.00151792 Jy ! Clean residual min=-0.001949 max=0.001903 Jy/beam ! Clean residual mean=-0.000014 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0911009 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6972e-07 Jy ! Component: 100 - total flux cleaned = 2.48118e-05 Jy ! Component: 150 - total flux cleaned = 2.471e-05 Jy ! Component: 200 - total flux cleaned = 4.92116e-06 Jy ! Total flux subtracted in 200 components = 4.92116e-06 Jy ! Clean residual min=-0.001849 max=0.001790 Jy/beam ! Clean residual mean=-0.000013 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0911059 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 104 components and 0.0911059 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=15.02 mas, bpa=-16.78 degrees ! Estimated noise=827.413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015344 Jy ! Component: 100 - total flux cleaned = -0.00027811 Jy ! Component: 150 - total flux cleaned = -0.000279586 Jy ! Component: 200 - total flux cleaned = -0.000281081 Jy ! Total flux subtracted in 200 components = -0.000281081 Jy ! Clean residual min=-0.001794 max=0.001994 Jy/beam ! Clean residual mean=-0.000008 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0908248 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.0908248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106869Jy sigma=0.000688 ! Fit after self-cal, rms=0.106881Jy sigma=0.000688 wmodel J2252-2751_S_2017_10_21_pus_map.mod ! Writing 131 model components to file: J2252-2751_S_2017_10_21_pus_map.mod wobs J2252-2751_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2252-2751_S_2017_10_21_pus_uvs.fits wwins J2252-2751_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J2252-2751_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582452 Jy ! Component: 100 - total flux cleaned = 0.000943559 Jy ! Component: 150 - total flux cleaned = 0.00121951 Jy ! Component: 200 - total flux cleaned = 0.0014522 Jy ! Component: 250 - total flux cleaned = 0.00161885 Jy ! Component: 300 - total flux cleaned = 0.00185907 Jy ! Component: 350 - total flux cleaned = 0.00201321 Jy ! Component: 400 - total flux cleaned = 0.00213848 Jy ! Component: 450 - total flux cleaned = 0.00226072 Jy ! Component: 500 - total flux cleaned = 0.00233259 Jy ! Component: 550 - total flux cleaned = 0.00244887 Jy ! Component: 600 - total flux cleaned = 0.00251606 Jy ! Component: 650 - total flux cleaned = 0.00255975 Jy ! Component: 700 - total flux cleaned = 0.00258158 Jy ! Component: 750 - total flux cleaned = 0.00268783 Jy ! Component: 800 - total flux cleaned = 0.00283322 Jy ! Component: 850 - total flux cleaned = 0.00295504 Jy ! Component: 900 - total flux cleaned = 0.00309488 Jy ! Component: 950 - total flux cleaned = 0.00321273 Jy ! Component: 1000 - total flux cleaned = 0.00338675 Jy ! Component: 1050 - total flux cleaned = 0.00348171 Jy ! Component: 1100 - total flux cleaned = 0.00363205 Jy ! Component: 1150 - total flux cleaned = 0.00372435 Jy ! Component: 1200 - total flux cleaned = 0.00383395 Jy ! Component: 1250 - total flux cleaned = 0.00390633 Jy ! Component: 1300 - total flux cleaned = 0.00403075 Jy ! Component: 1350 - total flux cleaned = 0.00401372 Jy ! Component: 1400 - total flux cleaned = 0.00411763 Jy ! Component: 1450 - total flux cleaned = 0.00415169 Jy ! Component: 1500 - total flux cleaned = 0.0041682 Jy ! Component: 1550 - total flux cleaned = 0.00416795 Jy ! Component: 1600 - total flux cleaned = 0.00418442 Jy ! Component: 1650 - total flux cleaned = 0.00420097 Jy ! Component: 1700 - total flux cleaned = 0.00428191 Jy ! Component: 1750 - total flux cleaned = 0.00425 Jy ! Component: 1800 - total flux cleaned = 0.0042975 Jy ! Component: 1850 - total flux cleaned = 0.00429748 Jy ! Component: 1900 - total flux cleaned = 0.00428222 Jy ! Component: 1950 - total flux cleaned = 0.00428242 Jy ! Component: 2000 - total flux cleaned = 0.00434317 Jy ! Component: 2050 - total flux cleaned = 0.00431334 Jy ! Component: 2100 - total flux cleaned = 0.00440239 Jy ! Component: 2150 - total flux cleaned = 0.00435815 Jy ! Component: 2200 - total flux cleaned = 0.00434361 Jy ! Component: 2250 - total flux cleaned = 0.00435816 Jy ! Component: 2300 - total flux cleaned = 0.00438678 Jy ! Component: 2350 - total flux cleaned = 0.0043442 Jy ! Component: 2400 - total flux cleaned = 0.00434437 Jy ! Component: 2450 - total flux cleaned = 0.00434442 Jy ! Component: 2500 - total flux cleaned = 0.0043444 Jy ! Component: 2550 - total flux cleaned = 0.00441289 Jy ! Component: 2600 - total flux cleaned = 0.00438561 Jy ! Component: 2650 - total flux cleaned = 0.00442601 Jy ! Component: 2700 - total flux cleaned = 0.00441269 Jy ! Component: 2750 - total flux cleaned = 0.00441276 Jy ! Component: 2800 - total flux cleaned = 0.0044392 Jy ! Component: 2850 - total flux cleaned = 0.00451744 Jy ! Component: 2900 - total flux cleaned = 0.0045303 Jy ! Component: 2950 - total flux cleaned = 0.00454313 Jy ! Component: 3000 - total flux cleaned = 0.00456858 Jy ! Component: 3050 - total flux cleaned = 0.00460634 Jy ! Component: 3100 - total flux cleaned = 0.0045561 Jy ! Component: 3150 - total flux cleaned = 0.00454361 Jy ! Component: 3200 - total flux cleaned = 0.00454368 Jy ! Component: 3250 - total flux cleaned = 0.004556 Jy ! Component: 3300 - total flux cleaned = 0.0045559 Jy ! Component: 3350 - total flux cleaned = 0.00456816 Jy ! Component: 3400 - total flux cleaned = 0.0045922 Jy ! Component: 3450 - total flux cleaned = 0.00459213 Jy ! Component: 3500 - total flux cleaned = 0.00462782 Jy ! Component: 3550 - total flux cleaned = 0.00460418 Jy ! Component: 3600 - total flux cleaned = 0.00460417 Jy ! Component: 3650 - total flux cleaned = 0.00463912 Jy ! Component: 3700 - total flux cleaned = 0.00461594 Jy ! Component: 3750 - total flux cleaned = 0.00460442 Jy ! Component: 3800 - total flux cleaned = 0.00461597 Jy ! Component: 3850 - total flux cleaned = 0.00457036 Jy ! Component: 3900 - total flux cleaned = 0.0045817 Jy ! Component: 3950 - total flux cleaned = 0.00451397 Jy ! Component: 4000 - total flux cleaned = 0.00454766 Jy ! Component: 4050 - total flux cleaned = 0.00453631 Jy ! Total flux subtracted in 4096 components = 0.0044586 Jy ! Clean residual min=-0.000700 max=0.000634 Jy/beam ! Clean residual mean=-0.000004 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0952834 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 411 components and 0.0952834 Jy ![Exited script file: muppet] wmap "J2252-2751_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 15.02 at -16.78 degrees (North through East) ! Clean map min=-0.0030375 max=0.068825 Jy/beam ! Writing clean map to FITS file: J2252-2751_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0688251 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.875192 0.875192 1.75038 3.50077 7.00154 14.0031 28.0062 56.0123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 15.02 at -16.78 degrees (North through East) ! Clean map min=-0.0030375 max=0.068825 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2252-2751_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:07:42 2019