! Started logfile: J2223-3455_S_2017_01_21_pus_uvs.log on Sun May 5 16:05:20 2019 obs J2223-3455_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2223-3455_S_2017_01_21_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.402778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2223-3455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2223-3455_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.757323Jy sigma=0.004164 ! Fit after self-cal, rms=0.745358Jy sigma=0.004097 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.05 mas, bmaj=5.949 mas, bpa=0.6442 degrees ! Estimated noise=5120.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203337 Jy ! Component: 100 - total flux cleaned = 0.249255 Jy ! Total flux subtracted in 100 components = 0.249255 Jy ! Clean residual min=-0.021487 max=0.021392 Jy/beam ! Clean residual mean=-0.000145 rms=0.005498 Jy/beam ! Combined flux in latest and established models = 0.249255 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.249255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140837Jy sigma=0.000687 ! Fit after self-cal, rms=0.140950Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=6.566 mas, bpa=1.924 degrees ! Estimated noise=4443.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020688 Jy ! Component: 100 - total flux cleaned = 0.0253803 Jy ! Component: 150 - total flux cleaned = 0.0264366 Jy ! Component: 200 - total flux cleaned = 0.0273511 Jy ! Total flux subtracted in 200 components = 0.0273511 Jy ! Clean residual min=-0.018373 max=0.026707 Jy/beam ! Clean residual mean=0.000113 rms=0.006296 Jy/beam ! Combined flux in latest and established models = 0.276606 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.276606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137778Jy sigma=0.000672 ! Fit after self-cal, rms=0.137869Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00* LA 1.02 ! MK 0.98 NL 1.00* OV 1.00* PT 1.10 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00* LA 0.93 ! MK 1.00 NL 1.13 OV 1.00* PT 1.08 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00* LA 0.92 ! MK 1.02 NL 1.05 OV 1.00* PT 1.03 ! SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* LA 0.72 ! MK 0.96 NL 1.00* OV 1.00* PT 1.19 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.137869Jy sigma=0.000672 ! Fit after self-cal, rms=0.132692Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.52 mas, bpa=2.144 degrees ! Estimated noise=4430.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111835 Jy ! Component: 100 - total flux cleaned = 0.00138538 Jy ! Component: 150 - total flux cleaned = 0.0016249 Jy ! Component: 200 - total flux cleaned = 0.00176744 Jy ! Total flux subtracted in 200 components = 0.00176744 Jy ! Clean residual min=-0.018679 max=0.023126 Jy/beam ! Clean residual mean=0.000162 rms=0.005275 Jy/beam ! Combined flux in latest and established models = 0.278374 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.278374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132582Jy sigma=0.000656 ! Fit after self-cal, rms=0.132562Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132562Jy sigma=0.000655 ! Fit after self-cal, rms=0.133388Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=6.514 mas, bpa=2.169 degrees ! Estimated noise=4451.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211997 Jy ! Component: 100 - total flux cleaned = 0.00232427 Jy ! Component: 150 - total flux cleaned = 0.00232215 Jy ! Component: 200 - total flux cleaned = 0.0023206 Jy ! Total flux subtracted in 200 components = 0.0023206 Jy ! Clean residual min=-0.018511 max=0.023192 Jy/beam ! Clean residual mean=0.000169 rms=0.005300 Jy/beam ! Combined flux in latest and established models = 0.280694 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.280694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133316Jy sigma=0.000655 ! Fit after self-cal, rms=0.133322Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.5, 102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217822 Jy ! Component: 100 - total flux cleaned = 0.0307927 Jy ! Component: 150 - total flux cleaned = 0.036337 Jy ! Component: 200 - total flux cleaned = 0.0404109 Jy ! Total flux subtracted in 200 components = 0.0404109 Jy ! Clean residual min=-0.012722 max=0.013399 Jy/beam ! Clean residual mean=-0.000088 rms=0.002941 Jy/beam ! Combined flux in latest and established models = 0.321105 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.321105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130132Jy sigma=0.000635 ! Fit after self-cal, rms=0.129851Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129851Jy sigma=0.000633 ! Fit after self-cal, rms=0.129236Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=6.506 mas, bpa=2.376 degrees ! Estimated noise=4410.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667727 Jy ! Component: 100 - total flux cleaned = 0.0101048 Jy ! Component: 150 - total flux cleaned = 0.0112701 Jy ! Component: 200 - total flux cleaned = 0.0124168 Jy ! Total flux subtracted in 200 components = 0.0124168 Jy ! Clean residual min=-0.010607 max=0.009837 Jy/beam ! Clean residual mean=-0.000009 rms=0.002312 Jy/beam ! Combined flux in latest and established models = 0.333522 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.333522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128847Jy sigma=0.000623 ! Fit after self-cal, rms=0.128881Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292581 Jy ! Component: 100 - total flux cleaned = 0.00396468 Jy ! Component: 150 - total flux cleaned = 0.00449719 Jy ! Component: 200 - total flux cleaned = 0.00491908 Jy ! Total flux subtracted in 200 components = 0.00491908 Jy ! Clean residual min=-0.010247 max=0.009691 Jy/beam ! Clean residual mean=-0.000018 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.338441 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.338441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128770Jy sigma=0.000623 ! Fit after self-cal, rms=0.128757Jy sigma=0.000622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128757Jy sigma=0.000622 ! Fit after self-cal, rms=0.129230Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.618 mas, bmaj=20.82 mas, bpa=9.608 degrees ! Estimated noise=6801.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459837 Jy ! Component: 100 - total flux cleaned = 0.00532308 Jy ! Component: 150 - total flux cleaned = 0.00538726 Jy ! Component: 200 - total flux cleaned = 0.00550373 Jy ! Total flux subtracted in 200 components = 0.00550373 Jy ! Clean residual min=-0.008367 max=0.010224 Jy/beam ! Clean residual mean=0.000051 rms=0.003100 Jy/beam ! Combined flux in latest and established models = 0.343945 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 81 components and 0.343945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129162Jy sigma=0.000622 ! Fit after self-cal, rms=0.129203Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186704 Jy ! Component: 100 - total flux cleaned = 0.00192728 Jy ! Component: 150 - total flux cleaned = 0.00193048 Jy ! Component: 200 - total flux cleaned = 0.00183152 Jy ! Total flux subtracted in 200 components = 0.00183152 Jy ! Clean residual min=-0.008905 max=0.010375 Jy/beam ! Clean residual mean=0.000047 rms=0.003109 Jy/beam ! Combined flux in latest and established models = 0.345776 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.345776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129200Jy sigma=0.000622 ! Fit after self-cal, rms=0.129205Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=6.507 mas, bpa=2.399 degrees ! Estimated noise=4395.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.384 x 6.507 at 2.399 degrees (North through East) ! Clean map min=-0.0080982 max=0.26731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.03 mas, bmaj=5.908 mas, bpa=1.087 degrees ! Estimated noise=5060.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200786 Jy ! Component: 100 - total flux cleaned = 0.246351 Jy ! Component: 150 - total flux cleaned = 0.268105 Jy ! Component: 200 - total flux cleaned = 0.284289 Jy ! Total flux subtracted in 200 components = 0.284289 Jy ! Clean residual min=-0.014891 max=0.011877 Jy/beam ! Clean residual mean=-0.000021 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 0.284289 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.284289 Jy ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=6.507 mas, bpa=2.399 degrees ! Estimated noise=4395.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166402 Jy ! Component: 100 - total flux cleaned = 0.0286235 Jy ! Component: 150 - total flux cleaned = 0.0376957 Jy ! Component: 200 - total flux cleaned = 0.0446037 Jy ! Total flux subtracted in 200 components = 0.0446037 Jy ! Clean residual min=-0.010941 max=0.009556 Jy/beam ! Clean residual mean=-0.000033 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 0.328892 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.328892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.618 mas, bmaj=20.82 mas, bpa=9.608 degrees ! Estimated noise=6801.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100095 Jy ! Component: 100 - total flux cleaned = 0.0152339 Jy ! Component: 150 - total flux cleaned = 0.0181231 Jy ! Component: 200 - total flux cleaned = 0.0183702 Jy ! Total flux subtracted in 200 components = 0.0183702 Jy ! Clean residual min=-0.009189 max=0.010138 Jy/beam ! Clean residual mean=0.000031 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.347263 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014116 Jy ! Component: 100 - total flux cleaned = 0.000202385 Jy ! Component: 150 - total flux cleaned = 0.000261298 Jy ! Component: 200 - total flux cleaned = 0.000367493 Jy ! Total flux subtracted in 200 components = 0.000367493 Jy ! Clean residual min=-0.008807 max=0.010246 Jy/beam ! Clean residual mean=0.000046 rms=0.003104 Jy/beam ! Combined flux in latest and established models = 0.34763 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.34763 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=6.507 mas, bpa=2.399 degrees ! Estimated noise=4395.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237708 Jy ! Component: 100 - total flux cleaned = -0.00268051 Jy ! Component: 150 - total flux cleaned = -0.00257288 Jy ! Component: 200 - total flux cleaned = -0.00238877 Jy ! Total flux subtracted in 200 components = -0.00238877 Jy ! Clean residual min=-0.008720 max=0.010120 Jy/beam ! Clean residual mean=0.000008 rms=0.002196 Jy/beam ! Combined flux in latest and established models = 0.345241 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.345241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129140Jy sigma=0.000622 ! Fit after self-cal, rms=0.129118Jy sigma=0.000622 wmodel J2223-3455_S_2017_01_21_pus_map.mod ! Writing 74 model components to file: J2223-3455_S_2017_01_21_pus_map.mod wobs J2223-3455_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2223-3455_S_2017_01_21_pus_uvs.fits wwins J2223-3455_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J2223-3455_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947974 Jy ! Component: 100 - total flux cleaned = 0.00107332 Jy ! Component: 150 - total flux cleaned = 0.00208581 Jy ! Component: 200 - total flux cleaned = 0.00292341 Jy ! Component: 250 - total flux cleaned = 0.00371371 Jy ! Component: 300 - total flux cleaned = 0.00392261 Jy ! Component: 350 - total flux cleaned = 0.00443099 Jy ! Component: 400 - total flux cleaned = 0.00501853 Jy ! Component: 450 - total flux cleaned = 0.00576754 Jy ! Component: 500 - total flux cleaned = 0.00657972 Jy ! Component: 550 - total flux cleaned = 0.00710436 Jy ! Component: 600 - total flux cleaned = 0.00777623 Jy ! Component: 650 - total flux cleaned = 0.00818445 Jy ! Component: 700 - total flux cleaned = 0.00857961 Jy ! Component: 750 - total flux cleaned = 0.0090405 Jy ! Component: 800 - total flux cleaned = 0.00941349 Jy ! Component: 850 - total flux cleaned = 0.00970419 Jy ! Component: 900 - total flux cleaned = 0.0101293 Jy ! Component: 950 - total flux cleaned = 0.0107544 Jy ! Component: 1000 - total flux cleaned = 0.0110956 Jy ! Component: 1050 - total flux cleaned = 0.0114291 Jy ! Component: 1100 - total flux cleaned = 0.0116924 Jy ! Component: 1150 - total flux cleaned = 0.0120797 Jy ! Component: 1200 - total flux cleaned = 0.012396 Jy ! Component: 1250 - total flux cleaned = 0.0126454 Jy ! Component: 1300 - total flux cleaned = 0.0130758 Jy ! Component: 1350 - total flux cleaned = 0.013439 Jy ! Component: 1400 - total flux cleaned = 0.0137968 Jy ! Component: 1450 - total flux cleaned = 0.0142094 Jy ! Component: 1500 - total flux cleaned = 0.0147326 Jy ! Component: 1550 - total flux cleaned = 0.0151352 Jy ! Component: 1600 - total flux cleaned = 0.0155897 Jy ! Component: 1650 - total flux cleaned = 0.0160956 Jy ! Component: 1700 - total flux cleaned = 0.0165413 Jy ! Component: 1750 - total flux cleaned = 0.0170924 Jy ! Component: 1800 - total flux cleaned = 0.0175289 Jy ! Component: 1850 - total flux cleaned = 0.0181245 Jy ! Component: 1900 - total flux cleaned = 0.0186089 Jy ! Component: 1950 - total flux cleaned = 0.0190371 Jy ! Component: 2000 - total flux cleaned = 0.0193569 Jy ! Component: 2050 - total flux cleaned = 0.0195163 Jy ! Component: 2100 - total flux cleaned = 0.0197816 Jy ! Component: 2150 - total flux cleaned = 0.0198872 Jy ! Component: 2200 - total flux cleaned = 0.0200984 Jy ! Component: 2250 - total flux cleaned = 0.0199399 Jy ! Component: 2300 - total flux cleaned = 0.0198865 Jy ! Component: 2350 - total flux cleaned = 0.0198863 Jy ! Component: 2400 - total flux cleaned = 0.0199396 Jy ! Component: 2450 - total flux cleaned = 0.0199936 Jy ! Component: 2500 - total flux cleaned = 0.0200478 Jy ! Component: 2550 - total flux cleaned = 0.020103 Jy ! Component: 2600 - total flux cleaned = 0.0202156 Jy ! Component: 2650 - total flux cleaned = 0.0202727 Jy ! Component: 2700 - total flux cleaned = 0.020331 Jy ! Component: 2750 - total flux cleaned = 0.0203907 Jy ! Component: 2800 - total flux cleaned = 0.0204524 Jy ! Component: 2850 - total flux cleaned = 0.020577 Jy ! Component: 2900 - total flux cleaned = 0.0205764 Jy ! Component: 2950 - total flux cleaned = 0.0207072 Jy ! Component: 3000 - total flux cleaned = 0.0207743 Jy ! Component: 3050 - total flux cleaned = 0.0208426 Jy ! Component: 3100 - total flux cleaned = 0.0209835 Jy ! Component: 3150 - total flux cleaned = 0.0210563 Jy ! Component: 3200 - total flux cleaned = 0.0210566 Jy ! Component: 3250 - total flux cleaned = 0.021057 Jy ! Component: 3300 - total flux cleaned = 0.0209782 Jy ! Component: 3350 - total flux cleaned = 0.0209792 Jy ! Component: 3400 - total flux cleaned = 0.0208962 Jy ! Component: 3450 - total flux cleaned = 0.0208965 Jy ! Component: 3500 - total flux cleaned = 0.0208073 Jy ! Component: 3550 - total flux cleaned = 0.0208988 Jy ! Component: 3600 - total flux cleaned = 0.0208043 Jy ! Component: 3650 - total flux cleaned = 0.0208042 Jy ! Component: 3700 - total flux cleaned = 0.0208033 Jy ! Component: 3750 - total flux cleaned = 0.0208032 Jy ! Component: 3800 - total flux cleaned = 0.0208035 Jy ! Component: 3850 - total flux cleaned = 0.0208034 Jy ! Component: 3900 - total flux cleaned = 0.0208035 Jy ! Component: 3950 - total flux cleaned = 0.0208026 Jy ! Component: 4000 - total flux cleaned = 0.0208008 Jy ! Component: 4050 - total flux cleaned = 0.0208 Jy ! Total flux subtracted in 4096 components = 0.0207977 Jy ! Clean residual min=-0.007866 max=0.008068 Jy/beam ! Clean residual mean=0.000009 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.366039 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 300 components and 0.366039 Jy ![Exited script file: muppet] wmap "J2223-3455_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.384 x 6.507 at 2.399 degrees (North through East) ! Clean map min=-0.009565 max=0.26404 Jy/beam ! Writing clean map to FITS file: J2223-3455_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.264038 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00125358 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42431 1.42431 2.84863 5.69726 11.3945 22.789 45.5781 91.1562 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.384 x 6.507 at 2.399 degrees (North through East) ! Clean map min=-0.009565 max=0.26404 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2223-3455_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:05:25 2019