! Started logfile: J2247-3657_S_2017_10_21_pus_uvs.log on Sat May 11 21:07:33 2019 obs J2247-3657_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2247-3657_S_2017_10_21_pus_uva.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.742063 visibilities/baseline/integration-bin. ! Found source: J2247-3657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2247-3657_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.655969Jy sigma=0.004659 ! Fit after self-cal, rms=0.638053Jy sigma=0.004523 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=23.46 mas, bpa=-11.15 degrees ! Estimated noise=4224.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.259784 Jy ! Component: 100 - total flux cleaned = 0.343453 Jy ! Total flux subtracted in 100 components = 0.343453 Jy ! Clean residual min=-0.034992 max=0.056355 Jy/beam ! Clean residual mean=-0.000334 rms=0.014562 Jy/beam ! Combined flux in latest and established models = 0.343453 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.343453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213156Jy sigma=0.001448 ! Fit after self-cal, rms=0.213104Jy sigma=0.001448 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=25.52 mas, bpa=-10.74 degrees ! Estimated noise=3379.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989303 Jy ! Component: 100 - total flux cleaned = 0.151052 Jy ! Component: 150 - total flux cleaned = 0.182598 Jy ! Component: 200 - total flux cleaned = 0.202463 Jy ! Total flux subtracted in 200 components = 0.202463 Jy ! Clean residual min=-0.023199 max=0.033005 Jy/beam ! Clean residual mean=-0.000178 rms=0.008282 Jy/beam ! Combined flux in latest and established models = 0.545915 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 124 components and 0.545915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165598Jy sigma=0.001014 ! Fit after self-cal, rms=0.165568Jy sigma=0.001013 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.05 ! LA 0.97 MK 1.05 NL 1.00* OV 0.92 ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00 ! LA 0.93 MK 1.02 NL 1.00* OV 0.92 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.53 FD 0.98 HN 1.00* KP 1.00 ! LA 0.71 MK 1.03 NL 1.89 OV 0.90 ! PT 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00* ! LA 2.50 MK 1.04 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.165568Jy sigma=0.001013 ! Fit after self-cal, rms=0.175913Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=27.58 mas, bpa=-10.87 degrees ! Estimated noise=3471.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327188 Jy ! Component: 100 - total flux cleaned = -0.00385239 Jy ! Component: 150 - total flux cleaned = -0.00385369 Jy ! Component: 200 - total flux cleaned = -0.00410172 Jy ! Total flux subtracted in 200 components = -0.00410172 Jy ! Clean residual min=-0.010213 max=0.012148 Jy/beam ! Clean residual mean=-0.000161 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 0.541814 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 137 components and 0.541814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175474Jy sigma=0.000710 ! Fit after self-cal, rms=0.176456Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176456Jy sigma=0.000709 ! Fit after self-cal, rms=0.178027Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=27.64 mas, bpa=-10.87 degrees ! Estimated noise=3471.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237579 Jy ! Component: 100 - total flux cleaned = -0.00301689 Jy ! Component: 150 - total flux cleaned = -0.0032523 Jy ! Component: 200 - total flux cleaned = -0.00335858 Jy ! Total flux subtracted in 200 components = -0.00335858 Jy ! Clean residual min=-0.009894 max=0.011714 Jy/beam ! Clean residual mean=-0.000166 rms=0.003132 Jy/beam ! Combined flux in latest and established models = 0.538455 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 143 components and 0.538455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177680Jy sigma=0.000707 ! Fit after self-cal, rms=0.177719Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040582 Jy ! Component: 100 - total flux cleaned = -0.000409188 Jy ! Component: 150 - total flux cleaned = -0.000409716 Jy ! Component: 200 - total flux cleaned = -0.000409559 Jy ! Total flux subtracted in 200 components = -0.000409559 Jy ! Clean residual min=-0.009611 max=0.011362 Jy/beam ! Clean residual mean=-0.000169 rms=0.003027 Jy/beam ! Combined flux in latest and established models = 0.538045 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 149 components and 0.538045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177482Jy sigma=0.000706 ! Fit after self-cal, rms=0.177513Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177513Jy sigma=0.000706 ! Fit after self-cal, rms=0.178954Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=27.7 mas, bpa=-10.87 degrees ! Estimated noise=3471.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198988 Jy ! Component: 100 - total flux cleaned = -0.00242277 Jy ! Component: 150 - total flux cleaned = -0.00282089 Jy ! Component: 200 - total flux cleaned = -0.00291426 Jy ! Total flux subtracted in 200 components = -0.00291426 Jy ! Clean residual min=-0.009283 max=0.011022 Jy/beam ! Clean residual mean=-0.000175 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 0.535131 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 152 components and 0.535131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178675Jy sigma=0.000705 ! Fit after self-cal, rms=0.178715Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372439 Jy ! Component: 100 - total flux cleaned = -0.000279671 Jy ! Component: 150 - total flux cleaned = -0.00027792 Jy ! Component: 200 - total flux cleaned = -0.000196382 Jy ! Total flux subtracted in 200 components = -0.000196382 Jy ! Clean residual min=-0.009079 max=0.010869 Jy/beam ! Clean residual mean=-0.000176 rms=0.002874 Jy/beam ! Combined flux in latest and established models = 0.534935 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 159 components and 0.534935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178506Jy sigma=0.000704 ! Fit after self-cal, rms=0.178530Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178530Jy sigma=0.000704 ! Fit after self-cal, rms=0.179675Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.57 mas, bmaj=36.86 mas, bpa=4.968 degrees ! Estimated noise=4157.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.59866e-05 Jy ! Component: 100 - total flux cleaned = 6.4882e-05 Jy ! Component: 150 - total flux cleaned = 0.000272676 Jy ! Component: 200 - total flux cleaned = 0.000373407 Jy ! Total flux subtracted in 200 components = 0.000373407 Jy ! Clean residual min=-0.009032 max=0.011828 Jy/beam ! Clean residual mean=-0.000266 rms=0.003366 Jy/beam ! Combined flux in latest and established models = 0.535308 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 163 components and 0.535308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179530Jy sigma=0.000703 ! Fit after self-cal, rms=0.179543Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176541 Jy ! Component: 100 - total flux cleaned = 0.000361049 Jy ! Component: 150 - total flux cleaned = 0.000448414 Jy ! Component: 200 - total flux cleaned = 0.000615506 Jy ! Total flux subtracted in 200 components = 0.000615506 Jy ! Clean residual min=-0.008755 max=0.011729 Jy/beam ! Clean residual mean=-0.000262 rms=0.003269 Jy/beam ! Combined flux in latest and established models = 0.535924 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 165 components and 0.535924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179422Jy sigma=0.000703 ! Fit after self-cal, rms=0.179433Jy sigma=0.000703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=27.77 mas, bpa=-10.88 degrees ! Estimated noise=3470.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 27.77 at -10.88 degrees (North through East) ! Clean map min=-0.0089274 max=0.34601 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=26.87 mas, bpa=-11.41 degrees ! Estimated noise=4729.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28952 Jy ! Component: 100 - total flux cleaned = 0.376475 Jy ! Component: 150 - total flux cleaned = 0.42126 Jy ! Component: 200 - total flux cleaned = 0.449253 Jy ! Total flux subtracted in 200 components = 0.449253 Jy ! Clean residual min=-0.013956 max=0.019228 Jy/beam ! Clean residual mean=-0.000214 rms=0.005291 Jy/beam ! Combined flux in latest and established models = 0.449253 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.449253 Jy ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=27.77 mas, bpa=-10.88 degrees ! Estimated noise=3470.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030063 Jy ! Component: 100 - total flux cleaned = 0.0484765 Jy ! Component: 150 - total flux cleaned = 0.0605187 Jy ! Component: 200 - total flux cleaned = 0.0686568 Jy ! Total flux subtracted in 200 components = 0.0686568 Jy ! Clean residual min=-0.009394 max=0.010084 Jy/beam ! Clean residual mean=-0.000250 rms=0.003030 Jy/beam ! Combined flux in latest and established models = 0.517909 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 136 components and 0.517909 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.57 mas, bmaj=36.86 mas, bpa=4.968 degrees ! Estimated noise=4157.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846621 Jy ! Component: 100 - total flux cleaned = 0.0128954 Jy ! Component: 150 - total flux cleaned = 0.0154254 Jy ! Component: 200 - total flux cleaned = 0.0158556 Jy ! Total flux subtracted in 200 components = 0.0158556 Jy ! Clean residual min=-0.008361 max=0.011632 Jy/beam ! Clean residual mean=-0.000280 rms=0.003271 Jy/beam ! Combined flux in latest and established models = 0.533765 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131599 Jy ! Component: 100 - total flux cleaned = 0.000263846 Jy ! Component: 150 - total flux cleaned = 0.000327835 Jy ! Component: 200 - total flux cleaned = 0.000392988 Jy ! Total flux subtracted in 200 components = 0.000392988 Jy ! Clean residual min=-0.008137 max=0.011700 Jy/beam ! Clean residual mean=-0.000277 rms=0.003241 Jy/beam ! Combined flux in latest and established models = 0.534158 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 165 components and 0.534158 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=27.77 mas, bpa=-10.88 degrees ! Estimated noise=3470.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000854454 Jy ! Component: 100 - total flux cleaned = -0.000972068 Jy ! Component: 150 - total flux cleaned = -0.00106743 Jy ! Component: 200 - total flux cleaned = -0.0010671 Jy ! Total flux subtracted in 200 components = -0.0010671 Jy ! Clean residual min=-0.008772 max=0.010525 Jy/beam ! Clean residual mean=-0.000175 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.533091 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 183 components and 0.533091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178488Jy sigma=0.000701 ! Fit after self-cal, rms=0.178328Jy sigma=0.000701 wmodel J2247-3657_S_2017_10_21_pus_map.mod ! Writing 183 model components to file: J2247-3657_S_2017_10_21_pus_map.mod wobs J2247-3657_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2247-3657_S_2017_10_21_pus_uvs.fits wwins J2247-3657_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2247-3657_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197634 Jy ! Component: 100 - total flux cleaned = 0.00269708 Jy ! Component: 150 - total flux cleaned = 0.00341486 Jy ! Component: 200 - total flux cleaned = 0.00430881 Jy ! Component: 250 - total flux cleaned = 0.00503158 Jy ! Component: 300 - total flux cleaned = 0.00560776 Jy ! Component: 350 - total flux cleaned = 0.00578865 Jy ! Component: 400 - total flux cleaned = 0.00638774 Jy ! Component: 450 - total flux cleaned = 0.00680108 Jy ! Component: 500 - total flux cleaned = 0.00735964 Jy ! Component: 550 - total flux cleaned = 0.00789633 Jy ! Component: 600 - total flux cleaned = 0.00819435 Jy ! Component: 650 - total flux cleaned = 0.00869681 Jy ! Component: 700 - total flux cleaned = 0.00918303 Jy ! Component: 750 - total flux cleaned = 0.00972443 Jy ! Component: 800 - total flux cleaned = 0.010187 Jy ! Component: 850 - total flux cleaned = 0.01051 Jy ! Component: 900 - total flux cleaned = 0.0110842 Jy ! Component: 950 - total flux cleaned = 0.0114606 Jy ! Component: 1000 - total flux cleaned = 0.011647 Jy ! Component: 1050 - total flux cleaned = 0.0119536 Jy ! Component: 1100 - total flux cleaned = 0.0121356 Jy ! Component: 1150 - total flux cleaned = 0.0121955 Jy ! Component: 1200 - total flux cleaned = 0.0123154 Jy ! Component: 1250 - total flux cleaned = 0.0123751 Jy ! Component: 1300 - total flux cleaned = 0.0124935 Jy ! Component: 1350 - total flux cleaned = 0.012552 Jy ! Component: 1400 - total flux cleaned = 0.0125516 Jy ! Component: 1450 - total flux cleaned = 0.0126105 Jy ! Component: 1500 - total flux cleaned = 0.0126689 Jy ! Component: 1550 - total flux cleaned = 0.0125513 Jy ! Component: 1600 - total flux cleaned = 0.0126105 Jy ! Component: 1650 - total flux cleaned = 0.0125518 Jy ! Component: 1700 - total flux cleaned = 0.012786 Jy ! Component: 1750 - total flux cleaned = 0.0129619 Jy ! Component: 1800 - total flux cleaned = 0.013022 Jy ! Component: 1850 - total flux cleaned = 0.0130226 Jy ! Component: 1900 - total flux cleaned = 0.0131445 Jy ! Component: 1950 - total flux cleaned = 0.0132682 Jy ! Component: 2000 - total flux cleaned = 0.0133936 Jy ! Component: 2050 - total flux cleaned = 0.0135851 Jy ! Component: 2100 - total flux cleaned = 0.0138452 Jy ! Component: 2150 - total flux cleaned = 0.0141101 Jy ! Component: 2200 - total flux cleaned = 0.0143129 Jy ! Component: 2250 - total flux cleaned = 0.0145191 Jy ! Component: 2300 - total flux cleaned = 0.0148674 Jy ! Component: 2350 - total flux cleaned = 0.0151508 Jy ! Component: 2400 - total flux cleaned = 0.015514 Jy ! Component: 2450 - total flux cleaned = 0.0158102 Jy ! Component: 2500 - total flux cleaned = 0.0161898 Jy ! Component: 2550 - total flux cleaned = 0.0165015 Jy ! Component: 2600 - total flux cleaned = 0.0168203 Jy ! Component: 2650 - total flux cleaned = 0.017145 Jy ! Component: 2700 - total flux cleaned = 0.0175603 Jy ! Component: 2750 - total flux cleaned = 0.0179017 Jy ! Component: 2800 - total flux cleaned = 0.0181626 Jy ! Component: 2850 - total flux cleaned = 0.01852 Jy ! Component: 2900 - total flux cleaned = 0.0189778 Jy ! Component: 2950 - total flux cleaned = 0.019261 Jy ! Component: 3000 - total flux cleaned = 0.0195489 Jy ! Component: 3050 - total flux cleaned = 0.0199405 Jy ! Component: 3100 - total flux cleaned = 0.0203438 Jy ! Component: 3150 - total flux cleaned = 0.0206531 Jy ! Component: 3200 - total flux cleaned = 0.020969 Jy ! Component: 3250 - total flux cleaned = 0.0212945 Jy ! Component: 3300 - total flux cleaned = 0.0217425 Jy ! Component: 3350 - total flux cleaned = 0.0219713 Jy ! Component: 3400 - total flux cleaned = 0.0223236 Jy ! Component: 3450 - total flux cleaned = 0.022686 Jy ! Component: 3500 - total flux cleaned = 0.0229311 Jy ! Component: 3550 - total flux cleaned = 0.0233127 Jy ! Component: 3600 - total flux cleaned = 0.0237049 Jy ! Component: 3650 - total flux cleaned = 0.0241074 Jy ! Component: 3700 - total flux cleaned = 0.0243813 Jy ! Component: 3750 - total flux cleaned = 0.0248045 Jy ! Component: 3800 - total flux cleaned = 0.0249487 Jy ! Component: 3850 - total flux cleaned = 0.0250971 Jy ! Component: 3900 - total flux cleaned = 0.0252515 Jy ! Component: 3950 - total flux cleaned = 0.0250934 Jy ! Component: 4000 - total flux cleaned = 0.0254132 Jy ! Component: 4050 - total flux cleaned = 0.0255794 Jy ! Total flux subtracted in 4096 components = 0.025749 Jy ! Clean residual min=-0.009219 max=0.009077 Jy/beam ! Clean residual mean=0.000172 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.55884 Jy keep ! Adding 187 model components to the UV plane model. ! The established model now contains 370 components and 0.55884 Jy ![Exited script file: muppet] wmap "J2247-3657_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 27.77 at -10.88 degrees (North through East) ! Clean map min=-0.020875 max=0.39128 Jy/beam ! Writing clean map to FITS file: J2247-3657_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.391284 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00314252 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.40939 2.40939 4.81878 9.63757 19.2751 38.5503 77.1005 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0094 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.391 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 27.77 at -10.88 degrees (North through East) ! Clean map min=-0.020875 max=0.39128 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2247-3657_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:07:37 2019