! Started logfile: J2224-3831_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:50:20 2019 obs J2224-3831_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2224-3831_S_2017_03_27_pus_uva.fits ! AN table 1: 98 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.481179 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2224-3831 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 8488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2224-3831_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 503 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 378 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 760 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969571Jy sigma=0.005819 ! Fit after self-cal, rms=0.923429Jy sigma=0.005569 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=8.087 mas, bpa=3.899 degrees ! Estimated noise=2834.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0642766 Jy ! Component: 100 - total flux cleaned = 0.0784353 Jy ! Total flux subtracted in 100 components = 0.0784353 Jy ! Clean residual min=-0.010052 max=0.008966 Jy/beam ! Clean residual mean=0.000128 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.0784353 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0784353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129096Jy sigma=0.000677 ! Fit after self-cal, rms=0.128402Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=8.504 mas, bpa=2.372 degrees ! Estimated noise=1624.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558869 Jy ! Component: 100 - total flux cleaned = 0.0076105 Jy ! Component: 150 - total flux cleaned = 0.00828899 Jy ! Component: 200 - total flux cleaned = 0.00828975 Jy ! Total flux subtracted in 200 components = 0.00828975 Jy ! Clean residual min=-0.006799 max=0.008044 Jy/beam ! Clean residual mean=0.000162 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.0867251 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.0867251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128080Jy sigma=0.000674 ! Fit after self-cal, rms=0.128099Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 1.00* KP 1.04 ! LA 0.99 MK 0.95 NL 1.00* OV 0.96 ! PT 1.90 SC 0.96 ! ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.84 HN 1.00* KP 0.97 ! LA 0.97 MK 0.97 NL 1.13 OV 1.03 ! PT 1.42 SC 1.03 ! ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 HN 1.00* KP 0.95 ! LA 0.89 MK 1.08 NL 0.83 OV 0.90 ! PT 1.19 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.81 HN 1.00* KP 1.00* ! LA 1.00* MK 1.05 NL 1.00* OV 0.82 ! PT 1.30 SC 0.78 ! ! ! Fit before self-cal, rms=0.128099Jy sigma=0.000674 ! Fit after self-cal, rms=0.124101Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.372 mas, bpa=2.307 degrees ! Estimated noise=1653.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356171 Jy ! Component: 100 - total flux cleaned = 0.000356236 Jy ! Component: 150 - total flux cleaned = 0.000333799 Jy ! Component: 200 - total flux cleaned = 0.000333745 Jy ! Total flux subtracted in 200 components = 0.000333745 Jy ! Clean residual min=-0.005901 max=0.006578 Jy/beam ! Clean residual mean=0.000110 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.0870588 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0870588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124089Jy sigma=0.000670 ! Fit after self-cal, rms=0.124741Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124741Jy sigma=0.000668 ! Fit after self-cal, rms=0.132525Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=8.363 mas, bpa=2.05 degrees ! Estimated noise=1685.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146758 Jy ! Component: 100 - total flux cleaned = 0.00157463 Jy ! Component: 150 - total flux cleaned = 0.00166045 Jy ! Component: 200 - total flux cleaned = 0.00170939 Jy ! Total flux subtracted in 200 components = 0.00170939 Jy ! Clean residual min=-0.005570 max=0.005924 Jy/beam ! Clean residual mean=0.000075 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.0887682 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.0887682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132500Jy sigma=0.000665 ! Fit after self-cal, rms=0.133071Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418377 Jy ! Component: 100 - total flux cleaned = 0.000439198 Jy ! Component: 150 - total flux cleaned = 0.000418968 Jy ! Component: 200 - total flux cleaned = 0.0004004 Jy ! Total flux subtracted in 200 components = 0.0004004 Jy ! Clean residual min=-0.005494 max=0.006331 Jy/beam ! Clean residual mean=0.000089 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.0891686 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.0891686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133064Jy sigma=0.000664 ! Fit after self-cal, rms=0.133081Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133081Jy sigma=0.000664 ! Fit after self-cal, rms=0.139535Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=8.375 mas, bpa=1.885 degrees ! Estimated noise=1689.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.40075e-06 Jy ! Component: 100 - total flux cleaned = 3.76375e-06 Jy ! Component: 150 - total flux cleaned = 2.72432e-06 Jy ! Component: 200 - total flux cleaned = -1.65209e-05 Jy ! Total flux subtracted in 200 components = -1.65209e-05 Jy ! Clean residual min=-0.005134 max=0.006445 Jy/beam ! Clean residual mean=0.000051 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.0891521 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0891521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139528Jy sigma=0.000662 ! Fit after self-cal, rms=0.140143Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35, 127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528659 Jy ! Component: 100 - total flux cleaned = 0.00553506 Jy ! Component: 150 - total flux cleaned = 0.00591145 Jy ! Component: 200 - total flux cleaned = 0.00613107 Jy ! Total flux subtracted in 200 components = 0.00613107 Jy ! Clean residual min=-0.004766 max=0.005075 Jy/beam ! Clean residual mean=0.000050 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.0952832 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.0952832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139919Jy sigma=0.000661 ! Fit after self-cal, rms=0.139859Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139859Jy sigma=0.000660 ! Fit after self-cal, rms=0.142989Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.108 mas, bmaj=28.87 mas, bpa=5.275 degrees ! Estimated noise=2192.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033255 Jy ! Component: 100 - total flux cleaned = 0.00365742 Jy ! Component: 150 - total flux cleaned = 0.00359827 Jy ! Component: 200 - total flux cleaned = 0.00354352 Jy ! Total flux subtracted in 200 components = 0.00354352 Jy ! Clean residual min=-0.005880 max=0.007281 Jy/beam ! Clean residual mean=0.000104 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.0988267 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 84 components and 0.0988267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142911Jy sigma=0.000660 ! Fit after self-cal, rms=0.143162Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172845 Jy ! Component: 100 - total flux cleaned = 0.00179035 Jy ! Component: 150 - total flux cleaned = 0.00186772 Jy ! Component: 200 - total flux cleaned = 0.00191717 Jy ! Total flux subtracted in 200 components = 0.00191717 Jy ! Clean residual min=-0.006144 max=0.007413 Jy/beam ! Clean residual mean=0.000109 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.100744 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 0.100744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143138Jy sigma=0.000659 ! Fit after self-cal, rms=0.143138Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.377 mas, bpa=1.801 degrees ! Estimated noise=1683.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 8.377 at 1.801 degrees (North through East) ! Clean map min=-0.0048852 max=0.085204 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=7.984 mas, bpa=3.56 degrees ! Estimated noise=2970.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657354 Jy ! Component: 100 - total flux cleaned = 0.0832009 Jy ! Component: 150 - total flux cleaned = 0.0926533 Jy ! Component: 200 - total flux cleaned = 0.0955199 Jy ! Total flux subtracted in 200 components = 0.0955199 Jy ! Clean residual min=-0.007014 max=0.005899 Jy/beam ! Clean residual mean=0.000020 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.0955198 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0955198 Jy ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.377 mas, bpa=1.801 degrees ! Estimated noise=1683.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314501 Jy ! Component: 100 - total flux cleaned = 0.00415457 Jy ! Component: 150 - total flux cleaned = 0.00455802 Jy ! Component: 200 - total flux cleaned = 0.00479472 Jy ! Total flux subtracted in 200 components = 0.00479472 Jy ! Clean residual min=-0.005440 max=0.005198 Jy/beam ! Clean residual mean=0.000054 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.100315 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.100315 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.108 mas, bmaj=28.87 mas, bpa=5.275 degrees ! Estimated noise=2192.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116059 Jy ! Component: 100 - total flux cleaned = 0.00135618 Jy ! Component: 150 - total flux cleaned = 0.00148292 Jy ! Component: 200 - total flux cleaned = 0.00155449 Jy ! Total flux subtracted in 200 components = 0.00155449 Jy ! Clean residual min=-0.006442 max=0.007469 Jy/beam ! Clean residual mean=0.000107 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.101869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78967e-06 Jy ! Component: 100 - total flux cleaned = 1.45307e-06 Jy ! Component: 150 - total flux cleaned = 4.6154e-06 Jy ! Component: 200 - total flux cleaned = 8.18236e-06 Jy ! Total flux subtracted in 200 components = 8.18236e-06 Jy ! Clean residual min=-0.006266 max=0.007507 Jy/beam ! Clean residual mean=0.000110 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.101877 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.101877 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.377 mas, bpa=1.801 degrees ! Estimated noise=1683.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000565696 Jy ! Component: 100 - total flux cleaned = -0.000611563 Jy ! Component: 150 - total flux cleaned = -0.000611402 Jy ! Component: 200 - total flux cleaned = -0.000576058 Jy ! Total flux subtracted in 200 components = -0.000576058 Jy ! Clean residual min=-0.005057 max=0.005369 Jy/beam ! Clean residual mean=0.000057 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.101301 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.101301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143101Jy sigma=0.000659 ! Fit after self-cal, rms=0.143150Jy sigma=0.000659 wmodel J2224-3831_S_2017_03_27_pus_map.mod ! Writing 55 model components to file: J2224-3831_S_2017_03_27_pus_map.mod wobs J2224-3831_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2224-3831_S_2017_03_27_pus_uvs.fits wwins J2224-3831_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J2224-3831_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757547 Jy ! Component: 100 - total flux cleaned = 0.0017394 Jy ! Component: 150 - total flux cleaned = 0.0022555 Jy ! Component: 200 - total flux cleaned = 0.00266669 Jy ! Component: 250 - total flux cleaned = 0.00318223 Jy ! Component: 300 - total flux cleaned = 0.00336491 Jy ! Component: 350 - total flux cleaned = 0.00366088 Jy ! Component: 400 - total flux cleaned = 0.00394522 Jy ! Component: 450 - total flux cleaned = 0.00427228 Jy ! Component: 500 - total flux cleaned = 0.00453547 Jy ! Component: 550 - total flux cleaned = 0.00478947 Jy ! Component: 600 - total flux cleaned = 0.00503475 Jy ! Component: 650 - total flux cleaned = 0.00522546 Jy ! Component: 700 - total flux cleaned = 0.00555079 Jy ! Component: 750 - total flux cleaned = 0.00582151 Jy ! Component: 800 - total flux cleaned = 0.00613101 Jy ! Component: 850 - total flux cleaned = 0.0063891 Jy ! Component: 900 - total flux cleaned = 0.00660008 Jy ! Component: 950 - total flux cleaned = 0.00697024 Jy ! Component: 1000 - total flux cleaned = 0.00721026 Jy ! Component: 1050 - total flux cleaned = 0.00736721 Jy ! Component: 1100 - total flux cleaned = 0.00759916 Jy ! Component: 1150 - total flux cleaned = 0.00778849 Jy ! Component: 1200 - total flux cleaned = 0.0079003 Jy ! Component: 1250 - total flux cleaned = 0.00811867 Jy ! Component: 1300 - total flux cleaned = 0.00826166 Jy ! Component: 1350 - total flux cleaned = 0.00840158 Jy ! Component: 1400 - total flux cleaned = 0.00850428 Jy ! Component: 1450 - total flux cleaned = 0.00863882 Jy ! Component: 1500 - total flux cleaned = 0.00877074 Jy ! Component: 1550 - total flux cleaned = 0.008836 Jy ! Component: 1600 - total flux cleaned = 0.00893237 Jy ! Component: 1650 - total flux cleaned = 0.00909026 Jy ! Component: 1700 - total flux cleaned = 0.00912126 Jy ! Component: 1750 - total flux cleaned = 0.00915189 Jy ! Component: 1800 - total flux cleaned = 0.00915203 Jy ! Component: 1850 - total flux cleaned = 0.00924138 Jy ! Component: 1900 - total flux cleaned = 0.00924163 Jy ! Component: 1950 - total flux cleaned = 0.00927073 Jy ! Component: 2000 - total flux cleaned = 0.00935685 Jy ! Component: 2050 - total flux cleaned = 0.00938493 Jy ! Component: 2100 - total flux cleaned = 0.00944065 Jy ! Component: 2150 - total flux cleaned = 0.00946777 Jy ! Component: 2200 - total flux cleaned = 0.00946796 Jy ! Component: 2250 - total flux cleaned = 0.00946795 Jy ! Component: 2300 - total flux cleaned = 0.00946793 Jy ! Component: 2350 - total flux cleaned = 0.00941477 Jy ! Component: 2400 - total flux cleaned = 0.00938885 Jy ! Component: 2450 - total flux cleaned = 0.00933705 Jy ! Component: 2500 - total flux cleaned = 0.00944034 Jy ! Component: 2550 - total flux cleaned = 0.00938885 Jy ! Component: 2600 - total flux cleaned = 0.00933812 Jy ! Component: 2650 - total flux cleaned = 0.00928793 Jy ! Component: 2700 - total flux cleaned = 0.00926291 Jy ! Component: 2750 - total flux cleaned = 0.0092134 Jy ! Component: 2800 - total flux cleaned = 0.00923794 Jy ! Component: 2850 - total flux cleaned = 0.00921321 Jy ! Component: 2900 - total flux cleaned = 0.00906683 Jy ! Component: 2950 - total flux cleaned = 0.0089697 Jy ! Component: 3000 - total flux cleaned = 0.0089696 Jy ! Component: 3050 - total flux cleaned = 0.00887336 Jy ! Component: 3100 - total flux cleaned = 0.00882556 Jy ! Component: 3150 - total flux cleaned = 0.00877784 Jy ! Component: 3200 - total flux cleaned = 0.00875399 Jy ! Component: 3250 - total flux cleaned = 0.00868312 Jy ! Component: 3300 - total flux cleaned = 0.00873015 Jy ! Component: 3350 - total flux cleaned = 0.00870655 Jy ! Component: 3400 - total flux cleaned = 0.0086596 Jy ! Component: 3450 - total flux cleaned = 0.0086594 Jy ! Component: 3500 - total flux cleaned = 0.00861268 Jy ! Component: 3550 - total flux cleaned = 0.00863578 Jy ! Component: 3600 - total flux cleaned = 0.00865909 Jy ! Component: 3650 - total flux cleaned = 0.00868224 Jy ! Component: 3700 - total flux cleaned = 0.0087055 Jy ! Component: 3750 - total flux cleaned = 0.00877456 Jy ! Component: 3800 - total flux cleaned = 0.00884347 Jy ! Component: 3850 - total flux cleaned = 0.00888933 Jy ! Component: 3900 - total flux cleaned = 0.00895796 Jy ! Component: 3950 - total flux cleaned = 0.00902665 Jy ! Component: 4000 - total flux cleaned = 0.00902655 Jy ! Component: 4050 - total flux cleaned = 0.00909513 Jy ! Total flux subtracted in 4096 components = 0.00911787 Jy ! Clean residual min=-0.001187 max=0.001280 Jy/beam ! Clean residual mean=0.000018 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.110419 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 319 components and 0.110419 Jy ![Exited script file: muppet] wmap "J2224-3831_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 8.377 at 1.801 degrees (North through East) ! Clean map min=-0.0041927 max=0.084179 Jy/beam ! Writing clean map to FITS file: J2224-3831_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0841789 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000402631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.43491 1.43491 2.86983 5.73966 11.4793 22.9586 45.9172 91.8345 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 8.377 at 1.801 degrees (North through East) ! Clean map min=-0.0041927 max=0.084179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2224-3831_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:50:26 2019