! Started logfile: J2230-4416_S_2017_08_12_pus_uvs.log on Fri May 10 15:09:43 2019 obs J2230-4416_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2230-4416_S_2017_08_12_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.133333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2230-4416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2230-4416_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 508 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 685 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 830 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.838245Jy sigma=0.004563 ! Fit after self-cal, rms=0.683519Jy sigma=0.003736 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=18.08 mas, bpa=10.03 degrees ! Estimated noise=8439.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253058 Jy ! Component: 100 - total flux cleaned = 0.316746 Jy ! Total flux subtracted in 100 components = 0.316746 Jy ! Clean residual min=-0.025380 max=0.027533 Jy/beam ! Clean residual mean=-0.000032 rms=0.008893 Jy/beam ! Combined flux in latest and established models = 0.316746 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.316746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123893Jy sigma=0.000671 ! Fit after self-cal, rms=0.123792Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=20.89 mas, bpa=8.94 degrees ! Estimated noise=4128.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268746 Jy ! Component: 100 - total flux cleaned = 0.0421058 Jy ! Component: 150 - total flux cleaned = 0.0464694 Jy ! Component: 200 - total flux cleaned = 0.0495836 Jy ! Total flux subtracted in 200 components = 0.0495836 Jy ! Clean residual min=-0.006052 max=0.006000 Jy/beam ! Clean residual mean=-0.000026 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.36633 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 63 components and 0.36633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116899Jy sigma=0.000633 ! Fit after self-cal, rms=0.116871Jy sigma=0.000633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.99 MK 1.00* NL 1.00* OV 1.02 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.94 MK 1.00* NL 1.00* OV 1.08 ! PT 1.00* SC 0.90 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.90 ! LA 1.03 MK 1.00* NL 1.00* OV 0.91 ! PT 1.00* SC 1.27 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.116871Jy sigma=0.000633 ! Fit after self-cal, rms=0.119036Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=21.54 mas, bpa=11.14 degrees ! Estimated noise=4695.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00438301 Jy ! Component: 100 - total flux cleaned = -0.00558334 Jy ! Component: 150 - total flux cleaned = -0.00659641 Jy ! Component: 200 - total flux cleaned = -0.00719998 Jy ! Total flux subtracted in 200 components = -0.00719998 Jy ! Clean residual min=-0.002448 max=0.002412 Jy/beam ! Clean residual mean=-0.000008 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.35913 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 98 components and 0.35913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118493Jy sigma=0.000631 ! Fit after self-cal, rms=0.118669Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118669Jy sigma=0.000631 ! Fit after self-cal, rms=0.119131Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=21.54 mas, bpa=11.14 degrees ! Estimated noise=4707.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167369 Jy ! Component: 100 - total flux cleaned = -0.00275007 Jy ! Component: 150 - total flux cleaned = -0.00354981 Jy ! Component: 200 - total flux cleaned = -0.00343436 Jy ! Total flux subtracted in 200 components = -0.00343436 Jy ! Clean residual min=-0.001848 max=0.001860 Jy/beam ! Clean residual mean=-0.000006 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.355695 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 0.355695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118910Jy sigma=0.000629 ! Fit after self-cal, rms=0.118929Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122334 Jy ! Component: 100 - total flux cleaned = 0.001524 Jy ! Component: 150 - total flux cleaned = 0.00209948 Jy ! Component: 200 - total flux cleaned = 0.00210149 Jy ! Total flux subtracted in 200 components = 0.00210149 Jy ! Clean residual min=-0.001583 max=0.001595 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.357797 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 154 components and 0.357797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118790Jy sigma=0.000629 ! Fit after self-cal, rms=0.118802Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118802Jy sigma=0.000629 ! Fit after self-cal, rms=0.118701Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=21.53 mas, bpa=11.15 degrees ! Estimated noise=4703.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059501 Jy ! Component: 100 - total flux cleaned = -0.000684026 Jy ! Component: 150 - total flux cleaned = -0.000593379 Jy ! Component: 200 - total flux cleaned = -0.000320944 Jy ! Total flux subtracted in 200 components = -0.000320944 Jy ! Clean residual min=-0.001533 max=0.001540 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.357476 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 184 components and 0.357476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118577Jy sigma=0.000628 ! Fit after self-cal, rms=0.118578Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036493 Jy ! Component: 100 - total flux cleaned = 0.000684256 Jy ! Component: 150 - total flux cleaned = 0.00092054 Jy ! Component: 200 - total flux cleaned = 0.000923646 Jy ! Total flux subtracted in 200 components = 0.000923646 Jy ! Clean residual min=-0.001358 max=0.001342 Jy/beam ! Clean residual mean=0.000000 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.358399 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 208 components and 0.3584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118480Jy sigma=0.000627 ! Fit after self-cal, rms=0.118486Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118486Jy sigma=0.000627 ! Fit after self-cal, rms=0.118535Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.389 mas, bmaj=43.92 mas, bpa=2.371 degrees ! Estimated noise=6389.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.47448e-05 Jy ! Component: 100 - total flux cleaned = 1.82324e-05 Jy ! Component: 150 - total flux cleaned = -4.94372e-05 Jy ! Component: 200 - total flux cleaned = -1.53518e-05 Jy ! Total flux subtracted in 200 components = -1.53518e-05 Jy ! Clean residual min=-0.000607 max=0.000607 Jy/beam ! Clean residual mean=0.000004 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.358384 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 226 components and 0.358384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118517Jy sigma=0.000627 ! Fit after self-cal, rms=0.118514Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211127 Jy ! Component: 100 - total flux cleaned = 0.000407171 Jy ! Component: 150 - total flux cleaned = 0.000514169 Jy ! Component: 200 - total flux cleaned = 0.000513445 Jy ! Total flux subtracted in 200 components = 0.000513445 Jy ! Clean residual min=-0.000367 max=0.000358 Jy/beam ! Clean residual mean=-0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.358898 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 258 components and 0.358898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118496Jy sigma=0.000627 ! Fit after self-cal, rms=0.118497Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=21.52 mas, bpa=11.16 degrees ! Estimated noise=4700.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.016 x 21.52 at 11.16 degrees (North through East) ! Clean map min=-0.0079557 max=0.30758 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.591 mas, bmaj=20.72 mas, bpa=12.61 degrees ! Estimated noise=5247.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242622 Jy ! Component: 100 - total flux cleaned = 0.298796 Jy ! Component: 150 - total flux cleaned = 0.32213 Jy ! Component: 200 - total flux cleaned = 0.328425 Jy ! Total flux subtracted in 200 components = 0.328425 Jy ! Clean residual min=-0.009790 max=0.009751 Jy/beam ! Clean residual mean=0.000013 rms=0.003440 Jy/beam ! Combined flux in latest and established models = 0.328426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.328426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=21.52 mas, bpa=11.16 degrees ! Estimated noise=4700.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106385 Jy ! Component: 100 - total flux cleaned = 0.00958647 Jy ! Component: 150 - total flux cleaned = 0.00805345 Jy ! Component: 200 - total flux cleaned = 0.00639508 Jy ! Total flux subtracted in 200 components = 0.00639508 Jy ! Clean residual min=-0.003750 max=0.003678 Jy/beam ! Clean residual mean=-0.000003 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.334821 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 104 components and 0.334821 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.389 mas, bmaj=43.92 mas, bpa=2.371 degrees ! Estimated noise=6389.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233245 Jy ! Component: 100 - total flux cleaned = 0.00109841 Jy ! Component: 150 - total flux cleaned = 0.00140913 Jy ! Component: 200 - total flux cleaned = 0.00178091 Jy ! Total flux subtracted in 200 components = 0.00178091 Jy ! Clean residual min=-0.001253 max=0.001248 Jy/beam ! Clean residual mean=0.000002 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.336602 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302467 Jy ! Component: 100 - total flux cleaned = 0.00069473 Jy ! Component: 150 - total flux cleaned = 0.00127993 Jy ! Component: 200 - total flux cleaned = 0.00155644 Jy ! Total flux subtracted in 200 components = 0.00155644 Jy ! Clean residual min=-0.001651 max=0.001675 Jy/beam ! Clean residual mean=0.000011 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.338158 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 172 components and 0.338158 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=21.52 mas, bpa=11.16 degrees ! Estimated noise=4700.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4651e-05 Jy ! Component: 100 - total flux cleaned = 0.000275865 Jy ! Component: 150 - total flux cleaned = 0.000710482 Jy ! Component: 200 - total flux cleaned = 0.00141637 Jy ! Total flux subtracted in 200 components = 0.00141637 Jy ! Clean residual min=-0.001645 max=0.001643 Jy/beam ! Clean residual mean=-0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.339574 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 217 components and 0.339574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118847Jy sigma=0.000629 ! Fit after self-cal, rms=0.118822Jy sigma=0.000629 wmodel J2230-4416_S_2017_08_12_pus_map.mod ! Writing 217 model components to file: J2230-4416_S_2017_08_12_pus_map.mod wobs J2230-4416_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2230-4416_S_2017_08_12_pus_uvs.fits wwins J2230-4416_S_2017_08_12_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2230-4416_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.016 x 21.52 at 11.16 degrees (North through East) ! Clean map min=-0.0057508 max=0.30244 Jy/beam ! Writing clean map to FITS file: J2230-4416_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.302439 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000525107 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.520872 0.520872 1.04174 2.08349 4.16697 8.33395 16.6679 33.3358 66.6716 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.302 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.016 x 21.52 at 11.16 degrees (North through East) ! Clean map min=-0.0057508 max=0.30244 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2230-4416_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:09:46 2019