! Started logfile: J2228+2503_S_2017_02_19_pus_uvs.log on Sat May 4 19:00:10 2019 obs J2228+2503_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2228+2503_S_2017_02_19_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764405 visibilities/baseline/integration-bin. ! Found source: J2228+2503 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 15548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2228+2503_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 482 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923395Jy sigma=0.007735 ! Fit after self-cal, rms=0.914195Jy sigma=0.007666 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=5.747 mas, bpa=-6.848 degrees ! Estimated noise=1014.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696031 Jy ! Component: 100 - total flux cleaned = 0.0847919 Jy ! Total flux subtracted in 100 components = 0.0847919 Jy ! Clean residual min=-0.003038 max=0.004309 Jy/beam ! Clean residual mean=-0.000006 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0847919 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0847919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087470Jy sigma=0.000667 ! Fit after self-cal, rms=0.087466Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=6.4 mas, bpa=-5.486 degrees ! Estimated noise=746.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420288 Jy ! Component: 100 - total flux cleaned = 0.00624337 Jy ! Component: 150 - total flux cleaned = 0.00743245 Jy ! Component: 200 - total flux cleaned = 0.00819531 Jy ! Total flux subtracted in 200 components = 0.00819531 Jy ! Clean residual min=-0.002806 max=0.002643 Jy/beam ! Clean residual mean=-0.000005 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0929872 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.0929872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087218Jy sigma=0.000666 ! Fit after self-cal, rms=0.087198Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.96 KP 1.04 ! LA 1.03 MK 0.96 NL 0.89 OV 1.12 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.01 KP 0.98 ! LA 1.02 MK 0.96 NL 1.09 OV 1.06 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 0.98 KP 0.87 ! LA 0.79 MK 1.04 NL 1.24 OV 1.00 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 0.90 KP 1.00* ! LA 0.86 MK 1.30 NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.087198Jy sigma=0.000666 ! Fit after self-cal, rms=0.086358Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=6.42 mas, bpa=-5.233 degrees ! Estimated noise=745.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455917 Jy ! Component: 100 - total flux cleaned = 0.000500243 Jy ! Component: 150 - total flux cleaned = 0.000517337 Jy ! Component: 200 - total flux cleaned = 0.000509899 Jy ! Total flux subtracted in 200 components = 0.000509899 Jy ! Clean residual min=-0.002176 max=0.002141 Jy/beam ! Clean residual mean=0.000000 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0934971 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0934971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086356Jy sigma=0.000660 ! Fit after self-cal, rms=0.086398Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086398Jy sigma=0.000660 ! Fit after self-cal, rms=0.088032Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=6.436 mas, bpa=-5.302 degrees ! Estimated noise=745.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43562e-05 Jy ! Component: 100 - total flux cleaned = 4.5129e-05 Jy ! Component: 150 - total flux cleaned = 7.28753e-05 Jy ! Component: 200 - total flux cleaned = 9.023e-05 Jy ! Total flux subtracted in 200 components = 9.023e-05 Jy ! Clean residual min=-0.001847 max=0.001828 Jy/beam ! Clean residual mean=-0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0935874 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0935874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088031Jy sigma=0.000657 ! Fit after self-cal, rms=0.088074Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18887e-05 Jy ! Component: 100 - total flux cleaned = 5.22459e-05 Jy ! Component: 150 - total flux cleaned = 4.76931e-05 Jy ! Component: 200 - total flux cleaned = 4.35251e-05 Jy ! Total flux subtracted in 200 components = 4.35251e-05 Jy ! Clean residual min=-0.001878 max=0.001835 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0936309 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0936309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088073Jy sigma=0.000657 ! Fit after self-cal, rms=0.088074Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088074Jy sigma=0.000657 ! Fit after self-cal, rms=0.088274Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=6.442 mas, bpa=-5.314 degrees ! Estimated noise=745.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.0615e-05 Jy ! Component: 100 - total flux cleaned = 7.90488e-05 Jy ! Component: 150 - total flux cleaned = 8.43798e-05 Jy ! Component: 200 - total flux cleaned = 9.3595e-05 Jy ! Total flux subtracted in 200 components = 9.3595e-05 Jy ! Clean residual min=-0.001875 max=0.001831 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0937245 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0937245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088272Jy sigma=0.000657 ! Fit after self-cal, rms=0.088276Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10069e-05 Jy ! Component: 100 - total flux cleaned = 2.36116e-05 Jy ! Component: 150 - total flux cleaned = 2.75067e-05 Jy ! Component: 200 - total flux cleaned = 3.13512e-05 Jy ! Total flux subtracted in 200 components = 3.13512e-05 Jy ! Clean residual min=-0.001873 max=0.001833 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0937558 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0937558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088276Jy sigma=0.000657 ! Fit after self-cal, rms=0.088276Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088276Jy sigma=0.000657 ! Fit after self-cal, rms=0.088329Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.543 mas, bmaj=9.065 mas, bpa=-1.531 degrees ! Estimated noise=1006.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.03363e-05 Jy ! Component: 100 - total flux cleaned = 4.29888e-05 Jy ! Component: 150 - total flux cleaned = 8.69715e-05 Jy ! Component: 200 - total flux cleaned = 0.00012732 Jy ! Total flux subtracted in 200 components = 0.00012732 Jy ! Clean residual min=-0.002140 max=0.001984 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0938832 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.0938832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088329Jy sigma=0.000657 ! Fit after self-cal, rms=0.088327Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.6986e-05 Jy ! Component: 100 - total flux cleaned = 7.508e-06 Jy ! Component: 150 - total flux cleaned = 3.02832e-05 Jy ! Component: 200 - total flux cleaned = 3.06744e-05 Jy ! Total flux subtracted in 200 components = 3.06744e-05 Jy ! Clean residual min=-0.002144 max=0.002000 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0939138 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.0939138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088329Jy sigma=0.000657 ! Fit after self-cal, rms=0.088328Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=6.445 mas, bpa=-5.329 degrees ! Estimated noise=746.214 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 6.445 at -5.329 degrees (North through East) ! Clean map min=-0.0018021 max=0.08844 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=5.788 mas, bpa=-6.688 degrees ! Estimated noise=1008.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06913 Jy ! Component: 100 - total flux cleaned = 0.0842601 Jy ! Component: 150 - total flux cleaned = 0.088437 Jy ! Component: 200 - total flux cleaned = 0.0904983 Jy ! Total flux subtracted in 200 components = 0.0904983 Jy ! Clean residual min=-0.002289 max=0.002403 Jy/beam ! Clean residual mean=-0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0904984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0904984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=6.445 mas, bpa=-5.329 degrees ! Estimated noise=746.214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160006 Jy ! Component: 100 - total flux cleaned = 0.00248862 Jy ! Component: 150 - total flux cleaned = 0.00297939 Jy ! Component: 200 - total flux cleaned = 0.0030431 Jy ! Total flux subtracted in 200 components = 0.0030431 Jy ! Clean residual min=-0.001921 max=0.001855 Jy/beam ! Clean residual mean=-0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0935414 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0935414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.543 mas, bmaj=9.065 mas, bpa=-1.531 degrees ! Estimated noise=1006.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176131 Jy ! Component: 100 - total flux cleaned = 0.000229025 Jy ! Component: 150 - total flux cleaned = 0.00026548 Jy ! Component: 200 - total flux cleaned = 0.000298963 Jy ! Total flux subtracted in 200 components = 0.000298963 Jy ! Clean residual min=-0.002125 max=0.001963 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0938404 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10077e-05 Jy ! Component: 100 - total flux cleaned = 4.14078e-05 Jy ! Component: 150 - total flux cleaned = 4.15596e-05 Jy ! Component: 200 - total flux cleaned = 5.04236e-05 Jy ! Total flux subtracted in 200 components = 5.04236e-05 Jy ! Clean residual min=-0.002127 max=0.001975 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0938908 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0938908 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=6.445 mas, bpa=-5.329 degrees ! Estimated noise=746.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.79335e-06 Jy ! Component: 100 - total flux cleaned = -6.81317e-05 Jy ! Component: 150 - total flux cleaned = -7.96777e-05 Jy ! Component: 200 - total flux cleaned = -8.97182e-05 Jy ! Total flux subtracted in 200 components = -8.97182e-05 Jy ! Clean residual min=-0.001907 max=0.001864 Jy/beam ! Clean residual mean=-0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0938011 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0938011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088330Jy sigma=0.000657 ! Fit after self-cal, rms=0.088328Jy sigma=0.000657 wmodel J2228+2503_S_2017_02_19_pus_map.mod ! Writing 50 model components to file: J2228+2503_S_2017_02_19_pus_map.mod wobs J2228+2503_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2228+2503_S_2017_02_19_pus_uvs.fits wwins J2228+2503_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J2228+2503_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170555 Jy ! Component: 100 - total flux cleaned = -0.000383634 Jy ! Component: 150 - total flux cleaned = -0.000557292 Jy ! Component: 200 - total flux cleaned = -0.000667832 Jy ! Component: 250 - total flux cleaned = -0.00074893 Jy ! Component: 300 - total flux cleaned = -0.000855127 Jy ! Component: 350 - total flux cleaned = -0.00101023 Jy ! Component: 400 - total flux cleaned = -0.00111124 Jy ! Component: 450 - total flux cleaned = -0.00118542 Jy ! Component: 500 - total flux cleaned = -0.00125877 Jy ! Component: 550 - total flux cleaned = -0.0012355 Jy ! Component: 600 - total flux cleaned = -0.00130576 Jy ! Component: 650 - total flux cleaned = -0.00132806 Jy ! Component: 700 - total flux cleaned = -0.00121489 Jy ! Component: 750 - total flux cleaned = -0.00123769 Jy ! Component: 800 - total flux cleaned = -0.0012594 Jy ! Component: 850 - total flux cleaned = -0.00117296 Jy ! Component: 900 - total flux cleaned = -0.00115189 Jy ! Component: 950 - total flux cleaned = -0.00113102 Jy ! Component: 1000 - total flux cleaned = -0.00104809 Jy ! Component: 1050 - total flux cleaned = -0.00100729 Jy ! Component: 1100 - total flux cleaned = -0.000946642 Jy ! Component: 1150 - total flux cleaned = -0.000866685 Jy ! Component: 1200 - total flux cleaned = -0.000787728 Jy ! Component: 1250 - total flux cleaned = -0.00068986 Jy ! Component: 1300 - total flux cleaned = -0.000612326 Jy ! Component: 1350 - total flux cleaned = -0.000497289 Jy ! Component: 1400 - total flux cleaned = -0.000421501 Jy ! Component: 1450 - total flux cleaned = -0.000365513 Jy ! Component: 1500 - total flux cleaned = -0.000291384 Jy ! Component: 1550 - total flux cleaned = -0.000199595 Jy ! Component: 1600 - total flux cleaned = -0.000126744 Jy ! Component: 1650 - total flux cleaned = -5.48366e-05 Jy ! Component: 1700 - total flux cleaned = 1.64335e-05 Jy ! Component: 1750 - total flux cleaned = 0.000122488 Jy ! Component: 1800 - total flux cleaned = 0.000210247 Jy ! Component: 1850 - total flux cleaned = 0.00031451 Jy ! Component: 1900 - total flux cleaned = 0.000383408 Jy ! Component: 1950 - total flux cleaned = 0.000485657 Jy ! Component: 2000 - total flux cleaned = 0.000587128 Jy ! Component: 2050 - total flux cleaned = 0.000704533 Jy ! Component: 2100 - total flux cleaned = 0.000737842 Jy ! Component: 2150 - total flux cleaned = 0.000820721 Jy ! Component: 2200 - total flux cleaned = 0.00088659 Jy ! Component: 2250 - total flux cleaned = 0.000984372 Jy ! Component: 2300 - total flux cleaned = 0.00109748 Jy ! Component: 2350 - total flux cleaned = 0.00111358 Jy ! Component: 2400 - total flux cleaned = 0.00116115 Jy ! Component: 2450 - total flux cleaned = 0.00127166 Jy ! Component: 2500 - total flux cleaned = 0.00136592 Jy ! Component: 2550 - total flux cleaned = 0.00142803 Jy ! Component: 2600 - total flux cleaned = 0.00153626 Jy ! Component: 2650 - total flux cleaned = 0.00159743 Jy ! Component: 2700 - total flux cleaned = 0.00168856 Jy ! Component: 2750 - total flux cleaned = 0.00171874 Jy ! Component: 2800 - total flux cleaned = 0.00183899 Jy ! Component: 2850 - total flux cleaned = 0.00191341 Jy ! Component: 2900 - total flux cleaned = 0.00201696 Jy ! Component: 2950 - total flux cleaned = 0.00206104 Jy ! Component: 3000 - total flux cleaned = 0.00219234 Jy ! Component: 3050 - total flux cleaned = 0.00230808 Jy ! Component: 3100 - total flux cleaned = 0.00237997 Jy ! Component: 3150 - total flux cleaned = 0.00245133 Jy ! Component: 3200 - total flux cleaned = 0.00255074 Jy ! Component: 3250 - total flux cleaned = 0.00269165 Jy ! Component: 3300 - total flux cleaned = 0.00274771 Jy ! Component: 3350 - total flux cleaned = 0.00281712 Jy ! Component: 3400 - total flux cleaned = 0.00290026 Jy ! Component: 3450 - total flux cleaned = 0.0030789 Jy ! Component: 3500 - total flux cleaned = 0.00313348 Jy ! Component: 3550 - total flux cleaned = 0.00326921 Jy ! Component: 3600 - total flux cleaned = 0.00337712 Jy ! Component: 3650 - total flux cleaned = 0.0034709 Jy ! Component: 3700 - total flux cleaned = 0.00352421 Jy ! Component: 3750 - total flux cleaned = 0.00361702 Jy ! Component: 3800 - total flux cleaned = 0.00366976 Jy ! Component: 3850 - total flux cleaned = 0.00381385 Jy ! Component: 3900 - total flux cleaned = 0.00387894 Jy ! Component: 3950 - total flux cleaned = 0.00399553 Jy ! Component: 4000 - total flux cleaned = 0.00408549 Jy ! Component: 4050 - total flux cleaned = 0.00412379 Jy ! Total flux subtracted in 4096 components = 0.00423833 Jy ! Clean residual min=-0.000807 max=0.000814 Jy/beam ! Clean residual mean=-0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.0980394 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 379 components and 0.0980394 Jy ![Exited script file: muppet] wmap "J2228+2503_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 6.445 at -5.329 degrees (North through East) ! Clean map min=-0.0015333 max=0.088315 Jy/beam ! Writing clean map to FITS file: J2228+2503_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0883146 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.818566 0.818566 1.63713 3.27426 6.54853 13.0971 26.1941 52.3882 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 6.445 at -5.329 degrees (North through East) ! Clean map min=-0.0015333 max=0.088315 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2228+2503_S_2017_02_19_pus_uvs.log closed on Sat May 4 19:00:15 2019