! Started logfile: J2248-3235_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:25:09 2019 obs J2248-3235_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2248-3235_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.308333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2248-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2248-3235_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.771424Jy sigma=0.003528 ! Fit after self-cal, rms=0.712587Jy sigma=0.003342 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.473 mas, bmaj=49.86 mas, bpa=23.62 degrees ! Estimated noise=11146.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254659 Jy ! Component: 100 - total flux cleaned = 0.346312 Jy ! Total flux subtracted in 100 components = 0.346312 Jy ! Clean residual min=-0.049446 max=0.050029 Jy/beam ! Clean residual mean=-0.000057 rms=0.019253 Jy/beam ! Combined flux in latest and established models = 0.346312 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.346312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196874Jy sigma=0.000830 ! Fit after self-cal, rms=0.196588Jy sigma=0.000829 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.199 mas, bmaj=50.39 mas, bpa=23.13 degrees ! Estimated noise=8311.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559609 Jy ! Component: 100 - total flux cleaned = 0.0744353 Jy ! Component: 150 - total flux cleaned = 0.0806255 Jy ! Component: 200 - total flux cleaned = 0.0890921 Jy ! Total flux subtracted in 200 components = 0.0890921 Jy ! Clean residual min=-0.014131 max=0.014160 Jy/beam ! Clean residual mean=-0.000010 rms=0.005611 Jy/beam ! Combined flux in latest and established models = 0.435404 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 91 components and 0.435404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170741Jy sigma=0.000699 ! Fit after self-cal, rms=0.170476Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.23 HN 1.00* KP 0.88 ! LA 0.97 MK 1.00* NL 1.03 OV 1.00* ! PT 1.61 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.71 HN 1.00* KP 1.00 ! LA 0.98 MK 1.00* NL 1.08 OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.48 FD 0.99 HN 1.00* KP 1.04 ! LA 0.97 MK 1.00* NL 0.89 OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.170476Jy sigma=0.000698 ! Fit after self-cal, rms=0.162309Jy sigma=0.000606 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.48 mas, bmaj=49.8 mas, bpa=22.37 degrees ! Estimated noise=8599.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631772 Jy ! Component: 100 - total flux cleaned = 0.00678399 Jy ! Component: 150 - total flux cleaned = 0.00582926 Jy ! Component: 200 - total flux cleaned = 0.00554192 Jy ! Total flux subtracted in 200 components = 0.00554192 Jy ! Clean residual min=-0.004497 max=0.004530 Jy/beam ! Clean residual mean=0.000061 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.440946 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 157 components and 0.440946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160233Jy sigma=0.000598 ! Fit after self-cal, rms=0.160611Jy sigma=0.000597 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160611Jy sigma=0.000597 ! Fit after self-cal, rms=0.160267Jy sigma=0.000596 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.49 mas, bmaj=49.88 mas, bpa=22.38 degrees ! Estimated noise=8570.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346077 Jy ! Component: 100 - total flux cleaned = 0.00348869 Jy ! Component: 150 - total flux cleaned = 0.00349915 Jy ! Component: 200 - total flux cleaned = 0.00427607 Jy ! Total flux subtracted in 200 components = 0.00427607 Jy ! Clean residual min=-0.003097 max=0.003106 Jy/beam ! Clean residual mean=0.000042 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.445222 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 205 components and 0.445222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159453Jy sigma=0.000594 ! Fit after self-cal, rms=0.159375Jy sigma=0.000594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110623 Jy ! Component: 100 - total flux cleaned = 0.00145383 Jy ! Component: 150 - total flux cleaned = 0.00145394 Jy ! Component: 200 - total flux cleaned = 0.00160552 Jy ! Total flux subtracted in 200 components = 0.00160552 Jy ! Clean residual min=-0.002481 max=0.002470 Jy/beam ! Clean residual mean=0.000037 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.446827 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 240 components and 0.446827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158885Jy sigma=0.000593 ! Fit after self-cal, rms=0.158902Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158902Jy sigma=0.000593 ! Fit after self-cal, rms=0.158833Jy sigma=0.000593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.495 mas, bmaj=49.91 mas, bpa=22.38 degrees ! Estimated noise=8568.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180497 Jy ! Component: 100 - total flux cleaned = 0.00241516 Jy ! Component: 150 - total flux cleaned = 0.00269163 Jy ! Component: 200 - total flux cleaned = 0.00269617 Jy ! Total flux subtracted in 200 components = 0.00269617 Jy ! Clean residual min=-0.002093 max=0.002081 Jy/beam ! Clean residual mean=0.000035 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.449523 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 270 components and 0.449523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158452Jy sigma=0.000592 ! Fit after self-cal, rms=0.158447Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285522 Jy ! Component: 100 - total flux cleaned = 0.000537167 Jy ! Component: 150 - total flux cleaned = 0.000773514 Jy ! Component: 200 - total flux cleaned = 0.000771844 Jy ! Total flux subtracted in 200 components = 0.000771844 Jy ! Clean residual min=-0.001810 max=0.001811 Jy/beam ! Clean residual mean=0.000036 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.450295 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 312 components and 0.450295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158173Jy sigma=0.000591 ! Fit after self-cal, rms=0.158198Jy sigma=0.000591 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158198Jy sigma=0.000591 ! Fit after self-cal, rms=0.158264Jy sigma=0.000591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.753 mas, bmaj=49.79 mas, bpa=21.91 degrees ! Estimated noise=8773.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479243 Jy ! Component: 100 - total flux cleaned = 0.00135124 Jy ! Component: 150 - total flux cleaned = 0.00161744 Jy ! Component: 200 - total flux cleaned = 0.00144631 Jy ! Total flux subtracted in 200 components = 0.00144631 Jy ! Clean residual min=-0.001415 max=0.001412 Jy/beam ! Clean residual mean=0.000045 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.451741 Jy selfcal ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 377 components and 0.451741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158062Jy sigma=0.000591 ! Fit after self-cal, rms=0.158046Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.04366e-05 Jy ! Component: 100 - total flux cleaned = 4.90721e-05 Jy ! Component: 150 - total flux cleaned = 0.000296153 Jy ! Component: 200 - total flux cleaned = 0.00045715 Jy ! Total flux subtracted in 200 components = 0.00045715 Jy ! Clean residual min=-0.001341 max=0.001333 Jy/beam ! Clean residual mean=0.000045 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.452198 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 413 components and 0.452198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157880Jy sigma=0.000591 ! Fit after self-cal, rms=0.157895Jy sigma=0.000591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.494 mas, bmaj=49.94 mas, bpa=22.39 degrees ! Estimated noise=8566.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.494 x 49.94 at 22.39 degrees (North through East) ! Clean map min=-0.013581 max=0.23281 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.104 mas, bmaj=49.31 mas, bpa=23.22 degrees ! Estimated noise=11511.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.248301 Jy ! Component: 100 - total flux cleaned = 0.339786 Jy ! Component: 150 - total flux cleaned = 0.383292 Jy ! Component: 200 - total flux cleaned = 0.396463 Jy ! Total flux subtracted in 200 components = 0.396463 Jy ! Clean residual min=-0.019516 max=0.019788 Jy/beam ! Clean residual mean=0.000030 rms=0.008477 Jy/beam ! Combined flux in latest and established models = 0.396463 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 81 model components to the UV plane model. ! The established model now contains 81 components and 0.396463 Jy ! Inverting map and beam ! Estimated beam: bmin=8.494 mas, bmaj=49.94 mas, bpa=22.39 degrees ! Estimated noise=8566.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269809 Jy ! Component: 100 - total flux cleaned = 0.0311332 Jy ! Component: 150 - total flux cleaned = 0.035065 Jy ! Component: 200 - total flux cleaned = 0.0377122 Jy ! Total flux subtracted in 200 components = 0.0377122 Jy ! Clean residual min=-0.008071 max=0.008030 Jy/beam ! Clean residual mean=-0.000005 rms=0.003276 Jy/beam ! Combined flux in latest and established models = 0.434175 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 141 components and 0.434175 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.753 mas, bmaj=49.79 mas, bpa=21.91 degrees ! Estimated noise=8773.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328938 Jy ! Component: 100 - total flux cleaned = 0.00527543 Jy ! Component: 150 - total flux cleaned = 0.00477645 Jy ! Component: 200 - total flux cleaned = 0.00430574 Jy ! Total flux subtracted in 200 components = 0.00430574 Jy ! Clean residual min=-0.003650 max=0.003667 Jy/beam ! Clean residual mean=0.000002 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.438481 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.47194e-06 Jy ! Component: 100 - total flux cleaned = 0.000765331 Jy ! Component: 150 - total flux cleaned = 0.00150415 Jy ! Component: 200 - total flux cleaned = 0.0013313 Jy ! Total flux subtracted in 200 components = 0.0013313 Jy ! Clean residual min=-0.002931 max=0.002927 Jy/beam ! Clean residual mean=0.000013 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.439812 Jy ! Adding 134 model components to the UV plane model. ! The established model now contains 273 components and 0.439812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.494 mas, bmaj=49.94 mas, bpa=22.39 degrees ! Estimated noise=8566.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044193 Jy ! Component: 100 - total flux cleaned = -0.000817619 Jy ! Component: 150 - total flux cleaned = -0.00117512 Jy ! Component: 200 - total flux cleaned = -0.00133756 Jy ! Total flux subtracted in 200 components = -0.00133756 Jy ! Clean residual min=-0.002641 max=0.002660 Jy/beam ! Clean residual mean=0.000023 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.438474 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 321 components and 0.438474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158770Jy sigma=0.000593 ! Fit after self-cal, rms=0.158761Jy sigma=0.000593 wmodel J2248-3235_S_2017_01_16_pus_map.mod ! Writing 321 model components to file: J2248-3235_S_2017_01_16_pus_map.mod wobs J2248-3235_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2248-3235_S_2017_01_16_pus_uvs.fits wwins J2248-3235_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2248-3235_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.494 x 49.94 at 22.39 degrees (North through East) ! Clean map min=-0.014677 max=0.21726 Jy/beam ! Writing clean map to FITS file: J2248-3235_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.217264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103205 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42506 1.42506 2.85013 5.70026 11.4005 22.801 45.6021 91.2041 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.217 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.494 x 49.94 at 22.39 degrees (North through East) ! Clean map min=-0.014677 max=0.21726 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2248-3235_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:25:14 2019