! Started logfile: J2225-0457_X_2017_04_28_pus_uvs.log on Mon Apr 29 14:33:46 2019
obs J2225-0457_X_2017_04_28_pus_uva.fits
! Reading UV FITS file: J2225-0457_X_2017_04_28_pus_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.352222 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2225-0457
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 907 lines of history.
! 
! Reading 7608 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J2225-0457_X_2017_04_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 254 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.534516Jy  sigma=0.004169
! Fit after  self-cal, rms=0.534074Jy  sigma=0.004143
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6962 mas, bmaj=1.642 mas, bpa=-0.4209 degrees
! Estimated noise=1609.81 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.843858 Jy
! Component: 100  -  total flux cleaned = 1.07179 Jy
! Total flux subtracted in 100 components = 1.07179 Jy
! Clean residual min=-0.073658 max=0.180409 Jy/beam
! Clean residual mean=-0.000880 rms=0.023973 Jy/beam
! Combined flux in latest and established models = 1.07179 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.07179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.503290Jy  sigma=0.003884
! Fit after  self-cal, rms=0.502810Jy  sigma=0.003881
! Inverting map 
! Added new window around map position (2.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191421 Jy
! Component: 100  -  total flux cleaned = 0.323899 Jy
! Total flux subtracted in 100 components = 0.323899 Jy
! Clean residual min=-0.063558 max=0.102938 Jy/beam
! Clean residual mean=-0.000640 rms=0.016944 Jy/beam
! Combined flux in latest and established models = 1.39569 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 1.39569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.347631Jy  sigma=0.002714
! Fit after  self-cal, rms=0.345589Jy  sigma=0.002677
! Inverting map 
! Added new window around map position (1.2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119175 Jy
! Component: 100  -  total flux cleaned = 0.207844 Jy
! Total flux subtracted in 100 components = 0.207844 Jy
! Clean residual min=-0.047434 max=0.053495 Jy/beam
! Clean residual mean=-0.000431 rms=0.012384 Jy/beam
! Combined flux in latest and established models = 1.60353 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 1.60353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.258323Jy  sigma=0.001990
! Fit after  self-cal, rms=0.256945Jy  sigma=0.001969
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8585 mas, bmaj=1.894 mas, bpa=2.483 degrees
! Estimated noise=1070.51 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123743 Jy
! Component: 100  -  total flux cleaned = 0.205495 Jy
! Component: 150  -  total flux cleaned = 0.261385 Jy
! Component: 200  -  total flux cleaned = 0.300332 Jy
! Total flux subtracted in 200 components = 0.300332 Jy
! Clean residual min=-0.032103 max=0.037372 Jy/beam
! Clean residual mean=-0.000301 rms=0.008741 Jy/beam
! Combined flux in latest and established models = 1.90386 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 56 components and 1.90386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.181438Jy  sigma=0.001263
! Fit after  self-cal, rms=0.178681Jy  sigma=0.001229
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.99     OV        1.02     
!   PT        0.94     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.03     KP        0.94     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.03     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.99     KP        0.97     
!   LA        1.03     MK        1.02     NL        0.98     OV        1.01     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        1.01     KP        0.96     
!   LA        1.01     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.95     HN        0.99     KP        0.97     
!   LA        1.03     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.03     KP        0.97     
!   LA        1.05     MK        1.03     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.04     KP        0.98     
!   LA        0.97     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.05     KP        0.96     
!   LA        1.04     MK        1.00     NL        0.98     OV        1.00     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.00     KP        0.99     
!   LA        1.05     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.00     KP        0.99     
!   LA        1.06     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.02     KP        0.93     
!   LA        1.02     MK        1.03     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.178681Jy  sigma=0.001229
! Fit after  self-cal, rms=0.163382Jy  sigma=0.001098
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.871 mas, bmaj=1.908 mas, bpa=2.481 degrees
! Estimated noise=1048.88 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00930089 Jy
! Component: 100  -  total flux cleaned = 0.00932843 Jy
! Component: 150  -  total flux cleaned = 0.00884155 Jy
! Component: 200  -  total flux cleaned = 0.00883182 Jy
! Total flux subtracted in 200 components = 0.00883182 Jy
! Clean residual min=-0.025879 max=0.024811 Jy/beam
! Clean residual mean=-0.000140 rms=0.006517 Jy/beam
! Combined flux in latest and established models = 1.91269 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 68 components and 1.91269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.159014Jy  sigma=0.001063
! Fit after  self-cal, rms=0.158819Jy  sigma=0.001060
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.158819Jy  sigma=0.001060
! Fit after  self-cal, rms=0.123410Jy  sigma=0.000779
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8735 mas, bmaj=1.919 mas, bpa=2.18 degrees
! Estimated noise=1048.36 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014042 Jy
! Component: 100  -  total flux cleaned = 0.0157392 Jy
! Component: 150  -  total flux cleaned = 0.0169626 Jy
! Component: 200  -  total flux cleaned = 0.0179462 Jy
! Total flux subtracted in 200 components = 0.0179462 Jy
! Clean residual min=-0.012209 max=0.018491 Jy/beam
! Clean residual mean=-0.000028 rms=0.003233 Jy/beam
! Combined flux in latest and established models = 1.93064 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 1.93064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121359Jy  sigma=0.000759
! Fit after  self-cal, rms=0.121387Jy  sigma=0.000757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181705 Jy
! Component: 100  -  total flux cleaned = 0.0254895 Jy
! Component: 150  -  total flux cleaned = 0.0262161 Jy
! Component: 200  -  total flux cleaned = 0.0266391 Jy
! Total flux subtracted in 200 components = 0.0266391 Jy
! Clean residual min=-0.010607 max=0.010581 Jy/beam
! Clean residual mean=-0.000021 rms=0.002580 Jy/beam
! Combined flux in latest and established models = 1.95728 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 1.95728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.118710Jy  sigma=0.000728
! Fit after  self-cal, rms=0.118440Jy  sigma=0.000725
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.118440Jy  sigma=0.000725
! Fit after  self-cal, rms=0.118205Jy  sigma=0.000719
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=1.919 mas, bpa=2.113 degrees
! Estimated noise=1046.75 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094347 Jy
! Component: 100  -  total flux cleaned = 0.0135047 Jy
! Component: 150  -  total flux cleaned = 0.0146887 Jy
! Component: 200  -  total flux cleaned = 0.0153794 Jy
! Total flux subtracted in 200 components = 0.0153794 Jy
! Clean residual min=-0.008845 max=0.008179 Jy/beam
! Clean residual mean=-0.000023 rms=0.002224 Jy/beam
! Combined flux in latest and established models = 1.97266 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 1.97266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117240Jy  sigma=0.000709
! Fit after  self-cal, rms=0.117153Jy  sigma=0.000708
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321029 Jy
! Component: 100  -  total flux cleaned = 0.00420366 Jy
! Component: 150  -  total flux cleaned = 0.00449929 Jy
! Component: 200  -  total flux cleaned = 0.0045055 Jy
! Total flux subtracted in 200 components = 0.0045055 Jy
! Clean residual min=-0.008157 max=0.007947 Jy/beam
! Clean residual mean=-0.000019 rms=0.002133 Jy/beam
! Combined flux in latest and established models = 1.97716 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 117 components and 1.97716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116801Jy  sigma=0.000703
! Fit after  self-cal, rms=0.116773Jy  sigma=0.000703
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116773Jy  sigma=0.000703
! Fit after  self-cal, rms=0.116700Jy  sigma=0.000701
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=3.229 mas, bpa=-0.5461 degrees
! Estimated noise=1428.55 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846381 Jy
! Component: 100  -  total flux cleaned = 0.0099433 Jy
! Component: 150  -  total flux cleaned = 0.0102943 Jy
! Component: 200  -  total flux cleaned = 0.0104896 Jy
! Total flux subtracted in 200 components = 0.0104896 Jy
! Clean residual min=-0.009653 max=0.012062 Jy/beam
! Clean residual mean=-0.000062 rms=0.002994 Jy/beam
! Combined flux in latest and established models = 1.98765 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 1.98765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116630Jy  sigma=0.000700
! Fit after  self-cal, rms=0.116543Jy  sigma=0.000698
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107678 Jy
! Component: 100  -  total flux cleaned = 0.00208939 Jy
! Component: 150  -  total flux cleaned = 0.00272073 Jy
! Component: 200  -  total flux cleaned = 0.00286455 Jy
! Total flux subtracted in 200 components = 0.00286455 Jy
! Clean residual min=-0.009886 max=0.011493 Jy/beam
! Clean residual mean=-0.000055 rms=0.002968 Jy/beam
! Combined flux in latest and established models = 1.99052 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 137 components and 1.99052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116551Jy  sigma=0.000698
! Fit after  self-cal, rms=0.116508Jy  sigma=0.000697
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8736 mas, bmaj=1.919 mas, bpa=2.039 degrees
! Estimated noise=1046.06 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8736 x 1.919 at 2.039 degrees (North through East)
! Clean map  min=-0.0070264  max=1.1123 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116508Jy  sigma=0.000697
! Fit after  self-cal, rms=0.111058Jy  sigma=0.000655
! Inverting map and beam 
! Estimated beam: bmin=0.8747 mas, bmaj=1.919 mas, bpa=1.982 degrees
! Estimated noise=1047.42 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241238 Jy
! Component: 100  -  total flux cleaned = 0.00227873 Jy
! Component: 150  -  total flux cleaned = 0.00227164 Jy
! Component: 200  -  total flux cleaned = 0.00237797 Jy
! Total flux subtracted in 200 components = 0.00237797 Jy
! Clean residual min=-0.006736 max=0.007407 Jy/beam
! Clean residual mean=-0.000022 rms=0.001845 Jy/beam
! Combined flux in latest and established models = 1.9929 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 143 components and 1.9929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110727Jy  sigma=0.000652
! Fit after  self-cal, rms=0.110716Jy  sigma=0.000652
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000406769 Jy
! Component: 100  -  total flux cleaned = 0.000988544 Jy
! Component: 150  -  total flux cleaned = 0.00116491 Jy
! Component: 200  -  total flux cleaned = 0.00124707 Jy
! Total flux subtracted in 200 components = 0.00124707 Jy
! Clean residual min=-0.006678 max=0.007331 Jy/beam
! Clean residual mean=-0.000021 rms=0.001819 Jy/beam
! Combined flux in latest and established models = 1.99414 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 147 components and 1.99414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110583Jy  sigma=0.000650
! Fit after  self-cal, rms=0.110583Jy  sigma=0.000650
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110583Jy  sigma=0.000650
! Fit after  self-cal, rms=0.110576Jy  sigma=0.000649
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7103 mas, bmaj=1.659 mas, bpa=-0.994 degrees
! Estimated noise=1587.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.828544 Jy
! Component: 100  -  total flux cleaned = 1.08661 Jy
! Component: 150  -  total flux cleaned = 1.266 Jy
! Component: 200  -  total flux cleaned = 1.40188 Jy
! Total flux subtracted in 200 components = 1.40188 Jy
! Clean residual min=-0.038275 max=0.079099 Jy/beam
! Clean residual mean=-0.000494 rms=0.012814 Jy/beam
! Combined flux in latest and established models = 1.40188 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 1.40188 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=1.92 mas, bpa=1.925 degrees
! Estimated noise=1047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172565 Jy
! Component: 100  -  total flux cleaned = 0.284945 Jy
! Component: 150  -  total flux cleaned = 0.362157 Jy
! Component: 200  -  total flux cleaned = 0.417517 Jy
! Total flux subtracted in 200 components = 0.417517 Jy
! Clean residual min=-0.015636 max=0.031105 Jy/beam
! Clean residual mean=-0.000199 rms=0.006081 Jy/beam
! Combined flux in latest and established models = 1.8194 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 52 components and 1.8194 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0402599 Jy
! Component: 100  -  total flux cleaned = 0.0702917 Jy
! Component: 150  -  total flux cleaned = 0.0934011 Jy
! Component: 200  -  total flux cleaned = 0.111366 Jy
! Total flux subtracted in 200 components = 0.111366 Jy
! Clean residual min=-0.008645 max=0.011105 Jy/beam
! Clean residual mean=-0.000076 rms=0.002818 Jy/beam
! Combined flux in latest and established models = 1.93076 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 75 components and 1.93076 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.089 mas, bmaj=3.23 mas, bpa=-0.6461 degrees
! Estimated noise=1428.41 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024513 Jy
! Component: 100  -  total flux cleaned = 0.0389017 Jy
! Component: 150  -  total flux cleaned = 0.0483027 Jy
! Component: 200  -  total flux cleaned = 0.0547539 Jy
! Total flux subtracted in 200 components = 0.0547539 Jy
! Clean residual min=-0.010079 max=0.011400 Jy/beam
! Clean residual mean=-0.000072 rms=0.002939 Jy/beam
! Combined flux in latest and established models = 1.98552 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452437 Jy
! Component: 100  -  total flux cleaned = 0.00681136 Jy
! Component: 150  -  total flux cleaned = 0.00799417 Jy
! Component: 200  -  total flux cleaned = 0.00906619 Jy
! Total flux subtracted in 200 components = 0.00906619 Jy
! Clean residual min=-0.009253 max=0.011272 Jy/beam
! Clean residual mean=-0.000058 rms=0.002816 Jy/beam
! Combined flux in latest and established models = 1.99458 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 118 components and 1.99458 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=1.92 mas, bpa=1.925 degrees
! Estimated noise=1047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000804126 Jy
! Component: 100  -  total flux cleaned = 0.00116796 Jy
! Component: 150  -  total flux cleaned = 0.00147619 Jy
! Component: 200  -  total flux cleaned = 0.00160714 Jy
! Total flux subtracted in 200 components = 0.00160714 Jy
! Clean residual min=-0.007132 max=0.008164 Jy/beam
! Clean residual mean=-0.000021 rms=0.001862 Jy/beam
! Combined flux in latest and established models = 1.99619 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 139 components and 1.99619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111015Jy  sigma=0.000654
! Fit after  self-cal, rms=0.110895Jy  sigma=0.000653
wmodel J2225-0457_X_2017_04_28_pus_map.mod
! Writing 139 model components to file: J2225-0457_X_2017_04_28_pus_map.mod
wobs J2225-0457_X_2017_04_28_pus_uvs.fits
! Writing UV FITS file: J2225-0457_X_2017_04_28_pus_uvs.fits
wwins J2225-0457_X_2017_04_28_pus_map.win
! wwins: Wrote 4 windows to J2225-0457_X_2017_04_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027131 Jy
! Component: 100  -  total flux cleaned = 0.00310779 Jy
! Component: 150  -  total flux cleaned = 0.00402289 Jy
! Component: 200  -  total flux cleaned = 0.00520836 Jy
! Component: 250  -  total flux cleaned = 0.0059247 Jy
! Component: 300  -  total flux cleaned = 0.00651461 Jy
! Component: 350  -  total flux cleaned = 0.00689383 Jy
! Component: 400  -  total flux cleaned = 0.00671441 Jy
! Component: 450  -  total flux cleaned = 0.00715433 Jy
! Component: 500  -  total flux cleaned = 0.0072369 Jy
! Component: 550  -  total flux cleaned = 0.00740064 Jy
! Component: 600  -  total flux cleaned = 0.00748187 Jy
! Component: 650  -  total flux cleaned = 0.00795628 Jy
! Component: 700  -  total flux cleaned = 0.00826261 Jy
! Component: 750  -  total flux cleaned = 0.00841272 Jy
! Component: 800  -  total flux cleaned = 0.00856241 Jy
! Component: 850  -  total flux cleaned = 0.00892409 Jy
! Component: 900  -  total flux cleaned = 0.00892312 Jy
! Component: 950  -  total flux cleaned = 0.00913024 Jy
! Component: 1000  -  total flux cleaned = 0.00919801 Jy
! Component: 1050  -  total flux cleaned = 0.0091987 Jy
! Component: 1100  -  total flux cleaned = 0.00933019 Jy
! Component: 1150  -  total flux cleaned = 0.00958757 Jy
! Component: 1200  -  total flux cleaned = 0.00971322 Jy
! Component: 1250  -  total flux cleaned = 0.00983611 Jy
! Component: 1300  -  total flux cleaned = 0.00983577 Jy
! Component: 1350  -  total flux cleaned = 0.0101368 Jy
! Component: 1400  -  total flux cleaned = 0.0103717 Jy
! Component: 1450  -  total flux cleaned = 0.010313 Jy
! Component: 1500  -  total flux cleaned = 0.0104852 Jy
! Component: 1550  -  total flux cleaned = 0.0105986 Jy
! Component: 1600  -  total flux cleaned = 0.010819 Jy
! Component: 1650  -  total flux cleaned = 0.0108734 Jy
! Component: 1700  -  total flux cleaned = 0.0109807 Jy
! Component: 1750  -  total flux cleaned = 0.0112451 Jy
! Component: 1800  -  total flux cleaned = 0.0112446 Jy
! Component: 1850  -  total flux cleaned = 0.0113477 Jy
! Component: 1900  -  total flux cleaned = 0.0114486 Jy
! Component: 1950  -  total flux cleaned = 0.0114493 Jy
! Component: 2000  -  total flux cleaned = 0.0115479 Jy
! Total flux subtracted in 2048 components = 0.0117933 Jy
! Clean residual min=-0.002686 max=0.002555 Jy/beam
! Clean residual mean=-0.000024 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 2.00798 Jy
keep
! Adding 150 model components to the UV plane model.
! The established model now contains 289 components and 2.00798 Jy
![Exited script file: muppet]
wmap "J2225-0457_X_2017_04_28_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8749 x 1.92 at 1.925 degrees (North through East)
! Clean map  min=-0.0044698  max=1.1104 Jy/beam
! Writing clean map to FITS file: J2225-0457_X_2017_04_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.11042 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000955886 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.258251 0.258251 0.516502 1.033 2.06601 4.13201 8.26403 16.5281 33.0561 66.1122
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.11 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8749 x 1.92 at 1.925 degrees (North through East)
! Clean map  min=-0.0044698  max=1.1104 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J2225-0457_X_2017_04_28_pus_uvs.log closed on Mon Apr 29 14:33:47 2019