! Started logfile: J2252-2751_S_2017_08_12_pus_uvs.log on Fri May 10 15:10:08 2019 obs J2252-2751_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2252-2751_S_2017_08_12_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.46269 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2252-2751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 7912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2252-2751_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 343 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 875 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975889Jy sigma=0.006631 ! Fit after self-cal, rms=0.933759Jy sigma=0.006370 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.396 mas, bmaj=7.345 mas, bpa=0.1078 degrees ! Estimated noise=2266.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530493 Jy ! Component: 100 - total flux cleaned = 0.06661 Jy ! Total flux subtracted in 100 components = 0.06661 Jy ! Clean residual min=-0.007124 max=0.006216 Jy/beam ! Clean residual mean=-0.000038 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.06661 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.06661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101047Jy sigma=0.000637 ! Fit after self-cal, rms=0.100316Jy sigma=0.000634 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=8.396 mas, bpa=2.394 degrees ! Estimated noise=1414.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102276 Jy ! Component: 100 - total flux cleaned = 0.0154828 Jy ! Component: 150 - total flux cleaned = 0.0183119 Jy ! Component: 200 - total flux cleaned = 0.0198593 Jy ! Total flux subtracted in 200 components = 0.0198593 Jy ! Clean residual min=-0.003583 max=0.003479 Jy/beam ! Clean residual mean=-0.000025 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0864693 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 48 components and 0.0864693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099375Jy sigma=0.000626 ! Fit after self-cal, rms=0.099086Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 0.97 ! LA 1.01 MK 1.01 NL 0.86 OV 1.00 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.91 ! LA 0.96 MK 0.99 NL 1.10 OV 1.08 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.95 ! LA 0.95 MK 1.20 NL 0.94 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.099086Jy sigma=0.000625 ! Fit after self-cal, rms=0.099071Jy sigma=0.000626 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=8.587 mas, bpa=3.18 degrees ! Estimated noise=1415.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214593 Jy ! Component: 100 - total flux cleaned = -0.000167268 Jy ! Component: 150 - total flux cleaned = -0.000212243 Jy ! Component: 200 - total flux cleaned = -0.000249712 Jy ! Total flux subtracted in 200 components = -0.000249712 Jy ! Clean residual min=-0.003513 max=0.003812 Jy/beam ! Clean residual mean=-0.000021 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0862195 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.0862195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099028Jy sigma=0.000626 ! Fit after self-cal, rms=0.099017Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099017Jy sigma=0.000625 ! Fit after self-cal, rms=0.099802Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=8.585 mas, bpa=3.243 degrees ! Estimated noise=1415.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385196 Jy ! Component: 100 - total flux cleaned = 0.000384505 Jy ! Component: 150 - total flux cleaned = 0.000341104 Jy ! Component: 200 - total flux cleaned = 0.000303273 Jy ! Total flux subtracted in 200 components = 0.000303273 Jy ! Clean residual min=-0.003322 max=0.003730 Jy/beam ! Clean residual mean=-0.000017 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0865228 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.0865228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099761Jy sigma=0.000625 ! Fit after self-cal, rms=0.099745Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (41.5, -59.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196607 Jy ! Component: 100 - total flux cleaned = 0.00272373 Jy ! Component: 150 - total flux cleaned = 0.00304012 Jy ! Component: 200 - total flux cleaned = 0.00332006 Jy ! Total flux subtracted in 200 components = 0.00332006 Jy ! Clean residual min=-0.003394 max=0.002847 Jy/beam ! Clean residual mean=-0.000010 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0898429 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.0898429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099625Jy sigma=0.000624 ! Fit after self-cal, rms=0.099533Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099533Jy sigma=0.000623 ! Fit after self-cal, rms=0.099722Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=8.572 mas, bpa=3.397 degrees ! Estimated noise=1401.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108371 Jy ! Component: 100 - total flux cleaned = 0.00112408 Jy ! Component: 150 - total flux cleaned = 0.00125879 Jy ! Component: 200 - total flux cleaned = 0.00129928 Jy ! Total flux subtracted in 200 components = 0.00129928 Jy ! Clean residual min=-0.003302 max=0.002872 Jy/beam ! Clean residual mean=-0.000007 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0911422 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.0911422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099653Jy sigma=0.000623 ! Fit after self-cal, rms=0.099701Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257794 Jy ! Component: 100 - total flux cleaned = 0.000168835 Jy ! Component: 150 - total flux cleaned = 0.000205601 Jy ! Component: 200 - total flux cleaned = 0.000205007 Jy ! Total flux subtracted in 200 components = 0.000205007 Jy ! Clean residual min=-0.003251 max=0.002747 Jy/beam ! Clean residual mean=-0.000008 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0913472 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.0913472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099660Jy sigma=0.000622 ! Fit after self-cal, rms=0.099629Jy sigma=0.000622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099629Jy sigma=0.000622 ! Fit after self-cal, rms=0.099872Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.724 mas, bmaj=17.97 mas, bpa=1.884 degrees ! Estimated noise=1840.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000424236 Jy ! Component: 100 - total flux cleaned = -0.000550915 Jy ! Component: 150 - total flux cleaned = -0.0005519 Jy ! Component: 200 - total flux cleaned = -0.000551903 Jy ! Total flux subtracted in 200 components = -0.000551903 Jy ! Clean residual min=-0.002920 max=0.002498 Jy/beam ! Clean residual mean=-0.000019 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0907953 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 0.0907953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099859Jy sigma=0.000622 ! Fit after self-cal, rms=0.099890Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00026971 Jy ! Component: 100 - total flux cleaned = -0.000324205 Jy ! Component: 150 - total flux cleaned = -0.000323076 Jy ! Component: 200 - total flux cleaned = -0.000299669 Jy ! Total flux subtracted in 200 components = -0.000299669 Jy ! Clean residual min=-0.002883 max=0.002468 Jy/beam ! Clean residual mean=-0.000021 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0904956 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.0904956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099880Jy sigma=0.000622 ! Fit after self-cal, rms=0.099882Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=8.56 mas, bpa=3.538 degrees ! Estimated noise=1397.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.879 x 8.56 at 3.538 degrees (North through East) ! Clean map min=-0.0030176 max=0.07114 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=7.442 mas, bpa=1.6 degrees ! Estimated noise=2266.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516644 Jy ! Component: 100 - total flux cleaned = 0.06724 Jy ! Component: 150 - total flux cleaned = 0.0743694 Jy ! Component: 200 - total flux cleaned = 0.0783269 Jy ! Total flux subtracted in 200 components = 0.0783269 Jy ! Clean residual min=-0.006454 max=0.005449 Jy/beam ! Clean residual mean=-0.000021 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.0783269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0783269 Jy ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=8.56 mas, bpa=3.538 degrees ! Estimated noise=1397.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667344 Jy ! Component: 100 - total flux cleaned = 0.01026 Jy ! Component: 150 - total flux cleaned = 0.0115235 Jy ! Component: 200 - total flux cleaned = 0.0120312 Jy ! Total flux subtracted in 200 components = 0.0120312 Jy ! Clean residual min=-0.003387 max=0.003000 Jy/beam ! Clean residual mean=-0.000010 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0903581 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.0903582 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.724 mas, bmaj=17.97 mas, bpa=1.884 degrees ! Estimated noise=1840.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338948 Jy ! Component: 100 - total flux cleaned = 0.000282941 Jy ! Component: 150 - total flux cleaned = 0.000332436 Jy ! Component: 200 - total flux cleaned = 0.000332786 Jy ! Total flux subtracted in 200 components = 0.000332786 Jy ! Clean residual min=-0.003314 max=0.002581 Jy/beam ! Clean residual mean=-0.000020 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0906909 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.92825e-07 Jy ! Component: 100 - total flux cleaned = 3.84766e-05 Jy ! Component: 150 - total flux cleaned = 3.8808e-05 Jy ! Component: 200 - total flux cleaned = 7.19967e-05 Jy ! Total flux subtracted in 200 components = 7.19967e-05 Jy ! Clean residual min=-0.003156 max=0.002484 Jy/beam ! Clean residual mean=-0.000019 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.0907629 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.0907629 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=8.56 mas, bpa=3.538 degrees ! Estimated noise=1397.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326601 Jy ! Component: 100 - total flux cleaned = -0.000263106 Jy ! Component: 150 - total flux cleaned = -0.000314639 Jy ! Component: 200 - total flux cleaned = -0.000313022 Jy ! Total flux subtracted in 200 components = -0.000313022 Jy ! Clean residual min=-0.003290 max=0.002569 Jy/beam ! Clean residual mean=-0.000009 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0904499 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.0904499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099885Jy sigma=0.000622 ! Fit after self-cal, rms=0.099862Jy sigma=0.000622 wmodel J2252-2751_S_2017_08_12_pus_map.mod ! Writing 84 model components to file: J2252-2751_S_2017_08_12_pus_map.mod wobs J2252-2751_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2252-2751_S_2017_08_12_pus_uvs.fits wwins J2252-2751_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J2252-2751_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140457 Jy ! Component: 100 - total flux cleaned = -0.00202846 Jy ! Component: 150 - total flux cleaned = -0.00237289 Jy ! Component: 200 - total flux cleaned = -0.00277317 Jy ! Component: 250 - total flux cleaned = -0.00314884 Jy ! Component: 300 - total flux cleaned = -0.00339905 Jy ! Component: 350 - total flux cleaned = -0.00353606 Jy ! Component: 400 - total flux cleaned = -0.00363557 Jy ! Component: 450 - total flux cleaned = -0.00376251 Jy ! Component: 500 - total flux cleaned = -0.00382326 Jy ! Component: 550 - total flux cleaned = -0.00376494 Jy ! Component: 600 - total flux cleaned = -0.00376618 Jy ! Component: 650 - total flux cleaned = -0.00379455 Jy ! Component: 700 - total flux cleaned = -0.00384889 Jy ! Component: 750 - total flux cleaned = -0.00390121 Jy ! Component: 800 - total flux cleaned = -0.00382468 Jy ! Component: 850 - total flux cleaned = -0.00387429 Jy ! Component: 900 - total flux cleaned = -0.00384955 Jy ! Component: 950 - total flux cleaned = -0.00380213 Jy ! Component: 1000 - total flux cleaned = -0.00377824 Jy ! Component: 1050 - total flux cleaned = -0.00357307 Jy ! Component: 1100 - total flux cleaned = -0.00350665 Jy ! Component: 1150 - total flux cleaned = -0.00335322 Jy ! Component: 1200 - total flux cleaned = -0.00331097 Jy ! Component: 1250 - total flux cleaned = -0.00322594 Jy ! Component: 1300 - total flux cleaned = -0.00310093 Jy ! Component: 1350 - total flux cleaned = -0.002999 Jy ! Component: 1400 - total flux cleaned = -0.00289877 Jy ! Component: 1450 - total flux cleaned = -0.00274048 Jy ! Component: 1500 - total flux cleaned = -0.00274074 Jy ! Component: 1550 - total flux cleaned = -0.00254819 Jy ! Component: 1600 - total flux cleaned = -0.00249116 Jy ! Component: 1650 - total flux cleaned = -0.00234186 Jy ! Component: 1700 - total flux cleaned = -0.00226857 Jy ! Component: 1750 - total flux cleaned = -0.00223195 Jy ! Component: 1800 - total flux cleaned = -0.00208774 Jy ! Component: 1850 - total flux cleaned = -0.00199907 Jy ! Component: 1900 - total flux cleaned = -0.00199904 Jy ! Component: 1950 - total flux cleaned = -0.00186065 Jy ! Component: 2000 - total flux cleaned = -0.00187799 Jy ! Component: 2050 - total flux cleaned = -0.00177711 Jy ! Component: 2100 - total flux cleaned = -0.00172712 Jy ! Component: 2150 - total flux cleaned = -0.00162851 Jy ! Component: 2200 - total flux cleaned = -0.00161211 Jy ! Component: 2250 - total flux cleaned = -0.00154787 Jy ! Component: 2300 - total flux cleaned = -0.00150013 Jy ! Component: 2350 - total flux cleaned = -0.00140553 Jy ! Component: 2400 - total flux cleaned = -0.00138989 Jy ! Component: 2450 - total flux cleaned = -0.0013745 Jy ! Component: 2500 - total flux cleaned = -0.00134377 Jy ! Component: 2550 - total flux cleaned = -0.00131371 Jy ! Component: 2600 - total flux cleaned = -0.00128378 Jy ! Component: 2650 - total flux cleaned = -0.00126893 Jy ! Component: 2700 - total flux cleaned = -0.00128375 Jy ! Component: 2750 - total flux cleaned = -0.00124009 Jy ! Component: 2800 - total flux cleaned = -0.00126896 Jy ! Component: 2850 - total flux cleaned = -0.00122607 Jy ! Component: 2900 - total flux cleaned = -0.00124047 Jy ! Component: 2950 - total flux cleaned = -0.00122647 Jy ! Component: 3000 - total flux cleaned = -0.00126793 Jy ! Component: 3050 - total flux cleaned = -0.00129528 Jy ! Component: 3100 - total flux cleaned = -0.0011999 Jy ! Component: 3150 - total flux cleaned = -0.00115943 Jy ! Component: 3200 - total flux cleaned = -0.00110584 Jy ! Component: 3250 - total flux cleaned = -0.00110575 Jy ! Component: 3300 - total flux cleaned = -0.00105288 Jy ! Component: 3350 - total flux cleaned = -0.00103982 Jy ! Component: 3400 - total flux cleaned = -0.00101384 Jy ! Component: 3450 - total flux cleaned = -0.000988031 Jy ! Component: 3500 - total flux cleaned = -0.00100068 Jy ! Component: 3550 - total flux cleaned = -0.00095001 Jy ! Component: 3600 - total flux cleaned = -0.000937451 Jy ! Component: 3650 - total flux cleaned = -0.000875044 Jy ! Component: 3700 - total flux cleaned = -0.000899932 Jy ! Component: 3750 - total flux cleaned = -0.000862886 Jy ! Component: 3800 - total flux cleaned = -0.000838303 Jy ! Component: 3850 - total flux cleaned = -0.000826156 Jy ! Component: 3900 - total flux cleaned = -0.000802065 Jy ! Component: 3950 - total flux cleaned = -0.00080201 Jy ! Component: 4000 - total flux cleaned = -0.000754044 Jy ! Component: 4050 - total flux cleaned = -0.000682716 Jy ! Total flux subtracted in 4096 components = -0.000611881 Jy ! Clean residual min=-0.000882 max=0.000682 Jy/beam ! Clean residual mean=0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.089838 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 378 components and 0.089838 Jy ![Exited script file: muppet] wmap "J2252-2751_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.879 x 8.56 at 3.538 degrees (North through East) ! Clean map min=-0.0024159 max=0.070523 Jy/beam ! Writing clean map to FITS file: J2252-2751_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.884135 0.884135 1.76827 3.53654 7.07308 14.1462 28.2923 56.5847 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.879 x 8.56 at 3.538 degrees (North through East) ! Clean map min=-0.0024159 max=0.070523 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2252-2751_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:10:13 2019