! Started logfile: J2225-0457_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:53 2019 obs J2225-0457_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2225-0457_S_2017_10_09_pus_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.562963 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2225-0457_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.091245Jy sigma=0.008944 ! Fit after self-cal, rms=1.087857Jy sigma=0.008915 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=13.12 mas, bpa=-16.7 degrees ! Estimated noise=2248.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.281 Jy ! Component: 100 - total flux cleaned = 1.73639 Jy ! Total flux subtracted in 100 components = 1.73639 Jy ! Clean residual min=-0.116719 max=0.202186 Jy/beam ! Clean residual mean=0.000262 rms=0.038738 Jy/beam ! Combined flux in latest and established models = 1.73639 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.73639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.658831Jy sigma=0.005268 ! Fit after self-cal, rms=0.658914Jy sigma=0.005267 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=12.79 mas, bpa=-16.6 degrees ! Estimated noise=1900.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270432 Jy ! Component: 100 - total flux cleaned = 0.41624 Jy ! Component: 150 - total flux cleaned = 0.502848 Jy ! Component: 200 - total flux cleaned = 0.560732 Jy ! Total flux subtracted in 200 components = 0.560732 Jy ! Clean residual min=-0.126597 max=0.189509 Jy/beam ! Clean residual mean=0.000210 rms=0.037016 Jy/beam ! Combined flux in latest and established models = 2.29712 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 60 components and 2.29712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538844Jy sigma=0.004119 ! Fit after self-cal, rms=0.538839Jy sigma=0.004118 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.86 HN 1.08 KP 1.12 ! LA 1.01 MK 1.03 NL 0.93 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 0.92 HN 1.13 KP 1.09 ! LA 0.96 MK 1.04 NL 1.07 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.95 HN 1.13 KP 0.95 ! LA 0.75 MK 1.06 NL 1.21 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.08 KP 1.00* ! LA 1.00* MK 1.27 NL 1.00* OV 1.00* ! PT 0.87 ! ! ! Fit before self-cal, rms=0.538839Jy sigma=0.004118 ! Fit after self-cal, rms=0.437593Jy sigma=0.003353 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=13.01 mas, bpa=-16.6 degrees ! Estimated noise=1926.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169788 Jy ! Component: 100 - total flux cleaned = 0.245306 Jy ! Component: 150 - total flux cleaned = 0.255818 Jy ! Component: 200 - total flux cleaned = 0.254155 Jy ! Total flux subtracted in 200 components = 0.254155 Jy ! Clean residual min=-0.084842 max=0.093187 Jy/beam ! Clean residual mean=-0.000190 rms=0.023695 Jy/beam ! Combined flux in latest and established models = 2.55127 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 109 components and 2.55127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370493Jy sigma=0.002668 ! Fit after self-cal, rms=0.360533Jy sigma=0.002571 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360533Jy sigma=0.002571 ! Fit after self-cal, rms=0.211472Jy sigma=0.001721 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=13.22 mas, bpa=-16.65 degrees ! Estimated noise=1930.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054191 Jy ! Component: 100 - total flux cleaned = 0.0668103 Jy ! Component: 150 - total flux cleaned = 0.0744706 Jy ! Component: 200 - total flux cleaned = 0.0809986 Jy ! Total flux subtracted in 200 components = 0.0809986 Jy ! Clean residual min=-0.039917 max=0.056854 Jy/beam ! Clean residual mean=-0.000073 rms=0.012865 Jy/beam ! Combined flux in latest and established models = 2.63227 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 169 components and 2.63227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195373Jy sigma=0.001547 ! Fit after self-cal, rms=0.193319Jy sigma=0.001531 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188898 Jy ! Component: 100 - total flux cleaned = 0.0249224 Jy ! Component: 150 - total flux cleaned = 0.0301263 Jy ! Component: 200 - total flux cleaned = 0.0318746 Jy ! Total flux subtracted in 200 components = 0.0318746 Jy ! Clean residual min=-0.038483 max=0.051455 Jy/beam ! Clean residual mean=-0.000088 rms=0.012030 Jy/beam ! Combined flux in latest and established models = 2.66415 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 193 components and 2.66415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188553Jy sigma=0.001481 ! Fit after self-cal, rms=0.188180Jy sigma=0.001478 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188180Jy sigma=0.001478 ! Fit after self-cal, rms=0.146707Jy sigma=0.001174 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=13.21 mas, bpa=-16.67 degrees ! Estimated noise=1919.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280286 Jy ! Component: 100 - total flux cleaned = 0.0466171 Jy ! Component: 150 - total flux cleaned = 0.0598792 Jy ! Component: 200 - total flux cleaned = 0.0677845 Jy ! Total flux subtracted in 200 components = 0.0677845 Jy ! Clean residual min=-0.027418 max=0.034535 Jy/beam ! Clean residual mean=-0.000064 rms=0.007389 Jy/beam ! Combined flux in latest and established models = 2.73193 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 223 components and 2.73193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140562Jy sigma=0.001108 ! Fit after self-cal, rms=0.139761Jy sigma=0.001103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (122.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327825 Jy ! Component: 100 - total flux cleaned = 0.0500859 Jy ! Component: 150 - total flux cleaned = 0.0612687 Jy ! Component: 200 - total flux cleaned = 0.0686427 Jy ! Total flux subtracted in 200 components = 0.0686427 Jy ! Clean residual min=-0.021921 max=0.019981 Jy/beam ! Clean residual mean=-0.000054 rms=0.005939 Jy/beam ! Combined flux in latest and established models = 2.80057 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 270 components and 2.80057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132135Jy sigma=0.001015 ! Fit after self-cal, rms=0.131406Jy sigma=0.001007 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131406Jy sigma=0.001007 ! Fit after self-cal, rms=0.130273Jy sigma=0.000994 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.303 mas, bmaj=14.22 mas, bpa=-5.502 degrees ! Estimated noise=2284.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204976 Jy ! Component: 100 - total flux cleaned = 0.0347767 Jy ! Component: 150 - total flux cleaned = 0.0457063 Jy ! Component: 200 - total flux cleaned = 0.0535079 Jy ! Total flux subtracted in 200 components = 0.0535079 Jy ! Clean residual min=-0.025578 max=0.021473 Jy/beam ! Clean residual mean=-0.000054 rms=0.006936 Jy/beam ! Combined flux in latest and established models = 2.85408 Jy selfcal ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 321 components and 2.85408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128215Jy sigma=0.000967 ! Fit after self-cal, rms=0.127897Jy sigma=0.000965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00960821 Jy ! Component: 100 - total flux cleaned = 0.0138466 Jy ! Component: 150 - total flux cleaned = 0.0167484 Jy ! Component: 200 - total flux cleaned = 0.0197264 Jy ! Total flux subtracted in 200 components = 0.0197264 Jy ! Clean residual min=-0.024212 max=0.020726 Jy/beam ! Clean residual mean=-0.000055 rms=0.006560 Jy/beam ! Combined flux in latest and established models = 2.87381 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 351 components and 2.87381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127129Jy sigma=0.000957 ! Fit after self-cal, rms=0.127021Jy sigma=0.000956 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=13.23 mas, bpa=-16.66 degrees ! Estimated noise=1915.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 13.23 at -16.66 degrees (North through East) ! Clean map min=-0.021382 max=1.7192 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127021Jy sigma=0.000956 ! Fit after self-cal, rms=0.110264Jy sigma=0.000817 ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=13.24 mas, bpa=-16.67 degrees ! Estimated noise=1917.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423372 Jy ! Component: 100 - total flux cleaned = 0.00877692 Jy ! Component: 150 - total flux cleaned = 0.0124537 Jy ! Component: 200 - total flux cleaned = 0.0142644 Jy ! Total flux subtracted in 200 components = 0.0142644 Jy ! Clean residual min=-0.019192 max=0.017823 Jy/beam ! Clean residual mean=-0.000034 rms=0.004526 Jy/beam ! Combined flux in latest and established models = 2.88807 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 372 components and 2.88807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108715Jy sigma=0.000800 ! Fit after self-cal, rms=0.108591Jy sigma=0.000799 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153202 Jy ! Component: 100 - total flux cleaned = 0.00250067 Jy ! Component: 150 - total flux cleaned = 0.00407556 Jy ! Component: 200 - total flux cleaned = 0.00512815 Jy ! Total flux subtracted in 200 components = 0.00512815 Jy ! Clean residual min=-0.018938 max=0.017101 Jy/beam ! Clean residual mean=-0.000033 rms=0.004407 Jy/beam ! Combined flux in latest and established models = 2.8932 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 385 components and 2.8932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107800Jy sigma=0.000790 ! Fit after self-cal, rms=0.107723Jy sigma=0.000789 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107723Jy sigma=0.000789 ! Fit after self-cal, rms=0.107596Jy sigma=0.000788 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=13.37 mas, bpa=-16.74 degrees ! Estimated noise=2289.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29126 Jy ! Component: 100 - total flux cleaned = 1.73844 Jy ! Component: 150 - total flux cleaned = 1.96252 Jy ! Component: 200 - total flux cleaned = 2.1075 Jy ! Total flux subtracted in 200 components = 2.1075 Jy ! Clean residual min=-0.056016 max=0.080217 Jy/beam ! Clean residual mean=0.000149 rms=0.017007 Jy/beam ! Combined flux in latest and established models = 2.10751 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 2.10751 Jy ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=13.25 mas, bpa=-16.67 degrees ! Estimated noise=1917.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132681 Jy ! Component: 100 - total flux cleaned = 0.228708 Jy ! Component: 150 - total flux cleaned = 0.303307 Jy ! Component: 200 - total flux cleaned = 0.363006 Jy ! Total flux subtracted in 200 components = 0.363006 Jy ! Clean residual min=-0.044376 max=0.041295 Jy/beam ! Clean residual mean=0.000116 rms=0.012719 Jy/beam ! Combined flux in latest and established models = 2.47051 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 122 components and 2.47051 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.294 mas, bmaj=14.24 mas, bpa=-5.574 degrees ! Estimated noise=2285.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0790212 Jy ! Component: 100 - total flux cleaned = 0.139116 Jy ! Component: 150 - total flux cleaned = 0.185889 Jy ! Component: 200 - total flux cleaned = 0.223491 Jy ! Total flux subtracted in 200 components = 0.223491 Jy ! Clean residual min=-0.039721 max=0.032368 Jy/beam ! Clean residual mean=0.000043 rms=0.011475 Jy/beam ! Combined flux in latest and established models = 2.694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031263 Jy ! Component: 100 - total flux cleaned = 0.0579033 Jy ! Component: 150 - total flux cleaned = 0.080964 Jy ! Component: 200 - total flux cleaned = 0.101191 Jy ! Total flux subtracted in 200 components = 0.101191 Jy ! Clean residual min=-0.031868 max=0.023910 Jy/beam ! Clean residual mean=-0.000003 rms=0.008534 Jy/beam ! Combined flux in latest and established models = 2.7952 Jy ! Adding 184 model components to the UV plane model. ! The established model now contains 302 components and 2.7952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=13.25 mas, bpa=-16.67 degrees ! Estimated noise=1917.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193271 Jy ! Component: 100 - total flux cleaned = 0.0300919 Jy ! Component: 150 - total flux cleaned = 0.0400642 Jy ! Component: 200 - total flux cleaned = 0.0490038 Jy ! Total flux subtracted in 200 components = 0.0490038 Jy ! Clean residual min=-0.023520 max=0.018481 Jy/beam ! Clean residual mean=-0.000025 rms=0.005279 Jy/beam ! Combined flux in latest and established models = 2.8442 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 336 components and 2.8442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113702Jy sigma=0.000852 ! Fit after self-cal, rms=0.112876Jy sigma=0.000843 wmodel J2225-0457_S_2017_10_09_pus_map.mod ! Writing 336 model components to file: J2225-0457_S_2017_10_09_pus_map.mod wobs J2225-0457_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2225-0457_S_2017_10_09_pus_uvs.fits wwins J2225-0457_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J2225-0457_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00987533 Jy ! Component: 100 - total flux cleaned = -0.0160246 Jy ! Component: 150 - total flux cleaned = -0.018212 Jy ! Component: 200 - total flux cleaned = -0.0190922 Jy ! Component: 250 - total flux cleaned = -0.0193624 Jy ! Component: 300 - total flux cleaned = -0.0201284 Jy ! Component: 350 - total flux cleaned = -0.0206203 Jy ! Component: 400 - total flux cleaned = -0.021797 Jy ! Component: 450 - total flux cleaned = -0.0224727 Jy ! Component: 500 - total flux cleaned = -0.023342 Jy ! Component: 550 - total flux cleaned = -0.0239709 Jy ! Component: 600 - total flux cleaned = -0.0243758 Jy ! Component: 650 - total flux cleaned = -0.025754 Jy ! Component: 700 - total flux cleaned = -0.0263297 Jy ! Component: 750 - total flux cleaned = -0.0272619 Jy ! Component: 800 - total flux cleaned = -0.0283419 Jy ! Component: 850 - total flux cleaned = -0.0293892 Jy ! Component: 900 - total flux cleaned = -0.0307439 Jy ! Component: 950 - total flux cleaned = -0.03173 Jy ! Component: 1000 - total flux cleaned = -0.0325332 Jy ! Component: 1050 - total flux cleaned = -0.0336262 Jy ! Component: 1100 - total flux cleaned = -0.0345325 Jy ! Component: 1150 - total flux cleaned = -0.0349804 Jy ! Component: 1200 - total flux cleaned = -0.0355615 Jy ! Component: 1250 - total flux cleaned = -0.0362661 Jy ! Component: 1300 - total flux cleaned = -0.0368099 Jy ! Component: 1350 - total flux cleaned = -0.0368106 Jy ! Component: 1400 - total flux cleaned = -0.036811 Jy ! Component: 1450 - total flux cleaned = -0.0370656 Jy ! Component: 1500 - total flux cleaned = -0.0371906 Jy ! Component: 1550 - total flux cleaned = -0.0374365 Jy ! Component: 1600 - total flux cleaned = -0.0371992 Jy ! Component: 1650 - total flux cleaned = -0.0375532 Jy ! Component: 1700 - total flux cleaned = -0.0374385 Jy ! Component: 1750 - total flux cleaned = -0.0376645 Jy ! Component: 1800 - total flux cleaned = -0.0378866 Jy ! Component: 1850 - total flux cleaned = -0.0382132 Jy ! Component: 1900 - total flux cleaned = -0.0386407 Jy ! Component: 1950 - total flux cleaned = -0.0388509 Jy ! Component: 2000 - total flux cleaned = -0.0392618 Jy ! Component: 2050 - total flux cleaned = -0.0392632 Jy ! Component: 2100 - total flux cleaned = -0.0396609 Jy ! Component: 2150 - total flux cleaned = -0.0396613 Jy ! Component: 2200 - total flux cleaned = -0.0398543 Jy ! Component: 2250 - total flux cleaned = -0.0398533 Jy ! Component: 2300 - total flux cleaned = -0.0394803 Jy ! Component: 2350 - total flux cleaned = -0.0395716 Jy ! Component: 2400 - total flux cleaned = -0.0394813 Jy ! Component: 2450 - total flux cleaned = -0.0395705 Jy ! Component: 2500 - total flux cleaned = -0.0392217 Jy ! Component: 2550 - total flux cleaned = -0.0393072 Jy ! Component: 2600 - total flux cleaned = -0.0390511 Jy ! Component: 2650 - total flux cleaned = -0.0392176 Jy ! Component: 2700 - total flux cleaned = -0.0388023 Jy ! Component: 2750 - total flux cleaned = -0.0388846 Jy ! Component: 2800 - total flux cleaned = -0.038883 Jy ! Component: 2850 - total flux cleaned = -0.0385641 Jy ! Component: 2900 - total flux cleaned = -0.0384874 Jy ! Component: 2950 - total flux cleaned = -0.0385643 Jy ! Component: 3000 - total flux cleaned = -0.0381812 Jy ! Component: 3050 - total flux cleaned = -0.0381059 Jy ! Component: 3100 - total flux cleaned = -0.0381039 Jy ! Component: 3150 - total flux cleaned = -0.037737 Jy ! Component: 3200 - total flux cleaned = -0.0377384 Jy ! Component: 3250 - total flux cleaned = -0.0380272 Jy ! Component: 3300 - total flux cleaned = -0.0380277 Jy ! Component: 3350 - total flux cleaned = -0.0380275 Jy ! Component: 3400 - total flux cleaned = -0.0379576 Jy ! Component: 3450 - total flux cleaned = -0.0378892 Jy ! Component: 3500 - total flux cleaned = -0.0379572 Jy ! Component: 3550 - total flux cleaned = -0.0378239 Jy ! Component: 3600 - total flux cleaned = -0.0377579 Jy ! Component: 3650 - total flux cleaned = -0.0375617 Jy ! Component: 3700 - total flux cleaned = -0.0376269 Jy ! Component: 3750 - total flux cleaned = -0.0375627 Jy ! Component: 3800 - total flux cleaned = -0.037564 Jy ! Component: 3850 - total flux cleaned = -0.0375636 Jy ! Component: 3900 - total flux cleaned = -0.0376257 Jy ! Component: 3950 - total flux cleaned = -0.0374405 Jy ! Component: 4000 - total flux cleaned = -0.0374403 Jy ! Component: 4050 - total flux cleaned = -0.0372586 Jy ! Total flux subtracted in 4096 components = -0.037259 Jy ! Clean residual min=-0.003367 max=0.003929 Jy/beam ! Clean residual mean=-0.000006 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 2.80694 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 649 components and 2.80694 Jy ![Exited script file: muppet] wmap "J2225-0457_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 13.25 at -16.67 degrees (North through East) ! Clean map min=-0.011383 max=1.7271 Jy/beam ! Writing clean map to FITS file: J2225-0457_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.72705 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00120063 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.208558 0.208558 0.417115 0.834231 1.66846 3.33692 6.67385 13.3477 26.6954 53.3908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.727 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.414 x 13.25 at -16.67 degrees (North through East) ! Clean map min=-0.011383 max=1.7271 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2225-0457_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:58 2019