! Started logfile: J2243-0609_S_2017_05_27_pus_uvs.log on Fri May 3 11:15:52 2019 obs J2243-0609_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2243-0609_S_2017_05_27_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.939087 visibilities/baseline/integration-bin. ! Found source: J2243-0609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 18932 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2243-0609_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 641 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938767Jy sigma=0.043099 ! Fit after self-cal, rms=0.930576Jy sigma=0.043049 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=6.419 mas, bpa=1.691 degrees ! Estimated noise=551.835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314318 Jy ! Component: 100 - total flux cleaned = 0.0426416 Jy ! Total flux subtracted in 100 components = 0.0426416 Jy ! Clean residual min=-0.009880 max=0.017768 Jy/beam ! Clean residual mean=-0.000005 rms=0.003081 Jy/beam ! Combined flux in latest and established models = 0.0426416 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0426416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115026Jy sigma=0.001528 ! Fit after self-cal, rms=0.114970Jy sigma=0.001524 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=7.261 mas, bpa=0.74 degrees ! Estimated noise=409.578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01738 Jy ! Component: 100 - total flux cleaned = 0.025911 Jy ! Component: 150 - total flux cleaned = 0.031827 Jy ! Component: 200 - total flux cleaned = 0.0362618 Jy ! Total flux subtracted in 200 components = 0.0362618 Jy ! Clean residual min=-0.008187 max=0.010892 Jy/beam ! Clean residual mean=-0.000020 rms=0.002504 Jy/beam ! Combined flux in latest and established models = 0.0789035 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.0789035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110784Jy sigma=0.001273 ! Fit after self-cal, rms=0.109767Jy sigma=0.001262 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.63 HN 0.96 KP 0.82 ! LA 0.81 MK 1.24 NL 0.76 OV 0.79 ! PT 0.85 SC 0.80 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 11.00 FD 0.80 HN 0.97 KP 0.80 ! LA 0.84 MK 1.01 NL 0.98 OV 0.95 ! PT 0.87 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.36 FD 0.75 HN 0.99 KP 0.90 ! LA 4.13 MK 0.95 NL 0.84 OV 0.89 ! PT 0.85 SC 0.86 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 0.89 KP 1.00* ! LA 3.31 MK 1.11 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.109767Jy sigma=0.001262 ! Fit after self-cal, rms=0.168103Jy sigma=0.000730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=7.917 mas, bpa=-1.398 degrees ! Estimated noise=555.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586986 Jy ! Component: 100 - total flux cleaned = 0.00740987 Jy ! Component: 150 - total flux cleaned = 0.00832909 Jy ! Component: 200 - total flux cleaned = 0.00884356 Jy ! Total flux subtracted in 200 components = 0.00884356 Jy ! Clean residual min=-0.004618 max=0.003497 Jy/beam ! Clean residual mean=0.000005 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.087747 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.087747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167315Jy sigma=0.000728 ! Fit after self-cal, rms=0.166953Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166953Jy sigma=0.000706 ! Fit after self-cal, rms=0.313732Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.916 mas, bpa=-0.9707 degrees ! Estimated noise=575.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443321 Jy ! Component: 100 - total flux cleaned = 0.00544915 Jy ! Component: 150 - total flux cleaned = 0.00612579 Jy ! Component: 200 - total flux cleaned = 0.00655233 Jy ! Total flux subtracted in 200 components = 0.00655233 Jy ! Clean residual min=-0.003238 max=0.002781 Jy/beam ! Clean residual mean=0.000012 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0942994 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.0942994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313350Jy sigma=0.000690 ! Fit after self-cal, rms=0.313116Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147386 Jy ! Component: 100 - total flux cleaned = -0.000209123 Jy ! Component: 150 - total flux cleaned = -0.000209466 Jy ! Component: 200 - total flux cleaned = -0.000258072 Jy ! Total flux subtracted in 200 components = -0.000258072 Jy ! Clean residual min=-0.003286 max=0.002572 Jy/beam ! Clean residual mean=0.000010 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0940413 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.0940413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313079Jy sigma=0.000687 ! Fit after self-cal, rms=0.313060Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313060Jy sigma=0.000687 ! Fit after self-cal, rms=0.412507Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=7.903 mas, bpa=-1.529 degrees ! Estimated noise=585.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484 Jy ! Component: 100 - total flux cleaned = 0.000431343 Jy ! Component: 150 - total flux cleaned = 0.000477501 Jy ! Component: 200 - total flux cleaned = 0.000476078 Jy ! Total flux subtracted in 200 components = 0.000476078 Jy ! Clean residual min=-0.002290 max=0.002269 Jy/beam ! Clean residual mean=0.000004 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0945174 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.0945174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412484Jy sigma=0.000672 ! Fit after self-cal, rms=0.412494Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196468 Jy ! Component: 100 - total flux cleaned = -0.000275627 Jy ! Component: 150 - total flux cleaned = -0.000313067 Jy ! Component: 200 - total flux cleaned = -0.000382437 Jy ! Total flux subtracted in 200 components = -0.000382437 Jy ! Clean residual min=-0.002229 max=0.002165 Jy/beam ! Clean residual mean=0.000003 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0941349 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.0941349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412489Jy sigma=0.000671 ! Fit after self-cal, rms=0.412478Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412478Jy sigma=0.000671 ! Fit after self-cal, rms=0.446506Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.432 mas, bmaj=13.56 mas, bpa=0.3082 degrees ! Estimated noise=752.787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000897962 Jy ! Component: 100 - total flux cleaned = 0.00110593 Jy ! Component: 150 - total flux cleaned = 0.00128188 Jy ! Component: 200 - total flux cleaned = 0.00128192 Jy ! Total flux subtracted in 200 components = 0.00128192 Jy ! Clean residual min=-0.002542 max=0.002408 Jy/beam ! Clean residual mean=0.000007 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0954169 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.0954168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446475Jy sigma=0.000670 ! Fit after self-cal, rms=0.446449Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.14576e-05 Jy ! Component: 100 - total flux cleaned = -2.13194e-05 Jy ! Component: 150 - total flux cleaned = -4.66318e-05 Jy ! Component: 200 - total flux cleaned = -4.6941e-05 Jy ! Total flux subtracted in 200 components = -4.6941e-05 Jy ! Clean residual min=-0.002478 max=0.002418 Jy/beam ! Clean residual mean=0.000007 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0953699 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.0953699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446444Jy sigma=0.000670 ! Fit after self-cal, rms=0.446415Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.896 mas, bpa=-1.689 degrees ! Estimated noise=592.426 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.896 at -1.689 degrees (North through East) ! Clean map min=-0.0020291 max=0.052252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.765 mas, bpa=-1.714 degrees ! Estimated noise=753.199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444548 Jy ! Component: 100 - total flux cleaned = 0.0585879 Jy ! Component: 150 - total flux cleaned = 0.0672867 Jy ! Component: 200 - total flux cleaned = 0.0731407 Jy ! Total flux subtracted in 200 components = 0.0731407 Jy ! Clean residual min=-0.002592 max=0.003872 Jy/beam ! Clean residual mean=0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0731407 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0731407 Jy ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.896 mas, bpa=-1.689 degrees ! Estimated noise=592.426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627095 Jy ! Component: 100 - total flux cleaned = 0.0103113 Jy ! Component: 150 - total flux cleaned = 0.0131702 Jy ! Component: 200 - total flux cleaned = 0.0152489 Jy ! Total flux subtracted in 200 components = 0.0152489 Jy ! Clean residual min=-0.002030 max=0.002324 Jy/beam ! Clean residual mean=0.000004 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0883896 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 59 components and 0.0883896 Jy ! Inverting map ! Added new window around map position (-124, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217137 Jy ! Component: 100 - total flux cleaned = 0.00355669 Jy ! Component: 150 - total flux cleaned = 0.00431586 Jy ! Component: 200 - total flux cleaned = 0.00484813 Jy ! Total flux subtracted in 200 components = 0.00484813 Jy ! Clean residual min=-0.001961 max=0.001791 Jy/beam ! Clean residual mean=0.000004 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0932377 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 95 components and 0.0932377 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.432 mas, bmaj=13.56 mas, bpa=0.3082 degrees ! Estimated noise=752.787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173747 Jy ! Component: 100 - total flux cleaned = 0.00272469 Jy ! Component: 150 - total flux cleaned = 0.00315257 Jy ! Component: 200 - total flux cleaned = 0.00321906 Jy ! Total flux subtracted in 200 components = 0.00321906 Jy ! Clean residual min=-0.002426 max=0.002166 Jy/beam ! Clean residual mean=0.000006 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0964568 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.55873e-07 Jy ! Component: 100 - total flux cleaned = 8.022e-07 Jy ! Component: 150 - total flux cleaned = 1.82475e-05 Jy ! Component: 200 - total flux cleaned = 9.02541e-07 Jy ! Total flux subtracted in 200 components = 9.02541e-07 Jy ! Clean residual min=-0.002425 max=0.002141 Jy/beam ! Clean residual mean=0.000006 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0964577 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 119 components and 0.0964577 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.896 mas, bpa=-1.689 degrees ! Estimated noise=592.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071981 Jy ! Component: 100 - total flux cleaned = -0.000994522 Jy ! Component: 150 - total flux cleaned = -0.00107718 Jy ! Component: 200 - total flux cleaned = -0.00115286 Jy ! Total flux subtracted in 200 components = -0.00115286 Jy ! Clean residual min=-0.002037 max=0.001726 Jy/beam ! Clean residual mean=0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0953048 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.0953048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446371Jy sigma=0.000669 ! Fit after self-cal, rms=0.446356Jy sigma=0.000669 wmodel J2243-0609_S_2017_05_27_pus_map.mod ! Writing 137 model components to file: J2243-0609_S_2017_05_27_pus_map.mod wobs J2243-0609_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2243-0609_S_2017_05_27_pus_uvs.fits wwins J2243-0609_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J2243-0609_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00082568 Jy ! Component: 100 - total flux cleaned = -0.00141813 Jy ! Component: 150 - total flux cleaned = -0.00190184 Jy ! Component: 200 - total flux cleaned = -0.00210208 Jy ! Component: 250 - total flux cleaned = -0.00232184 Jy ! Component: 300 - total flux cleaned = -0.00245355 Jy ! Component: 350 - total flux cleaned = -0.00245403 Jy ! Component: 400 - total flux cleaned = -0.00250379 Jy ! Component: 450 - total flux cleaned = -0.0025764 Jy ! Component: 500 - total flux cleaned = -0.00257615 Jy ! Component: 550 - total flux cleaned = -0.00259929 Jy ! Component: 600 - total flux cleaned = -0.00264543 Jy ! Component: 650 - total flux cleaned = -0.0027354 Jy ! Component: 700 - total flux cleaned = -0.00277931 Jy ! Component: 750 - total flux cleaned = -0.00282315 Jy ! Component: 800 - total flux cleaned = -0.00286634 Jy ! Component: 850 - total flux cleaned = -0.00297143 Jy ! Component: 900 - total flux cleaned = -0.00297168 Jy ! Component: 950 - total flux cleaned = -0.00309453 Jy ! Component: 1000 - total flux cleaned = -0.00311495 Jy ! Component: 1050 - total flux cleaned = -0.00319447 Jy ! Component: 1100 - total flux cleaned = -0.00325332 Jy ! Component: 1150 - total flux cleaned = -0.00333116 Jy ! Component: 1200 - total flux cleaned = -0.00333135 Jy ! Component: 1250 - total flux cleaned = -0.00338818 Jy ! Component: 1300 - total flux cleaned = -0.00342556 Jy ! Component: 1350 - total flux cleaned = -0.00346196 Jy ! Component: 1400 - total flux cleaned = -0.00346152 Jy ! Component: 1450 - total flux cleaned = -0.00347947 Jy ! Component: 1500 - total flux cleaned = -0.00344363 Jy ! Component: 1550 - total flux cleaned = -0.00349629 Jy ! Component: 1600 - total flux cleaned = -0.00351359 Jy ! Component: 1650 - total flux cleaned = -0.00349634 Jy ! Component: 1700 - total flux cleaned = -0.0035306 Jy ! Component: 1750 - total flux cleaned = -0.00354754 Jy ! Component: 1800 - total flux cleaned = -0.00369818 Jy ! Component: 1850 - total flux cleaned = -0.00376433 Jy ! Component: 1900 - total flux cleaned = -0.00379712 Jy ! Component: 1950 - total flux cleaned = -0.00379716 Jy ! Component: 2000 - total flux cleaned = -0.00386182 Jy ! Component: 2050 - total flux cleaned = -0.00390967 Jy ! Component: 2100 - total flux cleaned = -0.00390978 Jy ! Component: 2150 - total flux cleaned = -0.00392562 Jy ! Component: 2200 - total flux cleaned = -0.00395691 Jy ! Component: 2250 - total flux cleaned = -0.00400337 Jy ! Component: 2300 - total flux cleaned = -0.003942 Jy ! Component: 2350 - total flux cleaned = -0.00403307 Jy ! Component: 2400 - total flux cleaned = -0.00400299 Jy ! Component: 2450 - total flux cleaned = -0.00404786 Jy ! Component: 2500 - total flux cleaned = -0.00406267 Jy ! Component: 2550 - total flux cleaned = -0.00403333 Jy ! Component: 2600 - total flux cleaned = -0.00407728 Jy ! Component: 2650 - total flux cleaned = -0.00404814 Jy ! Component: 2700 - total flux cleaned = -0.00409132 Jy ! Component: 2750 - total flux cleaned = -0.00407711 Jy ! Component: 2800 - total flux cleaned = -0.00411976 Jy ! Component: 2850 - total flux cleaned = -0.00409155 Jy ! Component: 2900 - total flux cleaned = -0.00413367 Jy ! Component: 2950 - total flux cleaned = -0.00410593 Jy ! Component: 3000 - total flux cleaned = -0.00416122 Jy ! Component: 3050 - total flux cleaned = -0.00417486 Jy ! Component: 3100 - total flux cleaned = -0.00416108 Jy ! Component: 3150 - total flux cleaned = -0.00418809 Jy ! Component: 3200 - total flux cleaned = -0.00417454 Jy ! Component: 3250 - total flux cleaned = -0.00422804 Jy ! Component: 3300 - total flux cleaned = -0.00421478 Jy ! Component: 3350 - total flux cleaned = -0.00421477 Jy ! Component: 3400 - total flux cleaned = -0.00424103 Jy ! Component: 3450 - total flux cleaned = -0.00426721 Jy ! Component: 3500 - total flux cleaned = -0.00425416 Jy ! Component: 3550 - total flux cleaned = -0.00425417 Jy ! Component: 3600 - total flux cleaned = -0.00430541 Jy ! Component: 3650 - total flux cleaned = -0.00431824 Jy ! Component: 3700 - total flux cleaned = -0.00429286 Jy ! Component: 3750 - total flux cleaned = -0.004318 Jy ! Component: 3800 - total flux cleaned = -0.00429304 Jy ! Component: 3850 - total flux cleaned = -0.00433024 Jy ! Component: 3900 - total flux cleaned = -0.00429332 Jy ! Component: 3950 - total flux cleaned = -0.00428122 Jy ! Component: 4000 - total flux cleaned = -0.00439093 Jy ! Component: 4050 - total flux cleaned = -0.00435441 Jy ! Total flux subtracted in 4096 components = -0.00437849 Jy ! Clean residual min=-0.000665 max=0.000737 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0909263 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 426 components and 0.0909263 Jy ![Exited script file: muppet] wmap "J2243-0609_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.896 at -1.689 degrees (North through East) ! Clean map min=-0.0018431 max=0.055269 Jy/beam ! Writing clean map to FITS file: J2243-0609_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0552688 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24575 1.24575 2.4915 4.983 9.96599 19.932 39.864 79.7279 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.896 at -1.689 degrees (North through East) ! Clean map min=-0.0018431 max=0.055269 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2243-0609_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:15:57 2019