! Started logfile: J2235+3418_S_2017_10_09_pus_uvs.log on Sun May 12 13:22:08 2019 obs J2235+3418_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2235+3418_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.582567 visibilities/baseline/integration-bin. ! Found source: J2235+3418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2235+3418_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 451 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 364 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 802 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932746Jy sigma=0.009003 ! Fit after self-cal, rms=0.919793Jy sigma=0.008902 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.633 mas, bpa=-2.35 degrees ! Estimated noise=1385.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608051 Jy ! Component: 100 - total flux cleaned = 0.0766434 Jy ! Total flux subtracted in 100 components = 0.0766434 Jy ! Clean residual min=-0.005471 max=0.006547 Jy/beam ! Clean residual mean=0.000004 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.0766434 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0766434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075007Jy sigma=0.000658 ! Fit after self-cal, rms=0.074965Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=8.17 mas, bpa=-2.279 degrees ! Estimated noise=809.368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0077876 Jy ! Component: 100 - total flux cleaned = 0.0109723 Jy ! Component: 150 - total flux cleaned = 0.0126187 Jy ! Component: 200 - total flux cleaned = 0.0136873 Jy ! Total flux subtracted in 200 components = 0.0136873 Jy ! Clean residual min=-0.002839 max=0.003058 Jy/beam ! Clean residual mean=-0.000003 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0903306 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.0903306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074060Jy sigma=0.000652 ! Fit after self-cal, rms=0.074050Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.96 KP 1.02 ! LA 1.06 MK 1.03 NL 0.85 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 1.02 KP 0.98 ! LA 1.06 MK 0.99 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.01 KP 0.92 ! LA 0.84 MK 0.99 NL 1.14 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.99 KP 1.00* ! LA 0.77 MK 0.97 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.074050Jy sigma=0.000652 ! Fit after self-cal, rms=0.071081Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=8.367 mas, bpa=-2.351 degrees ! Estimated noise=813.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427114 Jy ! Component: 100 - total flux cleaned = 0.000491271 Jy ! Component: 150 - total flux cleaned = 0.000504766 Jy ! Component: 200 - total flux cleaned = 0.000527422 Jy ! Total flux subtracted in 200 components = 0.000527422 Jy ! Clean residual min=-0.002339 max=0.002544 Jy/beam ! Clean residual mean=-0.000004 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0908581 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.0908581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071074Jy sigma=0.000651 ! Fit after self-cal, rms=0.071029Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071029Jy sigma=0.000651 ! Fit after self-cal, rms=0.071013Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=8.351 mas, bpa=-2.38 degrees ! Estimated noise=813.806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403488 Jy ! Component: 100 - total flux cleaned = 0.000496663 Jy ! Component: 150 - total flux cleaned = 0.000557797 Jy ! Component: 200 - total flux cleaned = 0.000574583 Jy ! Total flux subtracted in 200 components = 0.000574583 Jy ! Clean residual min=-0.002204 max=0.002462 Jy/beam ! Clean residual mean=-0.000002 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0914326 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0914327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071008Jy sigma=0.000650 ! Fit after self-cal, rms=0.071003Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158594 Jy ! Component: 100 - total flux cleaned = 0.00213907 Jy ! Component: 150 - total flux cleaned = 0.00248718 Jy ! Component: 200 - total flux cleaned = 0.00272275 Jy ! Total flux subtracted in 200 components = 0.00272275 Jy ! Clean residual min=-0.001944 max=0.001816 Jy/beam ! Clean residual mean=-0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0941554 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.0941554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070936Jy sigma=0.000649 ! Fit after self-cal, rms=0.070923Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070923Jy sigma=0.000649 ! Fit after self-cal, rms=0.070827Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=8.356 mas, bpa=-2.39 degrees ! Estimated noise=811.258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704012 Jy ! Component: 100 - total flux cleaned = 0.000979543 Jy ! Component: 150 - total flux cleaned = 0.00114609 Jy ! Component: 200 - total flux cleaned = 0.00125091 Jy ! Total flux subtracted in 200 components = 0.00125091 Jy ! Clean residual min=-0.001811 max=0.001798 Jy/beam ! Clean residual mean=-0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0954063 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.0954063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070809Jy sigma=0.000649 ! Fit after self-cal, rms=0.070812Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241326 Jy ! Component: 100 - total flux cleaned = 0.000336038 Jy ! Component: 150 - total flux cleaned = 0.000386432 Jy ! Component: 200 - total flux cleaned = 0.000417424 Jy ! Total flux subtracted in 200 components = 0.000417424 Jy ! Clean residual min=-0.001752 max=0.001819 Jy/beam ! Clean residual mean=-0.000002 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0958237 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.0958237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070804Jy sigma=0.000649 ! Fit after self-cal, rms=0.070803Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070803Jy sigma=0.000649 ! Fit after self-cal, rms=0.070741Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.844 mas, bmaj=9.043 mas, bpa=-2.744 degrees ! Estimated noise=997.752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489396 Jy ! Component: 100 - total flux cleaned = 0.000592326 Jy ! Component: 150 - total flux cleaned = 0.000626811 Jy ! Component: 200 - total flux cleaned = 0.000611746 Jy ! Total flux subtracted in 200 components = 0.000611746 Jy ! Clean residual min=-0.002257 max=0.002036 Jy/beam ! Clean residual mean=-0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0964355 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.0964355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070737Jy sigma=0.000649 ! Fit after self-cal, rms=0.070740Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.80879e-05 Jy ! Component: 100 - total flux cleaned = 6.32551e-05 Jy ! Component: 150 - total flux cleaned = 6.3181e-05 Jy ! Component: 200 - total flux cleaned = 5.02778e-05 Jy ! Total flux subtracted in 200 components = 5.02778e-05 Jy ! Clean residual min=-0.002191 max=0.002022 Jy/beam ! Clean residual mean=-0.000003 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0964857 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.0964857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070738Jy sigma=0.000649 ! Fit after self-cal, rms=0.070737Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=8.355 mas, bpa=-2.389 degrees ! Estimated noise=810.075 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 8.355 at -2.389 degrees (North through East) ! Clean map min=-0.0019728 max=0.079925 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.899 mas, bpa=-2.404 degrees ! Estimated noise=1376.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596107 Jy ! Component: 100 - total flux cleaned = 0.0757405 Jy ! Component: 150 - total flux cleaned = 0.0827375 Jy ! Component: 200 - total flux cleaned = 0.0858889 Jy ! Total flux subtracted in 200 components = 0.0858889 Jy ! Clean residual min=-0.003375 max=0.004067 Jy/beam ! Clean residual mean=0.000002 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.0858889 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0858889 Jy ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=8.355 mas, bpa=-2.389 degrees ! Estimated noise=810.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382691 Jy ! Component: 100 - total flux cleaned = 0.00594667 Jy ! Component: 150 - total flux cleaned = 0.00689725 Jy ! Component: 200 - total flux cleaned = 0.00767675 Jy ! Total flux subtracted in 200 components = 0.00767675 Jy ! Clean residual min=-0.001970 max=0.001810 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0935657 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 55 components and 0.0935657 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.844 mas, bmaj=9.043 mas, bpa=-2.744 degrees ! Estimated noise=997.752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886861 Jy ! Component: 100 - total flux cleaned = 0.00122237 Jy ! Component: 150 - total flux cleaned = 0.00132547 Jy ! Component: 200 - total flux cleaned = 0.00144817 Jy ! Total flux subtracted in 200 components = 0.00144817 Jy ! Clean residual min=-0.002288 max=0.001896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0950138 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.11895e-05 Jy ! Component: 100 - total flux cleaned = 0.000201398 Jy ! Component: 150 - total flux cleaned = 0.000287209 Jy ! Component: 200 - total flux cleaned = 0.000365249 Jy ! Total flux subtracted in 200 components = 0.000365249 Jy ! Clean residual min=-0.002129 max=0.001866 Jy/beam ! Clean residual mean=-0.000003 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0953791 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 117 components and 0.0953791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=8.355 mas, bpa=-2.389 degrees ! Estimated noise=810.075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.36131e-05 Jy ! Component: 100 - total flux cleaned = 0.000167243 Jy ! Component: 150 - total flux cleaned = 0.000267502 Jy ! Component: 200 - total flux cleaned = 0.000340347 Jy ! Total flux subtracted in 200 components = 0.000340347 Jy ! Clean residual min=-0.001900 max=0.001676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0957195 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 0.0957195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070737Jy sigma=0.000649 ! Fit after self-cal, rms=0.070731Jy sigma=0.000649 wmodel J2235+3418_S_2017_10_09_pus_map.mod ! Writing 143 model components to file: J2235+3418_S_2017_10_09_pus_map.mod wobs J2235+3418_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2235+3418_S_2017_10_09_pus_uvs.fits wwins J2235+3418_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J2235+3418_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000565997 Jy ! Component: 100 - total flux cleaned = -0.000737215 Jy ! Component: 150 - total flux cleaned = -0.000999152 Jy ! Component: 200 - total flux cleaned = -0.00122027 Jy ! Component: 250 - total flux cleaned = -0.00136014 Jy ! Component: 300 - total flux cleaned = -0.00140377 Jy ! Component: 350 - total flux cleaned = -0.00138315 Jy ! Component: 400 - total flux cleaned = -0.00136347 Jy ! Component: 450 - total flux cleaned = -0.00136352 Jy ! Component: 500 - total flux cleaned = -0.00134422 Jy ! Component: 550 - total flux cleaned = -0.00136252 Jy ! Component: 600 - total flux cleaned = -0.00139792 Jy ! Component: 650 - total flux cleaned = -0.0014147 Jy ! Component: 700 - total flux cleaned = -0.00139805 Jy ! Component: 750 - total flux cleaned = -0.00136603 Jy ! Component: 800 - total flux cleaned = -0.00133461 Jy ! Component: 850 - total flux cleaned = -0.00128812 Jy ! Component: 900 - total flux cleaned = -0.00118275 Jy ! Component: 950 - total flux cleaned = -0.00113863 Jy ! Component: 1000 - total flux cleaned = -0.00109522 Jy ! Component: 1050 - total flux cleaned = -0.00106683 Jy ! Component: 1100 - total flux cleaned = -0.00106691 Jy ! Component: 1150 - total flux cleaned = -0.0010531 Jy ! Component: 1200 - total flux cleaned = -0.00102604 Jy ! Component: 1250 - total flux cleaned = -0.00103923 Jy ! Component: 1300 - total flux cleaned = -0.00103932 Jy ! Component: 1350 - total flux cleaned = -0.00106495 Jy ! Component: 1400 - total flux cleaned = -0.00106504 Jy ! Component: 1450 - total flux cleaned = -0.00108972 Jy ! Component: 1500 - total flux cleaned = -0.00113823 Jy ! Component: 1550 - total flux cleaned = -0.0011264 Jy ! Component: 1600 - total flux cleaned = -0.00117347 Jy ! Component: 1650 - total flux cleaned = -0.0012199 Jy ! Component: 1700 - total flux cleaned = -0.00127715 Jy ! Component: 1750 - total flux cleaned = -0.00129977 Jy ! Component: 1800 - total flux cleaned = -0.00134463 Jy ! Component: 1850 - total flux cleaned = -0.00133355 Jy ! Component: 1900 - total flux cleaned = -0.00134481 Jy ! Component: 1950 - total flux cleaned = -0.00138824 Jy ! Component: 2000 - total flux cleaned = -0.00144195 Jy ! Component: 2050 - total flux cleaned = -0.00149506 Jy ! Component: 2100 - total flux cleaned = -0.00153725 Jy ! Component: 2150 - total flux cleaned = -0.00157898 Jy ! Component: 2200 - total flux cleaned = -0.00164129 Jy ! Component: 2250 - total flux cleaned = -0.00168242 Jy ! Component: 2300 - total flux cleaned = -0.00174363 Jy ! Component: 2350 - total flux cleaned = -0.0017741 Jy ! Component: 2400 - total flux cleaned = -0.00184453 Jy ! Component: 2450 - total flux cleaned = -0.00190441 Jy ! Component: 2500 - total flux cleaned = -0.00196393 Jy ! Component: 2550 - total flux cleaned = -0.00200334 Jy ! Component: 2600 - total flux cleaned = -0.00204258 Jy ! Component: 2650 - total flux cleaned = -0.00206214 Jy ! Component: 2700 - total flux cleaned = -0.00213988 Jy ! Component: 2750 - total flux cleaned = -0.00214955 Jy ! Component: 2800 - total flux cleaned = -0.00217839 Jy ! Component: 2850 - total flux cleaned = -0.00220715 Jy ! Component: 2900 - total flux cleaned = -0.0022548 Jy ! Component: 2950 - total flux cleaned = -0.00227373 Jy ! Component: 3000 - total flux cleaned = -0.0023115 Jy ! Component: 3050 - total flux cleaned = -0.00232087 Jy ! Component: 3100 - total flux cleaned = -0.00234901 Jy ! Component: 3150 - total flux cleaned = -0.00236769 Jy ! Component: 3200 - total flux cleaned = -0.00237697 Jy ! Component: 3250 - total flux cleaned = -0.00241396 Jy ! Component: 3300 - total flux cleaned = -0.00243239 Jy ! Component: 3350 - total flux cleaned = -0.00245074 Jy ! Component: 3400 - total flux cleaned = -0.00245992 Jy ! Component: 3450 - total flux cleaned = -0.00246904 Jy ! Component: 3500 - total flux cleaned = -0.00249627 Jy ! Component: 3550 - total flux cleaned = -0.00248725 Jy ! Component: 3600 - total flux cleaned = -0.00250526 Jy ! Component: 3650 - total flux cleaned = -0.00254119 Jy ! Component: 3700 - total flux cleaned = -0.00251422 Jy ! Component: 3750 - total flux cleaned = -0.00253214 Jy ! Component: 3800 - total flux cleaned = -0.00251428 Jy ! Component: 3850 - total flux cleaned = -0.00255888 Jy ! Component: 3900 - total flux cleaned = -0.00256777 Jy ! Component: 3950 - total flux cleaned = -0.00258552 Jy ! Component: 4000 - total flux cleaned = -0.00257669 Jy ! Component: 4050 - total flux cleaned = -0.00261213 Jy ! Total flux subtracted in 4096 components = -0.00260329 Jy ! Clean residual min=-0.000655 max=0.000755 Jy/beam ! Clean residual mean=-0.000001 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.0931162 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 397 components and 0.0931162 Jy ![Exited script file: muppet] wmap "J2235+3418_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 8.355 at -2.389 degrees (North through East) ! Clean map min=-0.0017891 max=0.079373 Jy/beam ! Writing clean map to FITS file: J2235+3418_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.079373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146427 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.553438 0.553438 1.10688 2.21375 4.4275 8.855 17.71 35.42 70.84 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 8.355 at -2.389 degrees (North through East) ! Clean map min=-0.0017891 max=0.079373 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2235+3418_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:22:13 2019