! Started logfile: J2249-1251_S_2017_02_24_pus_uvs.log on Sat May 4 11:37:17 2019 obs J2249-1251_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2249-1251_S_2017_02_24_pus_uva.fits ! AN table 1: 161 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.695376 visibilities/baseline/integration-bin. ! Found source: J2249-1251 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 20152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2249-1251_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 832 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912518Jy sigma=0.006655 ! Fit after self-cal, rms=0.884573Jy sigma=0.006474 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.674 mas, bpa=-6.922 degrees ! Estimated noise=1052.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883664 Jy ! Component: 100 - total flux cleaned = 0.10815 Jy ! Total flux subtracted in 100 components = 0.10815 Jy ! Clean residual min=-0.004491 max=0.007138 Jy/beam ! Clean residual mean=0.000006 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.10815 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.10815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099721Jy sigma=0.000706 ! Fit after self-cal, rms=0.099719Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=7.949 mas, bpa=-4.715 degrees ! Estimated noise=740.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015649 Jy ! Component: 100 - total flux cleaned = 0.0241473 Jy ! Component: 150 - total flux cleaned = 0.0291809 Jy ! Component: 200 - total flux cleaned = 0.0322138 Jy ! Total flux subtracted in 200 components = 0.0322138 Jy ! Clean residual min=-0.005062 max=0.008580 Jy/beam ! Clean residual mean=0.000001 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 0.140363 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 51 components and 0.140363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097495Jy sigma=0.000686 ! Fit after self-cal, rms=0.097498Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.14 KP 0.94 ! LA 0.92 MK 0.98 NL 1.24 OV 1.06 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.90 HN 1.10 KP 0.90 ! LA 0.90 MK 0.98 NL 1.15 OV 1.12 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.94 HN 1.03 KP 0.95 ! LA 0.96 MK 1.01 NL 1.28 OV 1.01 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.95 HN 1.02 KP 1.00* ! LA 0.88 MK 1.10 NL 1.00* OV 1.10 ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.097498Jy sigma=0.000686 ! Fit after self-cal, rms=0.100608Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=8.077 mas, bpa=-4.65 degrees ! Estimated noise=743.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160488 Jy ! Component: 100 - total flux cleaned = -0.000143255 Jy ! Component: 150 - total flux cleaned = -0.000157191 Jy ! Component: 200 - total flux cleaned = -0.00017068 Jy ! Total flux subtracted in 200 components = -0.00017068 Jy ! Clean residual min=-0.003840 max=0.005787 Jy/beam ! Clean residual mean=0.000004 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.140193 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.140193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100599Jy sigma=0.000676 ! Fit after self-cal, rms=0.100819Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100819Jy sigma=0.000676 ! Fit after self-cal, rms=0.101430Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.104 mas, bpa=-4.613 degrees ! Estimated noise=744.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118445 Jy ! Component: 100 - total flux cleaned = -0.000183062 Jy ! Component: 150 - total flux cleaned = -0.000212034 Jy ! Component: 200 - total flux cleaned = -0.000254045 Jy ! Total flux subtracted in 200 components = -0.000254045 Jy ! Clean residual min=-0.003781 max=0.005613 Jy/beam ! Clean residual mean=0.000002 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.139939 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.139939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101422Jy sigma=0.000675 ! Fit after self-cal, rms=0.101453Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534964 Jy ! Component: 100 - total flux cleaned = 0.00824064 Jy ! Component: 150 - total flux cleaned = 0.00992259 Jy ! Component: 200 - total flux cleaned = 0.0102121 Jy ! Total flux subtracted in 200 components = 0.0102121 Jy ! Clean residual min=-0.003079 max=0.005000 Jy/beam ! Clean residual mean=0.000002 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.150151 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 0.150151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101189Jy sigma=0.000672 ! Fit after self-cal, rms=0.101118Jy sigma=0.000672 ! Inverting map ! Added new window around map position (16, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386794 Jy ! Component: 100 - total flux cleaned = 0.00593267 Jy ! Component: 150 - total flux cleaned = 0.00660831 Jy ! Component: 200 - total flux cleaned = 0.00696735 Jy ! Total flux subtracted in 200 components = 0.00696735 Jy ! Clean residual min=-0.002751 max=0.003553 Jy/beam ! Clean residual mean=0.000002 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.157118 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 128 components and 0.157118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100937Jy sigma=0.000670 ! Fit after self-cal, rms=0.100918Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100918Jy sigma=0.000670 ! Fit after self-cal, rms=0.098963Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.072 mas, bpa=-4.719 degrees ! Estimated noise=741.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213871 Jy ! Component: 100 - total flux cleaned = 0.00358409 Jy ! Component: 150 - total flux cleaned = 0.00407329 Jy ! Component: 200 - total flux cleaned = 0.00407289 Jy ! Total flux subtracted in 200 components = 0.00407289 Jy ! Clean residual min=-0.002590 max=0.003421 Jy/beam ! Clean residual mean=0.000001 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.161191 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 160 components and 0.161191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098902Jy sigma=0.000669 ! Fit after self-cal, rms=0.098864Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334543 Jy ! Component: 100 - total flux cleaned = 0.00478427 Jy ! Component: 150 - total flux cleaned = 0.00569567 Jy ! Component: 200 - total flux cleaned = 0.0062336 Jy ! Total flux subtracted in 200 components = 0.0062336 Jy ! Clean residual min=-0.002306 max=0.002645 Jy/beam ! Clean residual mean=0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.167425 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 190 components and 0.167425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098742Jy sigma=0.000668 ! Fit after self-cal, rms=0.098720Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098720Jy sigma=0.000668 ! Fit after self-cal, rms=0.098293Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.711 mas, bmaj=14.94 mas, bpa=0.9921 degrees ! Estimated noise=930.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275593 Jy ! Component: 100 - total flux cleaned = 0.0034549 Jy ! Component: 150 - total flux cleaned = 0.00381766 Jy ! Component: 200 - total flux cleaned = 0.00376777 Jy ! Total flux subtracted in 200 components = 0.00376777 Jy ! Clean residual min=-0.003216 max=0.003877 Jy/beam ! Clean residual mean=0.000002 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.171192 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 226 components and 0.171192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098252Jy sigma=0.000667 ! Fit after self-cal, rms=0.098235Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478278 Jy ! Component: 100 - total flux cleaned = 0.000302348 Jy ! Component: 150 - total flux cleaned = 0.000144318 Jy ! Component: 200 - total flux cleaned = 3.47494e-05 Jy ! Total flux subtracted in 200 components = 3.47494e-05 Jy ! Clean residual min=-0.003049 max=0.003841 Jy/beam ! Clean residual mean=0.000002 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.171227 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 241 components and 0.171227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098225Jy sigma=0.000667 ! Fit after self-cal, rms=0.098227Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=8.06 mas, bpa=-4.755 degrees ! Estimated noise=741.831 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 8.06 at -4.755 degrees (North through East) ! Clean map min=-0.0022639 max=0.11629 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.513 mas, bmaj=6.734 mas, bpa=-6.714 degrees ! Estimated noise=1072.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896323 Jy ! Component: 100 - total flux cleaned = 0.109882 Jy ! Component: 150 - total flux cleaned = 0.118695 Jy ! Component: 200 - total flux cleaned = 0.125106 Jy ! Total flux subtracted in 200 components = 0.125106 Jy ! Clean residual min=-0.003615 max=0.004276 Jy/beam ! Clean residual mean=0.000005 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.125106 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.125106 Jy ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=8.06 mas, bpa=-4.755 degrees ! Estimated noise=741.831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967514 Jy ! Component: 100 - total flux cleaned = 0.0161467 Jy ! Component: 150 - total flux cleaned = 0.0212519 Jy ! Component: 200 - total flux cleaned = 0.0254739 Jy ! Total flux subtracted in 200 components = 0.0254739 Jy ! Clean residual min=-0.003490 max=0.003916 Jy/beam ! Clean residual mean=0.000003 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.15058 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 106 components and 0.15058 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.711 mas, bmaj=14.94 mas, bpa=0.9921 degrees ! Estimated noise=930.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619795 Jy ! Component: 100 - total flux cleaned = 0.0104297 Jy ! Component: 150 - total flux cleaned = 0.0135652 Jy ! Component: 200 - total flux cleaned = 0.0158723 Jy ! Total flux subtracted in 200 components = 0.0158723 Jy ! Clean residual min=-0.004033 max=0.003829 Jy/beam ! Clean residual mean=0.000004 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.166452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100088 Jy ! Component: 100 - total flux cleaned = 0.00146019 Jy ! Component: 150 - total flux cleaned = 0.00185434 Jy ! Component: 200 - total flux cleaned = 0.0021001 Jy ! Total flux subtracted in 200 components = 0.0021001 Jy ! Clean residual min=-0.003530 max=0.003858 Jy/beam ! Clean residual mean=0.000003 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.168552 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 186 components and 0.168552 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=8.06 mas, bpa=-4.755 degrees ! Estimated noise=741.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885036 Jy ! Component: 100 - total flux cleaned = 0.00138202 Jy ! Component: 150 - total flux cleaned = 0.00173409 Jy ! Component: 200 - total flux cleaned = 0.00185732 Jy ! Total flux subtracted in 200 components = 0.00185732 Jy ! Clean residual min=-0.002502 max=0.002633 Jy/beam ! Clean residual mean=0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.17041 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 210 components and 0.17041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098261Jy sigma=0.000667 ! Fit after self-cal, rms=0.098261Jy sigma=0.000667 wmodel J2249-1251_S_2017_02_24_pus_map.mod ! Writing 210 model components to file: J2249-1251_S_2017_02_24_pus_map.mod wobs J2249-1251_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2249-1251_S_2017_02_24_pus_uvs.fits wwins J2249-1251_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J2249-1251_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661955 Jy ! Component: 100 - total flux cleaned = 0.00137891 Jy ! Component: 150 - total flux cleaned = 0.00177579 Jy ! Component: 200 - total flux cleaned = 0.00192616 Jy ! Component: 250 - total flux cleaned = 0.00199895 Jy ! Component: 300 - total flux cleaned = 0.0021744 Jy ! Component: 350 - total flux cleaned = 0.0022421 Jy ! Component: 400 - total flux cleaned = 0.00220905 Jy ! Component: 450 - total flux cleaned = 0.00230688 Jy ! Component: 500 - total flux cleaned = 0.0024012 Jy ! Component: 550 - total flux cleaned = 0.00249383 Jy ! Component: 600 - total flux cleaned = 0.00264485 Jy ! Component: 650 - total flux cleaned = 0.00270333 Jy ! Component: 700 - total flux cleaned = 0.00267368 Jy ! Component: 750 - total flux cleaned = 0.00270158 Jy ! Component: 800 - total flux cleaned = 0.00272944 Jy ! Component: 850 - total flux cleaned = 0.0027291 Jy ! Component: 900 - total flux cleaned = 0.00264844 Jy ! Component: 950 - total flux cleaned = 0.00267502 Jy ! Component: 1000 - total flux cleaned = 0.00270127 Jy ! Component: 1050 - total flux cleaned = 0.00275228 Jy ! Component: 1100 - total flux cleaned = 0.00272645 Jy ! Component: 1150 - total flux cleaned = 0.00272617 Jy ! Component: 1200 - total flux cleaned = 0.00277506 Jy ! Component: 1250 - total flux cleaned = 0.00277511 Jy ! Component: 1300 - total flux cleaned = 0.00284673 Jy ! Component: 1350 - total flux cleaned = 0.00294015 Jy ! Component: 1400 - total flux cleaned = 0.00298629 Jy ! Component: 1450 - total flux cleaned = 0.00310004 Jy ! Component: 1500 - total flux cleaned = 0.00314488 Jy ! Component: 1550 - total flux cleaned = 0.0032341 Jy ! Component: 1600 - total flux cleaned = 0.00334397 Jy ! Component: 1650 - total flux cleaned = 0.00336558 Jy ! Component: 1700 - total flux cleaned = 0.00336567 Jy ! Component: 1750 - total flux cleaned = 0.00340823 Jy ! Component: 1800 - total flux cleaned = 0.00347111 Jy ! Component: 1850 - total flux cleaned = 0.00357497 Jy ! Component: 1900 - total flux cleaned = 0.0036161 Jy ! Component: 1950 - total flux cleaned = 0.0037382 Jy ! Component: 2000 - total flux cleaned = 0.00375789 Jy ! Component: 2050 - total flux cleaned = 0.00377824 Jy ! Component: 2100 - total flux cleaned = 0.00389716 Jy ! Component: 2150 - total flux cleaned = 0.00395596 Jy ! Component: 2200 - total flux cleaned = 0.00399479 Jy ! Component: 2250 - total flux cleaned = 0.00399488 Jy ! Component: 2300 - total flux cleaned = 0.00405224 Jy ! Component: 2350 - total flux cleaned = 0.00409013 Jy ! Component: 2400 - total flux cleaned = 0.00407137 Jy ! Component: 2450 - total flux cleaned = 0.00410913 Jy ! Component: 2500 - total flux cleaned = 0.00422031 Jy ! Component: 2550 - total flux cleaned = 0.00420194 Jy ! Component: 2600 - total flux cleaned = 0.00429332 Jy ! Component: 2650 - total flux cleaned = 0.00423865 Jy ! Component: 2700 - total flux cleaned = 0.00432865 Jy ! Component: 2750 - total flux cleaned = 0.00427509 Jy ! Component: 2800 - total flux cleaned = 0.00436348 Jy ! Component: 2850 - total flux cleaned = 0.00432838 Jy ! Component: 2900 - total flux cleaned = 0.00436296 Jy ! Component: 2950 - total flux cleaned = 0.0043631 Jy ! Component: 3000 - total flux cleaned = 0.00436315 Jy ! Component: 3050 - total flux cleaned = 0.00438034 Jy ! Component: 3100 - total flux cleaned = 0.00434644 Jy ! Component: 3150 - total flux cleaned = 0.00434642 Jy ! Component: 3200 - total flux cleaned = 0.00436333 Jy ! Component: 3250 - total flux cleaned = 0.0043135 Jy ! Component: 3300 - total flux cleaned = 0.00433022 Jy ! Component: 3350 - total flux cleaned = 0.00429742 Jy ! Component: 3400 - total flux cleaned = 0.00429713 Jy ! Component: 3450 - total flux cleaned = 0.00424857 Jy ! Component: 3500 - total flux cleaned = 0.00426477 Jy ! Component: 3550 - total flux cleaned = 0.00421678 Jy ! Component: 3600 - total flux cleaned = 0.00426452 Jy ! Component: 3650 - total flux cleaned = 0.00420129 Jy ! Component: 3700 - total flux cleaned = 0.00417 Jy ! Component: 3750 - total flux cleaned = 0.00415437 Jy ! Component: 3800 - total flux cleaned = 0.00412315 Jy ! Component: 3850 - total flux cleaned = 0.00406161 Jy ! Component: 3900 - total flux cleaned = 0.00406146 Jy ! Component: 3950 - total flux cleaned = 0.0040159 Jy ! Component: 4000 - total flux cleaned = 0.00392524 Jy ! Component: 4050 - total flux cleaned = 0.00398534 Jy ! Total flux subtracted in 4096 components = 0.003866 Jy ! Clean residual min=-0.000961 max=0.000874 Jy/beam ! Clean residual mean=0.000001 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.174276 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 522 components and 0.174276 Jy ![Exited script file: muppet] wmap "J2249-1251_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 8.06 at -4.755 degrees (North through East) ! Clean map min=-0.0018032 max=0.11704 Jy/beam ! Writing clean map to FITS file: J2249-1251_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000278823 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714683 0.714683 1.42937 2.85873 5.71746 11.4349 22.8698 45.7397 91.4794 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 8.06 at -4.755 degrees (North through East) ! Clean map min=-0.0018032 max=0.11704 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2249-1251_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:37:23 2019