! Started logfile: J2245-0755_S_2017_05_27_pus_uvs.log on Fri May 3 11:15:57 2019 obs J2245-0755_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2245-0755_S_2017_05_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97284 visibilities/baseline/integration-bin. ! Found source: J2245-0755 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 25216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2245-0755_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894009Jy sigma=0.014338 ! Fit after self-cal, rms=0.885844Jy sigma=0.014293 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=7.095 mas, bpa=-3.568 degrees ! Estimated noise=862.981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765913 Jy ! Component: 100 - total flux cleaned = 0.0960081 Jy ! Total flux subtracted in 100 components = 0.0960081 Jy ! Clean residual min=-0.011062 max=0.022844 Jy/beam ! Clean residual mean=-0.000005 rms=0.004006 Jy/beam ! Combined flux in latest and established models = 0.0960081 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0960081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105010Jy sigma=0.001238 ! Fit after self-cal, rms=0.105009Jy sigma=0.001238 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=8.018 mas, bpa=-4.179 degrees ! Estimated noise=637.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181276 Jy ! Component: 100 - total flux cleaned = 0.0230143 Jy ! Component: 150 - total flux cleaned = 0.0245433 Jy ! Component: 200 - total flux cleaned = 0.0255319 Jy ! Total flux subtracted in 200 components = 0.0255319 Jy ! Clean residual min=-0.005808 max=0.009966 Jy/beam ! Clean residual mean=-0.000003 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.12154 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 18 components and 0.12154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102126Jy sigma=0.001124 ! Fit after self-cal, rms=0.101804Jy sigma=0.001122 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 14.42 FD 0.85 HN 0.99 KP 0.99 ! LA 0.96 MK 1.03 NL 0.96 OV 0.99 ! PT 1.07 SC 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.05 KP 0.99 ! LA 0.95 MK 0.98 NL 0.99 OV 0.98 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.02 KP 0.99 ! LA 0.99 MK 1.02 NL 0.98 OV 0.91 ! PT 0.99 SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00 KP 1.00* ! LA 0.90 MK 1.10 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.101804Jy sigma=0.001122 ! Fit after self-cal, rms=0.682938Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.242 mas, bpa=-3.992 degrees ! Estimated noise=681.143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957434 Jy ! Component: 100 - total flux cleaned = 0.000549872 Jy ! Component: 150 - total flux cleaned = 0.000556342 Jy ! Component: 200 - total flux cleaned = 0.000556315 Jy ! Total flux subtracted in 200 components = 0.000556315 Jy ! Clean residual min=-0.006708 max=0.003383 Jy/beam ! Clean residual mean=0.000002 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.122096 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.122096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.680775Jy sigma=0.000694 ! Fit after self-cal, rms=0.680910Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.680910Jy sigma=0.000687 ! Fit after self-cal, rms=1.240265Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=8.277 mas, bpa=-4.159 degrees ! Estimated noise=689.705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165948 Jy ! Component: 100 - total flux cleaned = 0.00199875 Jy ! Component: 150 - total flux cleaned = 0.00215052 Jy ! Component: 200 - total flux cleaned = 0.00200349 Jy ! Total flux subtracted in 200 components = 0.00200349 Jy ! Clean residual min=-0.005184 max=0.002785 Jy/beam ! Clean residual mean=0.000002 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.1241 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.1241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.238703Jy sigma=0.000683 ! Fit after self-cal, rms=1.238693Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047055 Jy ! Component: 100 - total flux cleaned = 0.000112357 Jy ! Component: 150 - total flux cleaned = 0.00011346 Jy ! Component: 200 - total flux cleaned = 0.000106967 Jy ! Total flux subtracted in 200 components = 0.000106967 Jy ! Clean residual min=-0.004954 max=0.002839 Jy/beam ! Clean residual mean=0.000002 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.124207 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.124207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.237430Jy sigma=0.000683 ! Fit after self-cal, rms=1.237428Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.237428Jy sigma=0.000683 ! Fit after self-cal, rms=1.492945Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.282 mas, bpa=-4.211 degrees ! Estimated noise=688.535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405751 Jy ! Component: 100 - total flux cleaned = 0.000269765 Jy ! Component: 150 - total flux cleaned = 0.000335775 Jy ! Component: 200 - total flux cleaned = 0.000275511 Jy ! Total flux subtracted in 200 components = 0.000275511 Jy ! Clean residual min=-0.002265 max=0.002242 Jy/beam ! Clean residual mean=0.000000 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.124482 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.124482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492560Jy sigma=0.000671 ! Fit after self-cal, rms=1.492558Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07028e-05 Jy ! Component: 100 - total flux cleaned = 4.00412e-05 Jy ! Component: 150 - total flux cleaned = 4.14715e-05 Jy ! Component: 200 - total flux cleaned = 4.20076e-05 Jy ! Total flux subtracted in 200 components = 4.20076e-05 Jy ! Clean residual min=-0.002312 max=0.002237 Jy/beam ! Clean residual mean=0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.124524 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.124524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492227Jy sigma=0.000671 ! Fit after self-cal, rms=1.492227Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492227Jy sigma=0.000671 ! Fit after self-cal, rms=1.643643Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.411 mas, bmaj=15.48 mas, bpa=-4.8 degrees ! Estimated noise=891.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000738447 Jy ! Component: 100 - total flux cleaned = 0.000519991 Jy ! Component: 150 - total flux cleaned = 0.000382385 Jy ! Component: 200 - total flux cleaned = 0.000192533 Jy ! Total flux subtracted in 200 components = 0.000192533 Jy ! Clean residual min=-0.002328 max=0.002680 Jy/beam ! Clean residual mean=0.000000 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.124717 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.124717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.643231Jy sigma=0.000671 ! Fit after self-cal, rms=1.643231Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185509 Jy ! Component: 100 - total flux cleaned = -0.000358462 Jy ! Component: 150 - total flux cleaned = -0.000466675 Jy ! Component: 200 - total flux cleaned = -0.000519018 Jy ! Total flux subtracted in 200 components = -0.000519018 Jy ! Clean residual min=-0.002400 max=0.002784 Jy/beam ! Clean residual mean=0.000001 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.124198 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.124198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.642932Jy sigma=0.000671 ! Fit after self-cal, rms=1.642933Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.305 mas, bpa=-4.362 degrees ! Estimated noise=693.773 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 8.305 at -4.362 degrees (North through East) ! Clean map min=-0.0074518 max=0.12183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=7.14 mas, bpa=-4.138 degrees ! Estimated noise=1044.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0931365 Jy ! Component: 100 - total flux cleaned = 0.113485 Jy ! Component: 150 - total flux cleaned = 0.119549 Jy ! Component: 200 - total flux cleaned = 0.119931 Jy ! Total flux subtracted in 200 components = 0.119931 Jy ! Clean residual min=-0.003601 max=0.003405 Jy/beam ! Clean residual mean=0.000000 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.119931 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.119931 Jy ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.305 mas, bpa=-4.362 degrees ! Estimated noise=693.773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213 Jy ! Component: 100 - total flux cleaned = 0.00262311 Jy ! Component: 150 - total flux cleaned = 0.00305385 Jy ! Component: 200 - total flux cleaned = 0.00344137 Jy ! Total flux subtracted in 200 components = 0.00344137 Jy ! Clean residual min=-0.002162 max=0.002273 Jy/beam ! Clean residual mean=0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.123372 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.123372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.411 mas, bmaj=15.48 mas, bpa=-4.8 degrees ! Estimated noise=891.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442519 Jy ! Component: 100 - total flux cleaned = 0.000311468 Jy ! Component: 150 - total flux cleaned = 0.000130294 Jy ! Component: 200 - total flux cleaned = 7.3062e-05 Jy ! Total flux subtracted in 200 components = 7.3062e-05 Jy ! Clean residual min=-0.002434 max=0.002746 Jy/beam ! Clean residual mean=0.000001 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.123445 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.22147e-06 Jy ! Component: 100 - total flux cleaned = 5.29622e-05 Jy ! Component: 150 - total flux cleaned = 5.24645e-05 Jy ! Component: 200 - total flux cleaned = 9.89694e-05 Jy ! Total flux subtracted in 200 components = 9.89694e-05 Jy ! Clean residual min=-0.002475 max=0.002793 Jy/beam ! Clean residual mean=0.000001 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.123544 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.123544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.305 mas, bpa=-4.362 degrees ! Estimated noise=693.773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.73641e-05 Jy ! Component: 100 - total flux cleaned = 0.000186086 Jy ! Component: 150 - total flux cleaned = 0.000385069 Jy ! Component: 200 - total flux cleaned = 0.000567523 Jy ! Total flux subtracted in 200 components = 0.000567523 Jy ! Clean residual min=-0.002177 max=0.002411 Jy/beam ! Clean residual mean=0.000000 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.124111 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.124111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.642484Jy sigma=0.000671 ! Fit after self-cal, rms=1.642470Jy sigma=0.000671 wmodel J2245-0755_S_2017_05_27_pus_map.mod ! Writing 64 model components to file: J2245-0755_S_2017_05_27_pus_map.mod wobs J2245-0755_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2245-0755_S_2017_05_27_pus_uvs.fits wwins J2245-0755_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J2245-0755_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108335 Jy ! Component: 100 - total flux cleaned = 2.8255e-05 Jy ! Component: 150 - total flux cleaned = 0.000102799 Jy ! Component: 200 - total flux cleaned = 0.00021112 Jy ! Component: 250 - total flux cleaned = 0.000455944 Jy ! Component: 300 - total flux cleaned = 0.000626502 Jy ! Component: 350 - total flux cleaned = 0.00066007 Jy ! Component: 400 - total flux cleaned = 0.000692485 Jy ! Component: 450 - total flux cleaned = 0.000660083 Jy ! Component: 500 - total flux cleaned = 0.000787683 Jy ! Component: 550 - total flux cleaned = 0.000787797 Jy ! Component: 600 - total flux cleaned = 0.000881105 Jy ! Component: 650 - total flux cleaned = 0.000881723 Jy ! Component: 700 - total flux cleaned = 0.000973295 Jy ! Component: 750 - total flux cleaned = 0.00106366 Jy ! Component: 800 - total flux cleaned = 0.00100464 Jy ! Component: 850 - total flux cleaned = 0.00103443 Jy ! Component: 900 - total flux cleaned = 0.00106367 Jy ! Component: 950 - total flux cleaned = 0.00106352 Jy ! Component: 1000 - total flux cleaned = 0.0010923 Jy ! Component: 1050 - total flux cleaned = 0.00114941 Jy ! Component: 1100 - total flux cleaned = 0.00112109 Jy ! Component: 1150 - total flux cleaned = 0.0012338 Jy ! Component: 1200 - total flux cleaned = 0.00120586 Jy ! Component: 1250 - total flux cleaned = 0.00123376 Jy ! Component: 1300 - total flux cleaned = 0.00126123 Jy ! Component: 1350 - total flux cleaned = 0.00123383 Jy ! Component: 1400 - total flux cleaned = 0.00126115 Jy ! Component: 1450 - total flux cleaned = 0.00123399 Jy ! Component: 1500 - total flux cleaned = 0.00128788 Jy ! Component: 1550 - total flux cleaned = 0.00120747 Jy ! Component: 1600 - total flux cleaned = 0.00123429 Jy ! Component: 1650 - total flux cleaned = 0.00128728 Jy ! Component: 1700 - total flux cleaned = 0.00131345 Jy ! Component: 1750 - total flux cleaned = 0.00123481 Jy ! Component: 1800 - total flux cleaned = 0.00128718 Jy ! Component: 1850 - total flux cleaned = 0.00123507 Jy ! Component: 1900 - total flux cleaned = 0.00131274 Jy ! Component: 1950 - total flux cleaned = 0.00133857 Jy ! Component: 2000 - total flux cleaned = 0.00138991 Jy ! Component: 2050 - total flux cleaned = 0.00141548 Jy ! Component: 2100 - total flux cleaned = 0.00146656 Jy ! Component: 2150 - total flux cleaned = 0.00149179 Jy ! Component: 2200 - total flux cleaned = 0.00146663 Jy ! Component: 2250 - total flux cleaned = 0.00154221 Jy ! Component: 2300 - total flux cleaned = 0.00164237 Jy ! Component: 2350 - total flux cleaned = 0.00166734 Jy ! Component: 2400 - total flux cleaned = 0.00166717 Jy ! Component: 2450 - total flux cleaned = 0.00164247 Jy ! Component: 2500 - total flux cleaned = 0.00171678 Jy ! Component: 2550 - total flux cleaned = 0.0017908 Jy ! Component: 2600 - total flux cleaned = 0.0017661 Jy ! Component: 2650 - total flux cleaned = 0.00176621 Jy ! Component: 2700 - total flux cleaned = 0.00179077 Jy ! Component: 2750 - total flux cleaned = 0.00179086 Jy ! Component: 2800 - total flux cleaned = 0.00183953 Jy ! Component: 2850 - total flux cleaned = 0.00183946 Jy ! Component: 2900 - total flux cleaned = 0.00186363 Jy ! Component: 2950 - total flux cleaned = 0.00191211 Jy ! Component: 3000 - total flux cleaned = 0.00191221 Jy ! Component: 3050 - total flux cleaned = 0.00191232 Jy ! Component: 3100 - total flux cleaned = 0.00193634 Jy ! Component: 3150 - total flux cleaned = 0.00191246 Jy ! Component: 3200 - total flux cleaned = 0.00188854 Jy ! Component: 3250 - total flux cleaned = 0.00196011 Jy ! Component: 3300 - total flux cleaned = 0.00198397 Jy ! Component: 3350 - total flux cleaned = 0.00198396 Jy ! Component: 3400 - total flux cleaned = 0.00193657 Jy ! Component: 3450 - total flux cleaned = 0.00196039 Jy ! Component: 3500 - total flux cleaned = 0.00198407 Jy ! Component: 3550 - total flux cleaned = 0.00191333 Jy ! Component: 3600 - total flux cleaned = 0.00193688 Jy ! Component: 3650 - total flux cleaned = 0.00200729 Jy ! Component: 3700 - total flux cleaned = 0.00198374 Jy ! Component: 3750 - total flux cleaned = 0.0020539 Jy ! Component: 3800 - total flux cleaned = 0.00203046 Jy ! Component: 3850 - total flux cleaned = 0.00203041 Jy ! Component: 3900 - total flux cleaned = 0.00200707 Jy ! Component: 3950 - total flux cleaned = 0.00200699 Jy ! Component: 4000 - total flux cleaned = 0.00207657 Jy ! Component: 4050 - total flux cleaned = 0.00205342 Jy ! Total flux subtracted in 4096 components = 0.00212287 Jy ! Clean residual min=-0.001387 max=0.001235 Jy/beam ! Clean residual mean=-0.000000 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.126234 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 352 components and 0.126234 Jy ![Exited script file: muppet] wmap "J2245-0755_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 8.305 at -4.362 degrees (North through East) ! Clean map min=-0.0076805 max=0.12503 Jy/beam ! Writing clean map to FITS file: J2245-0755_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125029 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000446111 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07041 1.07041 2.14083 4.28166 8.56332 17.1266 34.2533 68.5065 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 8.305 at -4.362 degrees (North through East) ! Clean map min=-0.0076805 max=0.12503 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2245-0755_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:16:01 2019