! Started logfile: J2248-3235_S_2017_05_01_pus_uvs.log on Wed May 1 18:45:08 2019 obs J2248-3235_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2248-3235_S_2017_05_01_pus_uva.fits ! AN table 1: 25 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.318222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2248-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2248-3235_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.606203Jy sigma=0.002970 ! Fit after self-cal, rms=0.595649Jy sigma=0.002918 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.134 mas, bpa=13.09 degrees ! Estimated noise=5117.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.328915 Jy ! Component: 100 - total flux cleaned = 0.416568 Jy ! Total flux subtracted in 100 components = 0.416568 Jy ! Clean residual min=-0.024153 max=0.039226 Jy/beam ! Clean residual mean=-0.000472 rms=0.008417 Jy/beam ! Combined flux in latest and established models = 0.416568 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.416568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163768Jy sigma=0.000786 ! Fit after self-cal, rms=0.163867Jy sigma=0.000786 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.205 mas, bpa=14.05 degrees ! Estimated noise=4227.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0496017 Jy ! Component: 100 - total flux cleaned = 0.0731905 Jy ! Component: 150 - total flux cleaned = 0.0859279 Jy ! Component: 200 - total flux cleaned = 0.0929167 Jy ! Total flux subtracted in 200 components = 0.0929167 Jy ! Clean residual min=-0.018336 max=0.026819 Jy/beam ! Clean residual mean=-0.000404 rms=0.006122 Jy/beam ! Combined flux in latest and established models = 0.509485 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.509485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151811Jy sigma=0.000693 ! Fit after self-cal, rms=0.151892Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 1.00* KP 1.00* ! LA 0.94 MK 0.93 NL 1.01 OV 1.00 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.00* KP 1.00* ! LA 0.91 MK 1.00 NL 1.18 OV 1.02 ! PT 0.96 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.00* KP 1.00* ! LA 0.96 MK 1.05 NL 1.41 OV 0.96 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.08 HN 1.00* KP 1.00* ! LA 1.00* MK 1.07 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.151892Jy sigma=0.000692 ! Fit after self-cal, rms=0.148718Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=8.229 mas, bpa=14.29 degrees ! Estimated noise=4220.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183142 Jy ! Component: 100 - total flux cleaned = -0.0023328 Jy ! Component: 150 - total flux cleaned = -0.00266003 Jy ! Component: 200 - total flux cleaned = -0.00276318 Jy ! Total flux subtracted in 200 components = -0.00276318 Jy ! Clean residual min=-0.008908 max=0.012825 Jy/beam ! Clean residual mean=-0.000099 rms=0.002727 Jy/beam ! Combined flux in latest and established models = 0.506722 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.506722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148417Jy sigma=0.000637 ! Fit after self-cal, rms=0.148649Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148649Jy sigma=0.000637 ! Fit after self-cal, rms=0.149344Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.248 mas, bpa=14.41 degrees ! Estimated noise=4223.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000642663 Jy ! Component: 100 - total flux cleaned = -0.0010071 Jy ! Component: 150 - total flux cleaned = -0.00124718 Jy ! Component: 200 - total flux cleaned = -0.00124357 Jy ! Total flux subtracted in 200 components = -0.00124357 Jy ! Clean residual min=-0.008859 max=0.012422 Jy/beam ! Clean residual mean=-0.000093 rms=0.002703 Jy/beam ! Combined flux in latest and established models = 0.505478 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.505478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149185Jy sigma=0.000637 ! Fit after self-cal, rms=0.149189Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951925 Jy ! Component: 100 - total flux cleaned = 0.009157 Jy ! Component: 150 - total flux cleaned = 0.0095539 Jy ! Component: 200 - total flux cleaned = 0.00987679 Jy ! Total flux subtracted in 200 components = 0.00987679 Jy ! Clean residual min=-0.008555 max=0.010570 Jy/beam ! Clean residual mean=-0.000040 rms=0.002287 Jy/beam ! Combined flux in latest and established models = 0.515355 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.515355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148356Jy sigma=0.000633 ! Fit after self-cal, rms=0.148308Jy sigma=0.000633 ! Inverting map ! Added new window around map position (-63, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804083 Jy ! Component: 100 - total flux cleaned = 0.0081539 Jy ! Component: 150 - total flux cleaned = 0.00853094 Jy ! Component: 200 - total flux cleaned = 0.00885967 Jy ! Total flux subtracted in 200 components = 0.00885967 Jy ! Clean residual min=-0.008370 max=0.008424 Jy/beam ! Clean residual mean=-0.000036 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 0.524215 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.524214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147669Jy sigma=0.000630 ! Fit after self-cal, rms=0.147639Jy sigma=0.000630 ! Inverting map ! Added new window around map position (91.5, -116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032991 Jy ! Component: 100 - total flux cleaned = 0.00330242 Jy ! Component: 150 - total flux cleaned = 0.00403575 Jy ! Component: 200 - total flux cleaned = 0.00479429 Jy ! Total flux subtracted in 200 components = 0.00479429 Jy ! Clean residual min=-0.008290 max=0.007343 Jy/beam ! Clean residual mean=-0.000037 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.529009 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.529009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147004Jy sigma=0.000628 ! Fit after self-cal, rms=0.147002Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147002Jy sigma=0.000628 ! Fit after self-cal, rms=0.146356Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=8.258 mas, bpa=14.44 degrees ! Estimated noise=4209.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839793 Jy ! Component: 100 - total flux cleaned = 0.000840783 Jy ! Component: 150 - total flux cleaned = 0.000948444 Jy ! Component: 200 - total flux cleaned = 0.00104723 Jy ! Total flux subtracted in 200 components = 0.00104723 Jy ! Clean residual min=-0.007556 max=0.006851 Jy/beam ! Clean residual mean=-0.000049 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.530056 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.530056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146155Jy sigma=0.000627 ! Fit after self-cal, rms=0.146147Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.80089e-06 Jy ! Component: 100 - total flux cleaned = -8.94363e-05 Jy ! Component: 150 - total flux cleaned = -8.77392e-05 Jy ! Component: 200 - total flux cleaned = -8.90932e-05 Jy ! Total flux subtracted in 200 components = -8.90932e-05 Jy ! Clean residual min=-0.007323 max=0.006846 Jy/beam ! Clean residual mean=-0.000046 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.529967 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 125 components and 0.529967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146030Jy sigma=0.000626 ! Fit after self-cal, rms=0.146032Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146032Jy sigma=0.000626 ! Fit after self-cal, rms=0.145897Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=26.22 mas, bpa=18.07 degrees ! Estimated noise=4824.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.36582e-05 Jy ! Component: 100 - total flux cleaned = 0.000350786 Jy ! Component: 150 - total flux cleaned = 0.00046629 Jy ! Component: 200 - total flux cleaned = 0.000622205 Jy ! Total flux subtracted in 200 components = 0.000622205 Jy ! Clean residual min=-0.006055 max=0.004581 Jy/beam ! Clean residual mean=-0.000079 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.530589 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 130 components and 0.530589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145885Jy sigma=0.000626 ! Fit after self-cal, rms=0.145881Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000535611 Jy ! Component: 100 - total flux cleaned = -0.000536682 Jy ! Component: 150 - total flux cleaned = -0.000537968 Jy ! Component: 200 - total flux cleaned = -0.000540174 Jy ! Total flux subtracted in 200 components = -0.000540174 Jy ! Clean residual min=-0.005742 max=0.004568 Jy/beam ! Clean residual mean=-0.000068 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.530049 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 133 components and 0.530049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145883Jy sigma=0.000626 ! Fit after self-cal, rms=0.145884Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=8.26 mas, bpa=14.46 degrees ! Estimated noise=4206.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 8.26 at 14.46 degrees (North through East) ! Clean map min=-0.0072157 max=0.41682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=7.099 mas, bpa=13.45 degrees ! Estimated noise=5151.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.330872 Jy ! Component: 100 - total flux cleaned = 0.419336 Jy ! Component: 150 - total flux cleaned = 0.456742 Jy ! Component: 200 - total flux cleaned = 0.477826 Jy ! Total flux subtracted in 200 components = 0.477826 Jy ! Clean residual min=-0.015180 max=0.014291 Jy/beam ! Clean residual mean=-0.000153 rms=0.003937 Jy/beam ! Combined flux in latest and established models = 0.477827 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.477827 Jy ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=8.26 mas, bpa=14.46 degrees ! Estimated noise=4206.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168186 Jy ! Component: 100 - total flux cleaned = 0.0269364 Jy ! Component: 150 - total flux cleaned = 0.0331759 Jy ! Component: 200 - total flux cleaned = 0.0386296 Jy ! Total flux subtracted in 200 components = 0.0386296 Jy ! Clean residual min=-0.009214 max=0.007926 Jy/beam ! Clean residual mean=-0.000114 rms=0.002232 Jy/beam ! Combined flux in latest and established models = 0.516456 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 59 components and 0.516456 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=26.22 mas, bpa=18.07 degrees ! Estimated noise=4824.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055815 Jy ! Component: 100 - total flux cleaned = 0.00758976 Jy ! Component: 150 - total flux cleaned = 0.00857435 Jy ! Component: 200 - total flux cleaned = 0.00965191 Jy ! Total flux subtracted in 200 components = 0.00965191 Jy ! Clean residual min=-0.006656 max=0.004952 Jy/beam ! Clean residual mean=-0.000121 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.526108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00093283 Jy ! Component: 100 - total flux cleaned = 0.00158431 Jy ! Component: 150 - total flux cleaned = 0.00192394 Jy ! Component: 200 - total flux cleaned = 0.00200068 Jy ! Total flux subtracted in 200 components = 0.00200068 Jy ! Clean residual min=-0.006342 max=0.004670 Jy/beam ! Clean residual mean=-0.000094 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.528109 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 95 components and 0.528109 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=8.26 mas, bpa=14.46 degrees ! Estimated noise=4206.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129177 Jy ! Component: 100 - total flux cleaned = 0.00128976 Jy ! Component: 150 - total flux cleaned = 0.00129182 Jy ! Component: 200 - total flux cleaned = 0.00113426 Jy ! Total flux subtracted in 200 components = 0.00113426 Jy ! Clean residual min=-0.007078 max=0.007120 Jy/beam ! Clean residual mean=-0.000040 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.529243 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.529243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146280Jy sigma=0.000627 ! Fit after self-cal, rms=0.146258Jy sigma=0.000627 wmodel J2248-3235_S_2017_05_01_pus_map.mod ! Writing 112 model components to file: J2248-3235_S_2017_05_01_pus_map.mod wobs J2248-3235_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2248-3235_S_2017_05_01_pus_uvs.fits wwins J2248-3235_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J2248-3235_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648339 Jy ! Component: 100 - total flux cleaned = -0.00152827 Jy ! Component: 150 - total flux cleaned = -0.00239695 Jy ! Component: 200 - total flux cleaned = -0.00302838 Jy ! Component: 250 - total flux cleaned = -0.0032796 Jy ! Component: 300 - total flux cleaned = -0.00311837 Jy ! Component: 350 - total flux cleaned = -0.00273708 Jy ! Component: 400 - total flux cleaned = -0.00222549 Jy ! Component: 450 - total flux cleaned = -0.00179955 Jy ! Component: 500 - total flux cleaned = -0.0014554 Jy ! Component: 550 - total flux cleaned = -0.000988103 Jy ! Component: 600 - total flux cleaned = -0.000728525 Jy ! Component: 650 - total flux cleaned = -0.00060237 Jy ! Component: 700 - total flux cleaned = -0.000664056 Jy ! Component: 750 - total flux cleaned = -0.000663587 Jy ! Component: 800 - total flux cleaned = -0.00060575 Jy ! Component: 850 - total flux cleaned = -0.000662899 Jy ! Component: 900 - total flux cleaned = -0.000606276 Jy ! Component: 950 - total flux cleaned = -0.00071633 Jy ! Component: 1000 - total flux cleaned = -0.000986724 Jy ! Component: 1050 - total flux cleaned = -0.00125208 Jy ! Component: 1100 - total flux cleaned = -0.00146045 Jy ! Component: 1150 - total flux cleaned = -0.00166588 Jy ! Component: 1200 - total flux cleaned = -0.00191844 Jy ! Component: 1250 - total flux cleaned = -0.00211747 Jy ! Component: 1300 - total flux cleaned = -0.00236291 Jy ! Component: 1350 - total flux cleaned = -0.00260485 Jy ! Component: 1400 - total flux cleaned = -0.00284378 Jy ! Component: 1450 - total flux cleaned = -0.00303313 Jy ! Component: 1500 - total flux cleaned = -0.00340677 Jy ! Component: 1550 - total flux cleaned = -0.00368348 Jy ! Component: 1600 - total flux cleaned = -0.00395637 Jy ! Component: 1650 - total flux cleaned = -0.00422574 Jy ! Component: 1700 - total flux cleaned = -0.00435914 Jy ! Component: 1750 - total flux cleaned = -0.0046672 Jy ! Component: 1800 - total flux cleaned = -0.00488462 Jy ! Component: 1850 - total flux cleaned = -0.00518665 Jy ! Component: 1900 - total flux cleaned = -0.00535765 Jy ! Component: 1950 - total flux cleaned = -0.00573815 Jy ! Component: 2000 - total flux cleaned = -0.00598938 Jy ! Component: 2050 - total flux cleaned = -0.00628027 Jy ! Component: 2100 - total flux cleaned = -0.00652714 Jy ! Component: 2150 - total flux cleaned = -0.00673106 Jy ! Component: 2200 - total flux cleaned = -0.00693377 Jy ! Component: 2250 - total flux cleaned = -0.00705457 Jy ! Component: 2300 - total flux cleaned = -0.0072939 Jy ! Component: 2350 - total flux cleaned = -0.00741274 Jy ! Component: 2400 - total flux cleaned = -0.00753091 Jy ! Component: 2450 - total flux cleaned = -0.00760942 Jy ! Component: 2500 - total flux cleaned = -0.00776505 Jy ! Component: 2550 - total flux cleaned = -0.0078034 Jy ! Component: 2600 - total flux cleaned = -0.00788059 Jy ! Component: 2650 - total flux cleaned = -0.00795749 Jy ! Component: 2700 - total flux cleaned = -0.00795763 Jy ! Component: 2750 - total flux cleaned = -0.00799594 Jy ! Component: 2800 - total flux cleaned = -0.00803397 Jy ! Component: 2850 - total flux cleaned = -0.00803399 Jy ! Component: 2900 - total flux cleaned = -0.00803393 Jy ! Component: 2950 - total flux cleaned = -0.00807159 Jy ! Component: 3000 - total flux cleaned = -0.00799643 Jy ! Component: 3050 - total flux cleaned = -0.00803383 Jy ! Component: 3100 - total flux cleaned = -0.00803369 Jy ! Component: 3150 - total flux cleaned = -0.0079961 Jy ! Component: 3200 - total flux cleaned = -0.00803323 Jy ! Component: 3250 - total flux cleaned = -0.00795859 Jy ! Component: 3300 - total flux cleaned = -0.00803303 Jy ! Component: 3350 - total flux cleaned = -0.0079213 Jy ! Component: 3400 - total flux cleaned = -0.00792124 Jy ! Component: 3450 - total flux cleaned = -0.00792116 Jy ! Component: 3500 - total flux cleaned = -0.00792106 Jy ! Component: 3550 - total flux cleaned = -0.00784692 Jy ! Component: 3600 - total flux cleaned = -0.00777208 Jy ! Component: 3650 - total flux cleaned = -0.00773476 Jy ! Component: 3700 - total flux cleaned = -0.00758526 Jy ! Component: 3750 - total flux cleaned = -0.00743538 Jy ! Component: 3800 - total flux cleaned = -0.00736027 Jy ! Component: 3850 - total flux cleaned = -0.00720942 Jy ! Component: 3900 - total flux cleaned = -0.0071337 Jy ! Component: 3950 - total flux cleaned = -0.00698191 Jy ! Component: 4000 - total flux cleaned = -0.00690594 Jy ! Component: 4050 - total flux cleaned = -0.00686754 Jy ! Total flux subtracted in 4096 components = -0.00682908 Jy ! Clean residual min=-0.002080 max=0.002190 Jy/beam ! Clean residual mean=-0.000003 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.522414 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 325 components and 0.522414 Jy ![Exited script file: muppet] wmap "J2248-3235_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 8.26 at 14.46 degrees (North through East) ! Clean map min=-0.0060624 max=0.42076 Jy/beam ! Writing clean map to FITS file: J2248-3235_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.420764 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0007366 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.525187 0.525187 1.05037 2.10075 4.2015 8.403 16.806 33.612 67.224 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.42 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 8.26 at 14.46 degrees (North through East) ! Clean map min=-0.0060624 max=0.42076 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2248-3235_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:45:12 2019