! Started logfile: J2247-3657_S_2017_05_27_pus_uvs.log on Fri May 3 11:16:01 2019 obs J2247-3657_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2247-3657_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.294444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2247-3657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2247-3657_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.554263Jy sigma=0.003665 ! Fit after self-cal, rms=0.554050Jy sigma=0.003663 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=30.16 mas, bpa=-6.915 degrees ! Estimated noise=6777.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.340472 Jy ! Component: 100 - total flux cleaned = 0.467781 Jy ! Total flux subtracted in 100 components = 0.467781 Jy ! Clean residual min=-0.031624 max=0.057183 Jy/beam ! Clean residual mean=0.000077 rms=0.014981 Jy/beam ! Combined flux in latest and established models = 0.467781 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.467781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147263Jy sigma=0.000896 ! Fit after self-cal, rms=0.146896Jy sigma=0.000895 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=29.23 mas, bpa=-6.619 degrees ! Estimated noise=6082.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0718083 Jy ! Component: 100 - total flux cleaned = 0.104377 Jy ! Component: 150 - total flux cleaned = 0.117133 Jy ! Component: 200 - total flux cleaned = 0.118571 Jy ! Total flux subtracted in 200 components = 0.118571 Jy ! Clean residual min=-0.008475 max=0.008378 Jy/beam ! Clean residual mean=-0.000029 rms=0.003599 Jy/beam ! Combined flux in latest and established models = 0.586352 Jy ! Performing phase self-cal ! Adding 96 model components to the UV plane model. ! The established model now contains 103 components and 0.586352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106921Jy sigma=0.000663 ! Fit after self-cal, rms=0.106751Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.00 ! LA 1.02 MK 0.98 NL 1.00* OV 1.06 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00 ! LA 0.96 MK 1.07 NL 1.00* OV 1.02 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.98 ! LA 0.93 MK 1.02 NL 1.00* OV 0.97 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106751Jy sigma=0.000662 ! Fit after self-cal, rms=0.100457Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=28.96 mas, bpa=-6.693 degrees ! Estimated noise=6210.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443782 Jy ! Component: 100 - total flux cleaned = 0.00563997 Jy ! Component: 150 - total flux cleaned = 0.00667477 Jy ! Component: 200 - total flux cleaned = 0.00800756 Jy ! Total flux subtracted in 200 components = 0.00800756 Jy ! Clean residual min=-0.003489 max=0.003479 Jy/beam ! Clean residual mean=0.000032 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.59436 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 163 components and 0.59436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098949Jy sigma=0.000625 ! Fit after self-cal, rms=0.098932Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098932Jy sigma=0.000625 ! Fit after self-cal, rms=0.098709Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=28.96 mas, bpa=-6.689 degrees ! Estimated noise=6200.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112066 Jy ! Component: 100 - total flux cleaned = 0.000450909 Jy ! Component: 150 - total flux cleaned = 0.000885649 Jy ! Component: 200 - total flux cleaned = 0.00154115 Jy ! Total flux subtracted in 200 components = 0.00154115 Jy ! Clean residual min=-0.002080 max=0.002085 Jy/beam ! Clean residual mean=0.000024 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.595901 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 196 components and 0.595901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098228Jy sigma=0.000622 ! Fit after self-cal, rms=0.098223Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127991 Jy ! Component: 100 - total flux cleaned = 0.000347396 Jy ! Component: 150 - total flux cleaned = 0.000345423 Jy ! Component: 200 - total flux cleaned = 0.000532603 Jy ! Total flux subtracted in 200 components = 0.000532603 Jy ! Clean residual min=-0.001501 max=0.001517 Jy/beam ! Clean residual mean=0.000022 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.596433 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 230 components and 0.596434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098030Jy sigma=0.000620 ! Fit after self-cal, rms=0.098026Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098026Jy sigma=0.000620 ! Fit after self-cal, rms=0.097956Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=28.96 mas, bpa=-6.685 degrees ! Estimated noise=6199.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059084 Jy ! Component: 100 - total flux cleaned = 0.000773194 Jy ! Component: 150 - total flux cleaned = 0.000689103 Jy ! Component: 200 - total flux cleaned = 0.000771244 Jy ! Total flux subtracted in 200 components = 0.000771244 Jy ! Clean residual min=-0.001322 max=0.001312 Jy/beam ! Clean residual mean=0.000022 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.597205 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 249 components and 0.597205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097818Jy sigma=0.000619 ! Fit after self-cal, rms=0.097816Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391254 Jy ! Component: 100 - total flux cleaned = 0.000599681 Jy ! Component: 150 - total flux cleaned = 0.000798123 Jy ! Component: 200 - total flux cleaned = 0.000734542 Jy ! Total flux subtracted in 200 components = 0.000734542 Jy ! Clean residual min=-0.001052 max=0.001043 Jy/beam ! Clean residual mean=0.000017 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.597939 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 274 components and 0.597939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097732Jy sigma=0.000619 ! Fit after self-cal, rms=0.097728Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097728Jy sigma=0.000619 ! Fit after self-cal, rms=0.097725Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.2 mas, bmaj=35.09 mas, bpa=6.86 degrees ! Estimated noise=7725.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000844668 Jy ! Component: 100 - total flux cleaned = -0.00120108 Jy ! Component: 150 - total flux cleaned = -0.00126004 Jy ! Component: 200 - total flux cleaned = -0.00131909 Jy ! Total flux subtracted in 200 components = -0.00131909 Jy ! Clean residual min=-0.001018 max=0.001012 Jy/beam ! Clean residual mean=0.000032 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.59662 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 312 components and 0.59662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097674Jy sigma=0.000618 ! Fit after self-cal, rms=0.097668Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.46005e-05 Jy ! Component: 100 - total flux cleaned = 0.000389492 Jy ! Component: 150 - total flux cleaned = 0.000491648 Jy ! Component: 200 - total flux cleaned = 0.000746758 Jy ! Total flux subtracted in 200 components = 0.000746758 Jy ! Clean residual min=-0.000845 max=0.000843 Jy/beam ! Clean residual mean=0.000033 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.597367 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 350 components and 0.597367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097626Jy sigma=0.000618 ! Fit after self-cal, rms=0.097625Jy sigma=0.000618 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=28.97 mas, bpa=-6.683 degrees ! Estimated noise=6201.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 28.97 at -6.683 degrees (North through East) ! Clean map min=-0.0090653 max=0.37486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=30.11 mas, bpa=-7.183 degrees ! Estimated noise=6896.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.340086 Jy ! Component: 100 - total flux cleaned = 0.464513 Jy ! Component: 150 - total flux cleaned = 0.521896 Jy ! Component: 200 - total flux cleaned = 0.545157 Jy ! Total flux subtracted in 200 components = 0.545157 Jy ! Clean residual min=-0.013113 max=0.013328 Jy/beam ! Clean residual mean=0.000062 rms=0.004951 Jy/beam ! Combined flux in latest and established models = 0.545157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.545157 Jy ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=28.97 mas, bpa=-6.683 degrees ! Estimated noise=6201.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170604 Jy ! Component: 100 - total flux cleaned = 0.0169794 Jy ! Component: 150 - total flux cleaned = 0.0169297 Jy ! Component: 200 - total flux cleaned = 0.0173017 Jy ! Total flux subtracted in 200 components = 0.0173017 Jy ! Clean residual min=-0.005416 max=0.005461 Jy/beam ! Clean residual mean=0.000058 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 0.562459 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 126 components and 0.562459 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.2 mas, bmaj=35.09 mas, bpa=6.86 degrees ! Estimated noise=7725.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586818 Jy ! Component: 100 - total flux cleaned = 0.00701946 Jy ! Component: 150 - total flux cleaned = 0.00759352 Jy ! Component: 200 - total flux cleaned = 0.00796127 Jy ! Total flux subtracted in 200 components = 0.00796127 Jy ! Clean residual min=-0.002941 max=0.002951 Jy/beam ! Clean residual mean=0.000043 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.57042 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866209 Jy ! Component: 100 - total flux cleaned = 0.000706946 Jy ! Component: 150 - total flux cleaned = 0.00102877 Jy ! Component: 200 - total flux cleaned = 0.00167399 Jy ! Total flux subtracted in 200 components = 0.00167399 Jy ! Clean residual min=-0.002685 max=0.002706 Jy/beam ! Clean residual mean=0.000035 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.572094 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 230 components and 0.572094 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=28.97 mas, bpa=-6.683 degrees ! Estimated noise=6201.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221087 Jy ! Component: 100 - total flux cleaned = 0.000582367 Jy ! Component: 150 - total flux cleaned = 0.00125689 Jy ! Component: 200 - total flux cleaned = 0.00173533 Jy ! Total flux subtracted in 200 components = 0.00173533 Jy ! Clean residual min=-0.002505 max=0.002520 Jy/beam ! Clean residual mean=0.000008 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.573829 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 270 components and 0.573829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098217Jy sigma=0.000622 ! Fit after self-cal, rms=0.098191Jy sigma=0.000622 wmodel J2247-3657_S_2017_05_27_pus_map.mod ! Writing 270 model components to file: J2247-3657_S_2017_05_27_pus_map.mod wobs J2247-3657_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2247-3657_S_2017_05_27_pus_uvs.fits wwins J2247-3657_S_2017_05_27_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2247-3657_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 28.97 at -6.683 degrees (North through East) ! Clean map min=-0.0081647 max=0.3788 Jy/beam ! Writing clean map to FITS file: J2247-3657_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.378798 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000952307 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.754208 0.754208 1.50842 3.01683 6.03366 12.0673 24.1347 48.2693 96.5386 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.378 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 28.97 at -6.683 degrees (North through East) ! Clean map min=-0.0081647 max=0.3788 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2247-3657_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:16:04 2019