! Started logfile: J2239-2153_S_2017_08_05_pus_uvs.log on Thu May 9 19:40:59 2019 obs J2239-2153_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2239-2153_S_2017_08_05_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96412 visibilities/baseline/integration-bin. ! Found source: J2239-2153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 16660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2239-2153_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 596 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972451Jy sigma=0.007132 ! Fit after self-cal, rms=0.936842Jy sigma=0.006895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=7.128 mas, bpa=-4.564 degrees ! Estimated noise=1359.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507831 Jy ! Component: 100 - total flux cleaned = 0.0627499 Jy ! Total flux subtracted in 100 components = 0.0627499 Jy ! Clean residual min=-0.003873 max=0.004701 Jy/beam ! Clean residual mean=0.000008 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.0627499 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0627499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098218Jy sigma=0.000664 ! Fit after self-cal, rms=0.097917Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.928 mas, bpa=-4.797 degrees ! Estimated noise=925.174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692643 Jy ! Component: 100 - total flux cleaned = 0.0103049 Jy ! Component: 150 - total flux cleaned = 0.0122265 Jy ! Component: 200 - total flux cleaned = 0.0133361 Jy ! Total flux subtracted in 200 components = 0.0133361 Jy ! Clean residual min=-0.003001 max=0.003519 Jy/beam ! Clean residual mean=-0.000003 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.076086 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 46 components and 0.076086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097392Jy sigma=0.000659 ! Fit after self-cal, rms=0.097380Jy sigma=0.000658 ! Inverting map ! Added new window around map position (-2.5, -16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034428 Jy ! Component: 100 - total flux cleaned = 0.00490068 Jy ! Component: 150 - total flux cleaned = 0.00537476 Jy ! Component: 200 - total flux cleaned = 0.0055207 Jy ! Total flux subtracted in 200 components = 0.0055207 Jy ! Clean residual min=-0.002724 max=0.002708 Jy/beam ! Clean residual mean=0.000003 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0816067 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.0816067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097249Jy sigma=0.000658 ! Fit after self-cal, rms=0.097201Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.08 HN 0.99 KP 1.12 ! LA 1.06 MK 0.99 NL 0.93 OV 0.95 ! PT 1.07 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.03 KP 1.10 ! LA 0.99 MK 1.00 NL 1.01 OV 1.10 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.99 KP 0.92 ! LA 0.79 MK 1.05 NL 1.11 OV 1.00 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.86 KP 1.00* ! LA 1.00* MK 0.84 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.097201Jy sigma=0.000657 ! Fit after self-cal, rms=0.095098Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.922 mas, bpa=-5.015 degrees ! Estimated noise=924.874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188528 Jy ! Component: 100 - total flux cleaned = 0.00277105 Jy ! Component: 150 - total flux cleaned = 0.00285186 Jy ! Component: 200 - total flux cleaned = 0.00280582 Jy ! Total flux subtracted in 200 components = 0.00280582 Jy ! Clean residual min=-0.002668 max=0.002305 Jy/beam ! Clean residual mean=0.000007 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0844125 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.0844125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095056Jy sigma=0.000655 ! Fit after self-cal, rms=0.094992Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094992Jy sigma=0.000655 ! Fit after self-cal, rms=0.095254Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.904 mas, bpa=-5.049 degrees ! Estimated noise=929.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141066 Jy ! Component: 100 - total flux cleaned = 0.00194921 Jy ! Component: 150 - total flux cleaned = 0.00216607 Jy ! Component: 200 - total flux cleaned = 0.00218825 Jy ! Total flux subtracted in 200 components = 0.00218825 Jy ! Clean residual min=-0.002570 max=0.002174 Jy/beam ! Clean residual mean=0.000008 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0866008 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.0866008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095229Jy sigma=0.000654 ! Fit after self-cal, rms=0.095232Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623018 Jy ! Component: 100 - total flux cleaned = 0.000623886 Jy ! Component: 150 - total flux cleaned = 0.000624053 Jy ! Component: 200 - total flux cleaned = 0.000605899 Jy ! Total flux subtracted in 200 components = 0.000605899 Jy ! Clean residual min=-0.002551 max=0.002173 Jy/beam ! Clean residual mean=0.000009 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0872067 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.0872067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095222Jy sigma=0.000653 ! Fit after self-cal, rms=0.095225Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095225Jy sigma=0.000653 ! Fit after self-cal, rms=0.095992Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.909 mas, bpa=-5.097 degrees ! Estimated noise=930.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726764 Jy ! Component: 100 - total flux cleaned = 0.000831468 Jy ! Component: 150 - total flux cleaned = 0.000832805 Jy ! Component: 200 - total flux cleaned = 0.000774094 Jy ! Total flux subtracted in 200 components = 0.000774094 Jy ! Clean residual min=-0.002386 max=0.002064 Jy/beam ! Clean residual mean=0.000008 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0879808 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.0879808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095978Jy sigma=0.000653 ! Fit after self-cal, rms=0.096028Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261136 Jy ! Component: 100 - total flux cleaned = 0.000221186 Jy ! Component: 150 - total flux cleaned = 0.000202485 Jy ! Component: 200 - total flux cleaned = 0.000151941 Jy ! Total flux subtracted in 200 components = 0.000151941 Jy ! Clean residual min=-0.002378 max=0.002042 Jy/beam ! Clean residual mean=0.000009 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0881327 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.0881327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096021Jy sigma=0.000652 ! Fit after self-cal, rms=0.096026Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096026Jy sigma=0.000652 ! Fit after self-cal, rms=0.096378Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.199 mas, bmaj=17.96 mas, bpa=-0.7203 degrees ! Estimated noise=1250.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736412 Jy ! Component: 100 - total flux cleaned = 0.000791288 Jy ! Component: 150 - total flux cleaned = 0.000748434 Jy ! Component: 200 - total flux cleaned = 0.000707898 Jy ! Total flux subtracted in 200 components = 0.000707898 Jy ! Clean residual min=-0.002699 max=0.002500 Jy/beam ! Clean residual mean=0.000015 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0888406 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 0.0888406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096371Jy sigma=0.000652 ! Fit after self-cal, rms=0.096388Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184446 Jy ! Component: 100 - total flux cleaned = 0.000121133 Jy ! Component: 150 - total flux cleaned = 8.21915e-05 Jy ! Component: 200 - total flux cleaned = 4.49726e-05 Jy ! Total flux subtracted in 200 components = 4.49726e-05 Jy ! Clean residual min=-0.002665 max=0.002483 Jy/beam ! Clean residual mean=0.000016 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0888856 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 123 components and 0.0888856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096386Jy sigma=0.000652 ! Fit after self-cal, rms=0.096388Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.907 mas, bpa=-5.15 degrees ! Estimated noise=931.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.907 at -5.15 degrees (North through East) ! Clean map min=-0.0022113 max=0.064168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=7.135 mas, bpa=-5.067 degrees ! Estimated noise=1344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504561 Jy ! Component: 100 - total flux cleaned = 0.0640065 Jy ! Component: 150 - total flux cleaned = 0.0714428 Jy ! Component: 200 - total flux cleaned = 0.0764195 Jy ! Total flux subtracted in 200 components = 0.0764195 Jy ! Clean residual min=-0.003546 max=0.003469 Jy/beam ! Clean residual mean=0.000009 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0764195 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0764195 Jy ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.907 mas, bpa=-5.15 degrees ! Estimated noise=931.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489067 Jy ! Component: 100 - total flux cleaned = 0.00777173 Jy ! Component: 150 - total flux cleaned = 0.0097396 Jy ! Component: 200 - total flux cleaned = 0.0107146 Jy ! Total flux subtracted in 200 components = 0.0107146 Jy ! Clean residual min=-0.002509 max=0.001973 Jy/beam ! Clean residual mean=0.000006 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0871341 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 84 components and 0.0871341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.199 mas, bmaj=17.96 mas, bpa=-0.7203 degrees ! Estimated noise=1250.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129266 Jy ! Component: 100 - total flux cleaned = 0.001474 Jy ! Component: 150 - total flux cleaned = 0.0014737 Jy ! Component: 200 - total flux cleaned = 0.00147299 Jy ! Total flux subtracted in 200 components = 0.00147299 Jy ! Clean residual min=-0.002817 max=0.002443 Jy/beam ! Clean residual mean=0.000015 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0886071 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.66054e-05 Jy ! Component: 100 - total flux cleaned = -2.58654e-05 Jy ! Component: 150 - total flux cleaned = -2.59354e-05 Jy ! Component: 200 - total flux cleaned = -2.65603e-05 Jy ! Total flux subtracted in 200 components = -2.65603e-05 Jy ! Clean residual min=-0.002736 max=0.002438 Jy/beam ! Clean residual mean=0.000015 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0885806 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 122 components and 0.0885805 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.907 mas, bpa=-5.15 degrees ! Estimated noise=931.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.37695e-05 Jy ! Component: 100 - total flux cleaned = -0.000185515 Jy ! Component: 150 - total flux cleaned = -0.000234547 Jy ! Component: 200 - total flux cleaned = -0.000257514 Jy ! Total flux subtracted in 200 components = -0.000257514 Jy ! Clean residual min=-0.002416 max=0.002033 Jy/beam ! Clean residual mean=0.000007 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.088323 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 131 components and 0.088323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096399Jy sigma=0.000652 ! Fit after self-cal, rms=0.096394Jy sigma=0.000652 wmodel J2239-2153_S_2017_08_05_pus_map.mod ! Writing 131 model components to file: J2239-2153_S_2017_08_05_pus_map.mod wobs J2239-2153_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2239-2153_S_2017_08_05_pus_uvs.fits wwins J2239-2153_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J2239-2153_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515362 Jy ! Component: 100 - total flux cleaned = -0.000517691 Jy ! Component: 150 - total flux cleaned = -0.00034653 Jy ! Component: 200 - total flux cleaned = -0.000215495 Jy ! Component: 250 - total flux cleaned = -0.000247562 Jy ! Component: 300 - total flux cleaned = -0.000123008 Jy ! Component: 350 - total flux cleaned = -3.29901e-05 Jy ! Component: 400 - total flux cleaned = -4.11888e-06 Jy ! Component: 450 - total flux cleaned = -0.000117528 Jy ! Component: 500 - total flux cleaned = -8.95067e-05 Jy ! Component: 550 - total flux cleaned = -0.000171509 Jy ! Component: 600 - total flux cleaned = -0.000224426 Jy ! Component: 650 - total flux cleaned = -0.000172335 Jy ! Component: 700 - total flux cleaned = -0.000249314 Jy ! Component: 750 - total flux cleaned = -0.000273404 Jy ! Component: 800 - total flux cleaned = -0.000248665 Jy ! Component: 850 - total flux cleaned = -0.000200159 Jy ! Component: 900 - total flux cleaned = -0.000129263 Jy ! Component: 950 - total flux cleaned = -0.000129499 Jy ! Component: 1000 - total flux cleaned = -5.99406e-05 Jy ! Component: 1050 - total flux cleaned = 9.83857e-05 Jy ! Component: 1100 - total flux cleaned = 0.000209315 Jy ! Component: 1150 - total flux cleaned = 0.000296992 Jy ! Component: 1200 - total flux cleaned = 0.000383102 Jy ! Component: 1250 - total flux cleaned = 0.000446978 Jy ! Component: 1300 - total flux cleaned = 0.000447599 Jy ! Component: 1350 - total flux cleaned = 0.00053009 Jy ! Component: 1400 - total flux cleaned = 0.000550311 Jy ! Component: 1450 - total flux cleaned = 0.000530115 Jy ! Component: 1500 - total flux cleaned = 0.000609348 Jy ! Component: 1550 - total flux cleaned = 0.000589302 Jy ! Component: 1600 - total flux cleaned = 0.00056999 Jy ! Component: 1650 - total flux cleaned = 0.00060805 Jy ! Component: 1700 - total flux cleaned = 0.000608114 Jy ! Component: 1750 - total flux cleaned = 0.000608247 Jy ! Component: 1800 - total flux cleaned = 0.000626448 Jy ! Component: 1850 - total flux cleaned = 0.00055364 Jy ! Component: 1900 - total flux cleaned = 0.000589596 Jy ! Component: 1950 - total flux cleaned = 0.000500515 Jy ! Component: 2000 - total flux cleaned = 0.00057115 Jy ! Component: 2050 - total flux cleaned = 0.000553667 Jy ! Component: 2100 - total flux cleaned = 0.00048479 Jy ! Component: 2150 - total flux cleaned = 0.000502165 Jy ! Component: 2200 - total flux cleaned = 0.000569399 Jy ! Component: 2250 - total flux cleaned = 0.000569139 Jy ! Component: 2300 - total flux cleaned = 0.000552638 Jy ! Component: 2350 - total flux cleaned = 0.00053666 Jy ! Component: 2400 - total flux cleaned = 0.000585086 Jy ! Component: 2450 - total flux cleaned = 0.000552849 Jy ! Component: 2500 - total flux cleaned = 0.000584667 Jy ! Component: 2550 - total flux cleaned = 0.000616056 Jy ! Component: 2600 - total flux cleaned = 0.000647266 Jy ! Component: 2650 - total flux cleaned = 0.00061627 Jy ! Component: 2700 - total flux cleaned = 0.00066205 Jy ! Component: 2750 - total flux cleaned = 0.0006316 Jy ! Component: 2800 - total flux cleaned = 0.000631652 Jy ! Component: 2850 - total flux cleaned = 0.000676628 Jy ! Component: 2900 - total flux cleaned = 0.000735852 Jy ! Component: 2950 - total flux cleaned = 0.000735779 Jy ! Component: 3000 - total flux cleaned = 0.000691951 Jy ! Component: 3050 - total flux cleaned = 0.000663064 Jy ! Component: 3100 - total flux cleaned = 0.000705862 Jy ! Component: 3150 - total flux cleaned = 0.00067734 Jy ! Component: 3200 - total flux cleaned = 0.000747641 Jy ! Component: 3250 - total flux cleaned = 0.000705678 Jy ! Component: 3300 - total flux cleaned = 0.00063646 Jy ! Component: 3350 - total flux cleaned = 0.000664154 Jy ! Component: 3400 - total flux cleaned = 0.000718933 Jy ! Component: 3450 - total flux cleaned = 0.000718801 Jy ! Component: 3500 - total flux cleaned = 0.000638174 Jy ! Component: 3550 - total flux cleaned = 0.000678348 Jy ! Component: 3600 - total flux cleaned = 0.000717882 Jy ! Component: 3650 - total flux cleaned = 0.000717785 Jy ! Component: 3700 - total flux cleaned = 0.000704703 Jy ! Component: 3750 - total flux cleaned = 0.000717699 Jy ! Component: 3800 - total flux cleaned = 0.00070471 Jy ! Component: 3850 - total flux cleaned = 0.000704773 Jy ! Component: 3900 - total flux cleaned = 0.000692203 Jy ! Component: 3950 - total flux cleaned = 0.000704935 Jy ! Component: 4000 - total flux cleaned = 0.000692324 Jy ! Component: 4050 - total flux cleaned = 0.000667229 Jy ! Total flux subtracted in 4096 components = 0.000630013 Jy ! Clean residual min=-0.000716 max=0.000780 Jy/beam ! Clean residual mean=0.000004 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.088953 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 415 components and 0.088953 Jy ![Exited script file: muppet] wmap "J2239-2153_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.907 at -5.15 degrees (North through East) ! Clean map min=-0.0017109 max=0.063482 Jy/beam ! Writing clean map to FITS file: J2239-2153_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0634819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223362 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05555 1.05555 2.1111 4.22221 8.44442 16.8888 33.7777 67.5554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.817 x 7.907 at -5.15 degrees (North through East) ! Clean map min=-0.0017109 max=0.063482 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2239-2153_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:41:04 2019