! Started logfile: J2247-3657_S_2017_01_21_pus_uvs.log on Sun May 5 16:05:40 2019 obs J2247-3657_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2247-3657_S_2017_01_21_pus_uva.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.549383 visibilities/baseline/integration-bin. ! Found source: J2247-3657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2247-3657_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.798083Jy sigma=0.003471 ! Fit after self-cal, rms=0.724777Jy sigma=0.003323 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=5.993 mas, bpa=2.451 degrees ! Estimated noise=6194.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216684 Jy ! Component: 100 - total flux cleaned = 0.272634 Jy ! Total flux subtracted in 100 components = 0.272634 Jy ! Clean residual min=-0.032958 max=0.041804 Jy/beam ! Clean residual mean=-0.002317 rms=0.011791 Jy/beam ! Combined flux in latest and established models = 0.272635 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.272635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219351Jy sigma=0.000973 ! Fit after self-cal, rms=0.219275Jy sigma=0.000973 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.773 mas, bpa=2.866 degrees ! Estimated noise=4886.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661278 Jy ! Component: 100 - total flux cleaned = 0.101227 Jy ! Component: 150 - total flux cleaned = 0.120507 Jy ! Component: 200 - total flux cleaned = 0.131303 Jy ! Total flux subtracted in 200 components = 0.131303 Jy ! Clean residual min=-0.040143 max=0.056029 Jy/beam ! Clean residual mean=-0.003950 rms=0.017498 Jy/beam ! Combined flux in latest and established models = 0.403937 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.403937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209330Jy sigma=0.000820 ! Fit after self-cal, rms=0.208924Jy sigma=0.000819 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 1.00* LA 0.85 ! MK 1.04 NL 1.00* OV 1.90 PT 0.84 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* LA 0.85 ! MK 1.08 NL 1.74 OV 1.73 PT 0.84 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* LA 0.82 ! MK 1.10 NL 1.40 OV 1.91 PT 0.83 ! SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* LA 0.75 ! MK 1.14 NL 1.00* OV 2.12 PT 0.83 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.208924Jy sigma=0.000819 ! Fit after self-cal, rms=0.305829Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.537 mas, bmaj=6.842 mas, bpa=3.053 degrees ! Estimated noise=4953.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303032 Jy ! Component: 100 - total flux cleaned = 0.0330141 Jy ! Component: 150 - total flux cleaned = 0.031821 Jy ! Component: 200 - total flux cleaned = 0.0314963 Jy ! Total flux subtracted in 200 components = 0.0314963 Jy ! Clean residual min=-0.015991 max=0.017498 Jy/beam ! Clean residual mean=0.000289 rms=0.004152 Jy/beam ! Combined flux in latest and established models = 0.435434 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.435434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300174Jy sigma=0.000663 ! Fit after self-cal, rms=0.302916Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302916Jy sigma=0.000660 ! Fit after self-cal, rms=0.296107Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=6.787 mas, bpa=3.112 degrees ! Estimated noise=4856.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903457 Jy ! Component: 100 - total flux cleaned = 0.00734694 Jy ! Component: 150 - total flux cleaned = 0.00661477 Jy ! Component: 200 - total flux cleaned = 0.0068218 Jy ! Total flux subtracted in 200 components = 0.0068218 Jy ! Clean residual min=-0.012766 max=0.015031 Jy/beam ! Clean residual mean=0.000118 rms=0.003598 Jy/beam ! Combined flux in latest and established models = 0.442256 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.442256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294623Jy sigma=0.000655 ! Fit after self-cal, rms=0.294375Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-94.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128573 Jy ! Component: 100 - total flux cleaned = 0.0200058 Jy ! Component: 150 - total flux cleaned = 0.0255185 Jy ! Component: 200 - total flux cleaned = 0.027241 Jy ! Total flux subtracted in 200 components = 0.027241 Jy ! Clean residual min=-0.012955 max=0.012157 Jy/beam ! Clean residual mean=-0.000014 rms=0.003204 Jy/beam ! Combined flux in latest and established models = 0.469497 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.469497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292773Jy sigma=0.000651 ! Fit after self-cal, rms=0.292528Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292528Jy sigma=0.000650 ! Fit after self-cal, rms=0.289520Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.775 mas, bpa=3.075 degrees ! Estimated noise=4821.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648773 Jy ! Component: 100 - total flux cleaned = 0.0115968 Jy ! Component: 150 - total flux cleaned = 0.0144117 Jy ! Component: 200 - total flux cleaned = 0.0160008 Jy ! Total flux subtracted in 200 components = 0.0160008 Jy ! Clean residual min=-0.012158 max=0.012136 Jy/beam ! Clean residual mean=0.000026 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.485497 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 85 components and 0.485497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288712Jy sigma=0.000641 ! Fit after self-cal, rms=0.288721Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481975 Jy ! Component: 100 - total flux cleaned = 0.00657194 Jy ! Component: 150 - total flux cleaned = 0.00785157 Jy ! Component: 200 - total flux cleaned = 0.00890309 Jy ! Total flux subtracted in 200 components = 0.00890309 Jy ! Clean residual min=-0.011904 max=0.011904 Jy/beam ! Clean residual mean=0.000060 rms=0.002850 Jy/beam ! Combined flux in latest and established models = 0.494401 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.494401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288195Jy sigma=0.000641 ! Fit after self-cal, rms=0.288160Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288160Jy sigma=0.000640 ! Fit after self-cal, rms=0.285662Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.112 mas, bmaj=23.07 mas, bpa=8.464 degrees ! Estimated noise=7203.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628355 Jy ! Component: 100 - total flux cleaned = 0.0103787 Jy ! Component: 150 - total flux cleaned = 0.0136795 Jy ! Component: 200 - total flux cleaned = 0.0165782 Jy ! Total flux subtracted in 200 components = 0.0165782 Jy ! Clean residual min=-0.011899 max=0.012904 Jy/beam ! Clean residual mean=0.000227 rms=0.004514 Jy/beam ! Combined flux in latest and established models = 0.510979 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.510979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285175Jy sigma=0.000639 ! Fit after self-cal, rms=0.285056Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421933 Jy ! Component: 100 - total flux cleaned = 0.00724704 Jy ! Component: 150 - total flux cleaned = 0.00907697 Jy ! Component: 200 - total flux cleaned = 0.01001 Jy ! Total flux subtracted in 200 components = 0.01001 Jy ! Clean residual min=-0.012306 max=0.012992 Jy/beam ! Clean residual mean=0.000252 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 0.520989 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.520989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284739Jy sigma=0.000639 ! Fit after self-cal, rms=0.284660Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.765 mas, bpa=3.099 degrees ! Estimated noise=4798.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 6.765 at 3.099 degrees (North through East) ! Clean map min=-0.010885 max=0.32245 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=5.947 mas, bpa=2.814 degrees ! Estimated noise=6282.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218458 Jy ! Component: 100 - total flux cleaned = 0.279637 Jy ! Component: 150 - total flux cleaned = 0.31824 Jy ! Component: 200 - total flux cleaned = 0.347841 Jy ! Total flux subtracted in 200 components = 0.347841 Jy ! Clean residual min=-0.024503 max=0.024309 Jy/beam ! Clean residual mean=-0.000889 rms=0.006836 Jy/beam ! Combined flux in latest and established models = 0.347841 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.347841 Jy ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.765 mas, bpa=3.099 degrees ! Estimated noise=4798.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402226 Jy ! Component: 100 - total flux cleaned = 0.0640243 Jy ! Component: 150 - total flux cleaned = 0.0800918 Jy ! Component: 200 - total flux cleaned = 0.0928975 Jy ! Total flux subtracted in 200 components = 0.0928975 Jy ! Clean residual min=-0.015385 max=0.012423 Jy/beam ! Clean residual mean=-0.000443 rms=0.003980 Jy/beam ! Combined flux in latest and established models = 0.440738 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 61 components and 0.440738 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.112 mas, bmaj=23.07 mas, bpa=8.464 degrees ! Estimated noise=7203.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181615 Jy ! Component: 100 - total flux cleaned = 0.0300469 Jy ! Component: 150 - total flux cleaned = 0.0389632 Jy ! Component: 200 - total flux cleaned = 0.0459385 Jy ! Total flux subtracted in 200 components = 0.0459385 Jy ! Clean residual min=-0.011290 max=0.012308 Jy/beam ! Clean residual mean=0.000072 rms=0.004114 Jy/beam ! Combined flux in latest and established models = 0.486677 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586711 Jy ! Component: 100 - total flux cleaned = 0.0109675 Jy ! Component: 150 - total flux cleaned = 0.0154799 Jy ! Component: 200 - total flux cleaned = 0.01948 Jy ! Total flux subtracted in 200 components = 0.01948 Jy ! Clean residual min=-0.012425 max=0.013681 Jy/beam ! Clean residual mean=0.000184 rms=0.004424 Jy/beam ! Combined flux in latest and established models = 0.506157 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 100 components and 0.506157 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.765 mas, bpa=3.099 degrees ! Estimated noise=4798.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314248 Jy ! Component: 100 - total flux cleaned = 0.00386394 Jy ! Component: 150 - total flux cleaned = 0.00464855 Jy ! Component: 200 - total flux cleaned = 0.00531167 Jy ! Total flux subtracted in 200 components = 0.00531167 Jy ! Clean residual min=-0.011669 max=0.011391 Jy/beam ! Clean residual mean=0.000099 rms=0.002904 Jy/beam ! Combined flux in latest and established models = 0.511469 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.511469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284742Jy sigma=0.000639 ! Fit after self-cal, rms=0.285103Jy sigma=0.000639 wmodel J2247-3657_S_2017_01_21_pus_map.mod ! Writing 119 model components to file: J2247-3657_S_2017_01_21_pus_map.mod wobs J2247-3657_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2247-3657_S_2017_01_21_pus_uvs.fits wwins J2247-3657_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J2247-3657_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000936624 Jy ! Component: 100 - total flux cleaned = -0.000574223 Jy ! Component: 150 - total flux cleaned = -0.0017243 Jy ! Component: 200 - total flux cleaned = -0.00359602 Jy ! Component: 250 - total flux cleaned = -0.00463522 Jy ! Component: 300 - total flux cleaned = -0.00564318 Jy ! Component: 350 - total flux cleaned = -0.00633605 Jy ! Component: 400 - total flux cleaned = -0.00713812 Jy ! Component: 450 - total flux cleaned = -0.00830406 Jy ! Component: 500 - total flux cleaned = -0.00943684 Jy ! Component: 550 - total flux cleaned = -0.0110281 Jy ! Component: 600 - total flux cleaned = -0.0124629 Jy ! Component: 650 - total flux cleaned = -0.0139841 Jy ! Component: 700 - total flux cleaned = -0.0155857 Jy ! Component: 750 - total flux cleaned = -0.0165933 Jy ! Component: 800 - total flux cleaned = -0.0175836 Jy ! Component: 850 - total flux cleaned = -0.0189864 Jy ! Component: 900 - total flux cleaned = -0.0199388 Jy ! Component: 950 - total flux cleaned = -0.021186 Jy ! Component: 1000 - total flux cleaned = -0.0223077 Jy ! Component: 1050 - total flux cleaned = -0.0233109 Jy ! Component: 1100 - total flux cleaned = -0.0242974 Jy ! Component: 1150 - total flux cleaned = -0.0253667 Jy ! Component: 1200 - total flux cleaned = -0.0265167 Jy ! Component: 1250 - total flux cleaned = -0.0277478 Jy ! Component: 1300 - total flux cleaned = -0.0290561 Jy ! Component: 1350 - total flux cleaned = -0.0303481 Jy ! Component: 1400 - total flux cleaned = -0.0317143 Jy ! Component: 1450 - total flux cleaned = -0.0327049 Jy ! Component: 1500 - total flux cleaned = -0.0336861 Jy ! Component: 1550 - total flux cleaned = -0.0346592 Jy ! Component: 1600 - total flux cleaned = -0.0359762 Jy ! Component: 1650 - total flux cleaned = -0.0373725 Jy ! Component: 1700 - total flux cleaned = -0.0385869 Jy ! Component: 1750 - total flux cleaned = -0.0397091 Jy ! Component: 1800 - total flux cleaned = -0.0410839 Jy ! Component: 1850 - total flux cleaned = -0.0424524 Jy ! Component: 1900 - total flux cleaned = -0.0439005 Jy ! Component: 1950 - total flux cleaned = -0.045258 Jy ! Component: 2000 - total flux cleaned = -0.0466954 Jy ! Component: 2050 - total flux cleaned = -0.0478758 Jy ! Component: 2100 - total flux cleaned = -0.0492213 Jy ! Component: 2150 - total flux cleaned = -0.050647 Jy ! Component: 2200 - total flux cleaned = -0.051902 Jy ! Component: 2250 - total flux cleaned = -0.0530707 Jy ! Component: 2300 - total flux cleaned = -0.0545728 Jy ! Component: 2350 - total flux cleaned = -0.0559081 Jy ! Component: 2400 - total flux cleaned = -0.057412 Jy ! Component: 2450 - total flux cleaned = -0.0587526 Jy ! Component: 2500 - total flux cleaned = -0.0600995 Jy ! Component: 2550 - total flux cleaned = -0.0613693 Jy ! Component: 2600 - total flux cleaned = -0.062732 Jy ! Component: 2650 - total flux cleaned = -0.0641034 Jy ! Component: 2700 - total flux cleaned = -0.0654831 Jy ! Component: 2750 - total flux cleaned = -0.0668722 Jy ! Component: 2800 - total flux cleaned = -0.0683578 Jy ! Component: 2850 - total flux cleaned = -0.0697668 Jy ! Component: 2900 - total flux cleaned = -0.0711859 Jy ! Component: 2950 - total flux cleaned = -0.0727948 Jy ! Component: 3000 - total flux cleaned = -0.0742365 Jy ! Component: 3050 - total flux cleaned = -0.0758723 Jy ! Component: 3100 - total flux cleaned = -0.0775224 Jy ! Component: 3150 - total flux cleaned = -0.0790956 Jy ! Component: 3200 - total flux cleaned = -0.0807775 Jy ! Component: 3250 - total flux cleaned = -0.0825696 Jy ! Component: 3300 - total flux cleaned = -0.0841904 Jy ! Component: 3350 - total flux cleaned = -0.086021 Jy ! Component: 3400 - total flux cleaned = -0.0877728 Jy ! Component: 3450 - total flux cleaned = -0.0897411 Jy ! Component: 3500 - total flux cleaned = -0.0916315 Jy ! Component: 3550 - total flux cleaned = -0.0935429 Jy ! Component: 3600 - total flux cleaned = -0.0954758 Jy ! Component: 3650 - total flux cleaned = -0.0975352 Jy ! Component: 3700 - total flux cleaned = -0.0992035 Jy ! Component: 3750 - total flux cleaned = -0.101 Jy ! Component: 3800 - total flux cleaned = -0.102609 Jy ! Component: 3850 - total flux cleaned = -0.104243 Jy ! Component: 3900 - total flux cleaned = -0.106017 Jy ! Component: 3950 - total flux cleaned = -0.107593 Jy ! Component: 4000 - total flux cleaned = -0.109426 Jy ! Component: 4050 - total flux cleaned = -0.111061 Jy ! Total flux subtracted in 4096 components = -0.112606 Jy ! Clean residual min=-0.006528 max=0.007705 Jy/beam ! Clean residual mean=-0.000227 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 0.398862 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 386 components and 0.398862 Jy ![Exited script file: muppet] wmap "J2247-3657_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 6.765 at 3.099 degrees (North through East) ! Clean map min=-0.010807 max=0.31605 Jy/beam ! Writing clean map to FITS file: J2247-3657_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.31605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00180634 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.71461 1.71461 3.42923 6.85845 13.7169 27.4338 54.8676 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0054 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.316 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 6.765 at 3.099 degrees (North through East) ! Clean map min=-0.010807 max=0.31605 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2247-3657_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:05:45 2019