! Started logfile: J2249-3039_S_2017_04_28_pus_uvs.log on Thu May 2 16:34:53 2019 obs J2249-3039_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2249-3039_S_2017_04_28_pus_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894563 visibilities/baseline/integration-bin. ! Found source: J2249-3039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 7568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2249-3039_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.805768Jy sigma=0.012651 ! Fit after self-cal, rms=0.773463Jy sigma=0.012568 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=9.499 mas, bpa=-8.618 degrees ! Estimated noise=1981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146276 Jy ! Component: 100 - total flux cleaned = 0.184413 Jy ! Total flux subtracted in 100 components = 0.184413 Jy ! Clean residual min=-0.036831 max=0.046620 Jy/beam ! Clean residual mean=0.000590 rms=0.014429 Jy/beam ! Combined flux in latest and established models = 0.184413 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.184413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146865Jy sigma=0.002173 ! Fit after self-cal, rms=0.146930Jy sigma=0.002173 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=9.199 mas, bpa=-7.238 degrees ! Estimated noise=1325.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247757 Jy ! Component: 100 - total flux cleaned = 0.0258954 Jy ! Component: 150 - total flux cleaned = 0.0267604 Jy ! Component: 200 - total flux cleaned = 0.0267406 Jy ! Total flux subtracted in 200 components = 0.0267406 Jy ! Clean residual min=-0.028241 max=0.029156 Jy/beam ! Clean residual mean=0.000683 rms=0.009641 Jy/beam ! Combined flux in latest and established models = 0.211154 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.211154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137358Jy sigma=0.002433 ! Fit after self-cal, rms=0.137272Jy sigma=0.002433 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.88 HN 1.06 KP 0.90 ! LA 1.07 MK 0.97 NL 0.84 OV 0.86 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.80 HN 1.10 KP 0.85 ! LA 0.99 MK 0.97 NL 0.98 OV 0.92 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.85 HN 1.03 KP 0.88 ! LA 0.97 MK 0.99 NL 0.90 OV 0.83 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.85 HN 0.98 KP 1.00* ! LA 25.83 MK 1.05 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.137272Jy sigma=0.002433 ! Fit after self-cal, rms=1.262309Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=8.912 mas, bpa=-7.117 degrees ! Estimated noise=1328.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343114 Jy ! Component: 100 - total flux cleaned = 0.00342661 Jy ! Component: 150 - total flux cleaned = 0.00332 Jy ! Component: 200 - total flux cleaned = 0.00322741 Jy ! Total flux subtracted in 200 components = 0.00322741 Jy ! Clean residual min=-0.006701 max=0.005782 Jy/beam ! Clean residual mean=-0.000038 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.214381 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.214381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.262070Jy sigma=0.000679 ! Fit after self-cal, rms=1.262520Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.262520Jy sigma=0.000675 ! Fit after self-cal, rms=0.248589Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=8.909 mas, bpa=-6.991 degrees ! Estimated noise=1330.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284163 Jy ! Component: 100 - total flux cleaned = 0.00305025 Jy ! Component: 150 - total flux cleaned = 0.0029912 Jy ! Component: 200 - total flux cleaned = 0.00293613 Jy ! Total flux subtracted in 200 components = 0.00293613 Jy ! Clean residual min=-0.005450 max=0.003887 Jy/beam ! Clean residual mean=-0.000028 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.217317 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.217317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248348Jy sigma=0.000666 ! Fit after self-cal, rms=0.248282Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114454 Jy ! Component: 100 - total flux cleaned = -0.000159939 Jy ! Component: 150 - total flux cleaned = -0.000243431 Jy ! Component: 200 - total flux cleaned = -0.000282574 Jy ! Total flux subtracted in 200 components = -0.000282574 Jy ! Clean residual min=-0.005374 max=0.003737 Jy/beam ! Clean residual mean=-0.000028 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.217035 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.217035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248263Jy sigma=0.000666 ! Fit after self-cal, rms=0.248266Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248266Jy sigma=0.000666 ! Fit after self-cal, rms=0.249456Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.87 mas, bpa=-6.851 degrees ! Estimated noise=1340.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248174 Jy ! Component: 100 - total flux cleaned = 0.00309109 Jy ! Component: 150 - total flux cleaned = 0.00301629 Jy ! Component: 200 - total flux cleaned = 0.00298338 Jy ! Total flux subtracted in 200 components = 0.00298338 Jy ! Clean residual min=-0.005233 max=0.003552 Jy/beam ! Clean residual mean=-0.000027 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.220018 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.220018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249231Jy sigma=0.000666 ! Fit after self-cal, rms=0.249227Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.0009e-05 Jy ! Component: 100 - total flux cleaned = -6.92581e-05 Jy ! Component: 150 - total flux cleaned = -9.67834e-05 Jy ! Component: 200 - total flux cleaned = -0.000147634 Jy ! Total flux subtracted in 200 components = -0.000147634 Jy ! Clean residual min=-0.005209 max=0.003578 Jy/beam ! Clean residual mean=-0.000027 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.219871 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.219871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249214Jy sigma=0.000665 ! Fit after self-cal, rms=0.249216Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249216Jy sigma=0.000665 ! Fit after self-cal, rms=0.251777Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.979 mas, bmaj=21.69 mas, bpa=1.588 degrees ! Estimated noise=1673.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277592 Jy ! Component: 100 - total flux cleaned = 0.00372397 Jy ! Component: 150 - total flux cleaned = 0.00390547 Jy ! Component: 200 - total flux cleaned = 0.00393511 Jy ! Total flux subtracted in 200 components = 0.00393511 Jy ! Clean residual min=-0.005697 max=0.004516 Jy/beam ! Clean residual mean=-0.000052 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.223806 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.223806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251605Jy sigma=0.000665 ! Fit after self-cal, rms=0.251597Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151928 Jy ! Component: 100 - total flux cleaned = 0.000152423 Jy ! Component: 150 - total flux cleaned = 0.0001525 Jy ! Component: 200 - total flux cleaned = 0.000152245 Jy ! Total flux subtracted in 200 components = 0.000152245 Jy ! Clean residual min=-0.005693 max=0.004489 Jy/beam ! Clean residual mean=-0.000053 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.223958 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.223958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251598Jy sigma=0.000666 ! Fit after self-cal, rms=0.251596Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.835 mas, bpa=-6.716 degrees ! Estimated noise=1351.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.835 at -6.716 degrees (North through East) ! Clean map min=-0.004744 max=0.20352 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=8.75 mas, bpa=-7.877 degrees ! Estimated noise=2173.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161264 Jy ! Component: 100 - total flux cleaned = 0.197524 Jy ! Component: 150 - total flux cleaned = 0.211754 Jy ! Component: 200 - total flux cleaned = 0.21749 Jy ! Total flux subtracted in 200 components = 0.21749 Jy ! Clean residual min=-0.005968 max=0.005597 Jy/beam ! Clean residual mean=0.000000 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.21749 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.21749 Jy ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.835 mas, bpa=-6.716 degrees ! Estimated noise=1351.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607528 Jy ! Component: 100 - total flux cleaned = 0.00694469 Jy ! Component: 150 - total flux cleaned = 0.00726516 Jy ! Component: 200 - total flux cleaned = 0.0073471 Jy ! Total flux subtracted in 200 components = 0.0073471 Jy ! Clean residual min=-0.005286 max=0.003991 Jy/beam ! Clean residual mean=-0.000027 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.224837 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.224837 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.979 mas, bmaj=21.69 mas, bpa=1.588 degrees ! Estimated noise=1673.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110482 Jy ! Component: 100 - total flux cleaned = 0.00126885 Jy ! Component: 150 - total flux cleaned = 0.00120002 Jy ! Component: 200 - total flux cleaned = 0.00116947 Jy ! Total flux subtracted in 200 components = 0.00116947 Jy ! Clean residual min=-0.005639 max=0.004639 Jy/beam ! Clean residual mean=-0.000053 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.226007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.13656e-05 Jy ! Component: 100 - total flux cleaned = -6.05967e-05 Jy ! Component: 150 - total flux cleaned = -8.93039e-05 Jy ! Component: 200 - total flux cleaned = -0.000114893 Jy ! Total flux subtracted in 200 components = -0.000114893 Jy ! Clean residual min=-0.005534 max=0.004635 Jy/beam ! Clean residual mean=-0.000053 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.225892 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.225892 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.835 mas, bpa=-6.716 degrees ! Estimated noise=1351.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174027 Jy ! Component: 100 - total flux cleaned = -0.000377875 Jy ! Component: 150 - total flux cleaned = -0.000434331 Jy ! Component: 200 - total flux cleaned = -0.000388999 Jy ! Total flux subtracted in 200 components = -0.000388999 Jy ! Clean residual min=-0.005213 max=0.003677 Jy/beam ! Clean residual mean=-0.000028 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.225503 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.225503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251471Jy sigma=0.000665 ! Fit after self-cal, rms=0.251477Jy sigma=0.000665 wmodel J2249-3039_S_2017_04_28_pus_map.mod ! Writing 57 model components to file: J2249-3039_S_2017_04_28_pus_map.mod wobs J2249-3039_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2249-3039_S_2017_04_28_pus_uvs.fits wwins J2249-3039_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J2249-3039_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215321 Jy ! Component: 100 - total flux cleaned = -0.00272254 Jy ! Component: 150 - total flux cleaned = -0.00272228 Jy ! Component: 200 - total flux cleaned = -0.00278123 Jy ! Component: 250 - total flux cleaned = -0.00272345 Jy ! Component: 300 - total flux cleaned = -0.00266724 Jy ! Component: 350 - total flux cleaned = -0.00266827 Jy ! Component: 400 - total flux cleaned = -0.0025652 Jy ! Component: 450 - total flux cleaned = -0.00236416 Jy ! Component: 500 - total flux cleaned = -0.00202246 Jy ! Component: 550 - total flux cleaned = -0.00183251 Jy ! Component: 600 - total flux cleaned = -0.0015542 Jy ! Component: 650 - total flux cleaned = -0.0014183 Jy ! Component: 700 - total flux cleaned = -0.00119649 Jy ! Component: 750 - total flux cleaned = -0.000806533 Jy ! Component: 800 - total flux cleaned = -0.000722245 Jy ! Component: 850 - total flux cleaned = -0.000639196 Jy ! Component: 900 - total flux cleaned = -0.000638626 Jy ! Component: 950 - total flux cleaned = -0.000518439 Jy ! Component: 1000 - total flux cleaned = -0.00043997 Jy ! Component: 1050 - total flux cleaned = -0.000439942 Jy ! Component: 1100 - total flux cleaned = -0.000401614 Jy ! Component: 1150 - total flux cleaned = -0.00032655 Jy ! Component: 1200 - total flux cleaned = -0.000179868 Jy ! Component: 1250 - total flux cleaned = -0.000252927 Jy ! Component: 1300 - total flux cleaned = -7.37539e-05 Jy ! Component: 1350 - total flux cleaned = -0.00014474 Jy ! Component: 1400 - total flux cleaned = -5.30773e-06 Jy ! Component: 1450 - total flux cleaned = -3.95717e-05 Jy ! Component: 1500 - total flux cleaned = 9.71951e-05 Jy ! Component: 1550 - total flux cleaned = 0.000197965 Jy ! Component: 1600 - total flux cleaned = 0.000264111 Jy ! Component: 1650 - total flux cleaned = 0.000231419 Jy ! Component: 1700 - total flux cleaned = 0.00029627 Jy ! Component: 1750 - total flux cleaned = 0.000328606 Jy ! Component: 1800 - total flux cleaned = 0.000328315 Jy ! Component: 1850 - total flux cleaned = 0.000453114 Jy ! Component: 1900 - total flux cleaned = 0.000452475 Jy ! Component: 1950 - total flux cleaned = 0.000360526 Jy ! Component: 2000 - total flux cleaned = 0.000482075 Jy ! Component: 2050 - total flux cleaned = 0.000482276 Jy ! Component: 2100 - total flux cleaned = 0.00051163 Jy ! Component: 2150 - total flux cleaned = 0.000570031 Jy ! Component: 2200 - total flux cleaned = 0.000598987 Jy ! Component: 2250 - total flux cleaned = 0.000656811 Jy ! Component: 2300 - total flux cleaned = 0.000769915 Jy ! Component: 2350 - total flux cleaned = 0.000826108 Jy ! Component: 2400 - total flux cleaned = 0.00102062 Jy ! Component: 2450 - total flux cleaned = 0.00102058 Jy ! Component: 2500 - total flux cleaned = 0.00110294 Jy ! Component: 2550 - total flux cleaned = 0.00123858 Jy ! Component: 2600 - total flux cleaned = 0.0013191 Jy ! Component: 2650 - total flux cleaned = 0.0014258 Jy ! Component: 2700 - total flux cleaned = 0.00153152 Jy ! Component: 2750 - total flux cleaned = 0.00161013 Jy ! Component: 2800 - total flux cleaned = 0.00166244 Jy ! Component: 2850 - total flux cleaned = 0.0017918 Jy ! Component: 2900 - total flux cleaned = 0.00181741 Jy ! Component: 2950 - total flux cleaned = 0.00184308 Jy ! Component: 3000 - total flux cleaned = 0.00186846 Jy ! Component: 3050 - total flux cleaned = 0.00191866 Jy ! Component: 3100 - total flux cleaned = 0.00196839 Jy ! Component: 3150 - total flux cleaned = 0.00201775 Jy ! Component: 3200 - total flux cleaned = 0.00199345 Jy ! Component: 3250 - total flux cleaned = 0.00206617 Jy ! Component: 3300 - total flux cleaned = 0.00206621 Jy ! Component: 3350 - total flux cleaned = 0.0020663 Jy ! Component: 3400 - total flux cleaned = 0.00209002 Jy ! Component: 3450 - total flux cleaned = 0.00211356 Jy ! Component: 3500 - total flux cleaned = 0.00206668 Jy ! Component: 3550 - total flux cleaned = 0.00206669 Jy ! Component: 3600 - total flux cleaned = 0.00195108 Jy ! Component: 3650 - total flux cleaned = 0.00199747 Jy ! Component: 3700 - total flux cleaned = 0.00195162 Jy ! Component: 3750 - total flux cleaned = 0.00192896 Jy ! Component: 3800 - total flux cleaned = 0.00195144 Jy ! Component: 3850 - total flux cleaned = 0.00186142 Jy ! Component: 3900 - total flux cleaned = 0.0018614 Jy ! Component: 3950 - total flux cleaned = 0.00179503 Jy ! Component: 4000 - total flux cleaned = 0.00181716 Jy ! Component: 4050 - total flux cleaned = 0.00179522 Jy ! Total flux subtracted in 4096 components = 0.00179507 Jy ! Clean residual min=-0.001326 max=0.001387 Jy/beam ! Clean residual mean=-0.000006 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.227298 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 308 components and 0.227298 Jy ![Exited script file: muppet] wmap "J2249-3039_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.835 at -6.716 degrees (North through East) ! Clean map min=-0.003719 max=0.20343 Jy/beam ! Writing clean map to FITS file: J2249-3039_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.203428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000390183 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.575412 0.575412 1.15082 2.30165 4.6033 9.2066 18.4132 36.8264 73.6528 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.203 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.835 at -6.716 degrees (North through East) ! Clean map min=-0.003719 max=0.20343 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2249-3039_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:34:57 2019