! Started logfile: J2223-3455_S_2017_08_05_pus_uvs.log on Thu May 9 19:40:42 2019 obs J2223-3455_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2223-3455_S_2017_08_05_pus_uva.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2223-3455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2223-3455_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.786963Jy sigma=0.005279 ! Fit after self-cal, rms=0.716498Jy sigma=0.004790 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=24.26 mas, bpa=16.03 degrees ! Estimated noise=9083.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233581 Jy ! Component: 100 - total flux cleaned = 0.288318 Jy ! Total flux subtracted in 100 components = 0.288318 Jy ! Clean residual min=-0.031392 max=0.039412 Jy/beam ! Clean residual mean=-0.000033 rms=0.009617 Jy/beam ! Combined flux in latest and established models = 0.288318 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.288318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125069Jy sigma=0.000797 ! Fit after self-cal, rms=0.125066Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=24.95 mas, bpa=15.04 degrees ! Estimated noise=8083.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240657 Jy ! Component: 100 - total flux cleaned = 0.0376254 Jy ! Component: 150 - total flux cleaned = 0.0427151 Jy ! Component: 200 - total flux cleaned = 0.0438484 Jy ! Total flux subtracted in 200 components = 0.0438484 Jy ! Clean residual min=-0.027473 max=0.036586 Jy/beam ! Clean residual mean=-0.000035 rms=0.009433 Jy/beam ! Combined flux in latest and established models = 0.332167 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.332167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120745Jy sigma=0.000758 ! Fit after self-cal, rms=0.120781Jy sigma=0.000757 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.00* KP 1.11 ! LA 1.22 MK 1.00* NL 1.00* OV 1.00 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.07 ! LA 1.14 MK 1.00* NL 0.81 OV 0.93 ! PT 0.89 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.93 ! LA 1.21 MK 1.00* NL 1.11 OV 0.96 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.120781Jy sigma=0.000757 ! Fit after self-cal, rms=0.118384Jy sigma=0.000710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=24.62 mas, bpa=14.9 degrees ! Estimated noise=8002.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382223 Jy ! Component: 100 - total flux cleaned = 0.00418703 Jy ! Component: 150 - total flux cleaned = 0.00434988 Jy ! Component: 200 - total flux cleaned = 0.0044966 Jy ! Total flux subtracted in 200 components = 0.0044966 Jy ! Clean residual min=-0.022532 max=0.029108 Jy/beam ! Clean residual mean=-0.000015 rms=0.007514 Jy/beam ! Combined flux in latest and established models = 0.336663 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.336663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117987Jy sigma=0.000705 ! Fit after self-cal, rms=0.118296Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118296Jy sigma=0.000705 ! Fit after self-cal, rms=0.118124Jy sigma=0.000705 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=24.48 mas, bpa=14.88 degrees ! Estimated noise=8004.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257117 Jy ! Component: 100 - total flux cleaned = 0.00308817 Jy ! Component: 150 - total flux cleaned = 0.00320415 Jy ! Component: 200 - total flux cleaned = 0.0033126 Jy ! Total flux subtracted in 200 components = 0.0033126 Jy ! Clean residual min=-0.022295 max=0.028051 Jy/beam ! Clean residual mean=-0.000013 rms=0.007427 Jy/beam ! Combined flux in latest and established models = 0.339976 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.339976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117894Jy sigma=0.000703 ! Fit after self-cal, rms=0.117954Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.74582e-05 Jy ! Component: 100 - total flux cleaned = 0.000114115 Jy ! Component: 150 - total flux cleaned = 0.000211325 Jy ! Component: 200 - total flux cleaned = 0.000309677 Jy ! Total flux subtracted in 200 components = 0.000309677 Jy ! Clean residual min=-0.022286 max=0.027890 Jy/beam ! Clean residual mean=-0.000013 rms=0.007383 Jy/beam ! Combined flux in latest and established models = 0.340286 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 68 components and 0.340286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117763Jy sigma=0.000701 ! Fit after self-cal, rms=0.117832Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117832Jy sigma=0.000701 ! Fit after self-cal, rms=0.117604Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=24.37 mas, bpa=14.85 degrees ! Estimated noise=8005.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174625 Jy ! Component: 100 - total flux cleaned = 0.0019563 Jy ! Component: 150 - total flux cleaned = 0.00224636 Jy ! Component: 200 - total flux cleaned = 0.00243261 Jy ! Total flux subtracted in 200 components = 0.00243261 Jy ! Clean residual min=-0.021952 max=0.027394 Jy/beam ! Clean residual mean=-0.000007 rms=0.007312 Jy/beam ! Combined flux in latest and established models = 0.342718 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 82 components and 0.342718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117434Jy sigma=0.000700 ! Fit after self-cal, rms=0.117492Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37573e-05 Jy ! Component: 100 - total flux cleaned = 0.000191539 Jy ! Component: 150 - total flux cleaned = 0.000450554 Jy ! Component: 200 - total flux cleaned = 0.000697588 Jy ! Total flux subtracted in 200 components = 0.000697588 Jy ! Clean residual min=-0.021888 max=0.027244 Jy/beam ! Clean residual mean=-0.000007 rms=0.007276 Jy/beam ! Combined flux in latest and established models = 0.343416 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.343416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117334Jy sigma=0.000699 ! Fit after self-cal, rms=0.117403Jy sigma=0.000699 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117403Jy sigma=0.000699 ! Fit after self-cal, rms=0.117210Jy sigma=0.000698 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.283 mas, bmaj=34.44 mas, bpa=1.224 degrees ! Estimated noise=9477.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306635 Jy ! Component: 100 - total flux cleaned = 0.00352721 Jy ! Component: 150 - total flux cleaned = 0.00386178 Jy ! Component: 200 - total flux cleaned = 0.00417731 Jy ! Total flux subtracted in 200 components = 0.00417731 Jy ! Clean residual min=-0.025899 max=0.035482 Jy/beam ! Clean residual mean=-0.000001 rms=0.010131 Jy/beam ! Combined flux in latest and established models = 0.347593 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.347593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117091Jy sigma=0.000698 ! Fit after self-cal, rms=0.117164Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305707 Jy ! Component: 100 - total flux cleaned = 0.000534579 Jy ! Component: 150 - total flux cleaned = 0.000753021 Jy ! Component: 200 - total flux cleaned = 0.000965636 Jy ! Total flux subtracted in 200 components = 0.000965636 Jy ! Clean residual min=-0.025869 max=0.035376 Jy/beam ! Clean residual mean=0.000001 rms=0.010103 Jy/beam ! Combined flux in latest and established models = 0.348559 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 110 components and 0.348559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117033Jy sigma=0.000697 ! Fit after self-cal, rms=0.117094Jy sigma=0.000697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=24.27 mas, bpa=14.82 degrees ! Estimated noise=8007.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 24.27 at 14.82 degrees (North through East) ! Clean map min=-0.021718 max=0.27422 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=23.61 mas, bpa=15.86 degrees ! Estimated noise=8991.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23128 Jy ! Component: 100 - total flux cleaned = 0.289146 Jy ! Component: 150 - total flux cleaned = 0.312687 Jy ! Component: 200 - total flux cleaned = 0.326596 Jy ! Total flux subtracted in 200 components = 0.326596 Jy ! Clean residual min=-0.022489 max=0.029218 Jy/beam ! Clean residual mean=-0.000048 rms=0.006969 Jy/beam ! Combined flux in latest and established models = 0.326597 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.326597 Jy ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=24.27 mas, bpa=14.82 degrees ! Estimated noise=8007.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794606 Jy ! Component: 100 - total flux cleaned = 0.0111084 Jy ! Component: 150 - total flux cleaned = 0.011794 Jy ! Component: 200 - total flux cleaned = 0.0122519 Jy ! Total flux subtracted in 200 components = 0.0122519 Jy ! Clean residual min=-0.022494 max=0.028201 Jy/beam ! Clean residual mean=-0.000008 rms=0.007539 Jy/beam ! Combined flux in latest and established models = 0.338849 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 49 components and 0.338849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.283 mas, bmaj=34.44 mas, bpa=1.224 degrees ! Estimated noise=9477.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038544 Jy ! Component: 100 - total flux cleaned = 0.00459485 Jy ! Component: 150 - total flux cleaned = 0.00507858 Jy ! Component: 200 - total flux cleaned = 0.00530384 Jy ! Total flux subtracted in 200 components = 0.00530384 Jy ! Clean residual min=-0.025794 max=0.036486 Jy/beam ! Clean residual mean=-0.000009 rms=0.010287 Jy/beam ! Combined flux in latest and established models = 0.344152 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219668 Jy ! Component: 100 - total flux cleaned = 0.000435417 Jy ! Component: 150 - total flux cleaned = 0.000638524 Jy ! Component: 200 - total flux cleaned = 0.000941349 Jy ! Total flux subtracted in 200 components = 0.000941349 Jy ! Clean residual min=-0.025560 max=0.036233 Jy/beam ! Clean residual mean=-0.000007 rms=0.010241 Jy/beam ! Combined flux in latest and established models = 0.345094 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.345094 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=24.27 mas, bpa=14.82 degrees ! Estimated noise=8007.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579833 Jy ! Component: 100 - total flux cleaned = -0.000438745 Jy ! Component: 150 - total flux cleaned = -0.000312998 Jy ! Component: 200 - total flux cleaned = -0.000197427 Jy ! Total flux subtracted in 200 components = -0.000197427 Jy ! Clean residual min=-0.022565 max=0.027884 Jy/beam ! Clean residual mean=-0.000006 rms=0.007358 Jy/beam ! Combined flux in latest and established models = 0.344896 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.344896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117378Jy sigma=0.000701 ! Fit after self-cal, rms=0.117464Jy sigma=0.000701 wmodel J2223-3455_S_2017_08_05_pus_map.mod ! Writing 78 model components to file: J2223-3455_S_2017_08_05_pus_map.mod wobs J2223-3455_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2223-3455_S_2017_08_05_pus_uvs.fits wwins J2223-3455_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J2223-3455_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111633 Jy ! Component: 100 - total flux cleaned = 0.0154106 Jy ! Component: 150 - total flux cleaned = 0.0174009 Jy ! Component: 200 - total flux cleaned = 0.0188473 Jy ! Component: 250 - total flux cleaned = 0.0191139 Jy ! Component: 300 - total flux cleaned = 0.0198162 Jy ! Component: 350 - total flux cleaned = 0.0200356 Jy ! Component: 400 - total flux cleaned = 0.0206369 Jy ! Component: 450 - total flux cleaned = 0.021382 Jy ! Component: 500 - total flux cleaned = 0.0219239 Jy ! Component: 550 - total flux cleaned = 0.022094 Jy ! Component: 600 - total flux cleaned = 0.0222494 Jy ! Component: 650 - total flux cleaned = 0.0220958 Jy ! Component: 700 - total flux cleaned = 0.0218066 Jy ! Component: 750 - total flux cleaned = 0.0213928 Jy ! Component: 800 - total flux cleaned = 0.0212626 Jy ! Component: 850 - total flux cleaned = 0.0210069 Jy ! Component: 900 - total flux cleaned = 0.0208845 Jy ! Component: 950 - total flux cleaned = 0.0206464 Jy ! Component: 1000 - total flux cleaned = 0.0208815 Jy ! Component: 1050 - total flux cleaned = 0.0207697 Jy ! Component: 1100 - total flux cleaned = 0.0207706 Jy ! Component: 1150 - total flux cleaned = 0.0209834 Jy ! Component: 1200 - total flux cleaned = 0.0211907 Jy ! Component: 1250 - total flux cleaned = 0.0215958 Jy ! Component: 1300 - total flux cleaned = 0.0219906 Jy ! Component: 1350 - total flux cleaned = 0.0221846 Jy ! Component: 1400 - total flux cleaned = 0.0222791 Jy ! Component: 1450 - total flux cleaned = 0.022185 Jy ! Component: 1500 - total flux cleaned = 0.0220939 Jy ! Component: 1550 - total flux cleaned = 0.0220936 Jy ! Component: 1600 - total flux cleaned = 0.0220941 Jy ! Component: 1650 - total flux cleaned = 0.022094 Jy ! Component: 1700 - total flux cleaned = 0.021916 Jy ! Component: 1750 - total flux cleaned = 0.0220924 Jy ! Component: 1800 - total flux cleaned = 0.0223567 Jy ! Component: 1850 - total flux cleaned = 0.0226208 Jy ! Component: 1900 - total flux cleaned = 0.0230628 Jy ! Component: 1950 - total flux cleaned = 0.0234197 Jy ! Component: 2000 - total flux cleaned = 0.0240496 Jy ! Component: 2050 - total flux cleaned = 0.0243227 Jy ! Component: 2100 - total flux cleaned = 0.0246906 Jy ! Component: 2150 - total flux cleaned = 0.0249686 Jy ! Component: 2200 - total flux cleaned = 0.0254391 Jy ! Component: 2250 - total flux cleaned = 0.0258184 Jy ! Component: 2300 - total flux cleaned = 0.0262985 Jy ! Component: 2350 - total flux cleaned = 0.0265901 Jy ! Component: 2400 - total flux cleaned = 0.0270818 Jy ! Component: 2450 - total flux cleaned = 0.0274794 Jy ! Component: 2500 - total flux cleaned = 0.0278833 Jy ! Component: 2550 - total flux cleaned = 0.0280856 Jy ! Component: 2600 - total flux cleaned = 0.0285013 Jy ! Component: 2650 - total flux cleaned = 0.028818 Jy ! Component: 2700 - total flux cleaned = 0.0291397 Jy ! Component: 2750 - total flux cleaned = 0.0294669 Jy ! Component: 2800 - total flux cleaned = 0.0297983 Jy ! Component: 2850 - total flux cleaned = 0.0301366 Jy ! Component: 2900 - total flux cleaned = 0.0304806 Jy ! Component: 2950 - total flux cleaned = 0.0308304 Jy ! Component: 3000 - total flux cleaned = 0.0310671 Jy ! Component: 3050 - total flux cleaned = 0.031307 Jy ! Component: 3100 - total flux cleaned = 0.0316766 Jy ! Component: 3150 - total flux cleaned = 0.0319251 Jy ! Component: 3200 - total flux cleaned = 0.0323059 Jy ! Component: 3250 - total flux cleaned = 0.0325636 Jy ! Component: 3300 - total flux cleaned = 0.0329607 Jy ! Component: 3350 - total flux cleaned = 0.0330959 Jy ! Component: 3400 - total flux cleaned = 0.033508 Jy ! Component: 3450 - total flux cleaned = 0.033788 Jy ! Component: 3500 - total flux cleaned = 0.0339297 Jy ! Component: 3550 - total flux cleaned = 0.034075 Jy ! Component: 3600 - total flux cleaned = 0.0342237 Jy ! Component: 3650 - total flux cleaned = 0.0343759 Jy ! Component: 3700 - total flux cleaned = 0.0345324 Jy ! Component: 3750 - total flux cleaned = 0.034692 Jy ! Component: 3800 - total flux cleaned = 0.0350163 Jy ! Component: 3850 - total flux cleaned = 0.0351816 Jy ! Component: 3900 - total flux cleaned = 0.035522 Jy ! Component: 3950 - total flux cleaned = 0.0358706 Jy ! Component: 4000 - total flux cleaned = 0.0360488 Jy ! Component: 4050 - total flux cleaned = 0.0364138 Jy ! Total flux subtracted in 4096 components = 0.03679 Jy ! Clean residual min=-0.009838 max=0.009840 Jy/beam ! Clean residual mean=0.000020 rms=0.003191 Jy/beam ! Combined flux in latest and established models = 0.381686 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 354 components and 0.381686 Jy ![Exited script file: muppet] wmap "J2223-3455_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 24.27 at 14.82 degrees (North through East) ! Clean map min=-0.016483 max=0.28602 Jy/beam ! Writing clean map to FITS file: J2223-3455_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.286025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00350729 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.67866 3.67866 7.35732 14.7146 29.4293 58.8585 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0105 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.286 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 24.27 at 14.82 degrees (North through East) ! Clean map min=-0.016483 max=0.28602 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2223-3455_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:40:47 2019