! Started logfile: J2223-3455_S_2017_07_09_pus_uvs.log on Wed May 8 14:59:02 2019 obs J2223-3455_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2223-3455_S_2017_07_09_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.525926 visibilities/baseline/integration-bin. ! Found source: J2223-3455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2223-3455_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.734127Jy sigma=0.005258 ! Fit after self-cal, rms=0.724596Jy sigma=0.005198 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=8.119 mas, bpa=-5.627 degrees ! Estimated noise=3812.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215859 Jy ! Component: 100 - total flux cleaned = 0.2671 Jy ! Total flux subtracted in 100 components = 0.2671 Jy ! Clean residual min=-0.021439 max=0.034542 Jy/beam ! Clean residual mean=-0.000142 rms=0.006580 Jy/beam ! Combined flux in latest and established models = 0.2671 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.2671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121876Jy sigma=0.000855 ! Fit after self-cal, rms=0.121867Jy sigma=0.000854 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=8.502 mas, bpa=-5.949 degrees ! Estimated noise=2951.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272989 Jy ! Component: 100 - total flux cleaned = 0.0368132 Jy ! Component: 150 - total flux cleaned = 0.0387519 Jy ! Component: 200 - total flux cleaned = 0.0388598 Jy ! Total flux subtracted in 200 components = 0.0388598 Jy ! Clean residual min=-0.018472 max=0.039092 Jy/beam ! Clean residual mean=0.000053 rms=0.007890 Jy/beam ! Combined flux in latest and established models = 0.30596 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.30596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117121Jy sigma=0.000814 ! Fit after self-cal, rms=0.117113Jy sigma=0.000814 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.98 ! LA 1.05 MK 1.00 NL 1.00* OV 0.97 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.97 ! LA 0.98 MK 0.97 NL 1.00* OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.94 ! LA 1.01 MK 1.04 NL 1.21 OV 0.90 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00* ! LA 1.45 MK 1.18 NL 1.00* OV 1.00* ! PT 0.82 SC 1.00* ! ! ! Fit before self-cal, rms=0.117113Jy sigma=0.000814 ! Fit after self-cal, rms=0.119831Jy sigma=0.000796 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=8.452 mas, bpa=-5.366 degrees ! Estimated noise=2962.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, 85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357728 Jy ! Component: 100 - total flux cleaned = 0.0536375 Jy ! Component: 150 - total flux cleaned = 0.0633274 Jy ! Component: 200 - total flux cleaned = 0.0695805 Jy ! Total flux subtracted in 200 components = 0.0695805 Jy ! Clean residual min=-0.013717 max=0.014147 Jy/beam ! Clean residual mean=-0.000082 rms=0.003784 Jy/beam ! Combined flux in latest and established models = 0.375541 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 79 components and 0.375541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109625Jy sigma=0.000711 ! Fit after self-cal, rms=0.109139Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109139Jy sigma=0.000704 ! Fit after self-cal, rms=0.104878Jy sigma=0.000684 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=8.475 mas, bpa=-5.376 degrees ! Estimated noise=2912.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111364 Jy ! Component: 100 - total flux cleaned = 0.0149965 Jy ! Component: 150 - total flux cleaned = 0.0154254 Jy ! Component: 200 - total flux cleaned = 0.0156655 Jy ! Total flux subtracted in 200 components = 0.0156655 Jy ! Clean residual min=-0.010493 max=0.009551 Jy/beam ! Clean residual mean=-0.000082 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.391206 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 0.391206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103663Jy sigma=0.000674 ! Fit after self-cal, rms=0.103522Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355965 Jy ! Component: 100 - total flux cleaned = 0.00366516 Jy ! Component: 150 - total flux cleaned = 0.00357619 Jy ! Component: 200 - total flux cleaned = 0.00357649 Jy ! Total flux subtracted in 200 components = 0.00357649 Jy ! Clean residual min=-0.009619 max=0.009356 Jy/beam ! Clean residual mean=-0.000083 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 0.394783 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 0.394783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103289Jy sigma=0.000671 ! Fit after self-cal, rms=0.103277Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103277Jy sigma=0.000671 ! Fit after self-cal, rms=0.103859Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=8.511 mas, bpa=-5.45 degrees ! Estimated noise=2911.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002766 Jy ! Component: 100 - total flux cleaned = 0.00237354 Jy ! Component: 150 - total flux cleaned = 0.00229637 Jy ! Component: 200 - total flux cleaned = 0.0022246 Jy ! Total flux subtracted in 200 components = 0.0022246 Jy ! Clean residual min=-0.009120 max=0.008288 Jy/beam ! Clean residual mean=-0.000075 rms=0.002228 Jy/beam ! Combined flux in latest and established models = 0.397007 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 0.397007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103627Jy sigma=0.000667 ! Fit after self-cal, rms=0.103618Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810464 Jy ! Component: 100 - total flux cleaned = 0.000942005 Jy ! Component: 150 - total flux cleaned = 0.00100183 Jy ! Component: 200 - total flux cleaned = 0.00112049 Jy ! Total flux subtracted in 200 components = 0.00112049 Jy ! Clean residual min=-0.008767 max=0.008320 Jy/beam ! Clean residual mean=-0.000077 rms=0.002185 Jy/beam ! Combined flux in latest and established models = 0.398128 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 0.398128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103526Jy sigma=0.000666 ! Fit after self-cal, rms=0.103527Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103527Jy sigma=0.000666 ! Fit after self-cal, rms=0.103582Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.03 mas, bmaj=29.41 mas, bpa=0.3011 degrees ! Estimated noise=3797.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00093274 Jy ! Component: 100 - total flux cleaned = 0.00117591 Jy ! Component: 150 - total flux cleaned = 0.00139997 Jy ! Component: 200 - total flux cleaned = 0.00146909 Jy ! Total flux subtracted in 200 components = 0.00146909 Jy ! Clean residual min=-0.009187 max=0.008223 Jy/beam ! Clean residual mean=-0.000165 rms=0.003172 Jy/beam ! Combined flux in latest and established models = 0.399597 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 145 components and 0.399597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103491Jy sigma=0.000666 ! Fit after self-cal, rms=0.103482Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449645 Jy ! Component: 100 - total flux cleaned = 0.000450316 Jy ! Component: 150 - total flux cleaned = 0.000451434 Jy ! Component: 200 - total flux cleaned = 0.00057161 Jy ! Total flux subtracted in 200 components = 0.00057161 Jy ! Clean residual min=-0.009043 max=0.008300 Jy/beam ! Clean residual mean=-0.000166 rms=0.003126 Jy/beam ! Combined flux in latest and established models = 0.400168 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 147 components and 0.400168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103462Jy sigma=0.000666 ! Fit after self-cal, rms=0.103451Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=8.539 mas, bpa=-5.508 degrees ! Estimated noise=2913.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.924 x 8.539 at -5.508 degrees (North through East) ! Clean map min=-0.007863 max=0.28094 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.545 mas, bmaj=8.044 mas, bpa=-5.414 degrees ! Estimated noise=3905.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216808 Jy ! Component: 100 - total flux cleaned = 0.274089 Jy ! Component: 150 - total flux cleaned = 0.30771 Jy ! Component: 200 - total flux cleaned = 0.331424 Jy ! Total flux subtracted in 200 components = 0.331424 Jy ! Clean residual min=-0.015773 max=0.015825 Jy/beam ! Clean residual mean=-0.000108 rms=0.003950 Jy/beam ! Combined flux in latest and established models = 0.331424 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.331424 Jy ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=8.539 mas, bpa=-5.508 degrees ! Estimated noise=2913.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205381 Jy ! Component: 100 - total flux cleaned = 0.0346187 Jy ! Component: 150 - total flux cleaned = 0.0446511 Jy ! Component: 200 - total flux cleaned = 0.0518753 Jy ! Total flux subtracted in 200 components = 0.0518753 Jy ! Clean residual min=-0.009992 max=0.008947 Jy/beam ! Clean residual mean=-0.000078 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.383299 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 81 components and 0.3833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.03 mas, bmaj=29.41 mas, bpa=0.3011 degrees ! Estimated noise=3797.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823275 Jy ! Component: 100 - total flux cleaned = 0.0129644 Jy ! Component: 150 - total flux cleaned = 0.0145005 Jy ! Component: 200 - total flux cleaned = 0.014816 Jy ! Total flux subtracted in 200 components = 0.014816 Jy ! Clean residual min=-0.009546 max=0.009381 Jy/beam ! Clean residual mean=-0.000151 rms=0.003321 Jy/beam ! Combined flux in latest and established models = 0.398116 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291436 Jy ! Component: 100 - total flux cleaned = 0.000558401 Jy ! Component: 150 - total flux cleaned = 0.000805858 Jy ! Component: 200 - total flux cleaned = 0.00110572 Jy ! Total flux subtracted in 200 components = 0.00110572 Jy ! Clean residual min=-0.009257 max=0.008816 Jy/beam ! Clean residual mean=-0.000152 rms=0.003234 Jy/beam ! Combined flux in latest and established models = 0.399221 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.399221 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=8.539 mas, bpa=-5.508 degrees ! Estimated noise=2913.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426169 Jy ! Component: 100 - total flux cleaned = 0.000436233 Jy ! Component: 150 - total flux cleaned = 0.000337059 Jy ! Component: 200 - total flux cleaned = 0.000247536 Jy ! Total flux subtracted in 200 components = 0.000247536 Jy ! Clean residual min=-0.008937 max=0.008781 Jy/beam ! Clean residual mean=-0.000076 rms=0.002210 Jy/beam ! Combined flux in latest and established models = 0.399469 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.399469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103574Jy sigma=0.000667 ! Fit after self-cal, rms=0.103466Jy sigma=0.000666 wmodel J2223-3455_S_2017_07_09_pus_map.mod ! Writing 113 model components to file: J2223-3455_S_2017_07_09_pus_map.mod wobs J2223-3455_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2223-3455_S_2017_07_09_pus_uvs.fits wwins J2223-3455_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J2223-3455_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210689 Jy ! Component: 100 - total flux cleaned = -0.00238346 Jy ! Component: 150 - total flux cleaned = -0.00190385 Jy ! Component: 200 - total flux cleaned = -0.00134531 Jy ! Component: 250 - total flux cleaned = -0.00103725 Jy ! Component: 300 - total flux cleaned = -0.00103527 Jy ! Component: 350 - total flux cleaned = -0.00103013 Jy ! Component: 400 - total flux cleaned = -0.00137933 Jy ! Component: 450 - total flux cleaned = -0.00179964 Jy ! Component: 500 - total flux cleaned = -0.00236427 Jy ! Component: 550 - total flux cleaned = -0.00275084 Jy ! Component: 600 - total flux cleaned = -0.00319385 Jy ! Component: 650 - total flux cleaned = -0.00340831 Jy ! Component: 700 - total flux cleaned = -0.00423902 Jy ! Component: 750 - total flux cleaned = -0.0049758 Jy ! Component: 800 - total flux cleaned = -0.00575981 Jy ! Component: 850 - total flux cleaned = -0.00645927 Jy ! Component: 900 - total flux cleaned = -0.00739057 Jy ! Component: 950 - total flux cleaned = -0.0080566 Jy ! Component: 1000 - total flux cleaned = -0.00876476 Jy ! Component: 1050 - total flux cleaned = -0.00934008 Jy ! Component: 1100 - total flux cleaned = -0.0100128 Jy ! Component: 1150 - total flux cleaned = -0.0106704 Jy ! Component: 1200 - total flux cleaned = -0.0113119 Jy ! Component: 1250 - total flux cleaned = -0.0118865 Jy ! Component: 1300 - total flux cleaned = -0.0123976 Jy ! Component: 1350 - total flux cleaned = -0.0127475 Jy ! Component: 1400 - total flux cleaned = -0.0132897 Jy ! Component: 1450 - total flux cleaned = -0.013773 Jy ! Component: 1500 - total flux cleaned = -0.014248 Jy ! Component: 1550 - total flux cleaned = -0.0146675 Jy ! Component: 1600 - total flux cleaned = -0.0150806 Jy ! Component: 1650 - total flux cleaned = -0.0153511 Jy ! Component: 1700 - total flux cleaned = -0.0156622 Jy ! Component: 1750 - total flux cleaned = -0.016012 Jy ! Component: 1800 - total flux cleaned = -0.0163133 Jy ! Component: 1850 - total flux cleaned = -0.0165672 Jy ! Component: 1900 - total flux cleaned = -0.0169848 Jy ! Component: 1950 - total flux cleaned = -0.0171501 Jy ! Component: 2000 - total flux cleaned = -0.0174341 Jy ! Component: 2050 - total flux cleaned = -0.0176746 Jy ! Component: 2100 - total flux cleaned = -0.0180302 Jy ! Component: 2150 - total flux cleaned = -0.0182249 Jy ! Component: 2200 - total flux cleaned = -0.0184554 Jy ! Component: 2250 - total flux cleaned = -0.0186456 Jy ! Component: 2300 - total flux cleaned = -0.018871 Jy ! Component: 2350 - total flux cleaned = -0.0190562 Jy ! Component: 2400 - total flux cleaned = -0.0193126 Jy ! Component: 2450 - total flux cleaned = -0.0194938 Jy ! Component: 2500 - total flux cleaned = -0.0197088 Jy ! Component: 2550 - total flux cleaned = -0.0199215 Jy ! Component: 2600 - total flux cleaned = -0.0203076 Jy ! Component: 2650 - total flux cleaned = -0.0205504 Jy ! Component: 2700 - total flux cleaned = -0.0207219 Jy ! Component: 2750 - total flux cleaned = -0.0208582 Jy ! Component: 2800 - total flux cleaned = -0.0209935 Jy ! Component: 2850 - total flux cleaned = -0.0211941 Jy ! Component: 2900 - total flux cleaned = -0.0214262 Jy ! Component: 2950 - total flux cleaned = -0.0215249 Jy ! Component: 3000 - total flux cleaned = -0.0215901 Jy ! Component: 3050 - total flux cleaned = -0.0216545 Jy ! Component: 3100 - total flux cleaned = -0.0217187 Jy ! Component: 3150 - total flux cleaned = -0.0218783 Jy ! Component: 3200 - total flux cleaned = -0.0218784 Jy ! Component: 3250 - total flux cleaned = -0.022036 Jy ! Component: 3300 - total flux cleaned = -0.0220989 Jy ! Component: 3350 - total flux cleaned = -0.0222235 Jy ! Component: 3400 - total flux cleaned = -0.0222856 Jy ! Component: 3450 - total flux cleaned = -0.022409 Jy ! Component: 3500 - total flux cleaned = -0.0224702 Jy ! Component: 3550 - total flux cleaned = -0.0225313 Jy ! Component: 3600 - total flux cleaned = -0.0226225 Jy ! Component: 3650 - total flux cleaned = -0.0226226 Jy ! Component: 3700 - total flux cleaned = -0.0227132 Jy ! Component: 3750 - total flux cleaned = -0.0227434 Jy ! Component: 3800 - total flux cleaned = -0.0228633 Jy ! Component: 3850 - total flux cleaned = -0.0228931 Jy ! Component: 3900 - total flux cleaned = -0.0229228 Jy ! Component: 3950 - total flux cleaned = -0.0230117 Jy ! Component: 4000 - total flux cleaned = -0.0230118 Jy ! Component: 4050 - total flux cleaned = -0.0231001 Jy ! Total flux subtracted in 4096 components = -0.0231293 Jy ! Clean residual min=-0.001670 max=0.001727 Jy/beam ! Clean residual mean=-0.000029 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.37634 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 405 components and 0.376339 Jy ![Exited script file: muppet] wmap "J2223-3455_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.924 x 8.539 at -5.508 degrees (North through East) ! Clean map min=-0.0041208 max=0.27721 Jy/beam ! Writing clean map to FITS file: J2223-3455_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.277214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000542456 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.587045 0.587045 1.17409 2.34818 4.69636 9.39272 18.7854 37.5709 75.1417 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.277 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.924 x 8.539 at -5.508 degrees (North through East) ! Clean map min=-0.0041208 max=0.27721 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2223-3455_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:59:06 2019