! Started logfile: J2243-2544_S_2017_08_05_pus_uvs.log on Thu May 9 19:41:04 2019 obs J2243-2544_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2243-2544_S_2017_08_05_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96462 visibilities/baseline/integration-bin. ! Found source: J2243-2544 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 13196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2243-2544_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.760243Jy sigma=0.005522 ! Fit after self-cal, rms=0.739411Jy sigma=0.005364 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=7.034 mas, bpa=-7.057 degrees ! Estimated noise=1486.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201287 Jy ! Component: 100 - total flux cleaned = 0.268992 Jy ! Total flux subtracted in 100 components = 0.268992 Jy ! Clean residual min=-0.016838 max=0.036476 Jy/beam ! Clean residual mean=-0.000218 rms=0.005235 Jy/beam ! Combined flux in latest and established models = 0.268992 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.268992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140660Jy sigma=0.000962 ! Fit after self-cal, rms=0.140363Jy sigma=0.000961 ! Inverting map ! Added new window around map position (4.5, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380687 Jy ! Component: 100 - total flux cleaned = 0.0626045 Jy ! Total flux subtracted in 100 components = 0.0626045 Jy ! Clean residual min=-0.013940 max=0.024320 Jy/beam ! Clean residual mean=-0.000156 rms=0.003924 Jy/beam ! Combined flux in latest and established models = 0.331596 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.331596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124176Jy sigma=0.000830 ! Fit after self-cal, rms=0.123738Jy sigma=0.000826 ! Inverting map ! Added new window around map position (8.5, -11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236929 Jy ! Component: 100 - total flux cleaned = 0.0400587 Jy ! Total flux subtracted in 100 components = 0.0400587 Jy ! Clean residual min=-0.011105 max=0.018468 Jy/beam ! Clean residual mean=-0.000121 rms=0.003135 Jy/beam ! Combined flux in latest and established models = 0.371655 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.371655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116871Jy sigma=0.000775 ! Fit after self-cal, rms=0.116387Jy sigma=0.000770 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.016 mas, bpa=-5.103 degrees ! Estimated noise=1033.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207483 Jy ! Component: 100 - total flux cleaned = 0.0341889 Jy ! Component: 150 - total flux cleaned = 0.0436982 Jy ! Component: 200 - total flux cleaned = 0.0505426 Jy ! Total flux subtracted in 200 components = 0.0505426 Jy ! Clean residual min=-0.009280 max=0.013922 Jy/beam ! Clean residual mean=-0.000108 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 0.422198 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.422198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111379Jy sigma=0.000739 ! Fit after self-cal, rms=0.111065Jy sigma=0.000736 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.13 KP 1.03 ! LA 0.98 MK 1.00 NL 0.88 OV 1.02 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.22 KP 0.99 ! LA 0.96 MK 0.95 NL 1.04 OV 1.02 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.17 KP 0.86 ! LA 0.75 MK 1.01 NL 1.17 OV 0.95 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.16 KP 1.00* ! LA 1.00* MK 1.19 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.111065Jy sigma=0.000736 ! Fit after self-cal, rms=0.105704Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.985 mas, bpa=-4.561 degrees ! Estimated noise=1040.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227621 Jy ! Component: 100 - total flux cleaned = 0.00216779 Jy ! Component: 150 - total flux cleaned = 0.00226017 Jy ! Component: 200 - total flux cleaned = 0.00217537 Jy ! Total flux subtracted in 200 components = 0.00217537 Jy ! Clean residual min=-0.005610 max=0.007413 Jy/beam ! Clean residual mean=-0.000009 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.424373 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.424373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105434Jy sigma=0.000686 ! Fit after self-cal, rms=0.105481Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105481Jy sigma=0.000685 ! Fit after self-cal, rms=0.106412Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=7.957 mas, bpa=-4.417 degrees ! Estimated noise=1043.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605363 Jy ! Component: 100 - total flux cleaned = 0.000892883 Jy ! Component: 150 - total flux cleaned = 0.000900682 Jy ! Component: 200 - total flux cleaned = 0.000900801 Jy ! Total flux subtracted in 200 components = 0.000900801 Jy ! Clean residual min=-0.005069 max=0.005442 Jy/beam ! Clean residual mean=-0.000006 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.425274 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 112 components and 0.425274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106257Jy sigma=0.000676 ! Fit after self-cal, rms=0.106283Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143985 Jy ! Component: 100 - total flux cleaned = 0.000143196 Jy ! Component: 150 - total flux cleaned = 0.00014299 Jy ! Component: 200 - total flux cleaned = 0.000144062 Jy ! Total flux subtracted in 200 components = 0.000144062 Jy ! Clean residual min=-0.004999 max=0.005388 Jy/beam ! Clean residual mean=-0.000006 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.425418 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.425418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106226Jy sigma=0.000676 ! Fit after self-cal, rms=0.106220Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106220Jy sigma=0.000676 ! Fit after self-cal, rms=0.108203Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.925 mas, bpa=-4.312 degrees ! Estimated noise=1040.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257789 Jy ! Component: 100 - total flux cleaned = -0.000256257 Jy ! Component: 150 - total flux cleaned = -0.000256228 Jy ! Component: 200 - total flux cleaned = -0.000258072 Jy ! Total flux subtracted in 200 components = -0.000258072 Jy ! Clean residual min=-0.004839 max=0.004752 Jy/beam ! Clean residual mean=-0.000004 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.42516 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 121 components and 0.42516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108123Jy sigma=0.000672 ! Fit after self-cal, rms=0.108153Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.44504e-05 Jy ! Component: 100 - total flux cleaned = 5.42689e-05 Jy ! Component: 150 - total flux cleaned = 9.61931e-05 Jy ! Component: 200 - total flux cleaned = 9.55829e-05 Jy ! Total flux subtracted in 200 components = 9.55829e-05 Jy ! Clean residual min=-0.004779 max=0.004589 Jy/beam ! Clean residual mean=-0.000004 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.425255 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.425255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108115Jy sigma=0.000671 ! Fit after self-cal, rms=0.108111Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108111Jy sigma=0.000671 ! Fit after self-cal, rms=0.108529Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.619 mas, bmaj=19.75 mas, bpa=-0.2087 degrees ! Estimated noise=1329.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324062 Jy ! Component: 100 - total flux cleaned = 0.000282036 Jy ! Component: 150 - total flux cleaned = 0.000281076 Jy ! Component: 200 - total flux cleaned = 0.000281667 Jy ! Total flux subtracted in 200 components = 0.000281667 Jy ! Clean residual min=-0.006478 max=0.007022 Jy/beam ! Clean residual mean=-0.000007 rms=0.002377 Jy/beam ! Combined flux in latest and established models = 0.425537 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 136 components and 0.425537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108512Jy sigma=0.000671 ! Fit after self-cal, rms=0.108511Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130048 Jy ! Component: 100 - total flux cleaned = 0.00012841 Jy ! Component: 150 - total flux cleaned = 9.76499e-05 Jy ! Component: 200 - total flux cleaned = 9.71554e-05 Jy ! Total flux subtracted in 200 components = 9.71554e-05 Jy ! Clean residual min=-0.006453 max=0.007001 Jy/beam ! Clean residual mean=-0.000007 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 0.425634 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 138 components and 0.425634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108506Jy sigma=0.000671 ! Fit after self-cal, rms=0.108500Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.914 mas, bpa=-4.242 degrees ! Estimated noise=1038.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 7.914 at -4.242 degrees (North through East) ! Clean map min=-0.0042986 max=0.25275 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=6.92 mas, bpa=-5.985 degrees ! Estimated noise=1617.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206633 Jy ! Component: 100 - total flux cleaned = 0.276783 Jy ! Component: 150 - total flux cleaned = 0.314914 Jy ! Component: 200 - total flux cleaned = 0.34045 Jy ! Total flux subtracted in 200 components = 0.34045 Jy ! Clean residual min=-0.008325 max=0.014418 Jy/beam ! Clean residual mean=-0.000093 rms=0.002588 Jy/beam ! Combined flux in latest and established models = 0.340451 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.340451 Jy ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.914 mas, bpa=-4.242 degrees ! Estimated noise=1038.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263739 Jy ! Component: 100 - total flux cleaned = 0.0434871 Jy ! Component: 150 - total flux cleaned = 0.0552681 Jy ! Component: 200 - total flux cleaned = 0.0634819 Jy ! Total flux subtracted in 200 components = 0.0634819 Jy ! Clean residual min=-0.006064 max=0.005067 Jy/beam ! Clean residual mean=-0.000034 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.403932 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 88 components and 0.403932 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.619 mas, bmaj=19.75 mas, bpa=-0.2087 degrees ! Estimated noise=1329.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00955438 Jy ! Component: 100 - total flux cleaned = 0.0145467 Jy ! Component: 150 - total flux cleaned = 0.017275 Jy ! Component: 200 - total flux cleaned = 0.0187964 Jy ! Total flux subtracted in 200 components = 0.0187964 Jy ! Clean residual min=-0.006473 max=0.006860 Jy/beam ! Clean residual mean=-0.000016 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.422729 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000855475 Jy ! Component: 100 - total flux cleaned = 0.00110238 Jy ! Component: 150 - total flux cleaned = 0.00116099 Jy ! Component: 200 - total flux cleaned = 0.0011977 Jy ! Total flux subtracted in 200 components = 0.0011977 Jy ! Clean residual min=-0.006407 max=0.006940 Jy/beam ! Clean residual mean=-0.000012 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 0.423927 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 132 components and 0.423927 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.914 mas, bpa=-4.242 degrees ! Estimated noise=1038.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179691 Jy ! Component: 100 - total flux cleaned = -0.00163415 Jy ! Component: 150 - total flux cleaned = -0.00156769 Jy ! Component: 200 - total flux cleaned = -0.00145543 Jy ! Total flux subtracted in 200 components = -0.00145543 Jy ! Clean residual min=-0.004369 max=0.004450 Jy/beam ! Clean residual mean=-0.000006 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.422471 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 150 components and 0.422471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108513Jy sigma=0.000671 ! Fit after self-cal, rms=0.108449Jy sigma=0.000671 wmodel J2243-2544_S_2017_08_05_pus_map.mod ! Writing 150 model components to file: J2243-2544_S_2017_08_05_pus_map.mod wobs J2243-2544_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2243-2544_S_2017_08_05_pus_uvs.fits wwins J2243-2544_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J2243-2544_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000573073 Jy ! Component: 100 - total flux cleaned = 0.00123515 Jy ! Component: 150 - total flux cleaned = 0.001165 Jy ! Component: 200 - total flux cleaned = 0.000972492 Jy ! Component: 250 - total flux cleaned = 0.000723398 Jy ! Component: 300 - total flux cleaned = 0.000240897 Jy ! Component: 350 - total flux cleaned = -0.000222975 Jy ! Component: 400 - total flux cleaned = -0.000728961 Jy ! Component: 450 - total flux cleaned = -0.00116445 Jy ! Component: 500 - total flux cleaned = -0.00132305 Jy ! Component: 550 - total flux cleaned = -0.00173575 Jy ! Component: 600 - total flux cleaned = -0.00193662 Jy ! Component: 650 - total flux cleaned = -0.00203462 Jy ! Component: 700 - total flux cleaned = -0.00217776 Jy ! Component: 750 - total flux cleaned = -0.00217821 Jy ! Component: 800 - total flux cleaned = -0.00217927 Jy ! Component: 850 - total flux cleaned = -0.0023587 Jy ! Component: 900 - total flux cleaned = -0.00235879 Jy ! Component: 950 - total flux cleaned = -0.00248824 Jy ! Component: 1000 - total flux cleaned = -0.00261391 Jy ! Component: 1050 - total flux cleaned = -0.0026139 Jy ! Component: 1100 - total flux cleaned = -0.00269423 Jy ! Component: 1150 - total flux cleaned = -0.00261473 Jy ! Component: 1200 - total flux cleaned = -0.00265424 Jy ! Component: 1250 - total flux cleaned = -0.00257744 Jy ! Component: 1300 - total flux cleaned = -0.00261566 Jy ! Component: 1350 - total flux cleaned = -0.0026892 Jy ! Component: 1400 - total flux cleaned = -0.00261523 Jy ! Component: 1450 - total flux cleaned = -0.00268682 Jy ! Component: 1500 - total flux cleaned = -0.00265048 Jy ! Component: 1550 - total flux cleaned = -0.0026157 Jy ! Component: 1600 - total flux cleaned = -0.00258172 Jy ! Component: 1650 - total flux cleaned = -0.00261537 Jy ! Component: 1700 - total flux cleaned = -0.00258202 Jy ! Component: 1750 - total flux cleaned = -0.00267915 Jy ! Component: 1800 - total flux cleaned = -0.00264621 Jy ! Component: 1850 - total flux cleaned = -0.00267703 Jy ! Component: 1900 - total flux cleaned = -0.00267709 Jy ! Component: 1950 - total flux cleaned = -0.00276883 Jy ! Component: 2000 - total flux cleaned = -0.00276869 Jy ! Component: 2050 - total flux cleaned = -0.00273895 Jy ! Component: 2100 - total flux cleaned = -0.00273984 Jy ! Component: 2150 - total flux cleaned = -0.00282643 Jy ! Component: 2200 - total flux cleaned = -0.00282662 Jy ! Component: 2250 - total flux cleaned = -0.00274297 Jy ! Component: 2300 - total flux cleaned = -0.00285353 Jy ! Component: 2350 - total flux cleaned = -0.00269002 Jy ! Component: 2400 - total flux cleaned = -0.00266386 Jy ! Component: 2450 - total flux cleaned = -0.00266445 Jy ! Component: 2500 - total flux cleaned = -0.00261208 Jy ! Component: 2550 - total flux cleaned = -0.00255983 Jy ! Component: 2600 - total flux cleaned = -0.00253434 Jy ! Component: 2650 - total flux cleaned = -0.00261004 Jy ! Component: 2700 - total flux cleaned = -0.00260971 Jy ! Component: 2750 - total flux cleaned = -0.00253523 Jy ! Component: 2800 - total flux cleaned = -0.00258473 Jy ! Component: 2850 - total flux cleaned = -0.00253597 Jy ! Component: 2900 - total flux cleaned = -0.00260744 Jy ! Component: 2950 - total flux cleaned = -0.00251243 Jy ! Component: 3000 - total flux cleaned = -0.00253609 Jy ! Component: 3050 - total flux cleaned = -0.00251274 Jy ! Component: 3100 - total flux cleaned = -0.00246732 Jy ! Component: 3150 - total flux cleaned = -0.00255797 Jy ! Component: 3200 - total flux cleaned = -0.00240095 Jy ! Component: 3250 - total flux cleaned = -0.00246793 Jy ! Component: 3300 - total flux cleaned = -0.00249024 Jy ! Component: 3350 - total flux cleaned = -0.00246841 Jy ! Component: 3400 - total flux cleaned = -0.00242546 Jy ! Component: 3450 - total flux cleaned = -0.00251106 Jy ! Component: 3500 - total flux cleaned = -0.00244751 Jy ! Component: 3550 - total flux cleaned = -0.00244759 Jy ! Component: 3600 - total flux cleaned = -0.00250959 Jy ! Component: 3650 - total flux cleaned = -0.00242709 Jy ! Component: 3700 - total flux cleaned = -0.00238658 Jy ! Component: 3750 - total flux cleaned = -0.00238657 Jy ! Component: 3800 - total flux cleaned = -0.0024065 Jy ! Component: 3850 - total flux cleaned = -0.00236659 Jy ! Component: 3900 - total flux cleaned = -0.00232699 Jy ! Component: 3950 - total flux cleaned = -0.00224874 Jy ! Component: 4000 - total flux cleaned = -0.00215204 Jy ! Component: 4050 - total flux cleaned = -0.00211382 Jy ! Total flux subtracted in 4096 components = -0.00205678 Jy ! Clean residual min=-0.000995 max=0.001143 Jy/beam ! Clean residual mean=0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.420414 Jy keep ! Adding 370 model components to the UV plane model. ! The established model now contains 520 components and 0.420414 Jy ![Exited script file: muppet] wmap "J2243-2544_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 7.914 at -4.242 degrees (North through East) ! Clean map min=-0.00252 max=0.2561 Jy/beam ! Writing clean map to FITS file: J2243-2544_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.256102 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000373802 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.437875 0.437875 0.87575 1.7515 3.503 7.006 14.012 28.024 56.048 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 7.914 at -4.242 degrees (North through East) ! Clean map min=-0.00252 max=0.2561 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2243-2544_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:41:10 2019