! Started logfile: J2224-3831_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:47 2019 obs J2224-3831_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2224-3831_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.567161 visibilities/baseline/integration-bin. ! Found source: J2224-3831 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11924 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2224-3831_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 857 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962130Jy sigma=0.006080 ! Fit after self-cal, rms=0.919867Jy sigma=0.005848 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.417 mas, bmaj=15.69 mas, bpa=-15.11 degrees ! Estimated noise=1990.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611242 Jy ! Component: 100 - total flux cleaned = 0.0814918 Jy ! Total flux subtracted in 100 components = 0.0814918 Jy ! Clean residual min=-0.007693 max=0.013836 Jy/beam ! Clean residual mean=-0.000299 rms=0.002707 Jy/beam ! Combined flux in latest and established models = 0.0814918 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0814918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119549Jy sigma=0.000662 ! Fit after self-cal, rms=0.119096Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=17.17 mas, bpa=-15.22 degrees ! Estimated noise=1209.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165662 Jy ! Component: 100 - total flux cleaned = 0.0257109 Jy ! Component: 150 - total flux cleaned = 0.0310931 Jy ! Component: 200 - total flux cleaned = 0.0342759 Jy ! Total flux subtracted in 200 components = 0.0342759 Jy ! Clean residual min=-0.009469 max=0.011779 Jy/beam ! Clean residual mean=-0.000584 rms=0.003344 Jy/beam ! Combined flux in latest and established models = 0.115768 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 0.115768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116638Jy sigma=0.000645 ! Fit after self-cal, rms=0.116100Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 1.07 HN 1.13 KP 1.23 ! LA 0.90 MK 1.00 NL 0.95 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.99 FD 1.10 HN 1.16 KP 1.05 ! LA 0.89 MK 1.05 NL 1.01 OV 1.00* ! PT 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.09 HN 1.10 KP 0.94 ! LA 0.72 MK 0.97 NL 1.23 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 309 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.76 KP 1.00* ! LA 1.00* MK 0.83 NL 1.00* OV 1.00* ! PT 1.06 ! ! ! Fit before self-cal, rms=0.116100Jy sigma=0.000643 ! Fit after self-cal, rms=0.121861Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=17.67 mas, bpa=-15.58 degrees ! Estimated noise=1259.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.5, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138062 Jy ! Component: 100 - total flux cleaned = 0.0203871 Jy ! Component: 150 - total flux cleaned = 0.0248048 Jy ! Component: 200 - total flux cleaned = 0.0282314 Jy ! Total flux subtracted in 200 components = 0.0282314 Jy ! Clean residual min=-0.004544 max=0.003768 Jy/beam ! Clean residual mean=-0.000181 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.143999 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 99 components and 0.143999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120540Jy sigma=0.000625 ! Fit after self-cal, rms=0.120308Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120308Jy sigma=0.000622 ! Fit after self-cal, rms=0.122104Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=17.84 mas, bpa=-15.7 degrees ! Estimated noise=1231.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550319 Jy ! Component: 100 - total flux cleaned = 0.00856248 Jy ! Component: 150 - total flux cleaned = 0.010613 Jy ! Component: 200 - total flux cleaned = 0.0116086 Jy ! Total flux subtracted in 200 components = 0.0116086 Jy ! Clean residual min=-0.004157 max=0.003439 Jy/beam ! Clean residual mean=-0.000040 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.155608 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 140 components and 0.155608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121879Jy sigma=0.000618 ! Fit after self-cal, rms=0.121856Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200631 Jy ! Component: 100 - total flux cleaned = 0.00295447 Jy ! Component: 150 - total flux cleaned = 0.00369468 Jy ! Component: 200 - total flux cleaned = 0.00431673 Jy ! Total flux subtracted in 200 components = 0.00431673 Jy ! Clean residual min=-0.004340 max=0.003545 Jy/beam ! Clean residual mean=-0.000014 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.159924 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 163 components and 0.159924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121812Jy sigma=0.000617 ! Fit after self-cal, rms=0.121766Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121766Jy sigma=0.000617 ! Fit after self-cal, rms=0.122262Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=17.87 mas, bpa=-15.69 degrees ! Estimated noise=1226.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000965402 Jy ! Component: 100 - total flux cleaned = 0.00160607 Jy ! Component: 150 - total flux cleaned = 0.00191229 Jy ! Component: 200 - total flux cleaned = 0.00208884 Jy ! Total flux subtracted in 200 components = 0.00208884 Jy ! Clean residual min=-0.004104 max=0.003738 Jy/beam ! Clean residual mean=0.000005 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.162013 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 177 components and 0.162013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122237Jy sigma=0.000616 ! Fit after self-cal, rms=0.122232Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208134 Jy ! Component: 100 - total flux cleaned = 0.000400206 Jy ! Component: 150 - total flux cleaned = 0.00054335 Jy ! Component: 200 - total flux cleaned = 0.000649129 Jy ! Total flux subtracted in 200 components = 0.000649129 Jy ! Clean residual min=-0.004088 max=0.003769 Jy/beam ! Clean residual mean=0.000010 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.162662 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 189 components and 0.162662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122218Jy sigma=0.000616 ! Fit after self-cal, rms=0.122212Jy sigma=0.000616 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122212Jy sigma=0.000616 ! Fit after self-cal, rms=0.122771Jy sigma=0.000616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.796 mas, bmaj=36.62 mas, bpa=-0.6756 degrees ! Estimated noise=1575.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867076 Jy ! Component: 100 - total flux cleaned = 0.000966722 Jy ! Component: 150 - total flux cleaned = 0.000992409 Jy ! Component: 200 - total flux cleaned = 0.00101294 Jy ! Total flux subtracted in 200 components = 0.00101294 Jy ! Clean residual min=-0.004779 max=0.004194 Jy/beam ! Clean residual mean=0.000014 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.163675 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 215 components and 0.163675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122761Jy sigma=0.000616 ! Fit after self-cal, rms=0.122751Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131842 Jy ! Component: 100 - total flux cleaned = 0.000202029 Jy ! Component: 150 - total flux cleaned = 0.000245549 Jy ! Component: 200 - total flux cleaned = 0.000306631 Jy ! Total flux subtracted in 200 components = 0.000306631 Jy ! Clean residual min=-0.004910 max=0.004229 Jy/beam ! Clean residual mean=0.000020 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.163982 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 227 components and 0.163982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122745Jy sigma=0.000616 ! Fit after self-cal, rms=0.122743Jy sigma=0.000616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=17.89 mas, bpa=-15.68 degrees ! Estimated noise=1226.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 17.89 at -15.68 degrees (North through East) ! Clean map min=-0.0039258 max=0.075269 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=16.09 mas, bpa=-15.46 degrees ! Estimated noise=1844.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589784 Jy ! Component: 100 - total flux cleaned = 0.0800635 Jy ! Component: 150 - total flux cleaned = 0.0936489 Jy ! Component: 200 - total flux cleaned = 0.103885 Jy ! Total flux subtracted in 200 components = 0.103885 Jy ! Clean residual min=-0.007325 max=0.007043 Jy/beam ! Clean residual mean=-0.000158 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.103885 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.103885 Jy ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=17.89 mas, bpa=-15.68 degrees ! Estimated noise=1226.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116468 Jy ! Component: 100 - total flux cleaned = 0.0202418 Jy ! Component: 150 - total flux cleaned = 0.027114 Jy ! Component: 200 - total flux cleaned = 0.0327101 Jy ! Total flux subtracted in 200 components = 0.0327101 Jy ! Clean residual min=-0.005620 max=0.004757 Jy/beam ! Clean residual mean=-0.000161 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.136595 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 92 components and 0.136595 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.796 mas, bmaj=36.62 mas, bpa=-0.6756 degrees ! Estimated noise=1575.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072629 Jy ! Component: 100 - total flux cleaned = 0.0124859 Jy ! Component: 150 - total flux cleaned = 0.0163293 Jy ! Component: 200 - total flux cleaned = 0.0191963 Jy ! Total flux subtracted in 200 components = 0.0191963 Jy ! Clean residual min=-0.005840 max=0.003932 Jy/beam ! Clean residual mean=-0.000080 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.155791 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214962 Jy ! Component: 100 - total flux cleaned = 0.00376943 Jy ! Component: 150 - total flux cleaned = 0.00499621 Jy ! Component: 200 - total flux cleaned = 0.00592879 Jy ! Total flux subtracted in 200 components = 0.00592879 Jy ! Clean residual min=-0.005251 max=0.004137 Jy/beam ! Clean residual mean=-0.000008 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.16172 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 161 components and 0.16172 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=17.89 mas, bpa=-15.68 degrees ! Estimated noise=1226.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068253 Jy ! Component: 100 - total flux cleaned = 0.000807017 Jy ! Component: 150 - total flux cleaned = 0.000967237 Jy ! Component: 200 - total flux cleaned = 0.00106009 Jy ! Total flux subtracted in 200 components = 0.00106009 Jy ! Clean residual min=-0.004069 max=0.004028 Jy/beam ! Clean residual mean=0.000001 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.16278 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 188 components and 0.16278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122790Jy sigma=0.000616 ! Fit after self-cal, rms=0.122760Jy sigma=0.000616 wmodel J2224-3831_S_2017_10_09_pus_map.mod ! Writing 188 model components to file: J2224-3831_S_2017_10_09_pus_map.mod wobs J2224-3831_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2224-3831_S_2017_10_09_pus_uvs.fits wwins J2224-3831_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2224-3831_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000474442 Jy ! Component: 100 - total flux cleaned = -0.000967497 Jy ! Component: 150 - total flux cleaned = -0.000803351 Jy ! Component: 200 - total flux cleaned = -0.000803229 Jy ! Component: 250 - total flux cleaned = -0.000944156 Jy ! Component: 300 - total flux cleaned = -0.00103252 Jy ! Component: 350 - total flux cleaned = -0.00115758 Jy ! Component: 400 - total flux cleaned = -0.00123576 Jy ! Component: 450 - total flux cleaned = -0.00146311 Jy ! Component: 500 - total flux cleaned = -0.00153666 Jy ! Component: 550 - total flux cleaned = -0.00160704 Jy ! Component: 600 - total flux cleaned = -0.0016404 Jy ! Component: 650 - total flux cleaned = -0.00167408 Jy ! Component: 700 - total flux cleaned = -0.00170729 Jy ! Component: 750 - total flux cleaned = -0.00170819 Jy ! Component: 800 - total flux cleaned = -0.00173766 Jy ! Component: 850 - total flux cleaned = -0.00170789 Jy ! Component: 900 - total flux cleaned = -0.00167943 Jy ! Component: 950 - total flux cleaned = -0.00162517 Jy ! Component: 1000 - total flux cleaned = -0.00154612 Jy ! Component: 1050 - total flux cleaned = -0.00146967 Jy ! Component: 1100 - total flux cleaned = -0.00136965 Jy ! Component: 1150 - total flux cleaned = -0.0012728 Jy ! Component: 1200 - total flux cleaned = -0.00115457 Jy ! Component: 1250 - total flux cleaned = -0.00110865 Jy ! Component: 1300 - total flux cleaned = -0.000996207 Jy ! Component: 1350 - total flux cleaned = -0.000952762 Jy ! Component: 1400 - total flux cleaned = -0.000866877 Jy ! Component: 1450 - total flux cleaned = -0.000804404 Jy ! Component: 1500 - total flux cleaned = -0.000763144 Jy ! Component: 1550 - total flux cleaned = -0.000663658 Jy ! Component: 1600 - total flux cleaned = -0.00066374 Jy ! Component: 1650 - total flux cleaned = -0.000587495 Jy ! Component: 1700 - total flux cleaned = -0.000494438 Jy ! Component: 1750 - total flux cleaned = -0.000476279 Jy ! Component: 1800 - total flux cleaned = -0.000314136 Jy ! Component: 1850 - total flux cleaned = -0.000207834 Jy ! Component: 1900 - total flux cleaned = -8.54872e-05 Jy ! Component: 1950 - total flux cleaned = 5.24255e-05 Jy ! Component: 2000 - total flux cleaned = 0.000188185 Jy ! Component: 2050 - total flux cleaned = 0.000255214 Jy ! Component: 2100 - total flux cleaned = 0.00038745 Jy ! Component: 2150 - total flux cleaned = 0.000468862 Jy ! Component: 2200 - total flux cleaned = 0.000533207 Jy ! Component: 2250 - total flux cleaned = 0.000596826 Jy ! Component: 2300 - total flux cleaned = 0.000643994 Jy ! Component: 2350 - total flux cleaned = 0.000675217 Jy ! Component: 2400 - total flux cleaned = 0.00072151 Jy ! Component: 2450 - total flux cleaned = 0.00078253 Jy ! Component: 2500 - total flux cleaned = 0.000797641 Jy ! Component: 2550 - total flux cleaned = 0.00081258 Jy ! Component: 2600 - total flux cleaned = 0.000812579 Jy ! Component: 2650 - total flux cleaned = 0.000812621 Jy ! Component: 2700 - total flux cleaned = 0.000798286 Jy ! Component: 2750 - total flux cleaned = 0.00079836 Jy ! Component: 2800 - total flux cleaned = 0.000812564 Jy ! Component: 2850 - total flux cleaned = 0.00079846 Jy ! Component: 2900 - total flux cleaned = 0.000812554 Jy ! Component: 2950 - total flux cleaned = 0.000812528 Jy ! Component: 3000 - total flux cleaned = 0.0007849 Jy ! Component: 3050 - total flux cleaned = 0.000784857 Jy ! Component: 3100 - total flux cleaned = 0.000771098 Jy ! Component: 3150 - total flux cleaned = 0.000757601 Jy ! Component: 3200 - total flux cleaned = 0.000730836 Jy ! Component: 3250 - total flux cleaned = 0.000770868 Jy ! Component: 3300 - total flux cleaned = 0.000757634 Jy ! Component: 3350 - total flux cleaned = 0.000770836 Jy ! Component: 3400 - total flux cleaned = 0.000770834 Jy ! Component: 3450 - total flux cleaned = 0.000770831 Jy ! Component: 3500 - total flux cleaned = 0.000796664 Jy ! Component: 3550 - total flux cleaned = 0.000745058 Jy ! Component: 3600 - total flux cleaned = 0.000757833 Jy ! Component: 3650 - total flux cleaned = 0.000732327 Jy ! Component: 3700 - total flux cleaned = 0.000706996 Jy ! Component: 3750 - total flux cleaned = 0.000681756 Jy ! Component: 3800 - total flux cleaned = 0.000644009 Jy ! Component: 3850 - total flux cleaned = 0.000631452 Jy ! Component: 3900 - total flux cleaned = 0.000606546 Jy ! Component: 3950 - total flux cleaned = 0.000606522 Jy ! Component: 4000 - total flux cleaned = 0.000581811 Jy ! Component: 4050 - total flux cleaned = 0.000544919 Jy ! Total flux subtracted in 4096 components = 0.000508116 Jy ! Clean residual min=-0.000729 max=0.000691 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.163288 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 510 components and 0.163288 Jy ![Exited script file: muppet] wmap "J2224-3831_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 17.89 at -15.68 degrees (North through East) ! Clean map min=-0.0020293 max=0.076777 Jy/beam ! Writing clean map to FITS file: J2224-3831_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0767771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.849137 0.849137 1.69827 3.39655 6.79309 13.5862 27.1724 54.3447 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 17.89 at -15.68 degrees (North through East) ! Clean map min=-0.0020293 max=0.076777 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2224-3831_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:52 2019