! Started logfile: J2228-0753_S_2017_05_27_pus_uvs.log on Fri May 3 11:15:37 2019 obs J2228-0753_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2228-0753_S_2017_05_27_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.908294 visibilities/baseline/integration-bin. ! Found source: J2228-0753 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 23216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2228-0753_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 734 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888063Jy sigma=0.037800 ! Fit after self-cal, rms=0.876023Jy sigma=0.037760 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=6.168 mas, bpa=-3.257 degrees ! Estimated noise=711.005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0639854 Jy ! Component: 100 - total flux cleaned = 0.0852241 Jy ! Total flux subtracted in 100 components = 0.0852241 Jy ! Clean residual min=-0.018006 max=0.035122 Jy/beam ! Clean residual mean=-0.000004 rms=0.006330 Jy/beam ! Combined flux in latest and established models = 0.0852241 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0852241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127630Jy sigma=0.002498 ! Fit after self-cal, rms=0.127458Jy sigma=0.002497 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=7.107 mas, bpa=2.042 degrees ! Estimated noise=406.401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030594 Jy ! Component: 100 - total flux cleaned = 0.038038 Jy ! Component: 150 - total flux cleaned = 0.0400415 Jy ! Component: 200 - total flux cleaned = 0.0413139 Jy ! Total flux subtracted in 200 components = 0.0413139 Jy ! Clean residual min=-0.011640 max=0.019219 Jy/beam ! Clean residual mean=-0.000008 rms=0.003916 Jy/beam ! Combined flux in latest and established models = 0.126538 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.126538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123459Jy sigma=0.001672 ! Fit after self-cal, rms=0.121758Jy sigma=0.001658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.36 FD 0.72 HN 0.97 KP 0.95 ! LA 0.93 MK 0.99 NL 0.87 OV 0.94 ! PT 1.02 SC 0.74 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 11.80 FD 0.80 HN 0.99 KP 0.96 ! LA 0.92 MK 1.01 NL 1.03 OV 1.04 ! PT 1.01 SC 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.36 FD 0.82 HN 0.94 KP 0.93 ! LA 0.94 MK 0.99 NL 0.96 OV 0.84 ! PT 0.99 SC 0.79 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.00 KP 1.00* ! LA 0.87 MK 1.09 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.121758Jy sigma=0.001658 ! Fit after self-cal, rms=0.085408Jy sigma=0.000725 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=7.681 mas, bpa=-0.9082 degrees ! Estimated noise=536.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112138 Jy ! Component: 100 - total flux cleaned = -0.00169046 Jy ! Component: 150 - total flux cleaned = -0.00247341 Jy ! Component: 200 - total flux cleaned = -0.00298332 Jy ! Total flux subtracted in 200 components = -0.00298332 Jy ! Clean residual min=-0.004158 max=0.002934 Jy/beam ! Clean residual mean=0.000001 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.123555 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.123555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084701Jy sigma=0.000715 ! Fit after self-cal, rms=0.081995Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081995Jy sigma=0.000696 ! Fit after self-cal, rms=0.079765Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.756 mas, bpa=-1.189 degrees ! Estimated noise=538.229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171319 Jy ! Component: 100 - total flux cleaned = -0.000556054 Jy ! Component: 150 - total flux cleaned = -0.000881864 Jy ! Component: 200 - total flux cleaned = -0.000882697 Jy ! Total flux subtracted in 200 components = -0.000882697 Jy ! Clean residual min=-0.003597 max=0.002382 Jy/beam ! Clean residual mean=0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.122672 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.122672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079446Jy sigma=0.000686 ! Fit after self-cal, rms=0.079456Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450918 Jy ! Component: 100 - total flux cleaned = -0.000444766 Jy ! Component: 150 - total flux cleaned = -0.000444326 Jy ! Component: 200 - total flux cleaned = -0.000381826 Jy ! Total flux subtracted in 200 components = -0.000381826 Jy ! Clean residual min=-0.003333 max=0.002196 Jy/beam ! Clean residual mean=0.000003 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.12229 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.12229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079333Jy sigma=0.000684 ! Fit after self-cal, rms=0.079339Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079339Jy sigma=0.000684 ! Fit after self-cal, rms=0.076697Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=7.795 mas, bpa=-1.544 degrees ! Estimated noise=544.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000582963 Jy ! Component: 100 - total flux cleaned = -0.000747792 Jy ! Component: 150 - total flux cleaned = -0.000951809 Jy ! Component: 200 - total flux cleaned = -0.000894261 Jy ! Total flux subtracted in 200 components = -0.000894261 Jy ! Clean residual min=-0.002649 max=0.002143 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.121396 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.121396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076551Jy sigma=0.000681 ! Fit after self-cal, rms=0.076509Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258775 Jy ! Component: 100 - total flux cleaned = -0.000208733 Jy ! Component: 150 - total flux cleaned = -0.000210509 Jy ! Component: 200 - total flux cleaned = -0.000173554 Jy ! Total flux subtracted in 200 components = -0.000173554 Jy ! Clean residual min=-0.002490 max=0.002135 Jy/beam ! Clean residual mean=0.000002 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.121222 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.121222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076449Jy sigma=0.000680 ! Fit after self-cal, rms=0.076452Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076452Jy sigma=0.000680 ! Fit after self-cal, rms=0.076358Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.369 mas, bmaj=13.95 mas, bpa=2.27 degrees ! Estimated noise=709.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033609 Jy ! Component: 100 - total flux cleaned = 0.000681479 Jy ! Component: 150 - total flux cleaned = 0.000916378 Jy ! Component: 200 - total flux cleaned = 0.000997658 Jy ! Total flux subtracted in 200 components = 0.000997658 Jy ! Clean residual min=-0.003132 max=0.002371 Jy/beam ! Clean residual mean=0.000002 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.12222 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.12222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076296Jy sigma=0.000679 ! Fit after self-cal, rms=0.076271Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249958 Jy ! Component: 100 - total flux cleaned = -0.000158068 Jy ! Component: 150 - total flux cleaned = -7.79897e-05 Jy ! Component: 200 - total flux cleaned = -7.87113e-05 Jy ! Total flux subtracted in 200 components = -7.87113e-05 Jy ! Clean residual min=-0.003017 max=0.002257 Jy/beam ! Clean residual mean=0.000002 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.122141 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.122141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076247Jy sigma=0.000679 ! Fit after self-cal, rms=0.076248Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=7.811 mas, bpa=-1.765 degrees ! Estimated noise=548.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 7.811 at -1.765 degrees (North through East) ! Clean map min=-0.0044136 max=0.09104 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=6.677 mas, bpa=-2.55 degrees ! Estimated noise=853.659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783252 Jy ! Component: 100 - total flux cleaned = 0.0983735 Jy ! Component: 150 - total flux cleaned = 0.107251 Jy ! Component: 200 - total flux cleaned = 0.111701 Jy ! Total flux subtracted in 200 components = 0.111701 Jy ! Clean residual min=-0.003252 max=0.004083 Jy/beam ! Clean residual mean=0.000000 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.111701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.111701 Jy ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=7.811 mas, bpa=-1.765 degrees ! Estimated noise=548.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051102 Jy ! Component: 100 - total flux cleaned = 0.00728256 Jy ! Component: 150 - total flux cleaned = 0.00850074 Jy ! Component: 200 - total flux cleaned = 0.00917056 Jy ! Total flux subtracted in 200 components = 0.00917056 Jy ! Clean residual min=-0.001996 max=0.001897 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.120872 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 59 components and 0.120872 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.369 mas, bmaj=13.95 mas, bpa=2.27 degrees ! Estimated noise=709.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015743 Jy ! Component: 100 - total flux cleaned = 0.00162563 Jy ! Component: 150 - total flux cleaned = 0.00159042 Jy ! Component: 200 - total flux cleaned = 0.00149968 Jy ! Total flux subtracted in 200 components = 0.00149968 Jy ! Clean residual min=-0.002839 max=0.002198 Jy/beam ! Clean residual mean=0.000002 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.122371 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.93648e-05 Jy ! Component: 100 - total flux cleaned = -0.000150037 Jy ! Component: 150 - total flux cleaned = -0.000233953 Jy ! Component: 200 - total flux cleaned = -0.000270094 Jy ! Total flux subtracted in 200 components = -0.000270094 Jy ! Clean residual min=-0.002798 max=0.002160 Jy/beam ! Clean residual mean=0.000002 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.122101 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 113 components and 0.122101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=7.811 mas, bpa=-1.765 degrees ! Estimated noise=548.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547022 Jy ! Component: 100 - total flux cleaned = -0.00051697 Jy ! Component: 150 - total flux cleaned = -0.000465808 Jy ! Component: 200 - total flux cleaned = -0.000419742 Jy ! Total flux subtracted in 200 components = -0.000419742 Jy ! Clean residual min=-0.001799 max=0.001693 Jy/beam ! Clean residual mean=0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.121681 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 128 components and 0.121682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076137Jy sigma=0.000678 ! Fit after self-cal, rms=0.076134Jy sigma=0.000678 wmodel J2228-0753_S_2017_05_27_pus_map.mod ! Writing 128 model components to file: J2228-0753_S_2017_05_27_pus_map.mod wobs J2228-0753_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2228-0753_S_2017_05_27_pus_uvs.fits wwins J2228-0753_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J2228-0753_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000519682 Jy ! Component: 100 - total flux cleaned = -0.000875277 Jy ! Component: 150 - total flux cleaned = -0.000931815 Jy ! Component: 200 - total flux cleaned = -0.000984625 Jy ! Component: 250 - total flux cleaned = -0.00106117 Jy ! Component: 300 - total flux cleaned = -0.0011845 Jy ! Component: 350 - total flux cleaned = -0.00123276 Jy ! Component: 400 - total flux cleaned = -0.00132646 Jy ! Component: 450 - total flux cleaned = -0.00141753 Jy ! Component: 500 - total flux cleaned = -0.00144002 Jy ! Component: 550 - total flux cleaned = -0.00150508 Jy ! Component: 600 - total flux cleaned = -0.00154742 Jy ! Component: 650 - total flux cleaned = -0.00150638 Jy ! Component: 700 - total flux cleaned = -0.00152707 Jy ! Component: 750 - total flux cleaned = -0.00150745 Jy ! Component: 800 - total flux cleaned = -0.00150694 Jy ! Component: 850 - total flux cleaned = -0.00142939 Jy ! Component: 900 - total flux cleaned = -0.00146697 Jy ! Component: 950 - total flux cleaned = -0.0013739 Jy ! Component: 1000 - total flux cleaned = -0.00133727 Jy ! Component: 1050 - total flux cleaned = -0.00124675 Jy ! Component: 1100 - total flux cleaned = -0.00124698 Jy ! Component: 1150 - total flux cleaned = -0.00128222 Jy ! Component: 1200 - total flux cleaned = -0.00121241 Jy ! Component: 1250 - total flux cleaned = -0.00124676 Jy ! Component: 1300 - total flux cleaned = -0.00124678 Jy ! Component: 1350 - total flux cleaned = -0.00121316 Jy ! Component: 1400 - total flux cleaned = -0.00122985 Jy ! Component: 1450 - total flux cleaned = -0.00123008 Jy ! Component: 1500 - total flux cleaned = -0.00124648 Jy ! Component: 1550 - total flux cleaned = -0.00119868 Jy ! Component: 1600 - total flux cleaned = -0.00127772 Jy ! Component: 1650 - total flux cleaned = -0.00126191 Jy ! Component: 1700 - total flux cleaned = -0.00123087 Jy ! Component: 1750 - total flux cleaned = -0.00118534 Jy ! Component: 1800 - total flux cleaned = -0.00126123 Jy ! Component: 1850 - total flux cleaned = -0.00126117 Jy ! Component: 1900 - total flux cleaned = -0.00129082 Jy ! Component: 1950 - total flux cleaned = -0.00132009 Jy ! Component: 2000 - total flux cleaned = -0.00134917 Jy ! Component: 2050 - total flux cleaned = -0.00130581 Jy ! Component: 2100 - total flux cleaned = -0.00139152 Jy ! Component: 2150 - total flux cleaned = -0.00140566 Jy ! Component: 2200 - total flux cleaned = -0.00147556 Jy ! Component: 2250 - total flux cleaned = -0.00151708 Jy ! Component: 2300 - total flux cleaned = -0.00155817 Jy ! Component: 2350 - total flux cleaned = -0.00157163 Jy ! Component: 2400 - total flux cleaned = -0.00161208 Jy ! Component: 2450 - total flux cleaned = -0.00165224 Jy ! Component: 2500 - total flux cleaned = -0.00169214 Jy ! Component: 2550 - total flux cleaned = -0.00171851 Jy ! Component: 2600 - total flux cleaned = -0.00179668 Jy ! Component: 2650 - total flux cleaned = -0.00183526 Jy ! Component: 2700 - total flux cleaned = -0.00187349 Jy ! Component: 2750 - total flux cleaned = -0.00189861 Jy ! Component: 2800 - total flux cleaned = -0.00192379 Jy ! Component: 2850 - total flux cleaned = -0.0019737 Jy ! Component: 2900 - total flux cleaned = -0.00196131 Jy ! Component: 2950 - total flux cleaned = -0.00199808 Jy ! Component: 3000 - total flux cleaned = -0.00203455 Jy ! Component: 3050 - total flux cleaned = -0.00208282 Jy ! Component: 3100 - total flux cleaned = -0.00215468 Jy ! Component: 3150 - total flux cleaned = -0.00216658 Jy ! Component: 3200 - total flux cleaned = -0.00216642 Jy ! Component: 3250 - total flux cleaned = -0.00218995 Jy ! Component: 3300 - total flux cleaned = -0.0021899 Jy ! Component: 3350 - total flux cleaned = -0.00218989 Jy ! Component: 3400 - total flux cleaned = -0.00216689 Jy ! Component: 3450 - total flux cleaned = -0.00217826 Jy ! Component: 3500 - total flux cleaned = -0.0022009 Jy ! Component: 3550 - total flux cleaned = -0.00215608 Jy ! Component: 3600 - total flux cleaned = -0.00220066 Jy ! Component: 3650 - total flux cleaned = -0.00215649 Jy ! Component: 3700 - total flux cleaned = -0.00220043 Jy ! Component: 3750 - total flux cleaned = -0.00221128 Jy ! Component: 3800 - total flux cleaned = -0.00218967 Jy ! Component: 3850 - total flux cleaned = -0.00220028 Jy ! Component: 3900 - total flux cleaned = -0.00222163 Jy ! Component: 3950 - total flux cleaned = -0.00222152 Jy ! Component: 4000 - total flux cleaned = -0.00218987 Jy ! Component: 4050 - total flux cleaned = -0.00222128 Jy ! Total flux subtracted in 4096 components = -0.00220051 Jy ! Clean residual min=-0.000544 max=0.000632 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.119481 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 453 components and 0.119481 Jy ![Exited script file: muppet] wmap "J2228-0753_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 7.811 at -1.765 degrees (North through East) ! Clean map min=-0.0026871 max=0.094578 Jy/beam ! Writing clean map to FITS file: J2228-0753_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0945778 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194223 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616074 0.616074 1.23215 2.46429 4.92859 9.85718 19.7144 39.4287 78.8574 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 7.811 at -1.765 degrees (North through East) ! Clean map min=-0.0026871 max=0.094578 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2228-0753_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:15:42 2019