! Started logfile: J2223-3455_S_2017_10_21_pus_uvs.log on Sat May 11 21:07:18 2019 obs J2223-3455_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2223-3455_S_2017_10_21_pus_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.541667 visibilities/baseline/integration-bin. ! Found source: J2223-3455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2223-3455_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.749685Jy sigma=0.005624 ! Fit after self-cal, rms=0.739124Jy sigma=0.005541 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=27.66 mas, bpa=-22.44 degrees ! Estimated noise=3256.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199191 Jy ! Component: 100 - total flux cleaned = 0.250879 Jy ! Total flux subtracted in 100 components = 0.250879 Jy ! Clean residual min=-0.020588 max=0.028649 Jy/beam ! Clean residual mean=0.000030 rms=0.007728 Jy/beam ! Combined flux in latest and established models = 0.250879 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.250879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129967Jy sigma=0.000923 ! Fit after self-cal, rms=0.129939Jy sigma=0.000923 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=28.34 mas, bpa=-22.5 degrees ! Estimated noise=2370.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316357 Jy ! Component: 100 - total flux cleaned = 0.0462072 Jy ! Component: 150 - total flux cleaned = 0.0543927 Jy ! Component: 200 - total flux cleaned = 0.0582776 Jy ! Total flux subtracted in 200 components = 0.0582776 Jy ! Clean residual min=-0.021739 max=0.041941 Jy/beam ! Clean residual mean=0.000098 rms=0.009135 Jy/beam ! Combined flux in latest and established models = 0.309156 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 93 components and 0.309157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122950Jy sigma=0.000864 ! Fit after self-cal, rms=0.122906Jy sigma=0.000863 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.00* KP 0.98 ! LA 1.06 MK 1.04 NL 1.00* OV 0.88 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.00* KP 0.96 ! LA 1.01 MK 1.00 NL 1.04 OV 0.95 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.98 ! LA 0.81 MK 1.01 NL 1.14 OV 0.83 ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.00* KP 1.00* ! LA 1.34 MK 1.21 NL 1.00* OV 1.00* ! PT 0.84 ! ! ! Fit before self-cal, rms=0.122906Jy sigma=0.000863 ! Fit after self-cal, rms=0.123478Jy sigma=0.000830 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=27.89 mas, bpa=-22.6 degrees ! Estimated noise=2386.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435317 Jy ! Component: 100 - total flux cleaned = 0.00482456 Jy ! Component: 150 - total flux cleaned = 0.00503403 Jy ! Component: 200 - total flux cleaned = 0.00503606 Jy ! Total flux subtracted in 200 components = 0.00503606 Jy ! Clean residual min=-0.018746 max=0.035853 Jy/beam ! Clean residual mean=0.000187 rms=0.008156 Jy/beam ! Combined flux in latest and established models = 0.314193 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.314193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122743Jy sigma=0.000824 ! Fit after self-cal, rms=0.123516Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123516Jy sigma=0.000823 ! Fit after self-cal, rms=0.125974Jy sigma=0.000822 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=27.68 mas, bpa=-22.59 degrees ! Estimated noise=2395.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035574 Jy ! Component: 100 - total flux cleaned = 0.00457709 Jy ! Component: 150 - total flux cleaned = 0.0044356 Jy ! Component: 200 - total flux cleaned = 0.00420278 Jy ! Total flux subtracted in 200 components = 0.00420278 Jy ! Clean residual min=-0.018626 max=0.034080 Jy/beam ! Clean residual mean=0.000168 rms=0.008059 Jy/beam ! Combined flux in latest and established models = 0.318395 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 0.318395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125558Jy sigma=0.000819 ! Fit after self-cal, rms=0.125641Jy sigma=0.000819 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166137 Jy ! Component: 100 - total flux cleaned = -0.000264247 Jy ! Component: 150 - total flux cleaned = -0.000264914 Jy ! Component: 200 - total flux cleaned = -0.000344235 Jy ! Total flux subtracted in 200 components = -0.000344235 Jy ! Clean residual min=-0.018561 max=0.033640 Jy/beam ! Clean residual mean=0.000168 rms=0.008043 Jy/beam ! Combined flux in latest and established models = 0.318051 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 138 components and 0.318051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125528Jy sigma=0.000818 ! Fit after self-cal, rms=0.125464Jy sigma=0.000818 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125464Jy sigma=0.000818 ! Fit after self-cal, rms=0.124634Jy sigma=0.000806 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=27.54 mas, bpa=-22.58 degrees ! Estimated noise=2395.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155898 Jy ! Component: 100 - total flux cleaned = 0.00191617 Jy ! Component: 150 - total flux cleaned = 0.00211837 Jy ! Component: 200 - total flux cleaned = 0.00212041 Jy ! Total flux subtracted in 200 components = 0.00212041 Jy ! Clean residual min=-0.017275 max=0.030488 Jy/beam ! Clean residual mean=0.000140 rms=0.007884 Jy/beam ! Combined flux in latest and established models = 0.320171 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 146 components and 0.320171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124453Jy sigma=0.000805 ! Fit after self-cal, rms=0.124515Jy sigma=0.000805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.69516e-06 Jy ! Component: 100 - total flux cleaned = -0.000309398 Jy ! Component: 150 - total flux cleaned = -0.000590481 Jy ! Component: 200 - total flux cleaned = -0.00079038 Jy ! Total flux subtracted in 200 components = -0.00079038 Jy ! Clean residual min=-0.017374 max=0.030331 Jy/beam ! Clean residual mean=0.000137 rms=0.007863 Jy/beam ! Combined flux in latest and established models = 0.319381 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 152 components and 0.319381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124436Jy sigma=0.000804 ! Fit after self-cal, rms=0.124401Jy sigma=0.000804 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124401Jy sigma=0.000804 ! Fit after self-cal, rms=0.124850Jy sigma=0.000804 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10 mas, bmaj=39.88 mas, bpa=-8.063 degrees ! Estimated noise=2817.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605171 Jy ! Component: 100 - total flux cleaned = -0.00035144 Jy ! Component: 150 - total flux cleaned = -5.50098e-05 Jy ! Component: 200 - total flux cleaned = 7.8935e-05 Jy ! Total flux subtracted in 200 components = 7.8935e-05 Jy ! Clean residual min=-0.024812 max=0.043852 Jy/beam ! Clean residual mean=0.000215 rms=0.012200 Jy/beam ! Combined flux in latest and established models = 0.31946 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 186 components and 0.31946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124814Jy sigma=0.000803 ! Fit after self-cal, rms=0.124810Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.09565e-05 Jy ! Component: 100 - total flux cleaned = -9.14899e-05 Jy ! Component: 150 - total flux cleaned = -0.000205544 Jy ! Component: 200 - total flux cleaned = -0.000318631 Jy ! Total flux subtracted in 200 components = -0.000318631 Jy ! Clean residual min=-0.024769 max=0.043679 Jy/beam ! Clean residual mean=0.000213 rms=0.012186 Jy/beam ! Combined flux in latest and established models = 0.319142 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 197 components and 0.319142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124767Jy sigma=0.000802 ! Fit after self-cal, rms=0.124747Jy sigma=0.000802 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=27.4 mas, bpa=-22.56 degrees ! Estimated noise=2388.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 27.4 at -22.56 degrees (North through East) ! Clean map min=-0.017115 max=0.25898 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=26.57 mas, bpa=-22.55 degrees ! Estimated noise=3342.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203195 Jy ! Component: 100 - total flux cleaned = 0.25133 Jy ! Component: 150 - total flux cleaned = 0.275924 Jy ! Component: 200 - total flux cleaned = 0.292876 Jy ! Total flux subtracted in 200 components = 0.292876 Jy ! Clean residual min=-0.018474 max=0.023358 Jy/beam ! Clean residual mean=0.000027 rms=0.006411 Jy/beam ! Combined flux in latest and established models = 0.292876 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.292876 Jy ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=27.4 mas, bpa=-22.56 degrees ! Estimated noise=2388.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126408 Jy ! Component: 100 - total flux cleaned = 0.0202832 Jy ! Component: 150 - total flux cleaned = 0.0233016 Jy ! Component: 200 - total flux cleaned = 0.0251488 Jy ! Total flux subtracted in 200 components = 0.0251488 Jy ! Clean residual min=-0.017734 max=0.030612 Jy/beam ! Clean residual mean=0.000120 rms=0.007941 Jy/beam ! Combined flux in latest and established models = 0.318025 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 78 components and 0.318025 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10 mas, bmaj=39.88 mas, bpa=-8.063 degrees ! Estimated noise=2817.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252822 Jy ! Component: 100 - total flux cleaned = 0.00276386 Jy ! Component: 150 - total flux cleaned = 0.00256597 Jy ! Component: 200 - total flux cleaned = 0.00247317 Jy ! Total flux subtracted in 200 components = 0.00247317 Jy ! Clean residual min=-0.025001 max=0.044662 Jy/beam ! Clean residual mean=0.000221 rms=0.012287 Jy/beam ! Combined flux in latest and established models = 0.320498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.63695e-05 Jy ! Component: 100 - total flux cleaned = -0.000168993 Jy ! Component: 150 - total flux cleaned = -0.000247328 Jy ! Component: 200 - total flux cleaned = -0.000247528 Jy ! Total flux subtracted in 200 components = -0.000247528 Jy ! Clean residual min=-0.025020 max=0.044371 Jy/beam ! Clean residual mean=0.000219 rms=0.012258 Jy/beam ! Combined flux in latest and established models = 0.320251 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 112 components and 0.320251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=27.4 mas, bpa=-22.56 degrees ! Estimated noise=2388.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17597e-05 Jy ! Component: 100 - total flux cleaned = -0.000240273 Jy ! Component: 150 - total flux cleaned = -0.000431126 Jy ! Component: 200 - total flux cleaned = -0.000515352 Jy ! Total flux subtracted in 200 components = -0.000515352 Jy ! Clean residual min=-0.017359 max=0.030089 Jy/beam ! Clean residual mean=0.000125 rms=0.007850 Jy/beam ! Combined flux in latest and established models = 0.319735 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 127 components and 0.319735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124942Jy sigma=0.000804 ! Fit after self-cal, rms=0.124875Jy sigma=0.000804 wmodel J2223-3455_S_2017_10_21_pus_map.mod ! Writing 127 model components to file: J2223-3455_S_2017_10_21_pus_map.mod wobs J2223-3455_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2223-3455_S_2017_10_21_pus_uvs.fits wwins J2223-3455_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2223-3455_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123012 Jy ! Component: 100 - total flux cleaned = 0.0213841 Jy ! Component: 150 - total flux cleaned = 0.0261927 Jy ! Component: 200 - total flux cleaned = 0.0296583 Jy ! Component: 250 - total flux cleaned = 0.0325653 Jy ! Component: 300 - total flux cleaned = 0.034796 Jy ! Component: 350 - total flux cleaned = 0.0366592 Jy ! Component: 400 - total flux cleaned = 0.0380145 Jy ! Component: 450 - total flux cleaned = 0.038739 Jy ! Component: 500 - total flux cleaned = 0.0392516 Jy ! Component: 550 - total flux cleaned = 0.0403716 Jy ! Component: 600 - total flux cleaned = 0.0412728 Jy ! Component: 650 - total flux cleaned = 0.0418427 Jy ! Component: 700 - total flux cleaned = 0.0425175 Jy ! Component: 750 - total flux cleaned = 0.0432853 Jy ! Component: 800 - total flux cleaned = 0.0437719 Jy ! Component: 850 - total flux cleaned = 0.0441212 Jy ! Component: 900 - total flux cleaned = 0.0444563 Jy ! Component: 950 - total flux cleaned = 0.0447773 Jy ! Component: 1000 - total flux cleaned = 0.0453865 Jy ! Component: 1050 - total flux cleaned = 0.0459685 Jy ! Component: 1100 - total flux cleaned = 0.0459689 Jy ! Component: 1150 - total flux cleaned = 0.0457901 Jy ! Component: 1200 - total flux cleaned = 0.04579 Jy ! Component: 1250 - total flux cleaned = 0.0452907 Jy ! Component: 1300 - total flux cleaned = 0.0447301 Jy ! Component: 1350 - total flux cleaned = 0.0438 Jy ! Component: 1400 - total flux cleaned = 0.0429009 Jy ! Component: 1450 - total flux cleaned = 0.0420344 Jy ! Component: 1500 - total flux cleaned = 0.0411261 Jy ! Component: 1550 - total flux cleaned = 0.0403148 Jy ! Component: 1600 - total flux cleaned = 0.0394631 Jy ! Component: 1650 - total flux cleaned = 0.0385117 Jy ! Component: 1700 - total flux cleaned = 0.0377739 Jy ! Component: 1750 - total flux cleaned = 0.0369959 Jy ! Component: 1800 - total flux cleaned = 0.0360667 Jy ! Component: 1850 - total flux cleaned = 0.0353887 Jy ! Component: 1900 - total flux cleaned = 0.0344548 Jy ! Component: 1950 - total flux cleaned = 0.0338675 Jy ! Component: 2000 - total flux cleaned = 0.0331399 Jy ! Component: 2050 - total flux cleaned = 0.0326321 Jy ! Component: 2100 - total flux cleaned = 0.0318911 Jy ! Component: 2150 - total flux cleaned = 0.0316022 Jy ! Component: 2200 - total flux cleaned = 0.031037 Jy ! Component: 2250 - total flux cleaned = 0.0305768 Jy ! Component: 2300 - total flux cleaned = 0.0300844 Jy ! Component: 2350 - total flux cleaned = 0.0296886 Jy ! Component: 2400 - total flux cleaned = 0.0292582 Jy ! Component: 2450 - total flux cleaned = 0.0287099 Jy ! Component: 2500 - total flux cleaned = 0.0284204 Jy ! Component: 2550 - total flux cleaned = 0.027891 Jy ! Component: 2600 - total flux cleaned = 0.0273313 Jy ! Component: 2650 - total flux cleaned = 0.0269388 Jy ! Component: 2700 - total flux cleaned = 0.0266286 Jy ! Component: 2750 - total flux cleaned = 0.0263617 Jy ! Component: 2800 - total flux cleaned = 0.0259485 Jy ! Component: 2850 - total flux cleaned = 0.0256526 Jy ! Component: 2900 - total flux cleaned = 0.0253966 Jy ! Component: 2950 - total flux cleaned = 0.0250716 Jy ! Component: 3000 - total flux cleaned = 0.0247505 Jy ! Component: 3050 - total flux cleaned = 0.0246093 Jy ! Component: 3100 - total flux cleaned = 0.0242955 Jy ! Component: 3150 - total flux cleaned = 0.0240887 Jy ! Component: 3200 - total flux cleaned = 0.0240207 Jy ! Component: 3250 - total flux cleaned = 0.023885 Jy ! Component: 3300 - total flux cleaned = 0.0235502 Jy ! Component: 3350 - total flux cleaned = 0.0233516 Jy ! Component: 3400 - total flux cleaned = 0.023253 Jy ! Component: 3450 - total flux cleaned = 0.0230247 Jy ! Component: 3500 - total flux cleaned = 0.0228627 Jy ! Component: 3550 - total flux cleaned = 0.0226703 Jy ! Component: 3600 - total flux cleaned = 0.0225105 Jy ! Component: 3650 - total flux cleaned = 0.0221626 Jy ! Component: 3700 - total flux cleaned = 0.0219742 Jy ! Component: 3750 - total flux cleaned = 0.0218804 Jy ! Component: 3800 - total flux cleaned = 0.021601 Jy ! Component: 3850 - total flux cleaned = 0.0214778 Jy ! Component: 3900 - total flux cleaned = 0.0212633 Jy ! Component: 3950 - total flux cleaned = 0.0211719 Jy ! Component: 4000 - total flux cleaned = 0.0209293 Jy ! Component: 4050 - total flux cleaned = 0.0208087 Jy ! Total flux subtracted in 4096 components = 0.0206585 Jy ! Clean residual min=-0.001770 max=0.001618 Jy/beam ! Clean residual mean=-0.000035 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.340394 Jy keep ! Adding 520 model components to the UV plane model. ! The established model now contains 647 components and 0.340394 Jy ![Exited script file: muppet] wmap "J2223-3455_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 27.4 at -22.56 degrees (North through East) ! Clean map min=-0.0074944 max=0.2546 Jy/beam ! Writing clean map to FITS file: J2223-3455_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.254604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000714451 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.841839 0.841839 1.68368 3.36736 6.73471 13.4694 26.9389 53.8777 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.254 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 27.4 at -22.56 degrees (North through East) ! Clean map min=-0.0074944 max=0.2546 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2223-3455_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:07:22 2019