! Started logfile: J2213+3623_S_2017_08_12_pus_uvs.log on Fri May 10 15:09:06 2019 obs J2213+3623_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2213+3623_S_2017_08_12_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672531 visibilities/baseline/integration-bin. ! Found source: J2213+3623 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 17432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2213+3623_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1165 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923733Jy sigma=0.008860 ! Fit after self-cal, rms=0.917142Jy sigma=0.008804 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=4.632 mas, bpa=0.4958 degrees ! Estimated noise=1013.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0667288 Jy ! Component: 100 - total flux cleaned = 0.0813227 Jy ! Total flux subtracted in 100 components = 0.0813227 Jy ! Clean residual min=-0.003303 max=0.004280 Jy/beam ! Clean residual mean=0.000004 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0813227 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0813227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074646Jy sigma=0.000667 ! Fit after self-cal, rms=0.074642Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=5.57 mas, bpa=-1.379 degrees ! Estimated noise=658.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409203 Jy ! Component: 100 - total flux cleaned = 0.00595045 Jy ! Component: 150 - total flux cleaned = 0.00687807 Jy ! Component: 200 - total flux cleaned = 0.00738232 Jy ! Total flux subtracted in 200 components = 0.00738232 Jy ! Clean residual min=-0.001983 max=0.001792 Jy/beam ! Clean residual mean=0.000001 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.088705 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.088705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074409Jy sigma=0.000665 ! Fit after self-cal, rms=0.074408Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.94 KP 1.06 ! LA 1.03 MK 0.99 NL 0.92 OV 1.05 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.03 KP 0.99 ! LA 0.97 MK 1.03 NL 1.06 OV 1.04 ! PT 1.03 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.04 KP 0.94 ! LA 1.01 MK 1.04 NL 0.99 OV 0.98 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 195 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 1.00* ! LA 1.15 MK 1.04 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.074408Jy sigma=0.000665 ! Fit after self-cal, rms=0.073592Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=5.63 mas, bpa=-0.4442 degrees ! Estimated noise=663.187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333806 Jy ! Component: 100 - total flux cleaned = 0.000356663 Jy ! Component: 150 - total flux cleaned = 0.000356396 Jy ! Component: 200 - total flux cleaned = 0.000372655 Jy ! Total flux subtracted in 200 components = 0.000372655 Jy ! Clean residual min=-0.001778 max=0.001618 Jy/beam ! Clean residual mean=-0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0890777 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0890777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073589Jy sigma=0.000665 ! Fit after self-cal, rms=0.073579Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073579Jy sigma=0.000665 ! Fit after self-cal, rms=0.073342Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=5.632 mas, bpa=-0.4148 degrees ! Estimated noise=663.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.71332e-05 Jy ! Component: 100 - total flux cleaned = 0.000109336 Jy ! Component: 150 - total flux cleaned = 0.000137491 Jy ! Component: 200 - total flux cleaned = 0.000171404 Jy ! Total flux subtracted in 200 components = 0.000171404 Jy ! Clean residual min=-0.001787 max=0.001592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0892491 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0892491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073340Jy sigma=0.000663 ! Fit after self-cal, rms=0.073354Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.02127e-06 Jy ! Component: 100 - total flux cleaned = 1.56197e-05 Jy ! Component: 150 - total flux cleaned = 2.24589e-05 Jy ! Component: 200 - total flux cleaned = 2.92663e-05 Jy ! Total flux subtracted in 200 components = 2.92663e-05 Jy ! Clean residual min=-0.001781 max=0.001610 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0892783 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.0892783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073353Jy sigma=0.000663 ! Fit after self-cal, rms=0.073352Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073352Jy sigma=0.000663 ! Fit after self-cal, rms=0.073447Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=5.635 mas, bpa=-0.4968 degrees ! Estimated noise=663.871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.01655e-05 Jy ! Component: 100 - total flux cleaned = 7.13132e-05 Jy ! Component: 150 - total flux cleaned = 8.54275e-05 Jy ! Component: 200 - total flux cleaned = 9.21922e-05 Jy ! Total flux subtracted in 200 components = 9.21922e-05 Jy ! Clean residual min=-0.001760 max=0.001607 Jy/beam ! Clean residual mean=-0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0893705 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0893705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073446Jy sigma=0.000663 ! Fit after self-cal, rms=0.073448Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.15351e-06 Jy ! Component: 100 - total flux cleaned = 1.43876e-05 Jy ! Component: 150 - total flux cleaned = 2.61612e-05 Jy ! Component: 200 - total flux cleaned = 3.17216e-05 Jy ! Total flux subtracted in 200 components = 3.17216e-05 Jy ! Clean residual min=-0.001775 max=0.001606 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0894023 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0894023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073447Jy sigma=0.000663 ! Fit after self-cal, rms=0.073447Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073447Jy sigma=0.000663 ! Fit after self-cal, rms=0.073492Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.033 mas, bmaj=9.231 mas, bpa=-6.052 degrees ! Estimated noise=823.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113042 Jy ! Component: 100 - total flux cleaned = 0.000126739 Jy ! Component: 150 - total flux cleaned = 0.000134766 Jy ! Component: 200 - total flux cleaned = 0.000138069 Jy ! Total flux subtracted in 200 components = 0.000138069 Jy ! Clean residual min=-0.001631 max=0.001742 Jy/beam ! Clean residual mean=-0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0895403 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0895403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073492Jy sigma=0.000663 ! Fit after self-cal, rms=0.073492Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.40505e-06 Jy ! Component: 100 - total flux cleaned = 1.2047e-05 Jy ! Component: 150 - total flux cleaned = 1.50837e-05 Jy ! Component: 200 - total flux cleaned = 1.22216e-05 Jy ! Total flux subtracted in 200 components = 1.22216e-05 Jy ! Clean residual min=-0.001637 max=0.001742 Jy/beam ! Clean residual mean=-0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0895525 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0895526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073492Jy sigma=0.000663 ! Fit after self-cal, rms=0.073492Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=5.637 mas, bpa=-0.5379 degrees ! Estimated noise=664.225 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 5.637 at -0.5379 degrees (North through East) ! Clean map min=-0.0017261 max=0.085052 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=4.693 mas, bpa=2.124 degrees ! Estimated noise=1004.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0667228 Jy ! Component: 100 - total flux cleaned = 0.0813883 Jy ! Component: 150 - total flux cleaned = 0.0854535 Jy ! Component: 200 - total flux cleaned = 0.0875266 Jy ! Total flux subtracted in 200 components = 0.0875266 Jy ! Clean residual min=-0.002717 max=0.002724 Jy/beam ! Clean residual mean=0.000000 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0875266 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0875266 Jy ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=5.637 mas, bpa=-0.5379 degrees ! Estimated noise=664.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107197 Jy ! Component: 100 - total flux cleaned = 0.00146592 Jy ! Component: 150 - total flux cleaned = 0.00154835 Jy ! Component: 200 - total flux cleaned = 0.00161432 Jy ! Total flux subtracted in 200 components = 0.00161432 Jy ! Clean residual min=-0.001796 max=0.001615 Jy/beam ! Clean residual mean=-0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0891409 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.0891409 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.033 mas, bmaj=9.231 mas, bpa=-6.052 degrees ! Estimated noise=823.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225041 Jy ! Component: 100 - total flux cleaned = 0.000236986 Jy ! Component: 150 - total flux cleaned = 0.000241778 Jy ! Component: 200 - total flux cleaned = 0.000251336 Jy ! Total flux subtracted in 200 components = 0.000251336 Jy ! Clean residual min=-0.001630 max=0.001734 Jy/beam ! Clean residual mean=-0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0893922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.42819e-06 Jy ! Component: 100 - total flux cleaned = 8.58931e-06 Jy ! Component: 150 - total flux cleaned = 1.62325e-05 Jy ! Component: 200 - total flux cleaned = 2.35885e-05 Jy ! Total flux subtracted in 200 components = 2.35885e-05 Jy ! Clean residual min=-0.001631 max=0.001736 Jy/beam ! Clean residual mean=-0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0894158 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0894158 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=5.637 mas, bpa=-0.5379 degrees ! Estimated noise=664.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.2756e-05 Jy ! Component: 100 - total flux cleaned = -0.000106268 Jy ! Component: 150 - total flux cleaned = -0.000125146 Jy ! Component: 200 - total flux cleaned = -0.000133611 Jy ! Total flux subtracted in 200 components = -0.000133611 Jy ! Clean residual min=-0.001796 max=0.001612 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0892822 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0892822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073496Jy sigma=0.000663 ! Fit after self-cal, rms=0.073496Jy sigma=0.000663 wmodel J2213+3623_S_2017_08_12_pus_map.mod ! Writing 34 model components to file: J2213+3623_S_2017_08_12_pus_map.mod wobs J2213+3623_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2213+3623_S_2017_08_12_pus_uvs.fits wwins J2213+3623_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J2213+3623_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263284 Jy ! Component: 100 - total flux cleaned = -0.000234501 Jy ! Component: 150 - total flux cleaned = -0.000336812 Jy ! Component: 200 - total flux cleaned = -0.000410729 Jy ! Component: 250 - total flux cleaned = -0.000387369 Jy ! Component: 300 - total flux cleaned = -0.000502968 Jy ! Component: 350 - total flux cleaned = -0.000614873 Jy ! Component: 400 - total flux cleaned = -0.000680265 Jy ! Component: 450 - total flux cleaned = -0.00072299 Jy ! Component: 500 - total flux cleaned = -0.000764716 Jy ! Component: 550 - total flux cleaned = -0.000846726 Jy ! Component: 600 - total flux cleaned = -0.000926424 Jy ! Component: 650 - total flux cleaned = -0.00092615 Jy ! Component: 700 - total flux cleaned = -0.000906592 Jy ! Component: 750 - total flux cleaned = -0.00094437 Jy ! Component: 800 - total flux cleaned = -0.00100009 Jy ! Component: 850 - total flux cleaned = -0.0010184 Jy ! Component: 900 - total flux cleaned = -0.0011443 Jy ! Component: 950 - total flux cleaned = -0.00119709 Jy ! Component: 1000 - total flux cleaned = -0.00124917 Jy ! Component: 1050 - total flux cleaned = -0.00133495 Jy ! Component: 1100 - total flux cleaned = -0.00143633 Jy ! Component: 1150 - total flux cleaned = -0.00153615 Jy ! Component: 1200 - total flux cleaned = -0.00161823 Jy ! Component: 1250 - total flux cleaned = -0.00171513 Jy ! Component: 1300 - total flux cleaned = -0.00177911 Jy ! Component: 1350 - total flux cleaned = -0.00185801 Jy ! Component: 1400 - total flux cleaned = -0.00192039 Jy ! Component: 1450 - total flux cleaned = -0.00199717 Jy ! Component: 1500 - total flux cleaned = -0.00201239 Jy ! Component: 1550 - total flux cleaned = -0.00210227 Jy ! Component: 1600 - total flux cleaned = -0.00213172 Jy ! Component: 1650 - total flux cleaned = -0.00220494 Jy ! Component: 1700 - total flux cleaned = -0.00219044 Jy ! Component: 1750 - total flux cleaned = -0.0022907 Jy ! Component: 1800 - total flux cleaned = -0.00230505 Jy ! Component: 1850 - total flux cleaned = -0.00238902 Jy ! Component: 1900 - total flux cleaned = -0.00240279 Jy ! Component: 1950 - total flux cleaned = -0.00247156 Jy ! Component: 2000 - total flux cleaned = -0.00248525 Jy ! Component: 2050 - total flux cleaned = -0.00253914 Jy ! Component: 2100 - total flux cleaned = -0.00257894 Jy ! Component: 2150 - total flux cleaned = -0.00259224 Jy ! Component: 2200 - total flux cleaned = -0.00260548 Jy ! Component: 2250 - total flux cleaned = -0.00270869 Jy ! Component: 2300 - total flux cleaned = -0.00274713 Jy ! Component: 2350 - total flux cleaned = -0.00279773 Jy ! Component: 2400 - total flux cleaned = -0.00283542 Jy ! Component: 2450 - total flux cleaned = -0.00294752 Jy ! Component: 2500 - total flux cleaned = -0.0029721 Jy ! Component: 2550 - total flux cleaned = -0.00303337 Jy ! Component: 2600 - total flux cleaned = -0.00308186 Jy ! Component: 2650 - total flux cleaned = -0.00314186 Jy ! Component: 2700 - total flux cleaned = -0.00314197 Jy ! Component: 2750 - total flux cleaned = -0.00320104 Jy ! Component: 2800 - total flux cleaned = -0.00321253 Jy ! Component: 2850 - total flux cleaned = -0.00324738 Jy ! Component: 2900 - total flux cleaned = -0.00330491 Jy ! Component: 2950 - total flux cleaned = -0.00330496 Jy ! Component: 3000 - total flux cleaned = -0.00336179 Jy ! Component: 3050 - total flux cleaned = -0.00339572 Jy ! Component: 3100 - total flux cleaned = -0.00342938 Jy ! Component: 3150 - total flux cleaned = -0.00346264 Jy ! Component: 3200 - total flux cleaned = -0.00348456 Jy ! Component: 3250 - total flux cleaned = -0.00350648 Jy ! Component: 3300 - total flux cleaned = -0.0035501 Jy ! Component: 3350 - total flux cleaned = -0.00355015 Jy ! Component: 3400 - total flux cleaned = -0.00360376 Jy ! Component: 3450 - total flux cleaned = -0.00364628 Jy ! Component: 3500 - total flux cleaned = -0.0036885 Jy ! Component: 3550 - total flux cleaned = -0.00371991 Jy ! Component: 3600 - total flux cleaned = -0.00375108 Jy ! Component: 3650 - total flux cleaned = -0.00379252 Jy ! Component: 3700 - total flux cleaned = -0.00382339 Jy ! Component: 3750 - total flux cleaned = -0.0038541 Jy ! Component: 3800 - total flux cleaned = -0.00386434 Jy ! Component: 3850 - total flux cleaned = -0.00395512 Jy ! Component: 3900 - total flux cleaned = -0.00399531 Jy ! Component: 3950 - total flux cleaned = -0.00399531 Jy ! Component: 4000 - total flux cleaned = -0.00401525 Jy ! Component: 4050 - total flux cleaned = -0.00403481 Jy ! Total flux subtracted in 4096 components = -0.00404469 Jy ! Clean residual min=-0.000551 max=0.000654 Jy/beam ! Clean residual mean=-0.000002 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0852375 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 325 components and 0.0852375 Jy ![Exited script file: muppet] wmap "J2213+3623_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 5.637 at -0.5379 degrees (North through East) ! Clean map min=-0.0010591 max=0.085152 Jy/beam ! Writing clean map to FITS file: J2213+3623_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0851517 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169833 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.598343 0.598343 1.19669 2.39337 4.78675 9.57349 19.147 38.294 76.588 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 5.637 at -0.5379 degrees (North through East) ! Clean map min=-0.0010591 max=0.085152 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2213+3623_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:09:11 2019