! Started logfile: J2222-3345_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:50:14 2019 obs J2222-3345_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2222-3345_S_2017_03_27_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.491954 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2222-3345 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 12840 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2222-3345_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 781 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 647 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 590 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008994Jy sigma=0.006369 ! Fit after self-cal, rms=0.946239Jy sigma=0.005992 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.469 mas, bmaj=7.729 mas, bpa=1.926 degrees ! Estimated noise=2026.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483877 Jy ! Component: 100 - total flux cleaned = 0.0589515 Jy ! Total flux subtracted in 100 components = 0.0589515 Jy ! Clean residual min=-0.005701 max=0.005421 Jy/beam ! Clean residual mean=0.000006 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.0589515 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0589515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112486Jy sigma=0.000620 ! Fit after self-cal, rms=0.110615Jy sigma=0.000608 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=8.421 mas, bpa=0.6835 degrees ! Estimated noise=1269.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290544 Jy ! Component: 100 - total flux cleaned = 0.00366211 Jy ! Component: 150 - total flux cleaned = 0.00373811 Jy ! Component: 200 - total flux cleaned = 0.00373889 Jy ! Total flux subtracted in 200 components = 0.00373889 Jy ! Clean residual min=-0.003624 max=0.003938 Jy/beam ! Clean residual mean=0.000003 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.0626904 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0626903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110488Jy sigma=0.000608 ! Fit after self-cal, rms=0.110457Jy sigma=0.000607 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.99 HN 0.85 KP 1.11 ! LA 0.97 MK 1.07 NL 0.75 OV 1.15 ! PT 1.09 SC 0.98 ! ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.18 HN 0.71 KP 1.16 ! LA 0.95 MK 1.02 NL 0.72 OV 1.09 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.09 HN 0.91 KP 0.96 ! LA 0.94 MK 1.04 NL 0.87 OV 0.99 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.04 HN 0.83 KP 1.00* ! LA 1.00* MK 0.92 NL 1.00* OV 0.67 ! PT 1.02 SC 0.81 ! ! ! Fit before self-cal, rms=0.110457Jy sigma=0.000607 ! Fit after self-cal, rms=0.101655Jy sigma=0.000606 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=8.305 mas, bpa=1.058 degrees ! Estimated noise=1280.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473483 Jy ! Component: 100 - total flux cleaned = 0.000516631 Jy ! Component: 150 - total flux cleaned = 0.000536222 Jy ! Component: 200 - total flux cleaned = 0.000590876 Jy ! Total flux subtracted in 200 components = 0.000590876 Jy ! Clean residual min=-0.002947 max=0.003177 Jy/beam ! Clean residual mean=-0.000019 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0632812 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.0632812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101644Jy sigma=0.000606 ! Fit after self-cal, rms=0.101360Jy sigma=0.000605 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101360Jy sigma=0.000605 ! Fit after self-cal, rms=0.100566Jy sigma=0.000604 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=8.263 mas, bpa=1.256 degrees ! Estimated noise=1282.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104722 Jy ! Component: 100 - total flux cleaned = 0.00131004 Jy ! Component: 150 - total flux cleaned = 0.00134372 Jy ! Component: 200 - total flux cleaned = 0.00137535 Jy ! Total flux subtracted in 200 components = 0.00137535 Jy ! Clean residual min=-0.002814 max=0.002679 Jy/beam ! Clean residual mean=-0.000022 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0646566 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0646566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100554Jy sigma=0.000604 ! Fit after self-cal, rms=0.100505Jy sigma=0.000604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.95237e-05 Jy ! Component: 100 - total flux cleaned = -9.11808e-06 Jy ! Component: 150 - total flux cleaned = 3.43751e-06 Jy ! Component: 200 - total flux cleaned = -8.13144e-06 Jy ! Total flux subtracted in 200 components = -8.13144e-06 Jy ! Clean residual min=-0.002608 max=0.002515 Jy/beam ! Clean residual mean=-0.000018 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0646484 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0646484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100500Jy sigma=0.000604 ! Fit after self-cal, rms=0.100493Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100493Jy sigma=0.000604 ! Fit after self-cal, rms=0.100685Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=8.246 mas, bpa=1.312 degrees ! Estimated noise=1278.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186611 Jy ! Component: 100 - total flux cleaned = 0.000198864 Jy ! Component: 150 - total flux cleaned = 0.000197614 Jy ! Component: 200 - total flux cleaned = 0.000197127 Jy ! Total flux subtracted in 200 components = 0.000197127 Jy ! Clean residual min=-0.002537 max=0.002570 Jy/beam ! Clean residual mean=-0.000023 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0648456 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0648456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100682Jy sigma=0.000603 ! Fit after self-cal, rms=0.100710Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-93, -115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165338 Jy ! Component: 100 - total flux cleaned = 0.001521 Jy ! Component: 150 - total flux cleaned = 0.00141286 Jy ! Component: 200 - total flux cleaned = 0.00135399 Jy ! Total flux subtracted in 200 components = 0.00135399 Jy ! Clean residual min=-0.002395 max=0.002354 Jy/beam ! Clean residual mean=-0.000023 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0661996 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0661996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100653Jy sigma=0.000603 ! Fit after self-cal, rms=0.100617Jy sigma=0.000603 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100617Jy sigma=0.000603 ! Fit after self-cal, rms=0.100654Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.46 mas, bmaj=23.77 mas, bpa=6.539 degrees ! Estimated noise=1650.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125212 Jy ! Component: 100 - total flux cleaned = 0.00172264 Jy ! Component: 150 - total flux cleaned = 0.00174971 Jy ! Component: 200 - total flux cleaned = 0.00176194 Jy ! Total flux subtracted in 200 components = 0.00176194 Jy ! Clean residual min=-0.002972 max=0.001929 Jy/beam ! Clean residual mean=-0.000051 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0679615 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0679615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100633Jy sigma=0.000603 ! Fit after self-cal, rms=0.100645Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780496 Jy ! Component: 100 - total flux cleaned = 0.000810846 Jy ! Component: 150 - total flux cleaned = 0.000810924 Jy ! Component: 200 - total flux cleaned = 0.000810743 Jy ! Total flux subtracted in 200 components = 0.000810743 Jy ! Clean residual min=-0.003007 max=0.002012 Jy/beam ! Clean residual mean=-0.000051 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0687722 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.0687722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100635Jy sigma=0.000603 ! Fit after self-cal, rms=0.100618Jy sigma=0.000602 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=8.226 mas, bpa=1.281 degrees ! Estimated noise=1276.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.973 x 8.226 at 1.281 degrees (North through East) ! Clean map min=-0.0023419 max=0.060564 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=7.73 mas, bpa=2.036 degrees ! Estimated noise=1882.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475339 Jy ! Component: 100 - total flux cleaned = 0.0590167 Jy ! Component: 150 - total flux cleaned = 0.0643922 Jy ! Component: 200 - total flux cleaned = 0.0663892 Jy ! Total flux subtracted in 200 components = 0.0663892 Jy ! Clean residual min=-0.004310 max=0.004767 Jy/beam ! Clean residual mean=-0.000034 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.0663892 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0663892 Jy ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=8.226 mas, bpa=1.281 degrees ! Estimated noise=1276.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106644 Jy ! Component: 100 - total flux cleaned = 0.00131003 Jy ! Component: 150 - total flux cleaned = 0.00145932 Jy ! Component: 200 - total flux cleaned = 0.00162794 Jy ! Total flux subtracted in 200 components = 0.00162794 Jy ! Clean residual min=-0.002514 max=0.002381 Jy/beam ! Clean residual mean=-0.000025 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0680171 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.0680171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.46 mas, bmaj=23.77 mas, bpa=6.539 degrees ! Estimated noise=1650.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866324 Jy ! Component: 100 - total flux cleaned = 0.00104379 Jy ! Component: 150 - total flux cleaned = 0.00108366 Jy ! Component: 200 - total flux cleaned = 0.00110878 Jy ! Total flux subtracted in 200 components = 0.00110878 Jy ! Clean residual min=-0.003071 max=0.002103 Jy/beam ! Clean residual mean=-0.000049 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0691259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.40459e-05 Jy ! Component: 100 - total flux cleaned = 3.4973e-05 Jy ! Component: 150 - total flux cleaned = 4.64025e-05 Jy ! Component: 200 - total flux cleaned = 5.68396e-05 Jy ! Total flux subtracted in 200 components = 5.68396e-05 Jy ! Clean residual min=-0.003048 max=0.002073 Jy/beam ! Clean residual mean=-0.000049 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0691828 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0691827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=8.226 mas, bpa=1.281 degrees ! Estimated noise=1276.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344421 Jy ! Component: 100 - total flux cleaned = -0.000427348 Jy ! Component: 150 - total flux cleaned = -0.00047839 Jy ! Component: 200 - total flux cleaned = -0.000478635 Jy ! Total flux subtracted in 200 components = -0.000478635 Jy ! Clean residual min=-0.002424 max=0.002294 Jy/beam ! Clean residual mean=-0.000023 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0687041 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.0687041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100614Jy sigma=0.000602 ! Fit after self-cal, rms=0.100591Jy sigma=0.000602 wmodel J2222-3345_S_2017_03_27_pus_map.mod ! Writing 63 model components to file: J2222-3345_S_2017_03_27_pus_map.mod wobs J2222-3345_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2222-3345_S_2017_03_27_pus_uvs.fits wwins J2222-3345_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J2222-3345_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.49803e-05 Jy ! Component: 100 - total flux cleaned = 6.64096e-05 Jy ! Component: 150 - total flux cleaned = 0.000215383 Jy ! Component: 200 - total flux cleaned = 0.000215646 Jy ! Component: 250 - total flux cleaned = 0.000182185 Jy ! Component: 300 - total flux cleaned = 0.000117929 Jy ! Component: 350 - total flux cleaned = 8.68508e-05 Jy ! Component: 400 - total flux cleaned = 0.000176418 Jy ! Component: 450 - total flux cleaned = 0.000263097 Jy ! Component: 500 - total flux cleaned = 0.000377331 Jy ! Component: 550 - total flux cleaned = 0.000572586 Jy ! Component: 600 - total flux cleaned = 0.000789587 Jy ! Component: 650 - total flux cleaned = 0.000895718 Jy ! Component: 700 - total flux cleaned = 0.00105138 Jy ! Component: 750 - total flux cleaned = 0.00115289 Jy ! Component: 800 - total flux cleaned = 0.00125261 Jy ! Component: 850 - total flux cleaned = 0.0013017 Jy ! Component: 900 - total flux cleaned = 0.00134972 Jy ! Component: 950 - total flux cleaned = 0.00139661 Jy ! Component: 1000 - total flux cleaned = 0.00139688 Jy ! Component: 1050 - total flux cleaned = 0.00144269 Jy ! Component: 1100 - total flux cleaned = 0.00144305 Jy ! Component: 1150 - total flux cleaned = 0.00142162 Jy ! Component: 1200 - total flux cleaned = 0.001422 Jy ! Component: 1250 - total flux cleaned = 0.00142228 Jy ! Component: 1300 - total flux cleaned = 0.00140126 Jy ! Component: 1350 - total flux cleaned = 0.00133896 Jy ! Component: 1400 - total flux cleaned = 0.00129781 Jy ! Component: 1450 - total flux cleaned = 0.00117608 Jy ! Component: 1500 - total flux cleaned = 0.00115654 Jy ! Component: 1550 - total flux cleaned = 0.00117628 Jy ! Component: 1600 - total flux cleaned = 0.00109774 Jy ! Component: 1650 - total flux cleaned = 0.00109774 Jy ! Component: 1700 - total flux cleaned = 0.00105945 Jy ! Component: 1750 - total flux cleaned = 0.00104027 Jy ! Component: 1800 - total flux cleaned = 0.000965176 Jy ! Component: 1850 - total flux cleaned = 0.000928054 Jy ! Component: 1900 - total flux cleaned = 0.000872962 Jy ! Component: 1950 - total flux cleaned = 0.00087281 Jy ! Component: 2000 - total flux cleaned = 0.000836648 Jy ! Component: 2050 - total flux cleaned = 0.00085423 Jy ! Component: 2100 - total flux cleaned = 0.000783394 Jy ! Component: 2150 - total flux cleaned = 0.000765844 Jy ! Component: 2200 - total flux cleaned = 0.000713737 Jy ! Component: 2250 - total flux cleaned = 0.000713757 Jy ! Component: 2300 - total flux cleaned = 0.00071372 Jy ! Component: 2350 - total flux cleaned = 0.000696636 Jy ! Component: 2400 - total flux cleaned = 0.000629481 Jy ! Component: 2450 - total flux cleaned = 0.000612834 Jy ! Component: 2500 - total flux cleaned = 0.000579744 Jy ! Component: 2550 - total flux cleaned = 0.000563273 Jy ! Component: 2600 - total flux cleaned = 0.000530694 Jy ! Component: 2650 - total flux cleaned = 0.000449825 Jy ! Component: 2700 - total flux cleaned = 0.00046594 Jy ! Component: 2750 - total flux cleaned = 0.000465951 Jy ! Component: 2800 - total flux cleaned = 0.000465988 Jy ! Component: 2850 - total flux cleaned = 0.000434593 Jy ! Component: 2900 - total flux cleaned = 0.00045028 Jy ! Component: 2950 - total flux cleaned = 0.000434745 Jy ! Component: 3000 - total flux cleaned = 0.000434678 Jy ! Component: 3050 - total flux cleaned = 0.000419455 Jy ! Component: 3100 - total flux cleaned = 0.00044982 Jy ! Component: 3150 - total flux cleaned = 0.000464851 Jy ! Component: 3200 - total flux cleaned = 0.00052456 Jy ! Component: 3250 - total flux cleaned = 0.000524539 Jy ! Component: 3300 - total flux cleaned = 0.00050965 Jy ! Component: 3350 - total flux cleaned = 0.000524288 Jy ! Component: 3400 - total flux cleaned = 0.000553492 Jy ! Component: 3450 - total flux cleaned = 0.000553511 Jy ! Component: 3500 - total flux cleaned = 0.000539132 Jy ! Component: 3550 - total flux cleaned = 0.000553428 Jy ! Component: 3600 - total flux cleaned = 0.000581802 Jy ! Component: 3650 - total flux cleaned = 0.000581759 Jy ! Component: 3700 - total flux cleaned = 0.000638025 Jy ! Component: 3750 - total flux cleaned = 0.000680062 Jy ! Component: 3800 - total flux cleaned = 0.000693985 Jy ! Component: 3850 - total flux cleaned = 0.000735547 Jy ! Component: 3900 - total flux cleaned = 0.000776974 Jy ! Component: 3950 - total flux cleaned = 0.000818218 Jy ! Component: 4000 - total flux cleaned = 0.000859235 Jy ! Component: 4050 - total flux cleaned = 0.000859303 Jy ! Total flux subtracted in 4096 components = 0.000927079 Jy ! Clean residual min=-0.000867 max=0.000815 Jy/beam ! Clean residual mean=-0.000006 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.0696312 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 305 components and 0.0696312 Jy ![Exited script file: muppet] wmap "J2222-3345_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.973 x 8.226 at 1.281 degrees (North through East) ! Clean map min=-0.0019095 max=0.059734 Jy/beam ! Writing clean map to FITS file: J2222-3345_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0597335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228859 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1494 1.1494 2.2988 4.59761 9.19521 18.3904 36.7808 73.5617 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.973 x 8.226 at 1.281 degrees (North through East) ! Clean map min=-0.0019095 max=0.059734 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2222-3345_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:50:20 2019