! Started logfile: J2247-3657_S_2017_02_24_pus_uvs.log on Sat May 4 11:37:02 2019 obs J2247-3657_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2247-3657_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.561111 visibilities/baseline/integration-bin. ! Found source: J2247-3657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2247-3657_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.735952Jy sigma=0.003194 ! Fit after self-cal, rms=0.721631Jy sigma=0.003148 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=6.573 mas, bpa=6.721 degrees ! Estimated noise=6261.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298109 Jy ! Component: 100 - total flux cleaned = 0.383801 Jy ! Total flux subtracted in 100 components = 0.383801 Jy ! Clean residual min=-0.028676 max=0.044164 Jy/beam ! Clean residual mean=-0.001190 rms=0.010824 Jy/beam ! Combined flux in latest and established models = 0.383801 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.383801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552985Jy sigma=0.000979 ! Fit after self-cal, rms=0.552971Jy sigma=0.000978 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.786 mas, bpa=7.497 degrees ! Estimated noise=5445.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816306 Jy ! Component: 100 - total flux cleaned = 0.12432 Jy ! Component: 150 - total flux cleaned = 0.148419 Jy ! Component: 200 - total flux cleaned = 0.162245 Jy ! Total flux subtracted in 200 components = 0.162245 Jy ! Clean residual min=-0.036684 max=0.040727 Jy/beam ! Clean residual mean=-0.001690 rms=0.011088 Jy/beam ! Combined flux in latest and established models = 0.546046 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 0.546046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.521771Jy sigma=0.000842 ! Fit after self-cal, rms=0.521854Jy sigma=0.000842 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00* KP 1.00* ! LA 0.97 MK 1.08 NL 1.37 OV 1.14 ! PT 0.95 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.83 HN 1.00* KP 1.00* ! LA 0.91 MK 1.03 NL 0.82 OV 1.20 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.00* KP 1.00* ! LA 0.95 MK 1.05 NL 1.36 OV 1.11 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.10 HN 1.00* KP 1.00* ! LA 0.18 MK 0.98 NL 1.00* OV 1.07 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.521854Jy sigma=0.000842 ! Fit after self-cal, rms=0.170618Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=7.853 mas, bpa=7.562 degrees ! Estimated noise=5468.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194513 Jy ! Component: 100 - total flux cleaned = 0.00237528 Jy ! Component: 150 - total flux cleaned = 0.00286495 Jy ! Component: 200 - total flux cleaned = 0.00322227 Jy ! Total flux subtracted in 200 components = 0.00322227 Jy ! Clean residual min=-0.020024 max=0.023035 Jy/beam ! Clean residual mean=-0.000341 rms=0.005980 Jy/beam ! Combined flux in latest and established models = 0.549268 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.549268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170321Jy sigma=0.000671 ! Fit after self-cal, rms=0.170522Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170522Jy sigma=0.000670 ! Fit after self-cal, rms=0.170538Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=7.851 mas, bpa=7.67 degrees ! Estimated noise=5477.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152321 Jy ! Component: 100 - total flux cleaned = 0.00177441 Jy ! Component: 150 - total flux cleaned = 0.00192951 Jy ! Component: 200 - total flux cleaned = 0.0021467 Jy ! Total flux subtracted in 200 components = 0.0021467 Jy ! Clean residual min=-0.019808 max=0.022655 Jy/beam ! Clean residual mean=-0.000346 rms=0.005941 Jy/beam ! Combined flux in latest and established models = 0.551415 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.551415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170296Jy sigma=0.000670 ! Fit after self-cal, rms=0.170379Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065131 Jy ! Component: 100 - total flux cleaned = 0.000665462 Jy ! Component: 150 - total flux cleaned = 0.000725905 Jy ! Component: 200 - total flux cleaned = 0.000838714 Jy ! Total flux subtracted in 200 components = 0.000838714 Jy ! Clean residual min=-0.019711 max=0.022728 Jy/beam ! Clean residual mean=-0.000337 rms=0.005907 Jy/beam ! Combined flux in latest and established models = 0.552254 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.552254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170205Jy sigma=0.000669 ! Fit after self-cal, rms=0.170285Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170285Jy sigma=0.000669 ! Fit after self-cal, rms=0.169922Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=7.85 mas, bpa=7.855 degrees ! Estimated noise=5482.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813521 Jy ! Component: 100 - total flux cleaned = 0.000875394 Jy ! Component: 150 - total flux cleaned = 0.000936309 Jy ! Component: 200 - total flux cleaned = 0.00105013 Jy ! Total flux subtracted in 200 components = 0.00105013 Jy ! Clean residual min=-0.019806 max=0.022907 Jy/beam ! Clean residual mean=-0.000355 rms=0.005879 Jy/beam ! Combined flux in latest and established models = 0.553304 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.553304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169748Jy sigma=0.000669 ! Fit after self-cal, rms=0.169814Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531438 Jy ! Component: 100 - total flux cleaned = 0.000654956 Jy ! Component: 150 - total flux cleaned = 0.000654521 Jy ! Component: 200 - total flux cleaned = 0.000753265 Jy ! Total flux subtracted in 200 components = 0.000753265 Jy ! Clean residual min=-0.019710 max=0.022954 Jy/beam ! Clean residual mean=-0.000348 rms=0.005855 Jy/beam ! Combined flux in latest and established models = 0.554057 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.554057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169684Jy sigma=0.000669 ! Fit after self-cal, rms=0.169756Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169756Jy sigma=0.000669 ! Fit after self-cal, rms=0.169482Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.183 mas, bmaj=25.57 mas, bpa=13.72 degrees ! Estimated noise=7041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574127 Jy ! Component: 100 - total flux cleaned = 0.00619425 Jy ! Component: 150 - total flux cleaned = 0.00675502 Jy ! Component: 200 - total flux cleaned = 0.00714494 Jy ! Total flux subtracted in 200 components = 0.00714494 Jy ! Clean residual min=-0.021478 max=0.031797 Jy/beam ! Clean residual mean=-0.000622 rms=0.008932 Jy/beam ! Combined flux in latest and established models = 0.561202 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 50 components and 0.561202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169391Jy sigma=0.000670 ! Fit after self-cal, rms=0.169484Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142877 Jy ! Component: 100 - total flux cleaned = 0.00142942 Jy ! Component: 150 - total flux cleaned = 0.00142284 Jy ! Component: 200 - total flux cleaned = 0.00161862 Jy ! Total flux subtracted in 200 components = 0.00161862 Jy ! Clean residual min=-0.021267 max=0.031208 Jy/beam ! Clean residual mean=-0.000589 rms=0.008827 Jy/beam ! Combined flux in latest and established models = 0.562821 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.562821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169472Jy sigma=0.000671 ! Fit after self-cal, rms=0.169533Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.85 mas, bpa=8.006 degrees ! Estimated noise=5485.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.85 at 8.006 degrees (North through East) ! Clean map min=-0.01837 max=0.36597 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=6.559 mas, bpa=7.192 degrees ! Estimated noise=6443.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.306894 Jy ! Component: 100 - total flux cleaned = 0.39161 Jy ! Component: 150 - total flux cleaned = 0.439964 Jy ! Component: 200 - total flux cleaned = 0.473045 Jy ! Total flux subtracted in 200 components = 0.473045 Jy ! Clean residual min=-0.023224 max=0.021819 Jy/beam ! Clean residual mean=-0.000488 rms=0.006580 Jy/beam ! Combined flux in latest and established models = 0.473045 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.473045 Jy ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.85 mas, bpa=8.006 degrees ! Estimated noise=5485.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365258 Jy ! Component: 100 - total flux cleaned = 0.0557457 Jy ! Component: 150 - total flux cleaned = 0.0661004 Jy ! Component: 200 - total flux cleaned = 0.0717914 Jy ! Total flux subtracted in 200 components = 0.0717914 Jy ! Clean residual min=-0.020354 max=0.022494 Jy/beam ! Clean residual mean=-0.000455 rms=0.006070 Jy/beam ! Combined flux in latest and established models = 0.544836 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 39 components and 0.544836 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.183 mas, bmaj=25.57 mas, bpa=13.72 degrees ! Estimated noise=7041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100278 Jy ! Component: 100 - total flux cleaned = 0.0117229 Jy ! Component: 150 - total flux cleaned = 0.0122724 Jy ! Component: 200 - total flux cleaned = 0.0129446 Jy ! Total flux subtracted in 200 components = 0.0129446 Jy ! Clean residual min=-0.022450 max=0.033380 Jy/beam ! Clean residual mean=-0.000692 rms=0.009244 Jy/beam ! Combined flux in latest and established models = 0.557781 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466327 Jy ! Component: 100 - total flux cleaned = 0.00105872 Jy ! Component: 150 - total flux cleaned = 0.00148973 Jy ! Component: 200 - total flux cleaned = 0.00189407 Jy ! Total flux subtracted in 200 components = 0.00189407 Jy ! Clean residual min=-0.022068 max=0.032492 Jy/beam ! Clean residual mean=-0.000653 rms=0.009098 Jy/beam ! Combined flux in latest and established models = 0.559675 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.559675 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.85 mas, bpa=8.006 degrees ! Estimated noise=5485.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00468104 Jy ! Component: 100 - total flux cleaned = -0.00490045 Jy ! Component: 150 - total flux cleaned = -0.00473343 Jy ! Component: 200 - total flux cleaned = -0.00461719 Jy ! Total flux subtracted in 200 components = -0.00461719 Jy ! Clean residual min=-0.019560 max=0.023611 Jy/beam ! Clean residual mean=-0.000355 rms=0.005844 Jy/beam ! Combined flux in latest and established models = 0.555058 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.555058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169409Jy sigma=0.000669 ! Fit after self-cal, rms=0.169476Jy sigma=0.000669 wmodel J2247-3657_S_2017_02_24_pus_map.mod ! Writing 54 model components to file: J2247-3657_S_2017_02_24_pus_map.mod wobs J2247-3657_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2247-3657_S_2017_02_24_pus_uvs.fits wwins J2247-3657_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J2247-3657_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727904 Jy ! Component: 100 - total flux cleaned = 0.00865443 Jy ! Component: 150 - total flux cleaned = 0.00805969 Jy ! Component: 200 - total flux cleaned = 0.00724744 Jy ! Component: 250 - total flux cleaned = 0.00699541 Jy ! Component: 300 - total flux cleaned = 0.00748761 Jy ! Component: 350 - total flux cleaned = 0.00703211 Jy ! Component: 400 - total flux cleaned = 0.0063822 Jy ! Component: 450 - total flux cleaned = 0.00576718 Jy ! Component: 500 - total flux cleaned = 0.00497455 Jy ! Component: 550 - total flux cleaned = 0.00421464 Jy ! Component: 600 - total flux cleaned = 0.00403881 Jy ! Component: 650 - total flux cleaned = 0.00438693 Jy ! Component: 700 - total flux cleaned = 0.00472809 Jy ! Component: 750 - total flux cleaned = 0.00555801 Jy ! Component: 800 - total flux cleaned = 0.00572102 Jy ! Component: 850 - total flux cleaned = 0.00650719 Jy ! Component: 900 - total flux cleaned = 0.00666122 Jy ! Component: 950 - total flux cleaned = 0.00740927 Jy ! Component: 1000 - total flux cleaned = 0.00740743 Jy ! Component: 1050 - total flux cleaned = 0.00769468 Jy ! Component: 1100 - total flux cleaned = 0.00853536 Jy ! Component: 1150 - total flux cleaned = 0.00894188 Jy ! Component: 1200 - total flux cleaned = 0.00907456 Jy ! Component: 1250 - total flux cleaned = 0.00933666 Jy ! Component: 1300 - total flux cleaned = 0.00972637 Jy ! Component: 1350 - total flux cleaned = 0.0103609 Jy ! Component: 1400 - total flux cleaned = 0.0107344 Jy ! Component: 1450 - total flux cleaned = 0.0112242 Jy ! Component: 1500 - total flux cleaned = 0.011822 Jy ! Component: 1550 - total flux cleaned = 0.0121737 Jy ! Component: 1600 - total flux cleaned = 0.0120581 Jy ! Component: 1650 - total flux cleaned = 0.0126296 Jy ! Component: 1700 - total flux cleaned = 0.0125166 Jy ! Component: 1750 - total flux cleaned = 0.0127375 Jy ! Component: 1800 - total flux cleaned = 0.0125196 Jy ! Component: 1850 - total flux cleaned = 0.0125216 Jy ! Component: 1900 - total flux cleaned = 0.0122042 Jy ! Component: 1950 - total flux cleaned = 0.0126199 Jy ! Component: 2000 - total flux cleaned = 0.012515 Jy ! Component: 2050 - total flux cleaned = 0.0125155 Jy ! Component: 2100 - total flux cleaned = 0.0125141 Jy ! Component: 2150 - total flux cleaned = 0.0124151 Jy ! Component: 2200 - total flux cleaned = 0.0122212 Jy ! Component: 2250 - total flux cleaned = 0.0127007 Jy ! Component: 2300 - total flux cleaned = 0.0126053 Jy ! Component: 2350 - total flux cleaned = 0.012607 Jy ! Component: 2400 - total flux cleaned = 0.0126993 Jy ! Component: 2450 - total flux cleaned = 0.012331 Jy ! Component: 2500 - total flux cleaned = 0.0123321 Jy ! Component: 2550 - total flux cleaned = 0.0121516 Jy ! Component: 2600 - total flux cleaned = 0.0118822 Jy ! Component: 2650 - total flux cleaned = 0.0118823 Jy ! Component: 2700 - total flux cleaned = 0.0118828 Jy ! Component: 2750 - total flux cleaned = 0.0117063 Jy ! Component: 2800 - total flux cleaned = 0.0117064 Jy ! Component: 2850 - total flux cleaned = 0.0116188 Jy ! Component: 2900 - total flux cleaned = 0.0113592 Jy ! Component: 2950 - total flux cleaned = 0.0114452 Jy ! Component: 3000 - total flux cleaned = 0.0111018 Jy ! Component: 3050 - total flux cleaned = 0.010846 Jy ! Component: 3100 - total flux cleaned = 0.0106761 Jy ! Component: 3150 - total flux cleaned = 0.010507 Jy ! Component: 3200 - total flux cleaned = 0.010423 Jy ! Component: 3250 - total flux cleaned = 0.0102554 Jy ! Component: 3300 - total flux cleaned = 0.0102549 Jy ! Component: 3350 - total flux cleaned = 0.010255 Jy ! Component: 3400 - total flux cleaned = 0.0103386 Jy ! Component: 3450 - total flux cleaned = 0.0100876 Jy ! Component: 3500 - total flux cleaned = 0.00983667 Jy ! Component: 3550 - total flux cleaned = 0.00975292 Jy ! Component: 3600 - total flux cleaned = 0.00966969 Jy ! Component: 3650 - total flux cleaned = 0.00941883 Jy ! Component: 3700 - total flux cleaned = 0.00941872 Jy ! Component: 3750 - total flux cleaned = 0.00916817 Jy ! Component: 3800 - total flux cleaned = 0.00891679 Jy ! Component: 3850 - total flux cleaned = 0.00866501 Jy ! Component: 3900 - total flux cleaned = 0.00849677 Jy ! Component: 3950 - total flux cleaned = 0.00824445 Jy ! Component: 4000 - total flux cleaned = 0.00807569 Jy ! Component: 4050 - total flux cleaned = 0.00799114 Jy ! Total flux subtracted in 4096 components = 0.00773807 Jy ! Clean residual min=-0.005037 max=0.005087 Jy/beam ! Clean residual mean=-0.000012 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.562796 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 290 components and 0.562796 Jy ![Exited script file: muppet] wmap "J2247-3657_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.85 at 8.006 degrees (North through East) ! Clean map min=-0.0137 max=0.37592 Jy/beam ! Writing clean map to FITS file: J2247-3657_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.375924 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00163553 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30521 1.30521 2.61042 5.22085 10.4417 20.8834 41.7668 83.5336 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0049 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.375 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.85 at 8.006 degrees (North through East) ! Clean map min=-0.0137 max=0.37592 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2247-3657_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:37:06 2019