! Started logfile: J2225-0457_X_2017_02_24_pus_uvs.log on Sat May 4 10:07:46 2019 obs J2225-0457_X_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2225-0457_X_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.836111 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1882 lines of history. ! ! Reading 7224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2225-0457_X_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.642750Jy sigma=0.005422 ! Fit after self-cal, rms=0.628622Jy sigma=0.005311 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6768 mas, bmaj=1.719 mas, bpa=-2.157 degrees ! Estimated noise=1498.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.94991 Jy ! Component: 100 - total flux cleaned = 1.19567 Jy ! Total flux subtracted in 100 components = 1.19567 Jy ! Clean residual min=-0.080305 max=0.200602 Jy/beam ! Clean residual mean=-0.000837 rms=0.025671 Jy/beam ! Combined flux in latest and established models = 1.19567 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.19567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.537800Jy sigma=0.004547 ! Fit after self-cal, rms=0.537688Jy sigma=0.004544 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (2.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207909 Jy ! Component: 100 - total flux cleaned = 0.345817 Jy ! Total flux subtracted in 100 components = 0.345817 Jy ! Clean residual min=-0.063502 max=0.131222 Jy/beam ! Clean residual mean=-0.000596 rms=0.017956 Jy/beam ! Combined flux in latest and established models = 1.54148 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 1.54148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.378095Jy sigma=0.003166 ! Fit after self-cal, rms=0.373946Jy sigma=0.003134 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (1.4, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139602 Jy ! Component: 100 - total flux cleaned = 0.236238 Jy ! Total flux subtracted in 100 components = 0.236238 Jy ! Clean residual min=-0.049815 max=0.056943 Jy/beam ! Clean residual mean=-0.000394 rms=0.012386 Jy/beam ! Combined flux in latest and established models = 1.77772 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 1.77772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267159Jy sigma=0.002222 ! Fit after self-cal, rms=0.262437Jy sigma=0.002184 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8363 mas, bmaj=1.976 mas, bpa=-0.1937 degrees ! Estimated noise=1008.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144789 Jy ! Component: 100 - total flux cleaned = 0.239478 Jy ! Component: 150 - total flux cleaned = 0.304846 Jy ! Component: 200 - total flux cleaned = 0.351893 Jy ! Total flux subtracted in 200 components = 0.351893 Jy ! Clean residual min=-0.030188 max=0.038922 Jy/beam ! Clean residual mean=-0.000271 rms=0.008786 Jy/beam ! Combined flux in latest and established models = 2.12962 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 2.12962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144338Jy sigma=0.001175 ! Fit after self-cal, rms=0.137417Jy sigma=0.001117 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.05 KP 0.94 ! LA 1.03 MK 1.00 NL 1.00 OV 0.99 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.03 KP 0.95 ! LA 1.04 MK 1.00 NL 1.01 OV 0.99 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.03 KP 0.93 ! LA 1.01 MK 1.03 NL 1.01 OV 0.99 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.06 KP 0.93 ! LA 1.01 MK 1.03 NL 1.01 OV 1.00 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.01 KP 0.93 ! LA 1.00 MK 1.05 NL 1.00 OV 0.98 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.04 KP 0.92 ! LA 1.05 MK 1.01 NL 1.00 OV 0.99 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.03 KP 0.92 ! LA 1.00 MK 1.04 NL 1.00 OV 0.99 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.03 KP 0.92 ! LA 1.04 MK 1.02 NL 1.01 OV 1.00 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.02 KP 0.93 ! LA 1.00 MK 1.00 NL 1.00 OV 1.00 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.02 KP 0.93 ! LA 1.01 MK 1.02 NL 1.01 OV 0.99 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.05 KP 0.92 ! LA 1.01 MK 1.05 NL 1.00 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 0.96 ! LA 1.00 MK 1.00 NL 1.00 OV 1.00 ! PT 0.96 SC 1.02 ! ! ! Fit before self-cal, rms=0.137417Jy sigma=0.001117 ! Fit after self-cal, rms=0.110969Jy sigma=0.000920 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8453 mas, bmaj=1.987 mas, bpa=0.06474 degrees ! Estimated noise=992.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313654 Jy ! Component: 100 - total flux cleaned = 0.0438469 Jy ! Component: 150 - total flux cleaned = 0.0478226 Jy ! Component: 200 - total flux cleaned = 0.0492085 Jy ! Total flux subtracted in 200 components = 0.0492085 Jy ! Clean residual min=-0.012261 max=0.017506 Jy/beam ! Clean residual mean=-0.000014 rms=0.003944 Jy/beam ! Combined flux in latest and established models = 2.17882 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 82 components and 2.17882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100984Jy sigma=0.000826 ! Fit after self-cal, rms=0.099951Jy sigma=0.000818 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099951Jy sigma=0.000818 ! Fit after self-cal, rms=0.097582Jy sigma=0.000801 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8448 mas, bmaj=1.987 mas, bpa=-0.01172 degrees ! Estimated noise=990.994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014985 Jy ! Component: 100 - total flux cleaned = 0.0198269 Jy ! Component: 150 - total flux cleaned = 0.0212892 Jy ! Component: 200 - total flux cleaned = 0.0222746 Jy ! Total flux subtracted in 200 components = 0.0222746 Jy ! Clean residual min=-0.011368 max=0.014374 Jy/beam ! Clean residual mean=-0.000020 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 2.2011 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 98 components and 2.2011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094109Jy sigma=0.000769 ! Fit after self-cal, rms=0.093680Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142239 Jy ! Component: 100 - total flux cleaned = 0.0192568 Jy ! Component: 150 - total flux cleaned = 0.0221299 Jy ! Component: 200 - total flux cleaned = 0.0240787 Jy ! Total flux subtracted in 200 components = 0.0240787 Jy ! Clean residual min=-0.010211 max=0.011806 Jy/beam ! Clean residual mean=-0.000020 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 2.22518 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 113 components and 2.22518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090809Jy sigma=0.000740 ! Fit after self-cal, rms=0.090600Jy sigma=0.000738 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090600Jy sigma=0.000738 ! Fit after self-cal, rms=0.090050Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8451 mas, bmaj=1.987 mas, bpa=-0.07159 degrees ! Estimated noise=990.597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685888 Jy ! Component: 100 - total flux cleaned = 0.0100282 Jy ! Component: 150 - total flux cleaned = 0.0112023 Jy ! Component: 200 - total flux cleaned = 0.0122473 Jy ! Total flux subtracted in 200 components = 0.0122473 Jy ! Clean residual min=-0.008674 max=0.010081 Jy/beam ! Clean residual mean=-0.000023 rms=0.002321 Jy/beam ! Combined flux in latest and established models = 2.23743 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 127 components and 2.23743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088660Jy sigma=0.000722 ! Fit after self-cal, rms=0.088486Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676122 Jy ! Component: 100 - total flux cleaned = 0.0108882 Jy ! Component: 150 - total flux cleaned = 0.0140264 Jy ! Component: 200 - total flux cleaned = 0.0156316 Jy ! Total flux subtracted in 200 components = 0.0156316 Jy ! Clean residual min=-0.008625 max=0.008713 Jy/beam ! Clean residual mean=-0.000026 rms=0.002098 Jy/beam ! Combined flux in latest and established models = 2.25306 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 143 components and 2.25306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087272Jy sigma=0.000711 ! Fit after self-cal, rms=0.087210Jy sigma=0.000710 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (1.6, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868494 Jy ! Component: 100 - total flux cleaned = 0.0140648 Jy ! Component: 150 - total flux cleaned = 0.0179637 Jy ! Component: 200 - total flux cleaned = 0.0204803 Jy ! Total flux subtracted in 200 components = 0.0204803 Jy ! Clean residual min=-0.007712 max=0.007962 Jy/beam ! Clean residual mean=-0.000022 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 2.27354 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 162 components and 2.27354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086083Jy sigma=0.000700 ! Fit after self-cal, rms=0.086052Jy sigma=0.000700 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068044 Jy ! Component: 100 - total flux cleaned = 0.00955967 Jy ! Component: 150 - total flux cleaned = 0.0108186 Jy ! Component: 200 - total flux cleaned = 0.0119579 Jy ! Total flux subtracted in 200 components = 0.0119579 Jy ! Clean residual min=-0.006619 max=0.007217 Jy/beam ! Clean residual mean=-0.000014 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 2.2855 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 182 components and 2.28549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085201Jy sigma=0.000693 ! Fit after self-cal, rms=0.085151Jy sigma=0.000692 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (10.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666273 Jy ! Component: 100 - total flux cleaned = 0.0107256 Jy ! Component: 150 - total flux cleaned = 0.0138262 Jy ! Component: 200 - total flux cleaned = 0.0157457 Jy ! Total flux subtracted in 200 components = 0.0157457 Jy ! Clean residual min=-0.006134 max=0.004742 Jy/beam ! Clean residual mean=-0.000014 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 2.30124 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 206 components and 2.30124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084461Jy sigma=0.000687 ! Fit after self-cal, rms=0.084440Jy sigma=0.000686 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084440Jy sigma=0.000686 ! Fit after self-cal, rms=0.084144Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.181 mas, bmaj=3.544 mas, bpa=-3.375 degrees ! Estimated noise=1280.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315232 Jy ! Component: 100 - total flux cleaned = 0.00676977 Jy ! Component: 150 - total flux cleaned = 0.00990904 Jy ! Component: 200 - total flux cleaned = 0.0122484 Jy ! Total flux subtracted in 200 components = 0.0122484 Jy ! Clean residual min=-0.007804 max=0.006446 Jy/beam ! Clean residual mean=-0.000032 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 2.31349 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 229 components and 2.31349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083928Jy sigma=0.000682 ! Fit after self-cal, rms=0.083889Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969653 Jy ! Component: 100 - total flux cleaned = 0.00270856 Jy ! Component: 150 - total flux cleaned = 0.00396084 Jy ! Component: 200 - total flux cleaned = 0.00491609 Jy ! Total flux subtracted in 200 components = 0.00491609 Jy ! Clean residual min=-0.007388 max=0.005953 Jy/beam ! Clean residual mean=-0.000028 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 2.3184 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 247 components and 2.31841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083796Jy sigma=0.000681 ! Fit after self-cal, rms=0.083767Jy sigma=0.000681 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8452 mas, bmaj=1.987 mas, bpa=-0.09731 degrees ! Estimated noise=989.484 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8452 x 1.987 at -0.09731 degrees (North through East) ! Clean map min=-0.0068445 max=1.2698 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083767Jy sigma=0.000681 ! Fit after self-cal, rms=0.077816Jy sigma=0.000629 ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8457 mas, bmaj=1.988 mas, bpa=-0.1605 degrees ! Estimated noise=989.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194444 Jy ! Component: 100 - total flux cleaned = 0.00341307 Jy ! Component: 150 - total flux cleaned = 0.00412265 Jy ! Component: 200 - total flux cleaned = 0.00487287 Jy ! Total flux subtracted in 200 components = 0.00487287 Jy ! Clean residual min=-0.004786 max=0.004079 Jy/beam ! Clean residual mean=-0.000015 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 2.32328 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 269 components and 2.32328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077522Jy sigma=0.000627 ! Fit after self-cal, rms=0.077509Jy sigma=0.000627 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103458 Jy ! Component: 100 - total flux cleaned = 0.00155676 Jy ! Component: 150 - total flux cleaned = 0.0018877 Jy ! Component: 200 - total flux cleaned = 0.00235604 Jy ! Total flux subtracted in 200 components = 0.00235604 Jy ! Clean residual min=-0.004517 max=0.003937 Jy/beam ! Clean residual mean=-0.000014 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 2.32563 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 287 components and 2.32564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077336Jy sigma=0.000625 ! Fit after self-cal, rms=0.077331Jy sigma=0.000625 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077331Jy sigma=0.000625 ! Fit after self-cal, rms=0.077310Jy sigma=0.000625 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6821 mas, bmaj=1.726 mas, bpa=-2.142 degrees ! Estimated noise=1482.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.937482 Jy ! Component: 100 - total flux cleaned = 1.2248 Jy ! Component: 150 - total flux cleaned = 1.42114 Jy ! Component: 200 - total flux cleaned = 1.56978 Jy ! Total flux subtracted in 200 components = 1.56978 Jy ! Clean residual min=-0.045419 max=0.086720 Jy/beam ! Clean residual mean=-0.000500 rms=0.014284 Jy/beam ! Combined flux in latest and established models = 1.56978 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.56978 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8457 mas, bmaj=1.988 mas, bpa=-0.1775 degrees ! Estimated noise=989.326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195065 Jy ! Component: 100 - total flux cleaned = 0.320603 Jy ! Component: 150 - total flux cleaned = 0.40707 Jy ! Component: 200 - total flux cleaned = 0.467971 Jy ! Total flux subtracted in 200 components = 0.467971 Jy ! Clean residual min=-0.020298 max=0.033960 Jy/beam ! Clean residual mean=-0.000290 rms=0.007659 Jy/beam ! Combined flux in latest and established models = 2.03775 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 49 components and 2.03775 Jy ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432844 Jy ! Component: 100 - total flux cleaned = 0.0749263 Jy ! Component: 150 - total flux cleaned = 0.0999753 Jy ! Component: 200 - total flux cleaned = 0.120325 Jy ! Total flux subtracted in 200 components = 0.120325 Jy ! Clean residual min=-0.012307 max=0.012826 Jy/beam ! Clean residual mean=-0.000117 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 2.15807 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 84 components and 2.15807 Jy ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.18 mas, bmaj=3.546 mas, bpa=-3.454 degrees ! Estimated noise=1279.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278986 Jy ! Component: 100 - total flux cleaned = 0.0467197 Jy ! Component: 150 - total flux cleaned = 0.0616717 Jy ! Component: 200 - total flux cleaned = 0.0742252 Jy ! Total flux subtracted in 200 components = 0.0742252 Jy ! Clean residual min=-0.012256 max=0.012894 Jy/beam ! Clean residual mean=-0.000113 rms=0.004009 Jy/beam ! Combined flux in latest and established models = 2.2323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107406 Jy ! Component: 100 - total flux cleaned = 0.0200552 Jy ! Component: 150 - total flux cleaned = 0.0282276 Jy ! Component: 200 - total flux cleaned = 0.0354404 Jy ! Total flux subtracted in 200 components = 0.0354404 Jy ! Clean residual min=-0.009967 max=0.010708 Jy/beam ! Clean residual mean=-0.000079 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 2.26774 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 168 components and 2.26774 Jy ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8457 mas, bmaj=1.988 mas, bpa=-0.1775 degrees ! Estimated noise=989.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463653 Jy ! Component: 100 - total flux cleaned = 0.00914979 Jy ! Component: 150 - total flux cleaned = 0.0136434 Jy ! Component: 200 - total flux cleaned = 0.0179453 Jy ! Total flux subtracted in 200 components = 0.0179453 Jy ! Clean residual min=-0.006060 max=0.007319 Jy/beam ! Clean residual mean=-0.000020 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 2.28568 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 192 components and 2.28568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080297Jy sigma=0.000648 ! Fit after self-cal, rms=0.079696Jy sigma=0.000644 wmodel J2225-0457_X_2017_02_24_pus_map.mod ! Writing 192 model components to file: J2225-0457_X_2017_02_24_pus_map.mod wobs J2225-0457_X_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2225-0457_X_2017_02_24_pus_uvs.fits wwins J2225-0457_X_2017_02_24_pus_map.win ! wwins: Wrote 9 windows to J2225-0457_X_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178204 Jy ! Component: 100 - total flux cleaned = 0.000998038 Jy ! Component: 150 - total flux cleaned = 0.00138321 Jy ! Component: 200 - total flux cleaned = 0.00174576 Jy ! Component: 250 - total flux cleaned = 0.002442 Jy ! Component: 300 - total flux cleaned = 0.0031138 Jy ! Component: 350 - total flux cleaned = 0.00360272 Jy ! Component: 400 - total flux cleaned = 0.00391829 Jy ! Component: 450 - total flux cleaned = 0.00430186 Jy ! Component: 500 - total flux cleaned = 0.00460223 Jy ! Component: 550 - total flux cleaned = 0.0048212 Jy ! Component: 600 - total flux cleaned = 0.00496692 Jy ! Component: 650 - total flux cleaned = 0.00545664 Jy ! Component: 700 - total flux cleaned = 0.00566283 Jy ! Component: 750 - total flux cleaned = 0.00586392 Jy ! Component: 800 - total flux cleaned = 0.00599631 Jy ! Component: 850 - total flux cleaned = 0.00619167 Jy ! Component: 900 - total flux cleaned = 0.00676104 Jy ! Component: 950 - total flux cleaned = 0.00694743 Jy ! Component: 1000 - total flux cleaned = 0.00694804 Jy ! Component: 1050 - total flux cleaned = 0.00706916 Jy ! Component: 1100 - total flux cleaned = 0.0070699 Jy ! Component: 1150 - total flux cleaned = 0.00735899 Jy ! Component: 1200 - total flux cleaned = 0.00735885 Jy ! Component: 1250 - total flux cleaned = 0.00741551 Jy ! Component: 1300 - total flux cleaned = 0.00741596 Jy ! Component: 1350 - total flux cleaned = 0.00746989 Jy ! Component: 1400 - total flux cleaned = 0.00747039 Jy ! Component: 1450 - total flux cleaned = 0.00762758 Jy ! Component: 1500 - total flux cleaned = 0.00757492 Jy ! Component: 1550 - total flux cleaned = 0.00757481 Jy ! Component: 1600 - total flux cleaned = 0.00767525 Jy ! Component: 1650 - total flux cleaned = 0.00772291 Jy ! Component: 1700 - total flux cleaned = 0.00772291 Jy ! Component: 1750 - total flux cleaned = 0.00772386 Jy ! Component: 1800 - total flux cleaned = 0.00796094 Jy ! Component: 1850 - total flux cleaned = 0.00791372 Jy ! Component: 1900 - total flux cleaned = 0.00795998 Jy ! Component: 1950 - total flux cleaned = 0.00800592 Jy ! Component: 2000 - total flux cleaned = 0.00800621 Jy ! Total flux subtracted in 2048 components = 0.0079618 Jy ! Clean residual min=-0.002321 max=0.002794 Jy/beam ! Clean residual mean=-0.000015 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 2.29365 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 336 components and 2.29365 Jy ![Exited script file: muppet] wmap "J2225-0457_X_2017_02_24_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8457 x 1.988 at -0.1775 degrees (North through East) ! Clean map min=-0.0049053 max=1.2686 Jy/beam ! Writing clean map to FITS file: J2225-0457_X_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.2686 invert ! Inverting map ! Your choice of large map pixels excluded 0.194% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000835068 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.197478 0.197478 0.394956 0.789911 1.57982 3.15965 6.31929 12.6386 25.2772 50.5543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.268 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8457 x 1.988 at -0.1775 degrees (North through East) ! Clean map min=-0.0049053 max=1.2686 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2225-0457_X_2017_02_24_pus_uvs.log closed on Sat May 4 10:07:48 2019