! Started logfile: J2222-3345_S_2017_09_26_pus_uvs.log on Sat May 11 13:07:48 2019 obs J2222-3345_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2222-3345_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.582105 visibilities/baseline/integration-bin. ! Found source: J2222-3345 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 24644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2222-3345_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 956 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 753 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1635 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008652Jy sigma=0.006226 ! Fit after self-cal, rms=0.939617Jy sigma=0.005812 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=10.84 mas, bpa=-23.51 degrees ! Estimated noise=1958.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050624 Jy ! Component: 100 - total flux cleaned = 0.061877 Jy ! Total flux subtracted in 100 components = 0.061877 Jy ! Clean residual min=-0.004589 max=0.005126 Jy/beam ! Clean residual mean=0.000001 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.061877 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.061877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105989Jy sigma=0.000593 ! Fit after self-cal, rms=0.104514Jy sigma=0.000584 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=14.65 mas, bpa=-20.78 degrees ! Estimated noise=902.317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047724 Jy ! Component: 100 - total flux cleaned = 0.00569468 Jy ! Component: 150 - total flux cleaned = 0.00563753 Jy ! Component: 200 - total flux cleaned = 0.00558875 Jy ! Total flux subtracted in 200 components = 0.00558875 Jy ! Clean residual min=-0.003492 max=0.002811 Jy/beam ! Clean residual mean=-0.000018 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0674658 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0674658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104220Jy sigma=0.000583 ! Fit after self-cal, rms=0.104133Jy sigma=0.000583 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.74 KP 1.04 ! LA 0.99 MK 1.09 NL 1.00* OV 1.09 ! PT 1.06 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.82 KP 1.05 ! LA 0.93 MK 1.13 NL 0.98 OV 1.12 ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.92 KP 1.01 ! LA 0.90 MK 1.11 NL 0.93 OV 1.05 ! PT 1.06 ! ! ! Correcting IF 4. ! A total of 426 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.80 KP 1.00* ! LA 1.00* MK 0.92 NL 1.00* OV 0.82 ! PT 1.03 ! ! ! Fit before self-cal, rms=0.104133Jy sigma=0.000583 ! Fit after self-cal, rms=0.100021Jy sigma=0.000584 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=14.84 mas, bpa=-20.78 degrees ! Estimated noise=917.787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291877 Jy ! Component: 100 - total flux cleaned = 0.000325106 Jy ! Component: 150 - total flux cleaned = 0.0003472 Jy ! Component: 200 - total flux cleaned = 0.00034613 Jy ! Total flux subtracted in 200 components = 0.00034613 Jy ! Clean residual min=-0.002301 max=0.002376 Jy/beam ! Clean residual mean=0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0678119 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.0678119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100003Jy sigma=0.000584 ! Fit after self-cal, rms=0.099778Jy sigma=0.000583 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099778Jy sigma=0.000583 ! Fit after self-cal, rms=0.097601Jy sigma=0.000582 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.824 mas, bmaj=14.82 mas, bpa=-20.71 degrees ! Estimated noise=912.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004156 Jy ! Component: 100 - total flux cleaned = 0.000416028 Jy ! Component: 150 - total flux cleaned = 0.000416238 Jy ! Component: 200 - total flux cleaned = 0.000405035 Jy ! Total flux subtracted in 200 components = 0.000405035 Jy ! Clean residual min=-0.001620 max=0.001626 Jy/beam ! Clean residual mean=-0.000006 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0682169 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0682169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097594Jy sigma=0.000582 ! Fit after self-cal, rms=0.097543Jy sigma=0.000581 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.95625e-05 Jy ! Component: 100 - total flux cleaned = 1.00961e-05 Jy ! Component: 150 - total flux cleaned = -1.47683e-05 Jy ! Component: 200 - total flux cleaned = -3.66608e-05 Jy ! Total flux subtracted in 200 components = -3.66608e-05 Jy ! Clean residual min=-0.001711 max=0.001585 Jy/beam ! Clean residual mean=-0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0681802 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.0681802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097539Jy sigma=0.000581 ! Fit after self-cal, rms=0.097539Jy sigma=0.000581 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097539Jy sigma=0.000581 ! Fit after self-cal, rms=0.097688Jy sigma=0.000581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.81 mas, bmaj=14.8 mas, bpa=-20.73 degrees ! Estimated noise=915.098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553276 Jy ! Component: 100 - total flux cleaned = 0.000614921 Jy ! Component: 150 - total flux cleaned = 0.00060276 Jy ! Component: 200 - total flux cleaned = 0.000603105 Jy ! Total flux subtracted in 200 components = 0.000603105 Jy ! Clean residual min=-0.001664 max=0.001573 Jy/beam ! Clean residual mean=-0.000007 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0687834 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0687834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097682Jy sigma=0.000581 ! Fit after self-cal, rms=0.097726Jy sigma=0.000581 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08241e-06 Jy ! Component: 100 - total flux cleaned = -2.02993e-05 Jy ! Component: 150 - total flux cleaned = -3.93113e-05 Jy ! Component: 200 - total flux cleaned = -5.58703e-05 Jy ! Total flux subtracted in 200 components = -5.58703e-05 Jy ! Clean residual min=-0.001663 max=0.001591 Jy/beam ! Clean residual mean=-0.000006 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0687275 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.0687275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097723Jy sigma=0.000581 ! Fit after self-cal, rms=0.097725Jy sigma=0.000581 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097725Jy sigma=0.000581 ! Fit after self-cal, rms=0.098138Jy sigma=0.000581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.53 mas, bmaj=29.76 mas, bpa=-7.339 degrees ! Estimated noise=1073.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517699 Jy ! Component: 100 - total flux cleaned = 0.000565995 Jy ! Component: 150 - total flux cleaned = 0.000580316 Jy ! Component: 200 - total flux cleaned = 0.000597518 Jy ! Total flux subtracted in 200 components = 0.000597518 Jy ! Clean residual min=-0.001481 max=0.001328 Jy/beam ! Clean residual mean=-0.000009 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.069325 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.069325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098134Jy sigma=0.000581 ! Fit after self-cal, rms=0.098160Jy sigma=0.000581 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.41201e-06 Jy ! Component: 100 - total flux cleaned = 3.49689e-06 Jy ! Component: 150 - total flux cleaned = 4.05614e-06 Jy ! Component: 200 - total flux cleaned = 1.04006e-05 Jy ! Total flux subtracted in 200 components = 1.04006e-05 Jy ! Clean residual min=-0.001500 max=0.001390 Jy/beam ! Clean residual mean=-0.000007 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0693354 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.0693354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098158Jy sigma=0.000581 ! Fit after self-cal, rms=0.098162Jy sigma=0.000581 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=14.81 mas, bpa=-20.73 degrees ! Estimated noise=918.543 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 14.81 at -20.73 degrees (North through East) ! Clean map min=-0.0016039 max=0.064426 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=11 mas, bpa=-23.11 degrees ! Estimated noise=1976.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512582 Jy ! Component: 100 - total flux cleaned = 0.0628247 Jy ! Component: 150 - total flux cleaned = 0.0669155 Jy ! Component: 200 - total flux cleaned = 0.0688093 Jy ! Total flux subtracted in 200 components = 0.0688093 Jy ! Clean residual min=-0.003992 max=0.003843 Jy/beam ! Clean residual mean=0.000010 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0688093 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0688093 Jy ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=14.81 mas, bpa=-20.73 degrees ! Estimated noise=918.543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000963422 Jy ! Component: 100 - total flux cleaned = 0.000911126 Jy ! Component: 150 - total flux cleaned = 0.000943791 Jy ! Component: 200 - total flux cleaned = 0.000890046 Jy ! Total flux subtracted in 200 components = 0.000890046 Jy ! Clean residual min=-0.001654 max=0.001723 Jy/beam ! Clean residual mean=-0.000005 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0696993 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.0696993 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.53 mas, bmaj=29.76 mas, bpa=-7.339 degrees ! Estimated noise=1073.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.60503e-05 Jy ! Component: 100 - total flux cleaned = -4.5133e-05 Jy ! Component: 150 - total flux cleaned = -7.01061e-05 Jy ! Component: 200 - total flux cleaned = -9.26408e-05 Jy ! Total flux subtracted in 200 components = -9.26408e-05 Jy ! Clean residual min=-0.001536 max=0.001386 Jy/beam ! Clean residual mean=-0.000007 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0696067 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01955e-05 Jy ! Component: 100 - total flux cleaned = -4.68095e-05 Jy ! Component: 150 - total flux cleaned = -6.32242e-05 Jy ! Component: 200 - total flux cleaned = -8.50408e-05 Jy ! Total flux subtracted in 200 components = -8.50408e-05 Jy ! Clean residual min=-0.001516 max=0.001393 Jy/beam ! Clean residual mean=-0.000007 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0695216 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0695216 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=14.81 mas, bpa=-20.73 degrees ! Estimated noise=918.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.25499e-05 Jy ! Component: 100 - total flux cleaned = 3.77641e-05 Jy ! Component: 150 - total flux cleaned = 9.15779e-06 Jy ! Component: 200 - total flux cleaned = -2.86891e-05 Jy ! Total flux subtracted in 200 components = -2.86891e-05 Jy ! Clean residual min=-0.001719 max=0.001658 Jy/beam ! Clean residual mean=-0.000005 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.069493 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.069493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098164Jy sigma=0.000581 ! Fit after self-cal, rms=0.098160Jy sigma=0.000581 wmodel J2222-3345_S_2017_09_26_pus_map.mod ! Writing 50 model components to file: J2222-3345_S_2017_09_26_pus_map.mod wobs J2222-3345_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2222-3345_S_2017_09_26_pus_uvs.fits wwins J2222-3345_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2222-3345_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.47873e-05 Jy ! Component: 100 - total flux cleaned = -0.000427793 Jy ! Component: 150 - total flux cleaned = -0.000691478 Jy ! Component: 200 - total flux cleaned = -0.000872041 Jy ! Component: 250 - total flux cleaned = -0.000935333 Jy ! Component: 300 - total flux cleaned = -0.00103737 Jy ! Component: 350 - total flux cleaned = -0.00111567 Jy ! Component: 400 - total flux cleaned = -0.00115368 Jy ! Component: 450 - total flux cleaned = -0.00124381 Jy ! Component: 500 - total flux cleaned = -0.00120824 Jy ! Component: 550 - total flux cleaned = -0.00117402 Jy ! Component: 600 - total flux cleaned = -0.00115755 Jy ! Component: 650 - total flux cleaned = -0.00119002 Jy ! Component: 700 - total flux cleaned = -0.00120585 Jy ! Component: 750 - total flux cleaned = -0.00126759 Jy ! Component: 800 - total flux cleaned = -0.00132784 Jy ! Component: 850 - total flux cleaned = -0.00134258 Jy ! Component: 900 - total flux cleaned = -0.00135744 Jy ! Component: 950 - total flux cleaned = -0.00147168 Jy ! Component: 1000 - total flux cleaned = -0.00152769 Jy ! Component: 1050 - total flux cleaned = -0.00161038 Jy ! Component: 1100 - total flux cleaned = -0.00170509 Jy ! Component: 1150 - total flux cleaned = -0.00179815 Jy ! Component: 1200 - total flux cleaned = -0.00188993 Jy ! Component: 1250 - total flux cleaned = -0.00195466 Jy ! Component: 1300 - total flux cleaned = -0.00206908 Jy ! Component: 1350 - total flux cleaned = -0.00216939 Jy ! Component: 1400 - total flux cleaned = -0.002219 Jy ! Component: 1450 - total flux cleaned = -0.00230466 Jy ! Component: 1500 - total flux cleaned = -0.00237702 Jy ! Component: 1550 - total flux cleaned = -0.00243641 Jy ! Component: 1600 - total flux cleaned = -0.00250687 Jy ! Component: 1650 - total flux cleaned = -0.00254178 Jy ! Component: 1700 - total flux cleaned = -0.00263374 Jy ! Component: 1750 - total flux cleaned = -0.00269059 Jy ! Component: 1800 - total flux cleaned = -0.00273559 Jy ! Component: 1850 - total flux cleaned = -0.00280253 Jy ! Component: 1900 - total flux cleaned = -0.00286875 Jy ! Component: 1950 - total flux cleaned = -0.00292341 Jy ! Component: 2000 - total flux cleaned = -0.0029885 Jy ! Component: 2050 - total flux cleaned = -0.00303146 Jy ! Component: 2100 - total flux cleaned = -0.00309524 Jy ! Component: 2150 - total flux cleaned = -0.00310592 Jy ! Component: 2200 - total flux cleaned = -0.00317931 Jy ! Component: 2250 - total flux cleaned = -0.00322081 Jy ! Component: 2300 - total flux cleaned = -0.00322077 Jy ! Component: 2350 - total flux cleaned = -0.00326164 Jy ! Component: 2400 - total flux cleaned = -0.00328191 Jy ! Component: 2450 - total flux cleaned = -0.00330208 Jy ! Component: 2500 - total flux cleaned = -0.00334224 Jy ! Component: 2550 - total flux cleaned = -0.00338204 Jy ! Component: 2600 - total flux cleaned = -0.0034018 Jy ! Component: 2650 - total flux cleaned = -0.00342145 Jy ! Component: 2700 - total flux cleaned = -0.00343122 Jy ! Component: 2750 - total flux cleaned = -0.00346037 Jy ! Component: 2800 - total flux cleaned = -0.0034604 Jy ! Component: 2850 - total flux cleaned = -0.00348921 Jy ! Component: 2900 - total flux cleaned = -0.00349875 Jy ! Component: 2950 - total flux cleaned = -0.00350833 Jy ! Component: 3000 - total flux cleaned = -0.00354625 Jy ! Component: 3050 - total flux cleaned = -0.00355568 Jy ! Component: 3100 - total flux cleaned = -0.00355571 Jy ! Component: 3150 - total flux cleaned = -0.00357436 Jy ! Component: 3200 - total flux cleaned = -0.00359287 Jy ! Component: 3250 - total flux cleaned = -0.00361133 Jy ! Component: 3300 - total flux cleaned = -0.00362051 Jy ! Component: 3350 - total flux cleaned = -0.00362962 Jy ! Component: 3400 - total flux cleaned = -0.00365685 Jy ! Component: 3450 - total flux cleaned = -0.00364772 Jy ! Component: 3500 - total flux cleaned = -0.00363868 Jy ! Component: 3550 - total flux cleaned = -0.00363872 Jy ! Component: 3600 - total flux cleaned = -0.00362077 Jy ! Component: 3650 - total flux cleaned = -0.00361181 Jy ! Component: 3700 - total flux cleaned = -0.00362066 Jy ! Component: 3750 - total flux cleaned = -0.00361173 Jy ! Component: 3800 - total flux cleaned = -0.00363827 Jy ! Component: 3850 - total flux cleaned = -0.00363827 Jy ! Component: 3900 - total flux cleaned = -0.00364707 Jy ! Component: 3950 - total flux cleaned = -0.0036559 Jy ! Component: 4000 - total flux cleaned = -0.00367345 Jy ! Component: 4050 - total flux cleaned = -0.00368228 Jy ! Total flux subtracted in 4096 components = -0.00369105 Jy ! Clean residual min=-0.000512 max=0.000520 Jy/beam ! Clean residual mean=-0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0658019 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 276 components and 0.0658019 Jy ![Exited script file: muppet] wmap "J2222-3345_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 14.81 at -20.73 degrees (North through East) ! Clean map min=-0.0015715 max=0.065105 Jy/beam ! Writing clean map to FITS file: J2222-3345_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0651048 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000154977 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714129 0.714129 1.42826 2.85652 5.71303 11.4261 22.8521 45.7043 91.4085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 14.81 at -20.73 degrees (North through East) ! Clean map min=-0.0015715 max=0.065105 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2222-3345_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:07:55 2019