! Started logfile: J2230-4416_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:58 2019 obs J2230-4416_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2230-4416_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.341435 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2230-4416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2230-4416_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 540 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 540 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 511 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 879 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.794374Jy sigma=0.004878 ! Fit after self-cal, rms=0.683137Jy sigma=0.004189 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=17.76 mas, bpa=-20.15 degrees ! Estimated noise=2670.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230989 Jy ! Component: 100 - total flux cleaned = 0.298861 Jy ! Total flux subtracted in 100 components = 0.298861 Jy ! Clean residual min=-0.020811 max=0.032733 Jy/beam ! Clean residual mean=-0.000946 rms=0.007739 Jy/beam ! Combined flux in latest and established models = 0.298861 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.298861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160823Jy sigma=0.000859 ! Fit after self-cal, rms=0.160764Jy sigma=0.000858 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=20.93 mas, bpa=-19.74 degrees ! Estimated noise=1599.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640452 Jy ! Component: 100 - total flux cleaned = 0.0980184 Jy ! Component: 150 - total flux cleaned = 0.117328 Jy ! Component: 200 - total flux cleaned = 0.128609 Jy ! Total flux subtracted in 200 components = 0.128609 Jy ! Clean residual min=-0.011608 max=0.015261 Jy/beam ! Clean residual mean=-0.000517 rms=0.004646 Jy/beam ! Combined flux in latest and established models = 0.42747 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 78 components and 0.42747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129494Jy sigma=0.000695 ! Fit after self-cal, rms=0.129234Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.08 ! LA 1.02 MK 0.96 NL 1.30 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.03 ! LA 0.98 MK 0.99 NL 1.26 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.87 ! LA 0.75 MK 1.06 NL 1.25 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 417 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.129234Jy sigma=0.000694 ! Fit after self-cal, rms=0.121202Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=21.66 mas, bpa=-19.84 degrees ! Estimated noise=1689.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825604 Jy ! Component: 100 - total flux cleaned = 0.000826018 Jy ! Component: 150 - total flux cleaned = 0.000822916 Jy ! Component: 200 - total flux cleaned = 0.000910211 Jy ! Total flux subtracted in 200 components = 0.000910211 Jy ! Clean residual min=-0.012430 max=0.011095 Jy/beam ! Clean residual mean=-0.000130 rms=0.003328 Jy/beam ! Combined flux in latest and established models = 0.42838 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.42838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121019Jy sigma=0.000648 ! Fit after self-cal, rms=0.121001Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121001Jy sigma=0.000647 ! Fit after self-cal, rms=0.122536Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=21.72 mas, bpa=-19.85 degrees ! Estimated noise=1700.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151107 Jy ! Component: 100 - total flux cleaned = 0.00151366 Jy ! Component: 150 - total flux cleaned = 0.00142028 Jy ! Component: 200 - total flux cleaned = 0.00142273 Jy ! Total flux subtracted in 200 components = 0.00142273 Jy ! Clean residual min=-0.008961 max=0.008597 Jy/beam ! Clean residual mean=-0.000130 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.429803 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 95 components and 0.429803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122355Jy sigma=0.000639 ! Fit after self-cal, rms=0.122356Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.50502e-05 Jy ! Component: 100 - total flux cleaned = -4.53337e-05 Jy ! Component: 150 - total flux cleaned = -4.5677e-05 Jy ! Component: 200 - total flux cleaned = -0.000111023 Jy ! Total flux subtracted in 200 components = -0.000111023 Jy ! Clean residual min=-0.008694 max=0.008334 Jy/beam ! Clean residual mean=-0.000133 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.429692 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.429692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122274Jy sigma=0.000638 ! Fit after self-cal, rms=0.122265Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122265Jy sigma=0.000638 ! Fit after self-cal, rms=0.123936Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=21.8 mas, bpa=-19.83 degrees ! Estimated noise=1703.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464714 Jy ! Component: 100 - total flux cleaned = -0.000622627 Jy ! Component: 150 - total flux cleaned = -0.000767969 Jy ! Component: 200 - total flux cleaned = -0.000969887 Jy ! Total flux subtracted in 200 components = -0.000969887 Jy ! Clean residual min=-0.006696 max=0.006297 Jy/beam ! Clean residual mean=-0.000171 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.428722 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.428722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123822Jy sigma=0.000635 ! Fit after self-cal, rms=0.123845Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117476 Jy ! Component: 100 - total flux cleaned = -0.000233452 Jy ! Component: 150 - total flux cleaned = -0.00034523 Jy ! Component: 200 - total flux cleaned = -0.000450695 Jy ! Total flux subtracted in 200 components = -0.000450695 Jy ! Clean residual min=-0.006485 max=0.006209 Jy/beam ! Clean residual mean=-0.000176 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.428272 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 107 components and 0.428272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123790Jy sigma=0.000634 ! Fit after self-cal, rms=0.123785Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123785Jy sigma=0.000634 ! Fit after self-cal, rms=0.125220Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.29 mas, bmaj=51.63 mas, bpa=-10.5 degrees ! Estimated noise=2194.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000674367 Jy ! Component: 100 - total flux cleaned = -0.000769388 Jy ! Component: 150 - total flux cleaned = -0.000857463 Jy ! Component: 200 - total flux cleaned = -0.000942892 Jy ! Total flux subtracted in 200 components = -0.000942892 Jy ! Clean residual min=-0.007122 max=0.007011 Jy/beam ! Clean residual mean=-0.000299 rms=0.002458 Jy/beam ! Combined flux in latest and established models = 0.427329 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 125 components and 0.427329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125192Jy sigma=0.000634 ! Fit after self-cal, rms=0.125197Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.97449e-05 Jy ! Component: 100 - total flux cleaned = -0.00013802 Jy ! Component: 150 - total flux cleaned = -0.000213747 Jy ! Component: 200 - total flux cleaned = -0.000250657 Jy ! Total flux subtracted in 200 components = -0.000250657 Jy ! Clean residual min=-0.007041 max=0.006904 Jy/beam ! Clean residual mean=-0.000305 rms=0.002444 Jy/beam ! Combined flux in latest and established models = 0.427078 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 131 components and 0.427078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125187Jy sigma=0.000634 ! Fit after self-cal, rms=0.125182Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=21.83 mas, bpa=-19.81 degrees ! Estimated noise=1706.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 21.83 at -19.81 degrees (North through East) ! Clean map min=-0.0063064 max=0.24804 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=18.13 mas, bpa=-19.89 degrees ! Estimated noise=2939.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238048 Jy ! Component: 100 - total flux cleaned = 0.302252 Jy ! Component: 150 - total flux cleaned = 0.339737 Jy ! Component: 200 - total flux cleaned = 0.364517 Jy ! Total flux subtracted in 200 components = 0.364517 Jy ! Clean residual min=-0.010009 max=0.014435 Jy/beam ! Clean residual mean=-0.000450 rms=0.003391 Jy/beam ! Combined flux in latest and established models = 0.364517 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.364517 Jy ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=21.83 mas, bpa=-19.81 degrees ! Estimated noise=1706.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262795 Jy ! Component: 100 - total flux cleaned = 0.0395875 Jy ! Component: 150 - total flux cleaned = 0.0467824 Jy ! Component: 200 - total flux cleaned = 0.050745 Jy ! Total flux subtracted in 200 components = 0.050745 Jy ! Clean residual min=-0.005644 max=0.006513 Jy/beam ! Clean residual mean=-0.000298 rms=0.001956 Jy/beam ! Combined flux in latest and established models = 0.415262 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 104 components and 0.415262 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.29 mas, bmaj=51.63 mas, bpa=-10.5 degrees ! Estimated noise=2194.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371992 Jy ! Component: 100 - total flux cleaned = 0.00413442 Jy ! Component: 150 - total flux cleaned = 0.00436531 Jy ! Component: 200 - total flux cleaned = 0.00458694 Jy ! Total flux subtracted in 200 components = 0.00458694 Jy ! Clean residual min=-0.006877 max=0.008834 Jy/beam ! Clean residual mean=-0.000434 rms=0.002800 Jy/beam ! Combined flux in latest and established models = 0.419849 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280395 Jy ! Component: 100 - total flux cleaned = 0.000478754 Jy ! Component: 150 - total flux cleaned = 0.000668915 Jy ! Component: 200 - total flux cleaned = 0.000856833 Jy ! Total flux subtracted in 200 components = 0.000856833 Jy ! Clean residual min=-0.006760 max=0.008366 Jy/beam ! Clean residual mean=-0.000419 rms=0.002709 Jy/beam ! Combined flux in latest and established models = 0.420706 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.420706 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=21.83 mas, bpa=-19.81 degrees ! Estimated noise=1706.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335831 Jy ! Component: 100 - total flux cleaned = -0.000177379 Jy ! Component: 150 - total flux cleaned = -7.29897e-06 Jy ! Component: 200 - total flux cleaned = 0.000137373 Jy ! Total flux subtracted in 200 components = 0.000137373 Jy ! Clean residual min=-0.005378 max=0.006109 Jy/beam ! Clean residual mean=-0.000237 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.420843 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 127 components and 0.420843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125031Jy sigma=0.000634 ! Fit after self-cal, rms=0.124949Jy sigma=0.000634 wmodel J2230-4416_S_2017_10_09_pus_map.mod ! Writing 127 model components to file: J2230-4416_S_2017_10_09_pus_map.mod wobs J2230-4416_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2230-4416_S_2017_10_09_pus_uvs.fits wwins J2230-4416_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2230-4416_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431516 Jy ! Component: 100 - total flux cleaned = -0.000190312 Jy ! Component: 150 - total flux cleaned = -0.000508101 Jy ! Component: 200 - total flux cleaned = -0.000725392 Jy ! Component: 250 - total flux cleaned = -0.000923803 Jy ! Component: 300 - total flux cleaned = -0.00092429 Jy ! Component: 350 - total flux cleaned = -0.000867608 Jy ! Component: 400 - total flux cleaned = -0.000761474 Jy ! Component: 450 - total flux cleaned = -0.000813902 Jy ! Component: 500 - total flux cleaned = -0.00086173 Jy ! Component: 550 - total flux cleaned = -0.000908867 Jy ! Component: 600 - total flux cleaned = -0.00103978 Jy ! Component: 650 - total flux cleaned = -0.00107964 Jy ! Component: 700 - total flux cleaned = -0.0011193 Jy ! Component: 750 - total flux cleaned = -0.00115743 Jy ! Component: 800 - total flux cleaned = -0.00137294 Jy ! Component: 850 - total flux cleaned = -0.00164834 Jy ! Component: 900 - total flux cleaned = -0.00181625 Jy ! Component: 950 - total flux cleaned = -0.0021102 Jy ! Component: 1000 - total flux cleaned = -0.0023948 Jy ! Component: 1050 - total flux cleaned = -0.00254908 Jy ! Component: 1100 - total flux cleaned = -0.00272947 Jy ! Component: 1150 - total flux cleaned = -0.00281708 Jy ! Component: 1200 - total flux cleaned = -0.00298962 Jy ! Component: 1250 - total flux cleaned = -0.00307428 Jy ! Component: 1300 - total flux cleaned = -0.00329595 Jy ! Component: 1350 - total flux cleaned = -0.00345853 Jy ! Component: 1400 - total flux cleaned = -0.00361853 Jy ! Component: 1450 - total flux cleaned = -0.0036973 Jy ! Component: 1500 - total flux cleaned = -0.0037751 Jy ! Component: 1550 - total flux cleaned = -0.00385142 Jy ! Component: 1600 - total flux cleaned = -0.00392658 Jy ! Component: 1650 - total flux cleaned = -0.00405045 Jy ! Component: 1700 - total flux cleaned = -0.0041238 Jy ! Component: 1750 - total flux cleaned = -0.00424533 Jy ! Component: 1800 - total flux cleaned = -0.00443765 Jy ! Component: 1850 - total flux cleaned = -0.00450911 Jy ! Component: 1900 - total flux cleaned = -0.00462759 Jy ! Component: 1950 - total flux cleaned = -0.00474535 Jy ! Component: 2000 - total flux cleaned = -0.00481563 Jy ! Component: 2050 - total flux cleaned = -0.00490897 Jy ! Component: 2100 - total flux cleaned = -0.00497871 Jy ! Component: 2150 - total flux cleaned = -0.00500181 Jy ! Component: 2200 - total flux cleaned = -0.00509407 Jy ! Component: 2250 - total flux cleaned = -0.00520917 Jy ! Component: 2300 - total flux cleaned = -0.00527792 Jy ! Component: 2350 - total flux cleaned = -0.00534659 Jy ! Component: 2400 - total flux cleaned = -0.00541518 Jy ! Component: 2450 - total flux cleaned = -0.00548366 Jy ! Component: 2500 - total flux cleaned = -0.00559765 Jy ! Component: 2550 - total flux cleaned = -0.0056204 Jy ! Component: 2600 - total flux cleaned = -0.00571128 Jy ! Component: 2650 - total flux cleaned = -0.00575657 Jy ! Component: 2700 - total flux cleaned = -0.00584737 Jy ! Component: 2750 - total flux cleaned = -0.00586992 Jy ! Component: 2800 - total flux cleaned = -0.00596053 Jy ! Component: 2850 - total flux cleaned = -0.00607349 Jy ! Component: 2900 - total flux cleaned = -0.00614131 Jy ! Component: 2950 - total flux cleaned = -0.00618651 Jy ! Component: 3000 - total flux cleaned = -0.0062093 Jy ! Component: 3050 - total flux cleaned = -0.00623205 Jy ! Component: 3100 - total flux cleaned = -0.00625479 Jy ! Component: 3150 - total flux cleaned = -0.00630033 Jy ! Component: 3200 - total flux cleaned = -0.00630041 Jy ! Component: 3250 - total flux cleaned = -0.00632328 Jy ! Component: 3300 - total flux cleaned = -0.00632327 Jy ! Component: 3350 - total flux cleaned = -0.00634628 Jy ! Component: 3400 - total flux cleaned = -0.00636914 Jy ! Component: 3450 - total flux cleaned = -0.00636913 Jy ! Component: 3500 - total flux cleaned = -0.00641569 Jy ! Component: 3550 - total flux cleaned = -0.00643908 Jy ! Component: 3600 - total flux cleaned = -0.00643897 Jy ! Component: 3650 - total flux cleaned = -0.00646236 Jy ! Component: 3700 - total flux cleaned = -0.00653313 Jy ! Component: 3750 - total flux cleaned = -0.00658073 Jy ! Component: 3800 - total flux cleaned = -0.00658071 Jy ! Component: 3850 - total flux cleaned = -0.00658087 Jy ! Component: 3900 - total flux cleaned = -0.006605 Jy ! Component: 3950 - total flux cleaned = -0.00660498 Jy ! Component: 4000 - total flux cleaned = -0.00665353 Jy ! Component: 4050 - total flux cleaned = -0.00662921 Jy ! Total flux subtracted in 4096 components = -0.00662918 Jy ! Clean residual min=-0.001411 max=0.001344 Jy/beam ! Clean residual mean=0.000010 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.414214 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 420 components and 0.414214 Jy ![Exited script file: muppet] wmap "J2230-4416_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 21.83 at -19.81 degrees (North through East) ! Clean map min=-0.0053828 max=0.27614 Jy/beam ! Writing clean map to FITS file: J2230-4416_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276145 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000553552 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.601371 0.601371 1.20274 2.40549 4.81097 9.62194 19.2439 38.4878 76.9755 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 21.83 at -19.81 degrees (North through East) ! Clean map min=-0.0053828 max=0.27614 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2230-4416_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:22:03 2019