! Started logfile: J2231-0943_S_2017_10_21_pus_uvs.log on Sat May 11 21:07:22 2019 obs J2231-0943_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2231-0943_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.940613 visibilities/baseline/integration-bin. ! Found source: J2231-0943 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 19640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2231-0943_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 639 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002331Jy sigma=0.009391 ! Fit after self-cal, rms=0.956275Jy sigma=0.008987 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=17.61 mas, bpa=-16.16 degrees ! Estimated noise=948.087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363978 Jy ! Component: 100 - total flux cleaned = 0.044343 Jy ! Total flux subtracted in 100 components = 0.044343 Jy ! Clean residual min=-0.003687 max=0.004185 Jy/beam ! Clean residual mean=0.000001 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.044343 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.044343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084093Jy sigma=0.000708 ! Fit after self-cal, rms=0.082464Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=19.88 mas, bpa=-15.82 degrees ! Estimated noise=649.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424825 Jy ! Component: 100 - total flux cleaned = 0.0062776 Jy ! Component: 150 - total flux cleaned = 0.00728738 Jy ! Component: 200 - total flux cleaned = 0.00786317 Jy ! Total flux subtracted in 200 components = 0.00786317 Jy ! Clean residual min=-0.003562 max=0.003490 Jy/beam ! Clean residual mean=0.000002 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0522062 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0522062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082183Jy sigma=0.000690 ! Fit after self-cal, rms=0.082153Jy sigma=0.000690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.92 HN 1.03 KP 1.11 ! LA 1.09 MK 1.10 NL 0.99 OV 1.06 ! PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.03 KP 1.20 ! LA 1.04 MK 1.03 NL 1.03 OV 1.13 ! PT 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.04 KP 1.12 ! LA 0.87 MK 1.12 NL 1.19 OV 1.02 ! PT 0.80 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.68 KP 1.00* ! LA 0.80 MK 0.84 NL 1.00* OV 1.00* ! PT 0.74 ! ! ! Fit before self-cal, rms=0.082153Jy sigma=0.000690 ! Fit after self-cal, rms=0.078423Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=19.74 mas, bpa=-15.6 degrees ! Estimated noise=644.646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000949399 Jy ! Component: 100 - total flux cleaned = -0.00122774 Jy ! Component: 150 - total flux cleaned = -0.00129129 Jy ! Component: 200 - total flux cleaned = -0.0013109 Jy ! Total flux subtracted in 200 components = -0.0013109 Jy ! Clean residual min=-0.001878 max=0.001746 Jy/beam ! Clean residual mean=-0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0508953 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0508953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078406Jy sigma=0.000683 ! Fit after self-cal, rms=0.078600Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078600Jy sigma=0.000682 ! Fit after self-cal, rms=0.079088Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=19.79 mas, bpa=-15.54 degrees ! Estimated noise=643.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000752105 Jy ! Component: 100 - total flux cleaned = -0.000997637 Jy ! Component: 150 - total flux cleaned = -0.00105056 Jy ! Component: 200 - total flux cleaned = -0.00108179 Jy ! Total flux subtracted in 200 components = -0.00108179 Jy ! Clean residual min=-0.001651 max=0.001469 Jy/beam ! Clean residual mean=-0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0498135 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.0498135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079075Jy sigma=0.000680 ! Fit after self-cal, rms=0.079318Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176403 Jy ! Component: 100 - total flux cleaned = 0.000195377 Jy ! Component: 150 - total flux cleaned = 0.000195316 Jy ! Component: 200 - total flux cleaned = 0.000209865 Jy ! Total flux subtracted in 200 components = 0.000209865 Jy ! Clean residual min=-0.001766 max=0.001643 Jy/beam ! Clean residual mean=-0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0500234 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.0500234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079309Jy sigma=0.000679 ! Fit after self-cal, rms=0.079308Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079308Jy sigma=0.000679 ! Fit after self-cal, rms=0.080554Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=19.91 mas, bpa=-15.56 degrees ! Estimated noise=644.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000635152 Jy ! Component: 100 - total flux cleaned = -0.000801667 Jy ! Component: 150 - total flux cleaned = -0.000833303 Jy ! Component: 200 - total flux cleaned = -0.000862965 Jy ! Total flux subtracted in 200 components = -0.000862965 Jy ! Clean residual min=-0.001615 max=0.001541 Jy/beam ! Clean residual mean=-0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0491604 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.0491604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080543Jy sigma=0.000679 ! Fit after self-cal, rms=0.080710Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.33135e-05 Jy ! Component: 100 - total flux cleaned = 1.38929e-05 Jy ! Component: 150 - total flux cleaned = 1.02211e-06 Jy ! Component: 200 - total flux cleaned = 8.54714e-07 Jy ! Total flux subtracted in 200 components = 8.54714e-07 Jy ! Clean residual min=-0.001598 max=0.001629 Jy/beam ! Clean residual mean=-0.000001 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0491613 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.0491613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080704Jy sigma=0.000679 ! Fit after self-cal, rms=0.080708Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080708Jy sigma=0.000679 ! Fit after self-cal, rms=0.081504Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.3 mas, bmaj=21.9 mas, bpa=-7.588 degrees ! Estimated noise=755.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490858 Jy ! Component: 100 - total flux cleaned = -0.000518123 Jy ! Component: 150 - total flux cleaned = -0.000493386 Jy ! Component: 200 - total flux cleaned = -0.000482149 Jy ! Total flux subtracted in 200 components = -0.000482149 Jy ! Clean residual min=-0.001935 max=0.001446 Jy/beam ! Clean residual mean=-0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0486791 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 76 components and 0.0486791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081496Jy sigma=0.000679 ! Fit after self-cal, rms=0.081610Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73481e-05 Jy ! Component: 100 - total flux cleaned = 4.91881e-05 Jy ! Component: 150 - total flux cleaned = 0.000129744 Jy ! Component: 200 - total flux cleaned = 0.000181651 Jy ! Total flux subtracted in 200 components = 0.000181651 Jy ! Clean residual min=-0.001817 max=0.001492 Jy/beam ! Clean residual mean=-0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0488608 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 0.0488608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081606Jy sigma=0.000679 ! Fit after self-cal, rms=0.081610Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=20.02 mas, bpa=-15.58 degrees ! Estimated noise=644.193 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 20.02 at -15.58 degrees (North through East) ! Clean map min=-0.0027671 max=0.048028 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=17.46 mas, bpa=-15.97 degrees ! Estimated noise=938.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376393 Jy ! Component: 100 - total flux cleaned = 0.0459242 Jy ! Component: 150 - total flux cleaned = 0.047342 Jy ! Component: 200 - total flux cleaned = 0.0477239 Jy ! Total flux subtracted in 200 components = 0.0477239 Jy ! Clean residual min=-0.003132 max=0.002953 Jy/beam ! Clean residual mean=-0.000001 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0477239 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0477239 Jy ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=20.02 mas, bpa=-15.58 degrees ! Estimated noise=644.193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513675 Jy ! Component: 100 - total flux cleaned = 0.000517826 Jy ! Component: 150 - total flux cleaned = 0.000602061 Jy ! Component: 200 - total flux cleaned = 0.000704654 Jy ! Total flux subtracted in 200 components = 0.000704654 Jy ! Clean residual min=-0.001668 max=0.001507 Jy/beam ! Clean residual mean=-0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0484285 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.0484285 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.3 mas, bmaj=21.9 mas, bpa=-7.588 degrees ! Estimated noise=755.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.40616e-05 Jy ! Component: 100 - total flux cleaned = 0.000105702 Jy ! Component: 150 - total flux cleaned = 0.000169066 Jy ! Component: 200 - total flux cleaned = 0.000206618 Jy ! Total flux subtracted in 200 components = 0.000206618 Jy ! Clean residual min=-0.001899 max=0.001475 Jy/beam ! Clean residual mean=-0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0486352 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78166e-05 Jy ! Component: 100 - total flux cleaned = 1.82968e-05 Jy ! Component: 150 - total flux cleaned = 3.42724e-05 Jy ! Component: 200 - total flux cleaned = 4.89142e-05 Jy ! Total flux subtracted in 200 components = 4.89142e-05 Jy ! Clean residual min=-0.001873 max=0.001477 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0486841 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.0486841 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=20.02 mas, bpa=-15.58 degrees ! Estimated noise=644.193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.50999e-05 Jy ! Component: 100 - total flux cleaned = -0.000215558 Jy ! Component: 150 - total flux cleaned = -0.000236791 Jy ! Component: 200 - total flux cleaned = -0.000198362 Jy ! Total flux subtracted in 200 components = -0.000198362 Jy ! Clean residual min=-0.001590 max=0.001555 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0484857 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.0484857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081620Jy sigma=0.000679 ! Fit after self-cal, rms=0.081622Jy sigma=0.000679 wmodel J2231-0943_S_2017_10_21_pus_map.mod ! Writing 59 model components to file: J2231-0943_S_2017_10_21_pus_map.mod wobs J2231-0943_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2231-0943_S_2017_10_21_pus_uvs.fits wwins J2231-0943_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2231-0943_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312419 Jy ! Component: 100 - total flux cleaned = -0.000551845 Jy ! Component: 150 - total flux cleaned = -0.000576621 Jy ! Component: 200 - total flux cleaned = -0.000599946 Jy ! Component: 250 - total flux cleaned = -0.000554978 Jy ! Component: 300 - total flux cleaned = -0.000576278 Jy ! Component: 350 - total flux cleaned = -0.000575707 Jy ! Component: 400 - total flux cleaned = -0.000534722 Jy ! Component: 450 - total flux cleaned = -0.000594663 Jy ! Component: 500 - total flux cleaned = -0.000574592 Jy ! Component: 550 - total flux cleaned = -0.000574241 Jy ! Component: 600 - total flux cleaned = -0.000611487 Jy ! Component: 650 - total flux cleaned = -0.000592782 Jy ! Component: 700 - total flux cleaned = -0.000592698 Jy ! Component: 750 - total flux cleaned = -0.000592774 Jy ! Component: 800 - total flux cleaned = -0.000592802 Jy ! Component: 850 - total flux cleaned = -0.000575804 Jy ! Component: 900 - total flux cleaned = -0.000609348 Jy ! Component: 950 - total flux cleaned = -0.000542904 Jy ! Component: 1000 - total flux cleaned = -0.000575757 Jy ! Component: 1050 - total flux cleaned = -0.000591909 Jy ! Component: 1100 - total flux cleaned = -0.000623794 Jy ! Component: 1150 - total flux cleaned = -0.000670628 Jy ! Component: 1200 - total flux cleaned = -0.000655323 Jy ! Component: 1250 - total flux cleaned = -0.000701042 Jy ! Component: 1300 - total flux cleaned = -0.000715925 Jy ! Component: 1350 - total flux cleaned = -0.000730487 Jy ! Component: 1400 - total flux cleaned = -0.000715684 Jy ! Component: 1450 - total flux cleaned = -0.000730307 Jy ! Component: 1500 - total flux cleaned = -0.000716265 Jy ! Component: 1550 - total flux cleaned = -0.000772757 Jy ! Component: 1600 - total flux cleaned = -0.000745042 Jy ! Component: 1650 - total flux cleaned = -0.000786439 Jy ! Component: 1700 - total flux cleaned = -0.000813666 Jy ! Component: 1750 - total flux cleaned = -0.000840526 Jy ! Component: 1800 - total flux cleaned = -0.000880501 Jy ! Component: 1850 - total flux cleaned = -0.000946157 Jy ! Component: 1900 - total flux cleaned = -0.000972149 Jy ! Component: 1950 - total flux cleaned = -0.000984823 Jy ! Component: 2000 - total flux cleaned = -0.000972172 Jy ! Component: 2050 - total flux cleaned = -0.00104807 Jy ! Component: 2100 - total flux cleaned = -0.00104818 Jy ! Component: 2150 - total flux cleaned = -0.00109769 Jy ! Component: 2200 - total flux cleaned = -0.0011222 Jy ! Component: 2250 - total flux cleaned = -0.00115857 Jy ! Component: 2300 - total flux cleaned = -0.00112251 Jy ! Component: 2350 - total flux cleaned = -0.00115828 Jy ! Component: 2400 - total flux cleaned = -0.00120558 Jy ! Component: 2450 - total flux cleaned = -0.00118212 Jy ! Component: 2500 - total flux cleaned = -0.00122863 Jy ! Component: 2550 - total flux cleaned = -0.00127458 Jy ! Component: 2600 - total flux cleaned = -0.00126319 Jy ! Component: 2650 - total flux cleaned = -0.0012971 Jy ! Component: 2700 - total flux cleaned = -0.00136428 Jy ! Component: 2750 - total flux cleaned = -0.00134213 Jy ! Component: 2800 - total flux cleaned = -0.00136417 Jy ! Component: 2850 - total flux cleaned = -0.00137519 Jy ! Component: 2900 - total flux cleaned = -0.00140778 Jy ! Component: 2950 - total flux cleaned = -0.00144004 Jy ! Component: 3000 - total flux cleaned = -0.00147197 Jy ! Component: 3050 - total flux cleaned = -0.00149306 Jy ! Component: 3100 - total flux cleaned = -0.0014931 Jy ! Component: 3150 - total flux cleaned = -0.00151387 Jy ! Component: 3200 - total flux cleaned = -0.00152423 Jy ! Component: 3250 - total flux cleaned = -0.00153459 Jy ! Component: 3300 - total flux cleaned = -0.00156512 Jy ! Component: 3350 - total flux cleaned = -0.00157513 Jy ! Component: 3400 - total flux cleaned = -0.00158513 Jy ! Component: 3450 - total flux cleaned = -0.00162499 Jy ! Component: 3500 - total flux cleaned = -0.00162502 Jy ! Component: 3550 - total flux cleaned = -0.00165449 Jy ! Component: 3600 - total flux cleaned = -0.00168374 Jy ! Component: 3650 - total flux cleaned = -0.00172253 Jy ! Component: 3700 - total flux cleaned = -0.00175144 Jy ! Component: 3750 - total flux cleaned = -0.00179938 Jy ! Component: 3800 - total flux cleaned = -0.00181839 Jy ! Component: 3850 - total flux cleaned = -0.00187517 Jy ! Component: 3900 - total flux cleaned = -0.00188457 Jy ! Component: 3950 - total flux cleaned = -0.00193137 Jy ! Component: 4000 - total flux cleaned = -0.00196862 Jy ! Component: 4050 - total flux cleaned = -0.00199639 Jy ! Total flux subtracted in 4096 components = -0.00200562 Jy ! Clean residual min=-0.000480 max=0.000527 Jy/beam ! Clean residual mean=-0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0464801 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 342 components and 0.0464801 Jy ![Exited script file: muppet] wmap "J2231-0943_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 20.02 at -15.58 degrees (North through East) ! Clean map min=-0.0023503 max=0.048108 Jy/beam ! Writing clean map to FITS file: J2231-0943_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.048108 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06207 1.06207 2.12414 4.24829 8.49658 16.9932 33.9863 67.9726 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 20.02 at -15.58 degrees (North through East) ! Clean map min=-0.0023503 max=0.048108 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2231-0943_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:07:27 2019