! Started logfile: J2224-1126_S_2017_02_19_pus_uvs.log on Sat May 4 18:59:54 2019 obs J2224-1126_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2224-1126_S_2017_02_19_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.713492 visibilities/baseline/integration-bin. ! Found source: J2224-1126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 14384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2224-1126_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 524 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017206Jy sigma=0.005093 ! Fit after self-cal, rms=0.909709Jy sigma=0.004567 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.366 mas, bpa=-4.269 degrees ! Estimated noise=1852.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754431 Jy ! Component: 100 - total flux cleaned = 0.0945693 Jy ! Total flux subtracted in 100 components = 0.0945693 Jy ! Clean residual min=-0.007367 max=0.009300 Jy/beam ! Clean residual mean=-0.000013 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.0945693 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0945693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155834Jy sigma=0.000720 ! Fit after self-cal, rms=0.154724Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.085 mas, bpa=-4.124 degrees ! Estimated noise=1305.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144861 Jy ! Component: 100 - total flux cleaned = 0.0225737 Jy ! Component: 150 - total flux cleaned = 0.027721 Jy ! Component: 200 - total flux cleaned = 0.0310824 Jy ! Total flux subtracted in 200 components = 0.0310824 Jy ! Clean residual min=-0.005858 max=0.007541 Jy/beam ! Clean residual mean=-0.000015 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.125652 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 44 components and 0.125652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153230Jy sigma=0.000707 ! Fit after self-cal, rms=0.152967Jy sigma=0.000706 ! Inverting map ! Added new window around map position (-4, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746894 Jy ! Component: 100 - total flux cleaned = 0.0106005 Jy ! Component: 150 - total flux cleaned = 0.0125821 Jy ! Component: 200 - total flux cleaned = 0.0136038 Jy ! Total flux subtracted in 200 components = 0.0136038 Jy ! Clean residual min=-0.005356 max=0.005657 Jy/beam ! Clean residual mean=-0.000013 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.139256 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.139256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152619Jy sigma=0.000704 ! Fit after self-cal, rms=0.152383Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.06 KP 1.03 ! LA 0.99 MK 0.98 NL 0.87 OV 1.24 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.17 KP 1.01 ! LA 0.92 MK 0.97 NL 1.05 OV 1.21 ! PT 1.00* SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.96 HN 1.08 KP 0.89 ! LA 0.77 MK 1.00 NL 1.17 OV 1.10 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.87 KP 1.00* ! LA 0.80 MK 1.09 NL 1.00* OV 0.96 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.152383Jy sigma=0.000703 ! Fit after self-cal, rms=0.146991Jy sigma=0.000699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.11 mas, bpa=-4.016 degrees ! Estimated noise=1292.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248448 Jy ! Component: 100 - total flux cleaned = 0.00250015 Jy ! Component: 150 - total flux cleaned = 0.00238376 Jy ! Component: 200 - total flux cleaned = 0.00218137 Jy ! Total flux subtracted in 200 components = 0.00218137 Jy ! Clean residual min=-0.005224 max=0.004822 Jy/beam ! Clean residual mean=-0.000009 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.141437 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.141437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146922Jy sigma=0.000699 ! Fit after self-cal, rms=0.146823Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146823Jy sigma=0.000697 ! Fit after self-cal, rms=0.149817Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.091 mas, bpa=-3.849 degrees ! Estimated noise=1301.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203674 Jy ! Component: 100 - total flux cleaned = 0.00209443 Jy ! Component: 150 - total flux cleaned = 0.00226696 Jy ! Component: 200 - total flux cleaned = 0.00222903 Jy ! Total flux subtracted in 200 components = 0.00222903 Jy ! Clean residual min=-0.003272 max=0.003557 Jy/beam ! Clean residual mean=-0.000007 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.143666 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.143666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149778Jy sigma=0.000693 ! Fit after self-cal, rms=0.149835Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633932 Jy ! Component: 100 - total flux cleaned = 0.000514532 Jy ! Component: 150 - total flux cleaned = 0.000406353 Jy ! Component: 200 - total flux cleaned = 0.000306381 Jy ! Total flux subtracted in 200 components = 0.000306381 Jy ! Clean residual min=-0.003244 max=0.003632 Jy/beam ! Clean residual mean=-0.000006 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.143972 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.143972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149815Jy sigma=0.000693 ! Fit after self-cal, rms=0.149810Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149810Jy sigma=0.000693 ! Fit after self-cal, rms=0.149726Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.054 mas, bpa=-3.879 degrees ! Estimated noise=1291.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040574 Jy ! Component: 100 - total flux cleaned = 0.000441187 Jy ! Component: 150 - total flux cleaned = 0.000352689 Jy ! Component: 200 - total flux cleaned = 0.00024594 Jy ! Total flux subtracted in 200 components = 0.00024594 Jy ! Clean residual min=-0.003161 max=0.003462 Jy/beam ! Clean residual mean=-0.000006 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.144218 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.144218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149715Jy sigma=0.000692 ! Fit after self-cal, rms=0.149811Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112744 Jy ! Component: 100 - total flux cleaned = 4.96613e-05 Jy ! Component: 150 - total flux cleaned = -7.10563e-06 Jy ! Component: 200 - total flux cleaned = -5.78957e-05 Jy ! Total flux subtracted in 200 components = -5.78957e-05 Jy ! Clean residual min=-0.003035 max=0.003469 Jy/beam ! Clean residual mean=-0.000006 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.14416 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 118 components and 0.14416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149803Jy sigma=0.000692 ! Fit after self-cal, rms=0.149814Jy sigma=0.000692 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149814Jy sigma=0.000692 ! Fit after self-cal, rms=0.150111Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.74 mas, bmaj=12.01 mas, bpa=3.538 degrees ! Estimated noise=1796.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362529 Jy ! Component: 100 - total flux cleaned = -0.000467789 Jy ! Component: 150 - total flux cleaned = -0.000520349 Jy ! Component: 200 - total flux cleaned = -0.000553172 Jy ! Total flux subtracted in 200 components = -0.000553172 Jy ! Clean residual min=-0.004092 max=0.005273 Jy/beam ! Clean residual mean=-0.000016 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.143607 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 136 components and 0.143607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150108Jy sigma=0.000692 ! Fit after self-cal, rms=0.150153Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-115, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373945 Jy ! Component: 100 - total flux cleaned = 0.00484194 Jy ! Component: 150 - total flux cleaned = 0.0058592 Jy ! Component: 200 - total flux cleaned = 0.00664901 Jy ! Total flux subtracted in 200 components = 0.00664901 Jy ! Clean residual min=-0.003223 max=0.003535 Jy/beam ! Clean residual mean=-0.000014 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.150256 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 183 components and 0.150256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150050Jy sigma=0.000691 ! Fit after self-cal, rms=0.150040Jy sigma=0.000691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.041 mas, bpa=-3.836 degrees ! Estimated noise=1288.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.826 x 7.041 at -3.836 degrees (North through East) ! Clean map min=-0.0030722 max=0.09951 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=6.339 mas, bpa=-4.007 degrees ! Estimated noise=1805.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073466 Jy ! Component: 100 - total flux cleaned = 0.0951987 Jy ! Component: 150 - total flux cleaned = 0.108646 Jy ! Component: 200 - total flux cleaned = 0.117774 Jy ! Total flux subtracted in 200 components = 0.117774 Jy ! Clean residual min=-0.006135 max=0.005324 Jy/beam ! Clean residual mean=-0.000011 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.117774 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.117774 Jy ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.041 mas, bpa=-3.836 degrees ! Estimated noise=1288.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00896899 Jy ! Component: 100 - total flux cleaned = 0.0141082 Jy ! Component: 150 - total flux cleaned = 0.0176029 Jy ! Component: 200 - total flux cleaned = 0.0206161 Jy ! Total flux subtracted in 200 components = 0.0206161 Jy ! Clean residual min=-0.003590 max=0.003807 Jy/beam ! Clean residual mean=-0.000009 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.138391 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 55 components and 0.138391 Jy ! Inverting map ! Added new window around map position (8, -121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330239 Jy ! Component: 100 - total flux cleaned = 0.00554342 Jy ! Component: 150 - total flux cleaned = 0.00756069 Jy ! Component: 200 - total flux cleaned = 0.00921679 Jy ! Total flux subtracted in 200 components = 0.00921679 Jy ! Clean residual min=-0.003541 max=0.002928 Jy/beam ! Clean residual mean=-0.000007 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.147607 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 0.147607 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.74 mas, bmaj=12.01 mas, bpa=3.538 degrees ! Estimated noise=1796.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336492 Jy ! Component: 100 - total flux cleaned = 0.00486759 Jy ! Component: 150 - total flux cleaned = 0.00627664 Jy ! Component: 200 - total flux cleaned = 0.00744418 Jy ! Total flux subtracted in 200 components = 0.00744418 Jy ! Clean residual min=-0.002871 max=0.002811 Jy/beam ! Clean residual mean=-0.000015 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.155051 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799494 Jy ! Component: 100 - total flux cleaned = 0.00124744 Jy ! Component: 150 - total flux cleaned = 0.00166446 Jy ! Component: 200 - total flux cleaned = 0.00205172 Jy ! Total flux subtracted in 200 components = 0.00205172 Jy ! Clean residual min=-0.002859 max=0.002770 Jy/beam ! Clean residual mean=-0.000015 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.157103 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 154 components and 0.157103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.041 mas, bpa=-3.836 degrees ! Estimated noise=1288.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279107 Jy ! Component: 100 - total flux cleaned = -0.000277876 Jy ! Component: 150 - total flux cleaned = -0.000102516 Jy ! Component: 200 - total flux cleaned = 0.000110474 Jy ! Total flux subtracted in 200 components = 0.000110474 Jy ! Clean residual min=-0.003158 max=0.002699 Jy/beam ! Clean residual mean=-0.000005 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.157214 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 189 components and 0.157214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149938Jy sigma=0.000691 ! Fit after self-cal, rms=0.149885Jy sigma=0.000690 wmodel J2224-1126_S_2017_02_19_pus_map.mod ! Writing 189 model components to file: J2224-1126_S_2017_02_19_pus_map.mod wobs J2224-1126_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2224-1126_S_2017_02_19_pus_uvs.fits wwins J2224-1126_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J2224-1126_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114777 Jy ! Component: 100 - total flux cleaned = -0.00154399 Jy ! Component: 150 - total flux cleaned = -0.00182863 Jy ! Component: 200 - total flux cleaned = -0.00205853 Jy ! Component: 250 - total flux cleaned = -0.00241525 Jy ! Component: 300 - total flux cleaned = -0.00271764 Jy ! Component: 350 - total flux cleaned = -0.00284381 Jy ! Component: 400 - total flux cleaned = -0.0029262 Jy ! Component: 450 - total flux cleaned = -0.00312763 Jy ! Component: 500 - total flux cleaned = -0.00328496 Jy ! Component: 550 - total flux cleaned = -0.00340063 Jy ! Component: 600 - total flux cleaned = -0.00347687 Jy ! Component: 650 - total flux cleaned = -0.00366345 Jy ! Component: 700 - total flux cleaned = -0.00380989 Jy ! Component: 750 - total flux cleaned = -0.00395343 Jy ! Component: 800 - total flux cleaned = -0.00388281 Jy ! Component: 850 - total flux cleaned = -0.00409189 Jy ! Component: 900 - total flux cleaned = -0.00402321 Jy ! Component: 950 - total flux cleaned = -0.00409102 Jy ! Component: 1000 - total flux cleaned = -0.00405775 Jy ! Component: 1050 - total flux cleaned = -0.004156 Jy ! Component: 1100 - total flux cleaned = -0.00415617 Jy ! Component: 1150 - total flux cleaned = -0.00415608 Jy ! Component: 1200 - total flux cleaned = -0.00421909 Jy ! Component: 1250 - total flux cleaned = -0.00418759 Jy ! Component: 1300 - total flux cleaned = -0.00418731 Jy ! Component: 1350 - total flux cleaned = -0.00406605 Jy ! Component: 1400 - total flux cleaned = -0.00406692 Jy ! Component: 1450 - total flux cleaned = -0.00406733 Jy ! Component: 1500 - total flux cleaned = -0.00409633 Jy ! Component: 1550 - total flux cleaned = -0.00400934 Jy ! Component: 1600 - total flux cleaned = -0.00395213 Jy ! Component: 1650 - total flux cleaned = -0.00395229 Jy ! Component: 1700 - total flux cleaned = -0.00398029 Jy ! Component: 1750 - total flux cleaned = -0.00384043 Jy ! Component: 1800 - total flux cleaned = -0.0038682 Jy ! Component: 1850 - total flux cleaned = -0.00375905 Jy ! Component: 1900 - total flux cleaned = -0.00375908 Jy ! Component: 1950 - total flux cleaned = -0.00362489 Jy ! Component: 2000 - total flux cleaned = -0.00359892 Jy ! Component: 2050 - total flux cleaned = -0.00352056 Jy ! Component: 2100 - total flux cleaned = -0.00352064 Jy ! Component: 2150 - total flux cleaned = -0.00349474 Jy ! Component: 2200 - total flux cleaned = -0.00341853 Jy ! Component: 2250 - total flux cleaned = -0.00339293 Jy ! Component: 2300 - total flux cleaned = -0.0032926 Jy ! Component: 2350 - total flux cleaned = -0.00319318 Jy ! Component: 2400 - total flux cleaned = -0.00314412 Jy ! Component: 2450 - total flux cleaned = -0.00309515 Jy ! Component: 2500 - total flux cleaned = -0.00304686 Jy ! Component: 2550 - total flux cleaned = -0.0030469 Jy ! Component: 2600 - total flux cleaned = -0.00302315 Jy ! Component: 2650 - total flux cleaned = -0.0030466 Jy ! Component: 2700 - total flux cleaned = -0.00302312 Jy ! Component: 2750 - total flux cleaned = -0.00300015 Jy ! Component: 2800 - total flux cleaned = -0.00306966 Jy ! Component: 2850 - total flux cleaned = -0.0030925 Jy ! Component: 2900 - total flux cleaned = -0.00306989 Jy ! Component: 2950 - total flux cleaned = -0.00306956 Jy ! Component: 3000 - total flux cleaned = -0.00309223 Jy ! Component: 3050 - total flux cleaned = -0.00309239 Jy ! Component: 3100 - total flux cleaned = -0.00315882 Jy ! Component: 3150 - total flux cleaned = -0.00322461 Jy ! Component: 3200 - total flux cleaned = -0.00322471 Jy ! Component: 3250 - total flux cleaned = -0.00331119 Jy ! Component: 3300 - total flux cleaned = -0.00328955 Jy ! Component: 3350 - total flux cleaned = -0.00326839 Jy ! Component: 3400 - total flux cleaned = -0.00333219 Jy ! Component: 3450 - total flux cleaned = -0.00337417 Jy ! Component: 3500 - total flux cleaned = -0.00339501 Jy ! Component: 3550 - total flux cleaned = -0.00345742 Jy ! Component: 3600 - total flux cleaned = -0.00347836 Jy ! Component: 3650 - total flux cleaned = -0.00356049 Jy ! Component: 3700 - total flux cleaned = -0.00349953 Jy ! Component: 3750 - total flux cleaned = -0.00360062 Jy ! Component: 3800 - total flux cleaned = -0.00366106 Jy ! Component: 3850 - total flux cleaned = -0.003661 Jy ! Component: 3900 - total flux cleaned = -0.00374032 Jy ! Component: 3950 - total flux cleaned = -0.0037403 Jy ! Component: 4000 - total flux cleaned = -0.00374037 Jy ! Component: 4050 - total flux cleaned = -0.00372109 Jy ! Total flux subtracted in 4096 components = -0.00377952 Jy ! Clean residual min=-0.001357 max=0.001263 Jy/beam ! Clean residual mean=-0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.153434 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 509 components and 0.153434 Jy ![Exited script file: muppet] wmap "J2224-1126_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.826 x 7.041 at -3.836 degrees (North through East) ! Clean map min=-0.0030257 max=0.10058 Jy/beam ! Writing clean map to FITS file: J2224-1126_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100582 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04235 1.04235 2.08469 4.16938 8.33876 16.6775 33.3551 66.7101 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.826 x 7.041 at -3.836 degrees (North through East) ! Clean map min=-0.0030257 max=0.10058 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2224-1126_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:59:59 2019