! Started logfile: J2224+6016_S_2017_09_26_pus_uvs.log on Sat May 11 13:08:01 2019 obs J2224+6016_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2224+6016_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.554233 visibilities/baseline/integration-bin. ! Found source: J2224+6016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 23464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2224+6016_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 722 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 840 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1055 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2134 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986576Jy sigma=0.009592 ! Fit after self-cal, rms=0.958827Jy sigma=0.009336 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.413 mas, bmaj=6.756 mas, bpa=48.71 degrees ! Estimated noise=1097.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299252 Jy ! Component: 100 - total flux cleaned = 0.037441 Jy ! Total flux subtracted in 100 components = 0.037441 Jy ! Clean residual min=-0.004707 max=0.005228 Jy/beam ! Clean residual mean=-0.000131 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.037441 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.037441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073921Jy sigma=0.000695 ! Fit after self-cal, rms=0.072802Jy sigma=0.000684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.543 mas, bmaj=8.146 mas, bpa=48.63 degrees ! Estimated noise=573.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114684 Jy ! Component: 100 - total flux cleaned = 0.0186347 Jy ! Component: 150 - total flux cleaned = 0.0232399 Jy ! Component: 200 - total flux cleaned = 0.0262004 Jy ! Total flux subtracted in 200 components = 0.0262004 Jy ! Clean residual min=-0.006063 max=0.008232 Jy/beam ! Clean residual mean=-0.000466 rms=0.002687 Jy/beam ! Combined flux in latest and established models = 0.0636414 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.0636414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070787Jy sigma=0.000664 ! Fit after self-cal, rms=0.070496Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.59 HN 1.04 KP 1.11 ! LA 0.77 MK 0.89 NL 1.19 OV 1.63 ! PT 0.75 ! ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.63 HN 1.04 KP 0.97 ! LA 0.76 MK 0.99 NL 1.25 OV 1.48 ! PT 0.74 ! ! ! Correcting IF 3. ! A total of 219 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.89 HN 0.98 KP 1.00 ! LA 0.76 MK 0.98 NL 1.27 OV 1.59 ! PT 0.64 ! ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.77 HN 0.82 KP 1.00* ! LA 0.69 MK 1.00* NL 1.00* OV 1.00* ! PT 0.65 ! ! ! Fit before self-cal, rms=0.070496Jy sigma=0.000661 ! Fit after self-cal, rms=0.083954Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.461 mas, bmaj=8.287 mas, bpa=47.66 degrees ! Estimated noise=610.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303123 Jy ! Component: 100 - total flux cleaned = 0.00015011 Jy ! Component: 150 - total flux cleaned = 9.92074e-05 Jy ! Component: 200 - total flux cleaned = 9.75804e-05 Jy ! Total flux subtracted in 200 components = 9.75804e-05 Jy ! Clean residual min=-0.004338 max=0.006727 Jy/beam ! Clean residual mean=-0.000200 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.063739 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.063739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083888Jy sigma=0.000639 ! Fit after self-cal, rms=0.085628Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085628Jy sigma=0.000632 ! Fit after self-cal, rms=0.103400Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.579 mas, bmaj=8.304 mas, bpa=47.27 degrees ! Estimated noise=639.154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328878 Jy ! Component: 100 - total flux cleaned = 0.000329201 Jy ! Component: 150 - total flux cleaned = 0.000392965 Jy ! Component: 200 - total flux cleaned = 0.000422189 Jy ! Total flux subtracted in 200 components = 0.000422189 Jy ! Clean residual min=-0.002637 max=0.004080 Jy/beam ! Clean residual mean=-0.000047 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.0641612 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0641612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103362Jy sigma=0.000626 ! Fit after self-cal, rms=0.104201Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272068 Jy ! Component: 100 - total flux cleaned = 0.00273731 Jy ! Component: 150 - total flux cleaned = 0.00259208 Jy ! Component: 200 - total flux cleaned = 0.00242721 Jy ! Total flux subtracted in 200 components = 0.00242721 Jy ! Clean residual min=-0.002191 max=0.002799 Jy/beam ! Clean residual mean=-0.000028 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0665884 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0665884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104073Jy sigma=0.000623 ! Fit after self-cal, rms=0.103796Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103796Jy sigma=0.000623 ! Fit after self-cal, rms=0.102926Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.511 mas, bmaj=8.234 mas, bpa=47.16 degrees ! Estimated noise=629.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170495 Jy ! Component: 100 - total flux cleaned = 0.00170834 Jy ! Component: 150 - total flux cleaned = 0.00166533 Jy ! Component: 200 - total flux cleaned = 0.00166689 Jy ! Total flux subtracted in 200 components = 0.00166689 Jy ! Clean residual min=-0.001949 max=0.002420 Jy/beam ! Clean residual mean=-0.000009 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0682553 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.0682553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102839Jy sigma=0.000622 ! Fit after self-cal, rms=0.102686Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000915991 Jy ! Component: 100 - total flux cleaned = 0.000964885 Jy ! Component: 150 - total flux cleaned = 0.000966636 Jy ! Component: 200 - total flux cleaned = 0.00092806 Jy ! Total flux subtracted in 200 components = 0.00092806 Jy ! Clean residual min=-0.001826 max=0.002358 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0691833 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.0691833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102607Jy sigma=0.000621 ! Fit after self-cal, rms=0.102408Jy sigma=0.000621 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102408Jy sigma=0.000621 ! Fit after self-cal, rms=0.098104Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.384 mas, bmaj=11.28 mas, bpa=50.44 degrees ! Estimated noise=676.031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104995 Jy ! Component: 100 - total flux cleaned = 0.000982406 Jy ! Component: 150 - total flux cleaned = 0.000953383 Jy ! Component: 200 - total flux cleaned = 0.00092908 Jy ! Total flux subtracted in 200 components = 0.00092908 Jy ! Clean residual min=-0.002282 max=0.002523 Jy/beam ! Clean residual mean=-0.000015 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0701124 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.0701124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098057Jy sigma=0.000621 ! Fit after self-cal, rms=0.097819Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614523 Jy ! Component: 100 - total flux cleaned = 0.000547748 Jy ! Component: 150 - total flux cleaned = 0.000520274 Jy ! Component: 200 - total flux cleaned = 0.00047205 Jy ! Total flux subtracted in 200 components = 0.00047205 Jy ! Clean residual min=-0.002066 max=0.002473 Jy/beam ! Clean residual mean=-0.000009 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0705845 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.0705845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097770Jy sigma=0.000620 ! Fit after self-cal, rms=0.097607Jy sigma=0.000620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.428 mas, bmaj=8.22 mas, bpa=47.81 degrees ! Estimated noise=617.783 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.428 x 8.22 at 47.81 degrees (North through East) ! Clean map min=-0.0046895 max=0.042653 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.24 mas, bmaj=6.847 mas, bpa=47.53 degrees ! Estimated noise=1186.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322164 Jy ! Component: 100 - total flux cleaned = 0.0431236 Jy ! Component: 150 - total flux cleaned = 0.0497302 Jy ! Component: 200 - total flux cleaned = 0.0535972 Jy ! Total flux subtracted in 200 components = 0.0535972 Jy ! Clean residual min=-0.004133 max=0.005347 Jy/beam ! Clean residual mean=-0.000048 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.0535972 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0535972 Jy ! Inverting map and beam ! Estimated beam: bmin=5.428 mas, bmaj=8.22 mas, bpa=47.81 degrees ! Estimated noise=617.783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624598 Jy ! Component: 100 - total flux cleaned = 0.0105309 Jy ! Component: 150 - total flux cleaned = 0.0127111 Jy ! Component: 200 - total flux cleaned = 0.013938 Jy ! Total flux subtracted in 200 components = 0.013938 Jy ! Clean residual min=-0.002425 max=0.002800 Jy/beam ! Clean residual mean=-0.000045 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0675352 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.0675352 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.384 mas, bmaj=11.28 mas, bpa=50.44 degrees ! Estimated noise=676.031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138451 Jy ! Component: 100 - total flux cleaned = 0.00158596 Jy ! Component: 150 - total flux cleaned = 0.00175791 Jy ! Component: 200 - total flux cleaned = 0.00185638 Jy ! Total flux subtracted in 200 components = 0.00185638 Jy ! Clean residual min=-0.002232 max=0.002488 Jy/beam ! Clean residual mean=-0.000034 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.0693916 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.41561e-05 Jy ! Component: 100 - total flux cleaned = 8.62702e-05 Jy ! Component: 150 - total flux cleaned = 0.000126401 Jy ! Component: 200 - total flux cleaned = 0.000199333 Jy ! Total flux subtracted in 200 components = 0.000199333 Jy ! Clean residual min=-0.002101 max=0.002370 Jy/beam ! Clean residual mean=-0.000030 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0695909 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 75 components and 0.0695909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.428 mas, bmaj=8.22 mas, bpa=47.81 degrees ! Estimated noise=617.783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330605 Jy ! Component: 100 - total flux cleaned = 0.000327267 Jy ! Component: 150 - total flux cleaned = 0.000366692 Jy ! Component: 200 - total flux cleaned = 0.000400658 Jy ! Total flux subtracted in 200 components = 0.000400658 Jy ! Clean residual min=-0.001770 max=0.002141 Jy/beam ! Clean residual mean=-0.000014 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0699916 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.0699916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097502Jy sigma=0.000620 ! Fit after self-cal, rms=0.097166Jy sigma=0.000619 wmodel J2224+6016_S_2017_09_26_pus_map.mod ! Writing 88 model components to file: J2224+6016_S_2017_09_26_pus_map.mod wobs J2224+6016_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2224+6016_S_2017_09_26_pus_uvs.fits wwins J2224+6016_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J2224+6016_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672991 Jy ! Component: 100 - total flux cleaned = 0.00130899 Jy ! Component: 150 - total flux cleaned = 0.00173778 Jy ! Component: 200 - total flux cleaned = 0.00210847 Jy ! Component: 250 - total flux cleaned = 0.0023712 Jy ! Component: 300 - total flux cleaned = 0.00262189 Jy ! Component: 350 - total flux cleaned = 0.0028087 Jy ! Component: 400 - total flux cleaned = 0.00301477 Jy ! Component: 450 - total flux cleaned = 0.00318915 Jy ! Component: 500 - total flux cleaned = 0.00340637 Jy ! Component: 550 - total flux cleaned = 0.00359284 Jy ! Component: 600 - total flux cleaned = 0.00372892 Jy ! Component: 650 - total flux cleaned = 0.00388367 Jy ! Component: 700 - total flux cleaned = 0.00401283 Jy ! Component: 750 - total flux cleaned = 0.00413824 Jy ! Component: 800 - total flux cleaned = 0.00421986 Jy ! Component: 850 - total flux cleaned = 0.0043391 Jy ! Component: 900 - total flux cleaned = 0.00443556 Jy ! Component: 950 - total flux cleaned = 0.00449223 Jy ! Component: 1000 - total flux cleaned = 0.00458525 Jy ! Component: 1050 - total flux cleaned = 0.0046945 Jy ! Component: 1100 - total flux cleaned = 0.00481952 Jy ! Component: 1150 - total flux cleaned = 0.00492472 Jy ! Component: 1200 - total flux cleaned = 0.00502779 Jy ! Component: 1250 - total flux cleaned = 0.0051122 Jy ! Component: 1300 - total flux cleaned = 0.00517857 Jy ! Component: 1350 - total flux cleaned = 0.00527614 Jy ! Component: 1400 - total flux cleaned = 0.00535569 Jy ! Component: 1450 - total flux cleaned = 0.00543392 Jy ! Component: 1500 - total flux cleaned = 0.00551087 Jy ! Component: 1550 - total flux cleaned = 0.00557159 Jy ! Component: 1600 - total flux cleaned = 0.00567582 Jy ! Component: 1650 - total flux cleaned = 0.00576352 Jy ! Component: 1700 - total flux cleaned = 0.00580691 Jy ! Component: 1750 - total flux cleaned = 0.00593449 Jy ! Component: 1800 - total flux cleaned = 0.00596227 Jy ! Component: 1850 - total flux cleaned = 0.00597597 Jy ! Component: 1900 - total flux cleaned = 0.00602998 Jy ! Component: 1950 - total flux cleaned = 0.00605648 Jy ! Component: 2000 - total flux cleaned = 0.00608271 Jy ! Component: 2050 - total flux cleaned = 0.00610881 Jy ! Component: 2100 - total flux cleaned = 0.00617302 Jy ! Component: 2150 - total flux cleaned = 0.00617307 Jy ! Component: 2200 - total flux cleaned = 0.00619829 Jy ! Component: 2250 - total flux cleaned = 0.00623543 Jy ! Component: 2300 - total flux cleaned = 0.00628421 Jy ! Component: 2350 - total flux cleaned = 0.00628427 Jy ! Component: 2400 - total flux cleaned = 0.00632016 Jy ! Component: 2450 - total flux cleaned = 0.0063556 Jy ! Component: 2500 - total flux cleaned = 0.00637892 Jy ! Component: 2550 - total flux cleaned = 0.00640215 Jy ! Component: 2600 - total flux cleaned = 0.00642526 Jy ! Component: 2650 - total flux cleaned = 0.00644802 Jy ! Component: 2700 - total flux cleaned = 0.00647064 Jy ! Component: 2750 - total flux cleaned = 0.00648192 Jy ! Component: 2800 - total flux cleaned = 0.00650426 Jy ! Component: 2850 - total flux cleaned = 0.00652638 Jy ! Component: 2900 - total flux cleaned = 0.00653738 Jy ! Component: 2950 - total flux cleaned = 0.00655918 Jy ! Component: 3000 - total flux cleaned = 0.00659152 Jy ! Component: 3050 - total flux cleaned = 0.00661301 Jy ! Component: 3100 - total flux cleaned = 0.00665566 Jy ! Component: 3150 - total flux cleaned = 0.00667683 Jy ! Component: 3200 - total flux cleaned = 0.00668739 Jy ! Component: 3250 - total flux cleaned = 0.00673985 Jy ! Component: 3300 - total flux cleaned = 0.00675021 Jy ! Component: 3350 - total flux cleaned = 0.00679177 Jy ! Component: 3400 - total flux cleaned = 0.00682276 Jy ! Component: 3450 - total flux cleaned = 0.00685365 Jy ! Component: 3500 - total flux cleaned = 0.00689468 Jy ! Component: 3550 - total flux cleaned = 0.00691513 Jy ! Component: 3600 - total flux cleaned = 0.00696604 Jy ! Component: 3650 - total flux cleaned = 0.00697618 Jy ! Component: 3700 - total flux cleaned = 0.00701667 Jy ! Component: 3750 - total flux cleaned = 0.00705704 Jy ! Component: 3800 - total flux cleaned = 0.00709726 Jy ! Component: 3850 - total flux cleaned = 0.00713743 Jy ! Component: 3900 - total flux cleaned = 0.00715745 Jy ! Component: 3950 - total flux cleaned = 0.00721746 Jy ! Component: 4000 - total flux cleaned = 0.00727733 Jy ! Component: 4050 - total flux cleaned = 0.00731719 Jy ! Total flux subtracted in 4096 components = 0.0073669 Jy ! Clean residual min=-0.000540 max=0.000630 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0773585 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 395 components and 0.0773586 Jy ![Exited script file: muppet] wmap "J2224+6016_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.428 x 8.22 at 47.81 degrees (North through East) ! Clean map min=-0.0044517 max=0.04401 Jy/beam ! Writing clean map to FITS file: J2224+6016_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0440095 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176707 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20456 1.20456 2.40912 4.81824 9.63649 19.273 38.546 77.0919 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.044 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.428 x 8.22 at 47.81 degrees (North through East) ! Clean map min=-0.0044517 max=0.04401 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2224+6016_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:08:07 2019