! Started logfile: J2248-3235_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:57:57 2019 obs J2248-3235_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J2248-3235_S_2017_05_31_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.446377 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2248-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2248-3235_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.644297Jy sigma=0.004212 ! Fit after self-cal, rms=0.630311Jy sigma=0.004120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=33.59 mas, bpa=-30.14 degrees ! Estimated noise=4809.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.37193 Jy ! Component: 100 - total flux cleaned = 0.476993 Jy ! Total flux subtracted in 100 components = 0.476993 Jy ! Clean residual min=-0.052424 max=0.048721 Jy/beam ! Clean residual mean=0.000013 rms=0.015168 Jy/beam ! Combined flux in latest and established models = 0.476992 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.476992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.485402Jy sigma=0.000882 ! Fit after self-cal, rms=0.485381Jy sigma=0.000882 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.579 mas, bmaj=32.14 mas, bpa=-29.79 degrees ! Estimated noise=2777.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582204 Jy ! Component: 100 - total flux cleaned = 0.00264318 Jy ! Component: 150 - total flux cleaned = -0.0014092 Jy ! Component: 200 - total flux cleaned = -0.00522451 Jy ! Total flux subtracted in 200 components = -0.00522451 Jy ! Clean residual min=-0.029630 max=0.022592 Jy/beam ! Clean residual mean=-0.000011 rms=0.008221 Jy/beam ! Combined flux in latest and established models = 0.471768 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.471768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.463902Jy sigma=0.000869 ! Fit after self-cal, rms=0.463859Jy sigma=0.000869 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.29 FD 0.99 HN 1.00* KP 1.02 ! LA 1.01 MK 0.97 NL 1.00* OV 1.03 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.98 ! LA 0.98 MK 0.98 NL 1.00* OV 1.06 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.99 ! LA 1.01 MK 0.99 NL 1.00* OV 0.99 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.94 ! LA 1.02 MK 1.09 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.463859Jy sigma=0.000869 ! Fit after self-cal, rms=0.099023Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=30.52 mas, bpa=-29.94 degrees ! Estimated noise=2717.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191936 Jy ! Component: 100 - total flux cleaned = 0.00340164 Jy ! Component: 150 - total flux cleaned = 0.00351712 Jy ! Component: 200 - total flux cleaned = 0.00332158 Jy ! Total flux subtracted in 200 components = 0.00332158 Jy ! Clean residual min=-0.006289 max=0.009112 Jy/beam ! Clean residual mean=0.000022 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.475089 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.475089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098611Jy sigma=0.000650 ! Fit after self-cal, rms=0.098046Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098046Jy sigma=0.000649 ! Fit after self-cal, rms=0.097859Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=30.46 mas, bpa=-29.95 degrees ! Estimated noise=2723.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243099 Jy ! Component: 100 - total flux cleaned = 0.00314653 Jy ! Component: 150 - total flux cleaned = 0.00300076 Jy ! Component: 200 - total flux cleaned = 0.00293448 Jy ! Total flux subtracted in 200 components = 0.00293448 Jy ! Clean residual min=-0.006029 max=0.007857 Jy/beam ! Clean residual mean=0.000027 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.478024 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.478024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097706Jy sigma=0.000648 ! Fit after self-cal, rms=0.097705Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.56633e-05 Jy ! Component: 100 - total flux cleaned = -6.63425e-05 Jy ! Component: 150 - total flux cleaned = -1.33504e-05 Jy ! Component: 200 - total flux cleaned = 3.71939e-05 Jy ! Total flux subtracted in 200 components = 3.71939e-05 Jy ! Clean residual min=-0.005942 max=0.007481 Jy/beam ! Clean residual mean=0.000027 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.478061 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.478061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097637Jy sigma=0.000647 ! Fit after self-cal, rms=0.097641Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097641Jy sigma=0.000647 ! Fit after self-cal, rms=0.097547Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=30.42 mas, bpa=-29.95 degrees ! Estimated noise=2728.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197236 Jy ! Component: 100 - total flux cleaned = 0.00236775 Jy ! Component: 150 - total flux cleaned = 0.00271949 Jy ! Component: 200 - total flux cleaned = 0.00281632 Jy ! Total flux subtracted in 200 components = 0.00281632 Jy ! Clean residual min=-0.005771 max=0.006897 Jy/beam ! Clean residual mean=0.000033 rms=0.001990 Jy/beam ! Combined flux in latest and established models = 0.480877 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.480878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097481Jy sigma=0.000647 ! Fit after self-cal, rms=0.097482Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143635 Jy ! Component: 100 - total flux cleaned = 0.000278684 Jy ! Component: 150 - total flux cleaned = 0.000407466 Jy ! Component: 200 - total flux cleaned = 0.000490725 Jy ! Total flux subtracted in 200 components = 0.000490725 Jy ! Clean residual min=-0.005683 max=0.006763 Jy/beam ! Clean residual mean=0.000033 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.481368 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.481368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097443Jy sigma=0.000647 ! Fit after self-cal, rms=0.097446Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097446Jy sigma=0.000647 ! Fit after self-cal, rms=0.097393Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.36 mas, bmaj=34.41 mas, bpa=-14.99 degrees ! Estimated noise=3256.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224657 Jy ! Component: 100 - total flux cleaned = 0.00281373 Jy ! Component: 150 - total flux cleaned = 0.00315287 Jy ! Component: 200 - total flux cleaned = 0.00341347 Jy ! Total flux subtracted in 200 components = 0.00341347 Jy ! Clean residual min=-0.006315 max=0.008062 Jy/beam ! Clean residual mean=0.000046 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.484782 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.484782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097345Jy sigma=0.000646 ! Fit after self-cal, rms=0.097344Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214609 Jy ! Component: 100 - total flux cleaned = 0.000214838 Jy ! Component: 150 - total flux cleaned = 0.000259301 Jy ! Component: 200 - total flux cleaned = 0.000343136 Jy ! Total flux subtracted in 200 components = 0.000343136 Jy ! Clean residual min=-0.006220 max=0.007889 Jy/beam ! Clean residual mean=0.000046 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 0.485125 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.485125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097318Jy sigma=0.000646 ! Fit after self-cal, rms=0.097321Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=30.4 mas, bpa=-29.95 degrees ! Estimated noise=2733.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.602 x 30.4 at -29.95 degrees (North through East) ! Clean map min=-0.018161 max=0.47608 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=30.12 mas, bpa=-30.31 degrees ! Estimated noise=4502.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34793 Jy ! Component: 100 - total flux cleaned = 0.435308 Jy ! Component: 150 - total flux cleaned = 0.473686 Jy ! Component: 200 - total flux cleaned = 0.491245 Jy ! Total flux subtracted in 200 components = 0.491245 Jy ! Clean residual min=-0.008618 max=0.009638 Jy/beam ! Clean residual mean=0.000031 rms=0.002893 Jy/beam ! Combined flux in latest and established models = 0.491245 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.491245 Jy ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=30.4 mas, bpa=-29.95 degrees ! Estimated noise=2733.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377191 Jy ! Component: 100 - total flux cleaned = 0.00498176 Jy ! Component: 150 - total flux cleaned = 0.00530113 Jy ! Component: 200 - total flux cleaned = 0.00491237 Jy ! Total flux subtracted in 200 components = 0.00491237 Jy ! Clean residual min=-0.006194 max=0.006371 Jy/beam ! Clean residual mean=0.000037 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.496158 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.496157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.36 mas, bmaj=34.41 mas, bpa=-14.99 degrees ! Estimated noise=3256.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010777 Jy ! Component: 100 - total flux cleaned = 0.000714631 Jy ! Component: 150 - total flux cleaned = 0.000386922 Jy ! Component: 200 - total flux cleaned = -3.79351e-06 Jy ! Total flux subtracted in 200 components = -3.79351e-06 Jy ! Clean residual min=-0.005318 max=0.007483 Jy/beam ! Clean residual mean=0.000055 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.496154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438915 Jy ! Component: 100 - total flux cleaned = -0.000928248 Jy ! Component: 150 - total flux cleaned = -0.00146257 Jy ! Component: 200 - total flux cleaned = -0.00189169 Jy ! Total flux subtracted in 200 components = -0.00189169 Jy ! Clean residual min=-0.005480 max=0.007355 Jy/beam ! Clean residual mean=0.000053 rms=0.002269 Jy/beam ! Combined flux in latest and established models = 0.494262 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 64 components and 0.494262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=30.4 mas, bpa=-29.95 degrees ! Estimated noise=2733.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117759 Jy ! Component: 100 - total flux cleaned = -0.00173295 Jy ! Component: 150 - total flux cleaned = -0.00209307 Jy ! Component: 200 - total flux cleaned = -0.00242479 Jy ! Total flux subtracted in 200 components = -0.00242479 Jy ! Clean residual min=-0.005049 max=0.006452 Jy/beam ! Clean residual mean=0.000036 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.491837 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.491837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097686Jy sigma=0.000647 ! Fit after self-cal, rms=0.097716Jy sigma=0.000647 wmodel J2248-3235_S_2017_05_31_pus_map.mod ! Writing 89 model components to file: J2248-3235_S_2017_05_31_pus_map.mod wobs J2248-3235_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J2248-3235_S_2017_05_31_pus_uvs.fits wwins J2248-3235_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J2248-3235_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275136 Jy ! Component: 100 - total flux cleaned = 0.00413984 Jy ! Component: 150 - total flux cleaned = 0.00422583 Jy ! Component: 200 - total flux cleaned = 0.00450584 Jy ! Component: 250 - total flux cleaned = 0.00488715 Jy ! Component: 300 - total flux cleaned = 0.00530646 Jy ! Component: 350 - total flux cleaned = 0.00558773 Jy ! Component: 400 - total flux cleaned = 0.00558651 Jy ! Component: 450 - total flux cleaned = 0.00558573 Jy ! Component: 500 - total flux cleaned = 0.00563508 Jy ! Component: 550 - total flux cleaned = 0.00563604 Jy ! Component: 600 - total flux cleaned = 0.00559052 Jy ! Component: 650 - total flux cleaned = 0.00572193 Jy ! Component: 700 - total flux cleaned = 0.00585004 Jy ! Component: 750 - total flux cleaned = 0.00601591 Jy ! Component: 800 - total flux cleaned = 0.00609657 Jy ! Component: 850 - total flux cleaned = 0.00621466 Jy ! Component: 900 - total flux cleaned = 0.00621524 Jy ! Component: 950 - total flux cleaned = 0.00636668 Jy ! Component: 1000 - total flux cleaned = 0.00644052 Jy ! Component: 1050 - total flux cleaned = 0.00658621 Jy ! Component: 1100 - total flux cleaned = 0.00665733 Jy ! Component: 1150 - total flux cleaned = 0.00669246 Jy ! Component: 1200 - total flux cleaned = 0.00686635 Jy ! Component: 1250 - total flux cleaned = 0.00686614 Jy ! Component: 1300 - total flux cleaned = 0.00686632 Jy ! Component: 1350 - total flux cleaned = 0.00689963 Jy ! Component: 1400 - total flux cleaned = 0.00693205 Jy ! Component: 1450 - total flux cleaned = 0.00683472 Jy ! Component: 1500 - total flux cleaned = 0.00680314 Jy ! Component: 1550 - total flux cleaned = 0.00674072 Jy ! Component: 1600 - total flux cleaned = 0.00671023 Jy ! Component: 1650 - total flux cleaned = 0.00667912 Jy ! Component: 1700 - total flux cleaned = 0.00652581 Jy ! Component: 1750 - total flux cleaned = 0.00637496 Jy ! Component: 1800 - total flux cleaned = 0.00631519 Jy ! Component: 1850 - total flux cleaned = 0.00616629 Jy ! Component: 1900 - total flux cleaned = 0.00601884 Jy ! Component: 1950 - total flux cleaned = 0.00584366 Jy ! Component: 2000 - total flux cleaned = 0.00578574 Jy ! Component: 2050 - total flux cleaned = 0.00561296 Jy ! Component: 2100 - total flux cleaned = 0.00547024 Jy ! Component: 2150 - total flux cleaned = 0.00538517 Jy ! Component: 2200 - total flux cleaned = 0.00524388 Jy ! Component: 2250 - total flux cleaned = 0.00518777 Jy ! Component: 2300 - total flux cleaned = 0.0050476 Jy ! Component: 2350 - total flux cleaned = 0.00496388 Jy ! Component: 2400 - total flux cleaned = 0.00482429 Jy ! Component: 2450 - total flux cleaned = 0.00471291 Jy ! Component: 2500 - total flux cleaned = 0.00462964 Jy ! Component: 2550 - total flux cleaned = 0.00449072 Jy ! Component: 2600 - total flux cleaned = 0.00440754 Jy ! Component: 2650 - total flux cleaned = 0.00432434 Jy ! Component: 2700 - total flux cleaned = 0.00418573 Jy ! Component: 2750 - total flux cleaned = 0.00407486 Jy ! Component: 2800 - total flux cleaned = 0.00399151 Jy ! Component: 2850 - total flux cleaned = 0.00390824 Jy ! Component: 2900 - total flux cleaned = 0.00382492 Jy ! Component: 2950 - total flux cleaned = 0.00374156 Jy ! Component: 3000 - total flux cleaned = 0.00371347 Jy ! Component: 3050 - total flux cleaned = 0.00368534 Jy ! Component: 3100 - total flux cleaned = 0.00362904 Jy ! Component: 3150 - total flux cleaned = 0.00360054 Jy ! Component: 3200 - total flux cleaned = 0.0035721 Jy ! Component: 3250 - total flux cleaned = 0.00351425 Jy ! Component: 3300 - total flux cleaned = 0.00351447 Jy ! Component: 3350 - total flux cleaned = 0.00345579 Jy ! Component: 3400 - total flux cleaned = 0.00345579 Jy ! Component: 3450 - total flux cleaned = 0.00345588 Jy ! Component: 3500 - total flux cleaned = 0.00348619 Jy ! Component: 3550 - total flux cleaned = 0.00348643 Jy ! Component: 3600 - total flux cleaned = 0.00348634 Jy ! Component: 3650 - total flux cleaned = 0.00345526 Jy ! Component: 3700 - total flux cleaned = 0.00345543 Jy ! Component: 3750 - total flux cleaned = 0.00342381 Jy ! Component: 3800 - total flux cleaned = 0.00339144 Jy ! Component: 3850 - total flux cleaned = 0.00339162 Jy ! Component: 3900 - total flux cleaned = 0.00339168 Jy ! Component: 3950 - total flux cleaned = 0.00335821 Jy ! Component: 4000 - total flux cleaned = 0.00335812 Jy ! Component: 4050 - total flux cleaned = 0.00328955 Jy ! Total flux subtracted in 4096 components = 0.00328955 Jy ! Clean residual min=-0.001794 max=0.001892 Jy/beam ! Clean residual mean=-0.000003 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.495127 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 357 components and 0.495127 Jy ![Exited script file: muppet] wmap "J2248-3235_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.602 x 30.4 at -29.95 degrees (North through East) ! Clean map min=-0.0063355 max=0.461 Jy/beam ! Writing clean map to FITS file: J2248-3235_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.460998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701815 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.456714 0.456714 0.913429 1.82686 3.65371 7.30743 14.6149 29.2297 58.4594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.46 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.602 x 30.4 at -29.95 degrees (North through East) ! Clean map min=-0.0063355 max=0.461 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2248-3235_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:58:01 2019