! Started logfile: J2212-2518_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:37 2019 obs J2212-2518_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2212-2518_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.590097 visibilities/baseline/integration-bin. ! Found source: J2212-2518 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2212-2518_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 834 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997598Jy sigma=0.007474 ! Fit after self-cal, rms=0.950365Jy sigma=0.007124 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=11.97 mas, bpa=-18.96 degrees ! Estimated noise=1470.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408657 Jy ! Component: 100 - total flux cleaned = 0.0501895 Jy ! Total flux subtracted in 100 components = 0.0501895 Jy ! Clean residual min=-0.003965 max=0.004149 Jy/beam ! Clean residual mean=-0.000014 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.0501895 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0501895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088337Jy sigma=0.000621 ! Fit after self-cal, rms=0.087012Jy sigma=0.000612 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=14.52 mas, bpa=-18.53 degrees ! Estimated noise=1109.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539365 Jy ! Component: 100 - total flux cleaned = 0.00787409 Jy ! Component: 150 - total flux cleaned = 0.00924267 Jy ! Component: 200 - total flux cleaned = 0.00943619 Jy ! Total flux subtracted in 200 components = 0.00943619 Jy ! Clean residual min=-0.003016 max=0.003537 Jy/beam ! Clean residual mean=0.000001 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0596257 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.0596257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086650Jy sigma=0.000610 ! Fit after self-cal, rms=0.086522Jy sigma=0.000609 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 0.96 KP 1.03 ! LA 0.99 MK 1.10 NL 0.91 OV 1.00* ! PT 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.98 HN 1.00 KP 1.02 ! LA 0.95 MK 1.05 NL 1.00 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 0.97 KP 0.90 ! LA 0.83 MK 1.04 NL 1.12 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.87 KP 1.00* ! LA 1.00* MK 0.81 NL 1.00* OV 1.00* ! PT 1.06 ! ! ! Fit before self-cal, rms=0.086522Jy sigma=0.000609 ! Fit after self-cal, rms=0.084905Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=14.77 mas, bpa=-18.33 degrees ! Estimated noise=1116.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.87974e-05 Jy ! Component: 100 - total flux cleaned = -5.33431e-06 Jy ! Component: 150 - total flux cleaned = -6.41867e-05 Jy ! Component: 200 - total flux cleaned = -0.00011461 Jy ! Total flux subtracted in 200 components = -0.00011461 Jy ! Clean residual min=-0.002924 max=0.003636 Jy/beam ! Clean residual mean=0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.0595111 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0595111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084874Jy sigma=0.000608 ! Fit after self-cal, rms=0.084785Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084785Jy sigma=0.000607 ! Fit after self-cal, rms=0.085083Jy sigma=0.000606 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=14.83 mas, bpa=-18.52 degrees ! Estimated noise=1115.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329029 Jy ! Component: 100 - total flux cleaned = 0.000303738 Jy ! Component: 150 - total flux cleaned = 0.000231329 Jy ! Component: 200 - total flux cleaned = 0.000190408 Jy ! Total flux subtracted in 200 components = 0.000190408 Jy ! Clean residual min=-0.002643 max=0.003441 Jy/beam ! Clean residual mean=-0.000007 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0597015 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0597015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085062Jy sigma=0.000606 ! Fit after self-cal, rms=0.085085Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, 47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226559 Jy ! Component: 100 - total flux cleaned = 0.00288486 Jy ! Component: 150 - total flux cleaned = 0.00307336 Jy ! Component: 200 - total flux cleaned = 0.00323761 Jy ! Total flux subtracted in 200 components = 0.00323761 Jy ! Clean residual min=-0.002440 max=0.002245 Jy/beam ! Clean residual mean=0.000001 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0629391 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 69 components and 0.0629391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084981Jy sigma=0.000605 ! Fit after self-cal, rms=0.084909Jy sigma=0.000604 ! Inverting map ! Added new window around map position (-34.5, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277075 Jy ! Component: 100 - total flux cleaned = 0.00353125 Jy ! Component: 150 - total flux cleaned = 0.00401301 Jy ! Component: 200 - total flux cleaned = 0.00419703 Jy ! Total flux subtracted in 200 components = 0.00419703 Jy ! Clean residual min=-0.002175 max=0.001929 Jy/beam ! Clean residual mean=0.000004 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0671361 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 103 components and 0.0671361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084796Jy sigma=0.000604 ! Fit after self-cal, rms=0.084735Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084735Jy sigma=0.000603 ! Fit after self-cal, rms=0.084368Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=14.86 mas, bpa=-18.56 degrees ! Estimated noise=1105.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205698 Jy ! Component: 100 - total flux cleaned = 0.00289936 Jy ! Component: 150 - total flux cleaned = 0.00348189 Jy ! Component: 200 - total flux cleaned = 0.00375345 Jy ! Total flux subtracted in 200 components = 0.00375345 Jy ! Clean residual min=-0.002021 max=0.001844 Jy/beam ! Clean residual mean=0.000002 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0708895 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 116 components and 0.0708895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084291Jy sigma=0.000603 ! Fit after self-cal, rms=0.084254Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137202 Jy ! Component: 100 - total flux cleaned = 0.00196782 Jy ! Component: 150 - total flux cleaned = 0.00216304 Jy ! Component: 200 - total flux cleaned = 0.00212702 Jy ! Total flux subtracted in 200 components = 0.00212702 Jy ! Clean residual min=-0.001920 max=0.001906 Jy/beam ! Clean residual mean=0.000003 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0730165 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 127 components and 0.0730166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084204Jy sigma=0.000602 ! Fit after self-cal, rms=0.084182Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084182Jy sigma=0.000602 ! Fit after self-cal, rms=0.083964Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.515 mas, bmaj=23.66 mas, bpa=-8.174 degrees ! Estimated noise=1322.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010529 Jy ! Component: 100 - total flux cleaned = 0.0012341 Jy ! Component: 150 - total flux cleaned = 0.00131096 Jy ! Component: 200 - total flux cleaned = 0.00142475 Jy ! Total flux subtracted in 200 components = 0.00142475 Jy ! Clean residual min=-0.001628 max=0.001784 Jy/beam ! Clean residual mean=0.000005 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0744413 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 0.0744413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083948Jy sigma=0.000602 ! Fit after self-cal, rms=0.083958Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510707 Jy ! Component: 100 - total flux cleaned = 0.000611587 Jy ! Component: 150 - total flux cleaned = 0.000656878 Jy ! Component: 200 - total flux cleaned = 0.000699231 Jy ! Total flux subtracted in 200 components = 0.000699231 Jy ! Clean residual min=-0.001800 max=0.001882 Jy/beam ! Clean residual mean=0.000007 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0751405 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 172 components and 0.0751405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083947Jy sigma=0.000601 ! Fit after self-cal, rms=0.083957Jy sigma=0.000601 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=14.93 mas, bpa=-18.5 degrees ! Estimated noise=1100.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.3 x 14.93 at -18.5 degrees (North through East) ! Clean map min=-0.0025106 max=0.051972 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=12.28 mas, bpa=-18.69 degrees ! Estimated noise=1467.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413981 Jy ! Component: 100 - total flux cleaned = 0.0529666 Jy ! Component: 150 - total flux cleaned = 0.0582823 Jy ! Component: 200 - total flux cleaned = 0.0612937 Jy ! Total flux subtracted in 200 components = 0.0612937 Jy ! Clean residual min=-0.003703 max=0.003364 Jy/beam ! Clean residual mean=-0.000012 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0612936 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0612936 Jy ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=14.93 mas, bpa=-18.5 degrees ! Estimated noise=1100.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459333 Jy ! Component: 100 - total flux cleaned = 0.00707426 Jy ! Component: 150 - total flux cleaned = 0.00850841 Jy ! Component: 200 - total flux cleaned = 0.00951253 Jy ! Total flux subtracted in 200 components = 0.00951253 Jy ! Clean residual min=-0.002440 max=0.002298 Jy/beam ! Clean residual mean=-0.000004 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0708062 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 69 components and 0.0708062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.515 mas, bmaj=23.66 mas, bpa=-8.174 degrees ! Estimated noise=1322.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022006 Jy ! Component: 100 - total flux cleaned = 0.00308195 Jy ! Component: 150 - total flux cleaned = 0.00361644 Jy ! Component: 200 - total flux cleaned = 0.0040434 Jy ! Total flux subtracted in 200 components = 0.0040434 Jy ! Clean residual min=-0.002093 max=0.002102 Jy/beam ! Clean residual mean=0.000009 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0748496 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271447 Jy ! Component: 100 - total flux cleaned = 0.000345384 Jy ! Component: 150 - total flux cleaned = 0.000412356 Jy ! Component: 200 - total flux cleaned = 0.000443031 Jy ! Total flux subtracted in 200 components = 0.000443031 Jy ! Clean residual min=-0.001983 max=0.001871 Jy/beam ! Clean residual mean=0.000010 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0752926 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 130 components and 0.0752926 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=14.93 mas, bpa=-18.5 degrees ! Estimated noise=1100.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444577 Jy ! Component: 100 - total flux cleaned = 0.000444298 Jy ! Component: 150 - total flux cleaned = 0.000398509 Jy ! Component: 200 - total flux cleaned = 0.000442479 Jy ! Total flux subtracted in 200 components = 0.000442479 Jy ! Clean residual min=-0.001825 max=0.001955 Jy/beam ! Clean residual mean=0.000006 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0757351 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 160 components and 0.0757351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083973Jy sigma=0.000601 ! Fit after self-cal, rms=0.083969Jy sigma=0.000601 wmodel J2212-2518_S_2017_10_09_pus_map.mod ! Writing 160 model components to file: J2212-2518_S_2017_10_09_pus_map.mod wobs J2212-2518_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2212-2518_S_2017_10_09_pus_uvs.fits wwins J2212-2518_S_2017_10_09_pus_map.win ! wwins: Wrote 4 windows to J2212-2518_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198597 Jy ! Component: 100 - total flux cleaned = 0.000365109 Jy ! Component: 150 - total flux cleaned = 0.000642279 Jy ! Component: 200 - total flux cleaned = 0.000877194 Jy ! Component: 250 - total flux cleaned = 0.00112938 Jy ! Component: 300 - total flux cleaned = 0.00134611 Jy ! Component: 350 - total flux cleaned = 0.00158181 Jy ! Component: 400 - total flux cleaned = 0.0017833 Jy ! Component: 450 - total flux cleaned = 0.0019299 Jy ! Component: 500 - total flux cleaned = 0.00211957 Jy ! Component: 550 - total flux cleaned = 0.00225723 Jy ! Component: 600 - total flux cleaned = 0.00239219 Jy ! Component: 650 - total flux cleaned = 0.00256675 Jy ! Component: 700 - total flux cleaned = 0.00265202 Jy ! Component: 750 - total flux cleaned = 0.00275595 Jy ! Component: 800 - total flux cleaned = 0.0028167 Jy ! Component: 850 - total flux cleaned = 0.0028762 Jy ! Component: 900 - total flux cleaned = 0.00297304 Jy ! Component: 950 - total flux cleaned = 0.00304862 Jy ! Component: 1000 - total flux cleaned = 0.00306691 Jy ! Component: 1050 - total flux cleaned = 0.00312159 Jy ! Component: 1100 - total flux cleaned = 0.00315743 Jy ! Component: 1150 - total flux cleaned = 0.00319256 Jy ! Component: 1200 - total flux cleaned = 0.0032095 Jy ! Component: 1250 - total flux cleaned = 0.00315902 Jy ! Component: 1300 - total flux cleaned = 0.00315922 Jy ! Component: 1350 - total flux cleaned = 0.00312643 Jy ! Component: 1400 - total flux cleaned = 0.00307847 Jy ! Component: 1450 - total flux cleaned = 0.00304684 Jy ! Component: 1500 - total flux cleaned = 0.00296905 Jy ! Component: 1550 - total flux cleaned = 0.0029997 Jy ! Component: 1600 - total flux cleaned = 0.00298456 Jy ! Component: 1650 - total flux cleaned = 0.00298467 Jy ! Component: 1700 - total flux cleaned = 0.00298464 Jy ! Component: 1750 - total flux cleaned = 0.00297011 Jy ! Component: 1800 - total flux cleaned = 0.00295583 Jy ! Component: 1850 - total flux cleaned = 0.0029415 Jy ! Component: 1900 - total flux cleaned = 0.00294171 Jy ! Component: 1950 - total flux cleaned = 0.00291403 Jy ! Component: 2000 - total flux cleaned = 0.00285909 Jy ! Component: 2050 - total flux cleaned = 0.0028727 Jy ! Component: 2100 - total flux cleaned = 0.00280521 Jy ! Component: 2150 - total flux cleaned = 0.00279185 Jy ! Component: 2200 - total flux cleaned = 0.00279168 Jy ! Component: 2250 - total flux cleaned = 0.0027264 Jy ! Component: 2300 - total flux cleaned = 0.00272628 Jy ! Component: 2350 - total flux cleaned = 0.00267491 Jy ! Component: 2400 - total flux cleaned = 0.00266233 Jy ! Component: 2450 - total flux cleaned = 0.00264971 Jy ! Component: 2500 - total flux cleaned = 0.00262486 Jy ! Component: 2550 - total flux cleaned = 0.00263722 Jy ! Component: 2600 - total flux cleaned = 0.00258834 Jy ! Component: 2650 - total flux cleaned = 0.00257623 Jy ! Component: 2700 - total flux cleaned = 0.00252818 Jy ! Component: 2750 - total flux cleaned = 0.00252831 Jy ! Component: 2800 - total flux cleaned = 0.00250477 Jy ! Component: 2850 - total flux cleaned = 0.00249308 Jy ! Component: 2900 - total flux cleaned = 0.00248153 Jy ! Component: 2950 - total flux cleaned = 0.00246992 Jy ! Component: 3000 - total flux cleaned = 0.00245841 Jy ! Component: 3050 - total flux cleaned = 0.00246987 Jy ! Component: 3100 - total flux cleaned = 0.0024587 Jy ! Component: 3150 - total flux cleaned = 0.0024141 Jy ! Component: 3200 - total flux cleaned = 0.00243614 Jy ! Component: 3250 - total flux cleaned = 0.00243622 Jy ! Component: 3300 - total flux cleaned = 0.00243631 Jy ! Component: 3350 - total flux cleaned = 0.00244716 Jy ! Component: 3400 - total flux cleaned = 0.00243649 Jy ! Component: 3450 - total flux cleaned = 0.00242588 Jy ! Component: 3500 - total flux cleaned = 0.00243646 Jy ! Component: 3550 - total flux cleaned = 0.00243657 Jy ! Component: 3600 - total flux cleaned = 0.00244712 Jy ! Component: 3650 - total flux cleaned = 0.00242646 Jy ! Component: 3700 - total flux cleaned = 0.00243675 Jy ! Component: 3750 - total flux cleaned = 0.00243683 Jy ! Component: 3800 - total flux cleaned = 0.00240637 Jy ! Component: 3850 - total flux cleaned = 0.00240638 Jy ! Component: 3900 - total flux cleaned = 0.00239636 Jy ! Component: 3950 - total flux cleaned = 0.00238645 Jy ! Component: 4000 - total flux cleaned = 0.00236664 Jy ! Component: 4050 - total flux cleaned = 0.00235679 Jy ! Total flux subtracted in 4096 components = 0.00232739 Jy ! Clean residual min=-0.000511 max=0.000523 Jy/beam ! Clean residual mean=0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.0780625 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 455 components and 0.0780624 Jy ![Exited script file: muppet] wmap "J2212-2518_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.3 x 14.93 at -18.5 degrees (North through East) ! Clean map min=-0.0023142 max=0.052124 Jy/beam ! Writing clean map to FITS file: J2212-2518_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0521237 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179587 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03362 1.03362 2.06724 4.13449 8.26897 16.5379 33.0759 66.1518 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.3 x 14.93 at -18.5 degrees (North through East) ! Clean map min=-0.0023142 max=0.052124 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212-2518_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:42 2019