! Started logfile: J2223-3455_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:42 2019 obs J2223-3455_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2223-3455_S_2017_10_09_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.532764 visibilities/baseline/integration-bin. ! Found source: J2223-3455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2223-3455_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.824790Jy sigma=0.005695 ! Fit after self-cal, rms=0.802256Jy sigma=0.005537 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=16.44 mas, bpa=-17.12 degrees ! Estimated noise=2507.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147173 Jy ! Component: 100 - total flux cleaned = 0.202516 Jy ! Total flux subtracted in 100 components = 0.202516 Jy ! Clean residual min=-0.024657 max=0.028395 Jy/beam ! Clean residual mean=0.000079 rms=0.006162 Jy/beam ! Combined flux in latest and established models = 0.202516 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.202516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141787Jy sigma=0.000902 ! Fit after self-cal, rms=0.141497Jy sigma=0.000901 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=18.31 mas, bpa=-16.65 degrees ! Estimated noise=2179.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042122 Jy ! Component: 100 - total flux cleaned = 0.0664298 Jy ! Component: 150 - total flux cleaned = 0.0815497 Jy ! Component: 200 - total flux cleaned = 0.0891223 Jy ! Total flux subtracted in 200 components = 0.0891223 Jy ! Clean residual min=-0.019958 max=0.031186 Jy/beam ! Clean residual mean=0.000273 rms=0.005694 Jy/beam ! Combined flux in latest and established models = 0.291638 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.291638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126715Jy sigma=0.000810 ! Fit after self-cal, rms=0.126521Jy sigma=0.000809 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.89 HN 1.36 KP 0.95 ! LA 1.20 MK 1.00 NL 0.91 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.06 FD 0.93 HN 1.86 KP 0.99 ! LA 1.11 MK 0.91 NL 0.98 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.94 HN 1.32 KP 0.85 ! LA 0.86 MK 0.97 NL 1.16 OV 1.00* ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 0.74 KP 1.00* ! LA 1.00* MK 1.29 NL 1.00* OV 1.00* ! PT 0.60 ! ! ! Fit before self-cal, rms=0.126521Jy sigma=0.000809 ! Fit after self-cal, rms=0.133317Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=19.62 mas, bpa=-17.49 degrees ! Estimated noise=2344.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, 97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285918 Jy ! Component: 100 - total flux cleaned = 0.0411012 Jy ! Component: 150 - total flux cleaned = 0.0449464 Jy ! Component: 200 - total flux cleaned = 0.048799 Jy ! Total flux subtracted in 200 components = 0.048799 Jy ! Clean residual min=-0.012296 max=0.011084 Jy/beam ! Clean residual mean=0.000017 rms=0.003225 Jy/beam ! Combined flux in latest and established models = 0.340437 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 104 components and 0.340437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127269Jy sigma=0.000708 ! Fit after self-cal, rms=0.126848Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126848Jy sigma=0.000702 ! Fit after self-cal, rms=0.128636Jy sigma=0.000693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=19.81 mas, bpa=-17.48 degrees ! Estimated noise=2337.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635182 Jy ! Component: 100 - total flux cleaned = 0.00770901 Jy ! Component: 150 - total flux cleaned = 0.00885998 Jy ! Component: 200 - total flux cleaned = 0.0102623 Jy ! Total flux subtracted in 200 components = 0.0102623 Jy ! Clean residual min=-0.010911 max=0.008664 Jy/beam ! Clean residual mean=0.000049 rms=0.002520 Jy/beam ! Combined flux in latest and established models = 0.3507 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 149 components and 0.3507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127409Jy sigma=0.000684 ! Fit after self-cal, rms=0.127280Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263881 Jy ! Component: 100 - total flux cleaned = 0.00368011 Jy ! Component: 150 - total flux cleaned = 0.0045923 Jy ! Component: 200 - total flux cleaned = 0.0051333 Jy ! Total flux subtracted in 200 components = 0.0051333 Jy ! Clean residual min=-0.010396 max=0.008574 Jy/beam ! Clean residual mean=0.000028 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.355833 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 173 components and 0.355833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126823Jy sigma=0.000681 ! Fit after self-cal, rms=0.126758Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126758Jy sigma=0.000681 ! Fit after self-cal, rms=0.129453Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=19.98 mas, bpa=-17.52 degrees ! Estimated noise=2336.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000498906 Jy ! Component: 100 - total flux cleaned = 0.000357667 Jy ! Component: 150 - total flux cleaned = 0.000844532 Jy ! Component: 200 - total flux cleaned = 0.000953371 Jy ! Total flux subtracted in 200 components = 0.000953371 Jy ! Clean residual min=-0.007055 max=0.008061 Jy/beam ! Clean residual mean=0.000058 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 0.356786 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 197 components and 0.356786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129120Jy sigma=0.000670 ! Fit after self-cal, rms=0.129138Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705217 Jy ! Component: 100 - total flux cleaned = 0.000910479 Jy ! Component: 150 - total flux cleaned = 0.00100662 Jy ! Component: 200 - total flux cleaned = 0.00100668 Jy ! Total flux subtracted in 200 components = 0.00100668 Jy ! Clean residual min=-0.006696 max=0.008010 Jy/beam ! Clean residual mean=0.000050 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.357793 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 208 components and 0.357793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128974Jy sigma=0.000669 ! Fit after self-cal, rms=0.128951Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128951Jy sigma=0.000669 ! Fit after self-cal, rms=0.130798Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.772 mas, bmaj=33.61 mas, bpa=-6.559 degrees ! Estimated noise=2778.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190317 Jy ! Component: 100 - total flux cleaned = 2.48281e-05 Jy ! Component: 150 - total flux cleaned = -0.000194916 Jy ! Component: 200 - total flux cleaned = -0.000331905 Jy ! Total flux subtracted in 200 components = -0.000331905 Jy ! Clean residual min=-0.007499 max=0.009757 Jy/beam ! Clean residual mean=0.000091 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 0.357461 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 235 components and 0.357461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130652Jy sigma=0.000667 ! Fit after self-cal, rms=0.130632Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409551 Jy ! Component: 100 - total flux cleaned = 0.000282705 Jy ! Component: 150 - total flux cleaned = 0.000165852 Jy ! Component: 200 - total flux cleaned = 0.000111114 Jy ! Total flux subtracted in 200 components = 0.000111114 Jy ! Clean residual min=-0.007456 max=0.009768 Jy/beam ! Clean residual mean=0.000086 rms=0.002681 Jy/beam ! Combined flux in latest and established models = 0.357572 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 248 components and 0.357572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130554Jy sigma=0.000667 ! Fit after self-cal, rms=0.130536Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=20.21 mas, bpa=-17.63 degrees ! Estimated noise=2344.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 20.21 at -17.63 degrees (North through East) ! Clean map min=-0.0059826 max=0.19493 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=17.7 mas, bpa=-17.77 degrees ! Estimated noise=2766.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158042 Jy ! Component: 100 - total flux cleaned = 0.210802 Jy ! Component: 150 - total flux cleaned = 0.243081 Jy ! Component: 200 - total flux cleaned = 0.266167 Jy ! Total flux subtracted in 200 components = 0.266167 Jy ! Clean residual min=-0.013842 max=0.014172 Jy/beam ! Clean residual mean=0.000073 rms=0.003618 Jy/beam ! Combined flux in latest and established models = 0.266167 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.266167 Jy ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=20.21 mas, bpa=-17.63 degrees ! Estimated noise=2344.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215843 Jy ! Component: 100 - total flux cleaned = 0.0368053 Jy ! Component: 150 - total flux cleaned = 0.0481794 Jy ! Component: 200 - total flux cleaned = 0.0569243 Jy ! Total flux subtracted in 200 components = 0.0569243 Jy ! Clean residual min=-0.008786 max=0.008212 Jy/beam ! Clean residual mean=0.000047 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.323092 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 119 components and 0.323092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.772 mas, bmaj=33.61 mas, bpa=-6.559 degrees ! Estimated noise=2778.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00912557 Jy ! Component: 100 - total flux cleaned = 0.0154155 Jy ! Component: 150 - total flux cleaned = 0.0201492 Jy ! Component: 200 - total flux cleaned = 0.0237607 Jy ! Total flux subtracted in 200 components = 0.0237607 Jy ! Clean residual min=-0.008537 max=0.009693 Jy/beam ! Clean residual mean=0.000058 rms=0.002898 Jy/beam ! Combined flux in latest and established models = 0.346852 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238325 Jy ! Component: 100 - total flux cleaned = 0.00366845 Jy ! Component: 150 - total flux cleaned = 0.00466541 Jy ! Component: 200 - total flux cleaned = 0.00519808 Jy ! Total flux subtracted in 200 components = 0.00519808 Jy ! Clean residual min=-0.007811 max=0.009464 Jy/beam ! Clean residual mean=0.000051 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 0.35205 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 225 components and 0.352051 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=20.21 mas, bpa=-17.63 degrees ! Estimated noise=2344.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147366 Jy ! Component: 100 - total flux cleaned = 0.000137277 Jy ! Component: 150 - total flux cleaned = 0.000769925 Jy ! Component: 200 - total flux cleaned = 0.000770355 Jy ! Total flux subtracted in 200 components = 0.000770355 Jy ! Clean residual min=-0.006618 max=0.007771 Jy/beam ! Clean residual mean=0.000040 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.352821 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 244 components and 0.352821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130790Jy sigma=0.000669 ! Fit after self-cal, rms=0.130711Jy sigma=0.000669 wmodel J2223-3455_S_2017_10_09_pus_map.mod ! Writing 244 model components to file: J2223-3455_S_2017_10_09_pus_map.mod wobs J2223-3455_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2223-3455_S_2017_10_09_pus_uvs.fits wwins J2223-3455_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2223-3455_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335688 Jy ! Component: 100 - total flux cleaned = 0.00481568 Jy ! Component: 150 - total flux cleaned = 0.00559007 Jy ! Component: 200 - total flux cleaned = 0.00662844 Jy ! Component: 250 - total flux cleaned = 0.00722064 Jy ! Component: 300 - total flux cleaned = 0.00787443 Jy ! Component: 350 - total flux cleaned = 0.00814199 Jy ! Component: 400 - total flux cleaned = 0.00865649 Jy ! Component: 450 - total flux cleaned = 0.00915173 Jy ! Component: 500 - total flux cleaned = 0.00955066 Jy ! Component: 550 - total flux cleaned = 0.00955057 Jy ! Component: 600 - total flux cleaned = 0.0093995 Jy ! Component: 650 - total flux cleaned = 0.00932724 Jy ! Component: 700 - total flux cleaned = 0.00954198 Jy ! Component: 750 - total flux cleaned = 0.00933016 Jy ! Component: 800 - total flux cleaned = 0.00939947 Jy ! Component: 850 - total flux cleaned = 0.00939885 Jy ! Component: 900 - total flux cleaned = 0.00926596 Jy ! Component: 950 - total flux cleaned = 0.0093948 Jy ! Component: 1000 - total flux cleaned = 0.00933107 Jy ! Component: 1050 - total flux cleaned = 0.00933068 Jy ! Component: 1100 - total flux cleaned = 0.00945133 Jy ! Component: 1150 - total flux cleaned = 0.00933228 Jy ! Component: 1200 - total flux cleaned = 0.00974222 Jy ! Component: 1250 - total flux cleaned = 0.00979992 Jy ! Component: 1300 - total flux cleaned = 0.0101386 Jy ! Component: 1350 - total flux cleaned = 0.0104156 Jy ! Component: 1400 - total flux cleaned = 0.0106339 Jy ! Component: 1450 - total flux cleaned = 0.0110109 Jy ! Component: 1500 - total flux cleaned = 0.0113814 Jy ! Component: 1550 - total flux cleaned = 0.0114856 Jy ! Component: 1600 - total flux cleaned = 0.0118459 Jy ! Component: 1650 - total flux cleaned = 0.0121489 Jy ! Component: 1700 - total flux cleaned = 0.0124986 Jy ! Component: 1750 - total flux cleaned = 0.0127934 Jy ! Component: 1800 - total flux cleaned = 0.0132297 Jy ! Component: 1850 - total flux cleaned = 0.0135652 Jy ! Component: 1900 - total flux cleaned = 0.0138965 Jy ! Component: 1950 - total flux cleaned = 0.0141296 Jy ! Component: 2000 - total flux cleaned = 0.0144523 Jy ! Component: 2050 - total flux cleaned = 0.0146802 Jy ! Component: 2100 - total flux cleaned = 0.014996 Jy ! Component: 2150 - total flux cleaned = 0.0153074 Jy ! Component: 2200 - total flux cleaned = 0.0155712 Jy ! Component: 2250 - total flux cleaned = 0.0159193 Jy ! Component: 2300 - total flux cleaned = 0.0160907 Jy ! Component: 2350 - total flux cleaned = 0.016303 Jy ! Component: 2400 - total flux cleaned = 0.016514 Jy ! Component: 2450 - total flux cleaned = 0.016847 Jy ! Component: 2500 - total flux cleaned = 0.0169297 Jy ! Component: 2550 - total flux cleaned = 0.0171753 Jy ! Component: 2600 - total flux cleaned = 0.0174177 Jy ! Component: 2650 - total flux cleaned = 0.017618 Jy ! Component: 2700 - total flux cleaned = 0.0178958 Jy ! Component: 2750 - total flux cleaned = 0.0181707 Jy ! Component: 2800 - total flux cleaned = 0.0184037 Jy ! Component: 2850 - total flux cleaned = 0.0186342 Jy ! Component: 2900 - total flux cleaned = 0.0189007 Jy ! Component: 2950 - total flux cleaned = 0.0190512 Jy ! Component: 3000 - total flux cleaned = 0.0192002 Jy ! Component: 3050 - total flux cleaned = 0.0193855 Jy ! Component: 3100 - total flux cleaned = 0.0194958 Jy ! Component: 3150 - total flux cleaned = 0.0197145 Jy ! Component: 3200 - total flux cleaned = 0.019787 Jy ! Component: 3250 - total flux cleaned = 0.0200018 Jy ! Component: 3300 - total flux cleaned = 0.0201433 Jy ! Component: 3350 - total flux cleaned = 0.0202838 Jy ! Component: 3400 - total flux cleaned = 0.0203887 Jy ! Component: 3450 - total flux cleaned = 0.0205966 Jy ! Component: 3500 - total flux cleaned = 0.0207339 Jy ! Component: 3550 - total flux cleaned = 0.0207678 Jy ! Component: 3600 - total flux cleaned = 0.0208697 Jy ! Component: 3650 - total flux cleaned = 0.0211048 Jy ! Component: 3700 - total flux cleaned = 0.0212044 Jy ! Component: 3750 - total flux cleaned = 0.0213036 Jy ! Component: 3800 - total flux cleaned = 0.0213691 Jy ! Component: 3850 - total flux cleaned = 0.0215325 Jy ! Component: 3900 - total flux cleaned = 0.0216623 Jy ! Component: 3950 - total flux cleaned = 0.0217588 Jy ! Component: 4000 - total flux cleaned = 0.0216948 Jy ! Component: 4050 - total flux cleaned = 0.0217587 Jy ! Total flux subtracted in 4096 components = 0.0218535 Jy ! Clean residual min=-0.001838 max=0.001845 Jy/beam ! Clean residual mean=-0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.374674 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 511 components and 0.374675 Jy ![Exited script file: muppet] wmap "J2223-3455_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 20.21 at -17.63 degrees (North through East) ! Clean map min=-0.0048656 max=0.20137 Jy/beam ! Writing clean map to FITS file: J2223-3455_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.201368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000602594 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.897752 0.897752 1.7955 3.59101 7.18202 14.364 28.7281 57.4562 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.201 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 20.21 at -17.63 degrees (North through East) ! Clean map min=-0.0048656 max=0.20137 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2223-3455_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:47 2019