! Started logfile: J2213+3623_X_2017_08_12_pus_uvs.log on Fri May 10 15:30:01 2019 obs J2213+3623_X_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2213+3623_X_2017_08_12_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672531 visibilities/baseline/integration-bin. ! Found source: J2213+3623 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1049 lines of history. ! ! Reading 52296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2213+3623_X_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 283 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951165Jy sigma=0.008049 ! Fit after self-cal, rms=0.932882Jy sigma=0.007919 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7988 mas, bmaj=1.165 mas, bpa=-0.1343 degrees ! Estimated noise=1208.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513888 Jy ! Component: 100 - total flux cleaned = 0.0690238 Jy ! Total flux subtracted in 100 components = 0.0690238 Jy ! Clean residual min=-0.004601 max=0.008039 Jy/beam ! Clean residual mean=-0.000010 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.0690238 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0690238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083716Jy sigma=0.000657 ! Fit after self-cal, rms=0.083526Jy sigma=0.000655 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00981398 Jy ! Component: 100 - total flux cleaned = 0.0148271 Jy ! Total flux subtracted in 100 components = 0.0148271 Jy ! Clean residual min=-0.003792 max=0.004642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.0838509 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0838509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082223Jy sigma=0.000642 ! Fit after self-cal, rms=0.082169Jy sigma=0.000641 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.504 mas, bpa=-1.877 degrees ! Estimated noise=381.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499839 Jy ! Component: 100 - total flux cleaned = 0.00710755 Jy ! Component: 150 - total flux cleaned = 0.00759918 Jy ! Component: 200 - total flux cleaned = 0.00775553 Jy ! Total flux subtracted in 200 components = 0.00775553 Jy ! Clean residual min=-0.001385 max=0.001821 Jy/beam ! Clean residual mean=0.000005 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0916065 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.0916065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081925Jy sigma=0.000639 ! Fit after self-cal, rms=0.081882Jy sigma=0.000638 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.03 KP 1.02 ! LA 0.95 MK 1.06 NL 0.97 OV 0.99 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.95 KP 1.03 ! LA 0.96 MK 1.05 NL 0.97 OV 0.99 ! PT 1.05 SC 1.12 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.93 KP 0.96 ! LA 0.96 MK 1.26 NL 0.95 OV 0.99 ! PT 1.05 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.04 KP 1.03 ! LA 1.00 MK 1.04 NL 0.95 OV 1.00 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.98 KP 1.01 ! LA 0.97 MK 1.05 NL 1.01 OV 1.00 ! PT 1.02 SC 1.09 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.03 KP 1.00 ! LA 0.99 MK 1.14 NL 0.99 OV 0.99 ! PT 0.99 SC 1.14 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.90 KP 1.00 ! LA 1.00 MK 0.99 NL 0.96 OV 1.01 ! PT 1.02 SC 1.19 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.99 KP 1.01 ! LA 0.99 MK 1.01 NL 0.96 OV 0.99 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.99 KP 1.04 ! LA 0.98 MK 0.96 NL 0.97 OV 1.00 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.97 KP 1.01 ! LA 0.99 MK 1.05 NL 0.96 OV 1.01 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.95 KP 0.96 ! LA 0.97 MK 1.00 NL 0.98 OV 1.01 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.97 KP 1.00 ! LA 0.98 MK 1.03 NL 0.97 OV 1.00 ! PT 1.03 SC 0.87 ! ! ! Fit before self-cal, rms=0.081882Jy sigma=0.000638 ! Fit after self-cal, rms=0.082695Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=1.52 mas, bpa=-2.194 degrees ! Estimated noise=383.572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.1724e-05 Jy ! Component: 100 - total flux cleaned = -7.0582e-05 Jy ! Component: 150 - total flux cleaned = -4.04774e-05 Jy ! Component: 200 - total flux cleaned = -6.64393e-05 Jy ! Total flux subtracted in 200 components = -6.64393e-05 Jy ! Clean residual min=-0.001081 max=0.001273 Jy/beam ! Clean residual mean=0.000004 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.09154 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.09154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082666Jy sigma=0.000637 ! Fit after self-cal, rms=0.082695Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082695Jy sigma=0.000637 ! Fit after self-cal, rms=0.086411Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.503 mas, bpa=-0.5063 degrees ! Estimated noise=380.565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387963 Jy ! Component: 100 - total flux cleaned = 0.000475221 Jy ! Component: 150 - total flux cleaned = 0.000549396 Jy ! Component: 200 - total flux cleaned = 0.000630249 Jy ! Total flux subtracted in 200 components = 0.000630249 Jy ! Clean residual min=-0.000996 max=0.001063 Jy/beam ! Clean residual mean=0.000003 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.0921703 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.0921703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086393Jy sigma=0.000635 ! Fit after self-cal, rms=0.086482Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804216 Jy ! Component: 100 - total flux cleaned = 0.000776333 Jy ! Component: 150 - total flux cleaned = 0.00070143 Jy ! Component: 200 - total flux cleaned = 0.000634723 Jy ! Total flux subtracted in 200 components = 0.000634723 Jy ! Clean residual min=-0.000911 max=0.001092 Jy/beam ! Clean residual mean=0.000003 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.092805 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.092805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086463Jy sigma=0.000635 ! Fit after self-cal, rms=0.086459Jy sigma=0.000634 ! Inverting map ! Added new window around map position (1.6, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100538 Jy ! Component: 100 - total flux cleaned = 0.00112863 Jy ! Component: 150 - total flux cleaned = 0.00105035 Jy ! Component: 200 - total flux cleaned = 0.000981046 Jy ! Total flux subtracted in 200 components = 0.000981046 Jy ! Clean residual min=-0.000873 max=0.000995 Jy/beam ! Clean residual mean=0.000004 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.0937861 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.0937861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086437Jy sigma=0.000634 ! Fit after self-cal, rms=0.086433Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086433Jy sigma=0.000634 ! Fit after self-cal, rms=0.086615Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=1.495 mas, bpa=0.9466 degrees ! Estimated noise=376.541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465481 Jy ! Component: 100 - total flux cleaned = 0.000547801 Jy ! Component: 150 - total flux cleaned = 0.000594827 Jy ! Component: 200 - total flux cleaned = 0.000512438 Jy ! Total flux subtracted in 200 components = 0.000512438 Jy ! Clean residual min=-0.000856 max=0.000854 Jy/beam ! Clean residual mean=0.000003 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0942985 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.0942985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086599Jy sigma=0.000634 ! Fit after self-cal, rms=0.086612Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233447 Jy ! Component: 100 - total flux cleaned = 0.000215814 Jy ! Component: 150 - total flux cleaned = 0.000109161 Jy ! Component: 200 - total flux cleaned = 7.0813e-05 Jy ! Total flux subtracted in 200 components = 7.0813e-05 Jy ! Clean residual min=-0.000848 max=0.000874 Jy/beam ! Clean residual mean=0.000004 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0943693 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.0943693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086600Jy sigma=0.000634 ! Fit after self-cal, rms=0.086599Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086599Jy sigma=0.000634 ! Fit after self-cal, rms=0.086203Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.047 mas, bmaj=2.512 mas, bpa=-6.567 degrees ! Estimated noise=470.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114784 Jy ! Component: 100 - total flux cleaned = 7.41571e-05 Jy ! Component: 150 - total flux cleaned = -3.1184e-05 Jy ! Component: 200 - total flux cleaned = -0.000117459 Jy ! Total flux subtracted in 200 components = -0.000117459 Jy ! Clean residual min=-0.000833 max=0.000812 Jy/beam ! Clean residual mean=0.000006 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0942519 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.0942519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086200Jy sigma=0.000634 ! Fit after self-cal, rms=0.086206Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.77035e-05 Jy ! Component: 100 - total flux cleaned = -3.41867e-05 Jy ! Component: 150 - total flux cleaned = -0.000105519 Jy ! Component: 200 - total flux cleaned = -0.000185285 Jy ! Total flux subtracted in 200 components = -0.000185285 Jy ! Clean residual min=-0.000818 max=0.000805 Jy/beam ! Clean residual mean=0.000006 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0940666 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.0940666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086204Jy sigma=0.000634 ! Fit after self-cal, rms=0.086204Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.992 mas, bmaj=1.49 mas, bpa=2.147 degrees ! Estimated noise=373.339 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.992 x 1.49 at 2.147 degrees (North through East) ! Clean map min=-0.00090376 max=0.0646 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7844 mas, bmaj=1.165 mas, bpa=5.855 degrees ! Estimated noise=1161.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507756 Jy ! Component: 100 - total flux cleaned = 0.070597 Jy ! Component: 150 - total flux cleaned = 0.0805177 Jy ! Component: 200 - total flux cleaned = 0.0858537 Jy ! Total flux subtracted in 200 components = 0.0858537 Jy ! Clean residual min=-0.003819 max=0.003603 Jy/beam ! Clean residual mean=-0.000001 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0858537 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0858537 Jy ! Inverting map and beam ! Estimated beam: bmin=0.992 mas, bmaj=1.49 mas, bpa=2.147 degrees ! Estimated noise=373.339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447801 Jy ! Component: 100 - total flux cleaned = 0.00647812 Jy ! Component: 150 - total flux cleaned = 0.00740431 Jy ! Component: 200 - total flux cleaned = 0.00800953 Jy ! Total flux subtracted in 200 components = 0.00800953 Jy ! Clean residual min=-0.001099 max=0.001190 Jy/beam ! Clean residual mean=0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0938632 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.0938632 Jy ! Inverting map ! Added new window around map position (11, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00080755 Jy ! Component: 100 - total flux cleaned = 0.000983563 Jy ! Component: 150 - total flux cleaned = 0.0011128 Jy ! Component: 200 - total flux cleaned = 0.00123192 Jy ! Total flux subtracted in 200 components = 0.00123192 Jy ! Clean residual min=-0.001026 max=0.000995 Jy/beam ! Clean residual mean=0.000004 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0950952 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.0950952 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.047 mas, bmaj=2.512 mas, bpa=-6.567 degrees ! Estimated noise=470.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368095 Jy ! Component: 100 - total flux cleaned = 0.000494055 Jy ! Component: 150 - total flux cleaned = 0.000574175 Jy ! Component: 200 - total flux cleaned = 0.00059755 Jy ! Total flux subtracted in 200 components = 0.00059755 Jy ! Clean residual min=-0.000925 max=0.000732 Jy/beam ! Clean residual mean=0.000013 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.0956927 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10187e-05 Jy ! Component: 100 - total flux cleaned = -3.09182e-05 Jy ! Component: 150 - total flux cleaned = -6.00938e-05 Jy ! Component: 200 - total flux cleaned = -0.00010659 Jy ! Total flux subtracted in 200 components = -0.00010659 Jy ! Clean residual min=-0.000894 max=0.000700 Jy/beam ! Clean residual mean=0.000012 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0955861 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 70 components and 0.0955861 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.992 mas, bmaj=1.49 mas, bpa=2.147 degrees ! Estimated noise=373.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355671 Jy ! Component: 100 - total flux cleaned = -0.000476696 Jy ! Component: 150 - total flux cleaned = -0.00052113 Jy ! Component: 200 - total flux cleaned = -0.000563647 Jy ! Total flux subtracted in 200 components = -0.000563647 Jy ! Clean residual min=-0.000956 max=0.000886 Jy/beam ! Clean residual mean=0.000005 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0950225 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.0950225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086207Jy sigma=0.000634 ! Fit after self-cal, rms=0.086152Jy sigma=0.000633 wmodel J2213+3623_X_2017_08_12_pus_map.mod ! Writing 85 model components to file: J2213+3623_X_2017_08_12_pus_map.mod wobs J2213+3623_X_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2213+3623_X_2017_08_12_pus_uvs.fits wwins J2213+3623_X_2017_08_12_pus_map.win ! wwins: Wrote 4 windows to J2213+3623_X_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165333 Jy ! Component: 100 - total flux cleaned = 0.000320128 Jy ! Component: 150 - total flux cleaned = 0.00042253 Jy ! Component: 200 - total flux cleaned = 0.000562341 Jy ! Component: 250 - total flux cleaned = 0.000725123 Jy ! Component: 300 - total flux cleaned = 0.000883163 Jy ! Component: 350 - total flux cleaned = 0.00103735 Jy ! Component: 400 - total flux cleaned = 0.00113778 Jy ! Component: 450 - total flux cleaned = 0.00124828 Jy ! Component: 500 - total flux cleaned = 0.00129627 Jy ! Component: 550 - total flux cleaned = 0.00136704 Jy ! Component: 600 - total flux cleaned = 0.0014249 Jy ! Component: 650 - total flux cleaned = 0.00149333 Jy ! Component: 700 - total flux cleaned = 0.00153837 Jy ! Component: 750 - total flux cleaned = 0.00160472 Jy ! Component: 800 - total flux cleaned = 0.00163737 Jy ! Component: 850 - total flux cleaned = 0.00166954 Jy ! Component: 900 - total flux cleaned = 0.00165911 Jy ! Component: 950 - total flux cleaned = 0.00171131 Jy ! Component: 1000 - total flux cleaned = 0.00172167 Jy ! Component: 1050 - total flux cleaned = 0.00176243 Jy ! Component: 1100 - total flux cleaned = 0.00178264 Jy ! Component: 1150 - total flux cleaned = 0.00181219 Jy ! Component: 1200 - total flux cleaned = 0.00182193 Jy ! Component: 1250 - total flux cleaned = 0.0018606 Jy ! Component: 1300 - total flux cleaned = 0.00187955 Jy ! Component: 1350 - total flux cleaned = 0.00188881 Jy ! Component: 1400 - total flux cleaned = 0.00190729 Jy ! Component: 1450 - total flux cleaned = 0.00189827 Jy ! Component: 1500 - total flux cleaned = 0.00190739 Jy ! Component: 1550 - total flux cleaned = 0.00193436 Jy ! Component: 1600 - total flux cleaned = 0.00193441 Jy ! Component: 1650 - total flux cleaned = 0.00195191 Jy ! Component: 1700 - total flux cleaned = 0.00196925 Jy ! Component: 1750 - total flux cleaned = 0.00195206 Jy ! Component: 1800 - total flux cleaned = 0.00197766 Jy ! Component: 1850 - total flux cleaned = 0.00196095 Jy ! Component: 1900 - total flux cleaned = 0.00200258 Jy ! Component: 1950 - total flux cleaned = 0.00201087 Jy ! Component: 2000 - total flux cleaned = 0.00204355 Jy ! Total flux subtracted in 2048 components = 0.00203537 Jy ! Clean residual min=-0.000433 max=0.000480 Jy/beam ! Clean residual mean=0.000003 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0970579 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 229 components and 0.0970579 Jy ![Exited script file: muppet] wmap "J2213+3623_X_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.992 x 1.49 at 2.147 degrees (North through East) ! Clean map min=-0.00071391 max=0.063917 Jy/beam ! Writing clean map to FITS file: J2213+3623_X_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.063917 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145358 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.682251 0.682251 1.3645 2.72901 5.45801 10.916 21.832 43.6641 87.3282 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.992 x 1.49 at 2.147 degrees (North through East) ! Clean map min=-0.00071391 max=0.063917 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2213+3623_X_2017_08_12_pus_uvs.log closed on Fri May 10 15:30:05 2019