! Started logfile: J2219+2120_S_2017_02_19_pus_uvs.log on Sat May 4 18:59:34 2019 obs J2219+2120_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2219+2120_S_2017_02_19_pus_uva.fits ! AN table 1: 157 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.677849 visibilities/baseline/integration-bin. ! Found source: J2219+2120 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 19156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2219+2120_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 707 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973264Jy sigma=0.008104 ! Fit after self-cal, rms=0.947426Jy sigma=0.007907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.009 mas, bpa=-6.617 degrees ! Estimated noise=1035.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429784 Jy ! Component: 100 - total flux cleaned = 0.0526071 Jy ! Total flux subtracted in 100 components = 0.0526071 Jy ! Clean residual min=-0.003490 max=0.003756 Jy/beam ! Clean residual mean=-0.000004 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.0526071 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0526071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084364Jy sigma=0.000649 ! Fit after self-cal, rms=0.083994Jy sigma=0.000646 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=6.981 mas, bpa=-5.248 degrees ! Estimated noise=675.089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391507 Jy ! Component: 100 - total flux cleaned = 0.00584067 Jy ! Component: 150 - total flux cleaned = 0.00694534 Jy ! Component: 200 - total flux cleaned = 0.00761373 Jy ! Total flux subtracted in 200 components = 0.00761373 Jy ! Clean residual min=-0.001949 max=0.002204 Jy/beam ! Clean residual mean=-0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0602208 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.0602208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083774Jy sigma=0.000645 ! Fit after self-cal, rms=0.083715Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.11 KP 1.02 ! LA 1.00 MK 1.02 NL 0.92 OV 1.06 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.15 KP 1.02 ! LA 1.01 MK 1.02 NL 1.08 OV 1.08 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.05 KP 0.89 ! LA 0.80 MK 1.04 NL 1.11 OV 0.98 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 0.98 KP 1.00* ! LA 0.86 MK 0.94 NL 1.00* OV 0.93 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.083715Jy sigma=0.000644 ! Fit after self-cal, rms=0.082304Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=7.013 mas, bpa=-4.939 degrees ! Estimated noise=679.865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504094 Jy ! Component: 100 - total flux cleaned = 0.000628547 Jy ! Component: 150 - total flux cleaned = 0.000674447 Jy ! Component: 200 - total flux cleaned = 0.000674872 Jy ! Total flux subtracted in 200 components = 0.000674872 Jy ! Clean residual min=-0.001895 max=0.002211 Jy/beam ! Clean residual mean=0.000006 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0608957 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0608957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082292Jy sigma=0.000642 ! Fit after self-cal, rms=0.082226Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082226Jy sigma=0.000642 ! Fit after self-cal, rms=0.081982Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=7.052 mas, bpa=-4.637 degrees ! Estimated noise=683.558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24131e-05 Jy ! Component: 100 - total flux cleaned = 8.23235e-06 Jy ! Component: 150 - total flux cleaned = -8.60949e-06 Jy ! Component: 200 - total flux cleaned = -3.92991e-05 Jy ! Total flux subtracted in 200 components = -3.92991e-05 Jy ! Clean residual min=-0.001834 max=0.002064 Jy/beam ! Clean residual mean=0.000005 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0608564 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0608564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081979Jy sigma=0.000641 ! Fit after self-cal, rms=0.081955Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (62.5, -121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153171 Jy ! Component: 100 - total flux cleaned = 0.00164193 Jy ! Component: 150 - total flux cleaned = 0.00190762 Jy ! Component: 200 - total flux cleaned = 0.00210267 Jy ! Total flux subtracted in 200 components = 0.00210267 Jy ! Clean residual min=-0.001689 max=0.001657 Jy/beam ! Clean residual mean=0.000004 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0629591 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0629591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081909Jy sigma=0.000640 ! Fit after self-cal, rms=0.081894Jy sigma=0.000640 ! Inverting map ! Added new window around map position (98.5, 123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154896 Jy ! Component: 100 - total flux cleaned = 0.0018761 Jy ! Component: 150 - total flux cleaned = 0.00190482 Jy ! Component: 200 - total flux cleaned = 0.0019854 Jy ! Total flux subtracted in 200 components = 0.0019854 Jy ! Clean residual min=-0.001732 max=0.001514 Jy/beam ! Clean residual mean=0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0649445 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.0649445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081857Jy sigma=0.000640 ! Fit after self-cal, rms=0.081844Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081844Jy sigma=0.000640 ! Fit after self-cal, rms=0.081743Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=7.058 mas, bpa=-4.705 degrees ! Estimated noise=682.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107727 Jy ! Component: 100 - total flux cleaned = 0.0012555 Jy ! Component: 150 - total flux cleaned = 0.00123117 Jy ! Component: 200 - total flux cleaned = 0.00129863 Jy ! Total flux subtracted in 200 components = 0.00129863 Jy ! Clean residual min=-0.001700 max=0.001559 Jy/beam ! Clean residual mean=0.000003 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0662431 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.0662431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081722Jy sigma=0.000639 ! Fit after self-cal, rms=0.081718Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418812 Jy ! Component: 100 - total flux cleaned = 0.000509532 Jy ! Component: 150 - total flux cleaned = 0.000529989 Jy ! Component: 200 - total flux cleaned = 0.000628217 Jy ! Total flux subtracted in 200 components = 0.000628217 Jy ! Clean residual min=-0.001692 max=0.001632 Jy/beam ! Clean residual mean=0.000003 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0668713 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.0668713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081706Jy sigma=0.000639 ! Fit after self-cal, rms=0.081706Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081706Jy sigma=0.000639 ! Fit after self-cal, rms=0.081687Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.847 mas, bmaj=9.584 mas, bpa=-2.532 degrees ! Estimated noise=863.129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438645 Jy ! Component: 100 - total flux cleaned = 0.000697448 Jy ! Component: 150 - total flux cleaned = 0.000768522 Jy ! Component: 200 - total flux cleaned = 0.000789808 Jy ! Total flux subtracted in 200 components = 0.000789808 Jy ! Clean residual min=-0.001701 max=0.002108 Jy/beam ! Clean residual mean=0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0676611 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.0676611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081681Jy sigma=0.000639 ! Fit after self-cal, rms=0.081684Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31, 114). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138294 Jy ! Component: 100 - total flux cleaned = 0.00165441 Jy ! Component: 150 - total flux cleaned = 0.00180272 Jy ! Component: 200 - total flux cleaned = 0.00180199 Jy ! Total flux subtracted in 200 components = 0.00180199 Jy ! Clean residual min=-0.001713 max=0.001534 Jy/beam ! Clean residual mean=-0.000002 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0694631 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 142 components and 0.0694631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081656Jy sigma=0.000639 ! Fit after self-cal, rms=0.081641Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=7.058 mas, bpa=-4.784 degrees ! Estimated noise=681.416 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 7.058 at -4.784 degrees (North through East) ! Clean map min=-0.0017859 max=0.056294 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=6.05 mas, bpa=-6.337 degrees ! Estimated noise=1061.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438208 Jy ! Component: 100 - total flux cleaned = 0.0540102 Jy ! Component: 150 - total flux cleaned = 0.0570247 Jy ! Component: 200 - total flux cleaned = 0.0590747 Jy ! Total flux subtracted in 200 components = 0.0590747 Jy ! Clean residual min=-0.002942 max=0.003142 Jy/beam ! Clean residual mean=0.000000 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0590747 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0590747 Jy ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=7.058 mas, bpa=-4.784 degrees ! Estimated noise=681.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311601 Jy ! Component: 100 - total flux cleaned = 0.00466855 Jy ! Component: 150 - total flux cleaned = 0.00571837 Jy ! Component: 200 - total flux cleaned = 0.00622915 Jy ! Total flux subtracted in 200 components = 0.00622915 Jy ! Clean residual min=-0.001645 max=0.001513 Jy/beam ! Clean residual mean=-0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0653038 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 54 components and 0.0653038 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.847 mas, bmaj=9.584 mas, bpa=-2.532 degrees ! Estimated noise=863.129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175265 Jy ! Component: 100 - total flux cleaned = 0.00268173 Jy ! Component: 150 - total flux cleaned = 0.0032324 Jy ! Component: 200 - total flux cleaned = 0.0035859 Jy ! Total flux subtracted in 200 components = 0.0035859 Jy ! Clean residual min=-0.001769 max=0.001595 Jy/beam ! Clean residual mean=-0.000004 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0688897 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321629 Jy ! Component: 100 - total flux cleaned = 0.000504462 Jy ! Component: 150 - total flux cleaned = 0.000608406 Jy ! Component: 200 - total flux cleaned = 0.000702194 Jy ! Total flux subtracted in 200 components = 0.000702194 Jy ! Clean residual min=-0.001727 max=0.001547 Jy/beam ! Clean residual mean=-0.000004 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0695919 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 121 components and 0.069592 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=7.058 mas, bpa=-4.784 degrees ! Estimated noise=681.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499673 Jy ! Component: 100 - total flux cleaned = 0.000613911 Jy ! Component: 150 - total flux cleaned = 0.000718321 Jy ! Component: 200 - total flux cleaned = 0.000813889 Jy ! Total flux subtracted in 200 components = 0.000813889 Jy ! Clean residual min=-0.001825 max=0.001495 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0704058 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.0704059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081638Jy sigma=0.000639 ! Fit after self-cal, rms=0.081627Jy sigma=0.000639 wmodel J2219+2120_S_2017_02_19_pus_map.mod ! Writing 148 model components to file: J2219+2120_S_2017_02_19_pus_map.mod wobs J2219+2120_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2219+2120_S_2017_02_19_pus_uvs.fits wwins J2219+2120_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J2219+2120_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000442135 Jy ! Component: 100 - total flux cleaned = -0.000597286 Jy ! Component: 150 - total flux cleaned = -0.000670474 Jy ! Component: 200 - total flux cleaned = -0.000785085 Jy ! Component: 250 - total flux cleaned = -0.000806826 Jy ! Component: 300 - total flux cleaned = -0.000784677 Jy ! Component: 350 - total flux cleaned = -0.000763618 Jy ! Component: 400 - total flux cleaned = -0.000844594 Jy ! Component: 450 - total flux cleaned = -0.00100303 Jy ! Component: 500 - total flux cleaned = -0.00102219 Jy ! Component: 550 - total flux cleaned = -0.00106081 Jy ! Component: 600 - total flux cleaned = -0.00109829 Jy ! Component: 650 - total flux cleaned = -0.001209 Jy ! Component: 700 - total flux cleaned = -0.00119068 Jy ! Component: 750 - total flux cleaned = -0.00124413 Jy ! Component: 800 - total flux cleaned = -0.00129665 Jy ! Component: 850 - total flux cleaned = -0.00134874 Jy ! Component: 900 - total flux cleaned = -0.00141693 Jy ! Component: 950 - total flux cleaned = -0.00150136 Jy ! Component: 1000 - total flux cleaned = -0.00145125 Jy ! Component: 1050 - total flux cleaned = -0.0015173 Jy ! Component: 1100 - total flux cleaned = -0.00155002 Jy ! Component: 1150 - total flux cleaned = -0.00159837 Jy ! Component: 1200 - total flux cleaned = -0.00167784 Jy ! Component: 1250 - total flux cleaned = -0.00170913 Jy ! Component: 1300 - total flux cleaned = -0.00178685 Jy ! Component: 1350 - total flux cleaned = -0.00183301 Jy ! Component: 1400 - total flux cleaned = -0.00186357 Jy ! Component: 1450 - total flux cleaned = -0.0019088 Jy ! Component: 1500 - total flux cleaned = -0.00196866 Jy ! Component: 1550 - total flux cleaned = -0.00204262 Jy ! Component: 1600 - total flux cleaned = -0.00213065 Jy ! Component: 1650 - total flux cleaned = -0.00214524 Jy ! Component: 1700 - total flux cleaned = -0.00223173 Jy ! Component: 1750 - total flux cleaned = -0.00230273 Jy ! Component: 1800 - total flux cleaned = -0.00237297 Jy ! Component: 1850 - total flux cleaned = -0.00240072 Jy ! Component: 1900 - total flux cleaned = -0.00245589 Jy ! Component: 1950 - total flux cleaned = -0.00253818 Jy ! Component: 2000 - total flux cleaned = -0.00260617 Jy ! Component: 2050 - total flux cleaned = -0.00271387 Jy ! Component: 2100 - total flux cleaned = -0.00271393 Jy ! Component: 2150 - total flux cleaned = -0.00281985 Jy ! Component: 2200 - total flux cleaned = -0.00288549 Jy ! Component: 2250 - total flux cleaned = -0.0029505 Jy ! Component: 2300 - total flux cleaned = -0.00296348 Jy ! Component: 2350 - total flux cleaned = -0.00302747 Jy ! Component: 2400 - total flux cleaned = -0.00310362 Jy ! Component: 2450 - total flux cleaned = -0.00316672 Jy ! Component: 2500 - total flux cleaned = -0.00325447 Jy ! Component: 2550 - total flux cleaned = -0.00329185 Jy ! Component: 2600 - total flux cleaned = -0.00332883 Jy ! Component: 2650 - total flux cleaned = -0.00343912 Jy ! Component: 2700 - total flux cleaned = -0.00343911 Jy ! Component: 2750 - total flux cleaned = -0.00357194 Jy ! Component: 2800 - total flux cleaned = -0.00363188 Jy ! Component: 2850 - total flux cleaned = -0.00364372 Jy ! Component: 2900 - total flux cleaned = -0.00375019 Jy ! Component: 2950 - total flux cleaned = -0.00379705 Jy ! Component: 3000 - total flux cleaned = -0.00382031 Jy ! Component: 3050 - total flux cleaned = -0.00390146 Jy ! Component: 3100 - total flux cleaned = -0.00393595 Jy ! Component: 3150 - total flux cleaned = -0.00397016 Jy ! Component: 3200 - total flux cleaned = -0.0040383 Jy ! Component: 3250 - total flux cleaned = -0.00410597 Jy ! Component: 3300 - total flux cleaned = -0.00409482 Jy ! Component: 3350 - total flux cleaned = -0.0042172 Jy ! Component: 3400 - total flux cleaned = -0.00427248 Jy ! Component: 3450 - total flux cleaned = -0.00432737 Jy ! Component: 3500 - total flux cleaned = -0.00437095 Jy ! Component: 3550 - total flux cleaned = -0.00440358 Jy ! Component: 3600 - total flux cleaned = -0.00448981 Jy ! Component: 3650 - total flux cleaned = -0.00454341 Jy ! Component: 3700 - total flux cleaned = -0.00461794 Jy ! Component: 3750 - total flux cleaned = -0.00463917 Jy ! Component: 3800 - total flux cleaned = -0.00470233 Jy ! Component: 3850 - total flux cleaned = -0.00471281 Jy ! Component: 3900 - total flux cleaned = -0.00482743 Jy ! Component: 3950 - total flux cleaned = -0.00481716 Jy ! Component: 4000 - total flux cleaned = -0.0048892 Jy ! Component: 4050 - total flux cleaned = -0.00493022 Jy ! Total flux subtracted in 4096 components = -0.0049506 Jy ! Clean residual min=-0.000659 max=0.000818 Jy/beam ! Clean residual mean=0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0654553 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 445 components and 0.0654553 Jy ![Exited script file: muppet] wmap "J2219+2120_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 7.058 at -4.784 degrees (North through East) ! Clean map min=-0.0014098 max=0.056053 Jy/beam ! Writing clean map to FITS file: J2219+2120_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.056053 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01799 1.01799 2.03597 4.07195 8.14389 16.2878 32.5756 65.1511 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 7.058 at -4.784 degrees (North through East) ! Clean map min=-0.0014098 max=0.056053 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2219+2120_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:59:39 2019